summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/cpuid.c
AgeCommit message (Collapse)Author
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-02-22kvm: x86: Return LA57 feature based on hardware capabilityYu Zhang
Previously, 'commit 372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: x86: expose MOVDIR64B CPU feature into VM.Liu Jingqi
MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity. Direct store is implemented by using write combining (WC) for writing data directly into memory without caching the data. Availability of the MOVDIR64B instruction is indicated by the presence of the CPUID feature flag MOVDIR64B (CPUID.0x07.0x0:ECX[bit 28]). This patch exposes the movdir64b feature to the guest. The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Cc: Xu Tao <tao3.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: x86: expose MOVDIRI CPU feature into VM.Liu Jingqi
MOVDIRI moves doubleword or quadword from register to memory through direct store which is implemented by using write combining (WC) for writing data directly into memory without caching the data. Availability of the MOVDIRI instruction is indicated by the presence of the CPUID feature flag MOVDIRI(CPUID.0x07.0x0:ECX[bit 27]). This patch exposes the movdiri feature to the guest. The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Cc: Xu Tao <tao3.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Add CPUID support for new instruction WBNOINVDRobert Hoo
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Add Intel Processor Trace cpuid emulationChao Peng
Expose Intel Processor Trace to guest only when the PT works in Host-Guest mode. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21KVM: x86: Remove KF() macro placeholderSean Christopherson
Although well-intentioned, keeping the KF() definition as a hint for handling scattered CPUID features may be counter-productive. Simply redefining the bit position only works for directly manipulating the guest's CPUID leafs, e.g. it doesn't make guest_cpuid_has() magically work. Taking an alternative approach, e.g. ensuring the bit position is identical between the Linux-defined and hardware-defined features, may be a simpler and/or more effective method of exposing scattered features to the guest. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-12-14kvm: x86: Report STIBP on GET_SUPPORTED_CPUIDEduardo Habkost
Months ago, we have added code to allow direct access to MSR_IA32_SPEC_CTRL to the guest, which makes STIBP available to guests. This was implemented by commits d28b387fb74d ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") and b2ac58f90540 ("KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL"). However, we never updated GET_SUPPORTED_CPUID to let userspace know that STIBP can be enabled in CPUID. Fix that by updating kvm_cpuid_8000_0008_ebx_x86_features and kvm_cpuid_7_0_edx_x86_features. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06KVM: X86: Implement "send IPI" hypercallWanpeng Li
Using hypercall to send IPIs by one vmexit instead of one by one for xAPIC/x2APIC physical mode and one vmexit per-cluster for x2APIC cluster mode. Intel guest can enter x2apic cluster mode when interrupt remmaping is enabled in qemu, however, latest AMD EPYC still just supports xapic mode which can get great improvement by Exit-less IPIs. This patchset lets a guest send multicast IPIs, with at most 128 destinations per hypercall in 64-bit mode and 64 vCPUs per hypercall in 32-bit mode. Hardware: Xeon Skylake 2.5GHz, 2 sockets, 40 cores, 80 threads, the VM is 80 vCPUs, IPI microbenchmark(https://lkml.org/lkml/2017/12/19/141): x2apic cluster mode, vanilla Dry-run: 0, 2392199 ns Self-IPI: 6907514, 15027589 ns Normal IPI: 223910476, 251301666 ns Broadcast IPI: 0, 9282161150 ns Broadcast lock: 0, 8812934104 ns x2apic cluster mode, pv-ipi Dry-run: 0, 2449341 ns Self-IPI: 6720360, 15028732 ns Normal IPI: 228643307, 255708477 ns Broadcast IPI: 0, 7572293590 ns => 22% performance boost Broadcast lock: 0, 8316124651 ns x2apic physical mode, vanilla Dry-run: 0, 3135933 ns Self-IPI: 8572670, 17901757 ns Normal IPI: 226444334, 255421709 ns Broadcast IPI: 0, 19845070887 ns Broadcast lock: 0, 19827383656 ns x2apic physical mode, pv-ipi Dry-run: 0, 2446381 ns Self-IPI: 6788217, 15021056 ns Normal IPI: 219454441, 249583458 ns Broadcast IPI: 0, 7806540019 ns => 154% performance boost Broadcast lock: 0, 9143618799 ns Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ...
2018-06-06x86/bugs: Add AMD's SPEC_CTRL MSR usageKonrad Rzeszutek Wilk
The AMD document outlining the SSBD handling 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf mentions that if CPUID 8000_0008.EBX[24] is set we should be using the SPEC_CTRL MSR (0x48) over the VIRT SPEC_CTRL MSR (0xC001_011f) for speculative store bypass disable. This in effect means we should clear the X86_FEATURE_VIRT_SSBD flag so that we would prefer the SPEC_CTRL MSR. See the document titled: 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199889 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: andrew.cooper3@citrix.com Cc: Joerg Roedel <joro@8bytes.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20180601145921.9500-3-konrad.wilk@oracle.com
2018-06-06x86/bugs: Add AMD's variant of SSB_NOKonrad Rzeszutek Wilk
The AMD document outlining the SSBD handling 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf mentions that the CPUID 8000_0008.EBX[26] will mean that the speculative store bypass disable is no longer needed. A copy of this document is available at: https://bugzilla.kernel.org/show_bug.cgi?id=199889 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: andrew.cooper3@citrix.com Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180601145921.9500-2-konrad.wilk@oracle.com
2018-05-26Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 store buffer fixes from Thomas Gleixner: "Two fixes for the SSBD mitigation code: - expose SSBD properly to guests. This got broken when the CPU feature flags got reshuffled. - simplify the CPU detection logic to avoid duplicate entries in the tables" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Simplify the CPU bug detection logic KVM/VMX: Expose SSBD properly to guests
2018-05-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "PPC: - Close a hole which could possibly lead to the host timebase getting out of sync. - Three fixes relating to PTEs and TLB entries for radix guests. - Fix a bug which could lead to an interrupt never getting delivered to the guest, if it is pending for a guest vCPU when the vCPU gets offlined. s390: - Fix false negatives in VSIE validity check (Cc stable) x86: - Fix time drift of VMX preemption timer when a guest uses LAPIC timer in periodic mode (Cc stable) - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow migration from hosts that don't need retpoline mitigation (Cc stable) - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and CPUID.OSXSAVE (Cc stable) - Report correct RIP after Hyper-V hypercall #UD (introduced in -rc6)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix #UD address of failed Hyper-V hypercalls kvm: x86: IA32_ARCH_CAPABILITIES is always supported KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed x86/kvm: fix LAPIC timer drift when guest uses periodic mode KVM: s390: vsie: fix < 8k check for the itdba KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change KVM: PPC: Book3S HV: Make radix clear pte when unmapping KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry
2018-05-24KVM: x86: Expose CLDEMOTE CPU feature to guest VMJingqi Liu
The CLDEMOTE instruction hints to hardware that the cache line that contains the linear address should be moved("demoted") from the cache(s) closest to the processor core to a level more distant from the processor core. This may accelerate subsequent accesses to the line by other cores in the same coherence domain, especially if the line was written by the core that demotes the line. This patch exposes the cldemote feature to the guest. The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf This patch has a dependency on https://lkml.org/lkml/2018/4/23/928 Signed-off-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-05-24kvm: x86: IA32_ARCH_CAPABILITIES is always supportedJim Mattson
If there is a possibility that a VM may migrate to a Skylake host, then the hypervisor should report IA32_ARCH_CAPABILITIES.RSBA[bit 2] as being set (future work, of course). This implies that CPUID.(EAX=7,ECX=0):EDX.ARCH_CAPABILITIES[bit 29] should be set. Therefore, kvm should report this CPUID bit as being supported whether or not the host supports it. Userspace is still free to clear the bit if it chooses. For more information on RSBA, see Intel's white paper, "Retpoline: A Branch Target Injection Mitigation" (Document Number 337131-001), currently available at https://bugzilla.kernel.org/show_bug.cgi?id=199511. Since the IA32_ARCH_CAPABILITIES MSR is emulated in kvm, there is no dependency on hardware support for this feature. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 28c1c9fabf48 ("KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES") Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-05-23KVM/VMX: Expose SSBD properly to guestsKonrad Rzeszutek Wilk
The X86_FEATURE_SSBD is an synthetic CPU feature - that is it bit location has no relevance to the real CPUID 0x7.EBX[31] bit position. For that we need the new CPU feature name. Fixes: 52817587e706 ("x86/cpufeatures: Disentangle SSBD enumeration") Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20180521215449.26423-2-konrad.wilk@oracle.com
2018-05-17KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBDTom Lendacky
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using speculative store bypass disable (SSBD) under SVM. This will allow guests to use SSBD on hardware that uses non-architectural mechanisms for enabling SSBD. [ tglx: Folded the migration fixup from Paolo Bonzini ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-05-17x86/speculation: Use synthetic bits for IBRS/IBPB/STIBPBorislav Petkov
Intel and AMD have different CPUID bits hence for those use synthetic bits which get set on the respective vendor's in init_speculation_control(). So that debacles like what the commit message of c65732e4f721 ("x86/cpu: Restore CPUID_8000_0008_EBX reload") talks about don't happen anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20180504161815.GG9257@pd.tnic
2018-05-09x86/bugs: Rename _RDS to _SSBDKonrad Rzeszutek Wilk
Intel collateral will reference the SSB mitigation bit in IA32_SPEC_CTL[2] as SSBD (Speculative Store Bypass Disable). Hence changing it. It is unclear yet what the MSR_IA32_ARCH_CAPABILITIES (0x10a) Bit(4) name is going to be. Following the rename it would be SSBD_NO but that rolls out to Speculative Store Bypass Disable No. Also fixed the missing space in X86_FEATURE_AMD_SSBD. [ tglx: Fixup x86_amd_rds_enable() and rds_tif_to_amd_ls_cfg() as well ] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-05-03x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guestKonrad Rzeszutek Wilk
Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various combinations of SPEC_CTRL MSR values. The handling of the MSR (to take into account the host value of SPEC_CTRL Bit(2)) is taken care of in patch: KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2018-03-16KVM: X86: Provide a capability to disable HLT interceptsWanpeng Li
If host CPUs are dedicated to a VM, we can avoid VM exits on HLT. This patch adds the per-VM capability to disable them. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-16KVM: x86: Add support for AMD Core Perf Extension in guestJanakarajan Natarajan
Add support for AMD Core Performance counters in the guest. The base event select and counter MSRs are changed. In addition, with the core extension, there are 2 extra counters available for performance measurements for a total of 6. With the new MSRs, the logic to map them to the gp_counters[] is changed. New functions are added to check the validity of the get/set MSRs. If the guest has the X86_FEATURE_PERFCTR_CORE cpuid flag set, the number of counters available to the vcpu is set to 6. It the flag is not set then it is 4. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> [Squashed "Expose AMD Core Perf Extension flag to guests" - Radim.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24KVM: x86: fix backward migration with async_PFRadim Krčmář
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT bit when enabling async_PF, but this bit is reserved on old hypervisors, which results in a failure upon migration. To avoid breaking different cases, we are checking for CPUID feature bit before enabling the feature and nothing else. Fixes: 52a5c155cf79 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode") Cc: <stable@vger.kernel.org> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-03KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRLKarimAllah Ahmed
[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ] Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for guests that will only mitigate Spectre V2 through IBRS+IBPB and will not be using a retpoline+IBPB based approach. To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for guests that do not actually use the MSR, only start saving and restoring when a non-zero is written to it. No attempt is made to handle STIBP here, intentionally. Filtering STIBP may be added in a future patch, which may require trapping all writes if we don't want to pass it through directly to the guest. [dwmw2: Clean up CPUID bits, save/restore manually, handle reset] Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de
2018-02-03KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIESKarimAllah Ahmed
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.de
2018-02-03KVM/x86: Add IBPB supportAshok Raj
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: kvm@vger.kernel.org Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de
2018-02-03KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDXKarimAllah Ahmed
[dwmw2: Stop using KF() for bits in it, too] Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Link: https://lkml.kernel.org/r/1517522386-18410-2-git-send-email-karahmed@amazon.de
2018-01-31KVM: x86: AMD Processor Topology InformationStanislav Lanci
This patch allow to enable x86 feature TOPOEXT. This is needed to provide information about SMT on AMD Zen CPUs to the guest. Signed-off-by: Stanislav Lanci <pixo@polepetko.eu> Tested-by: Nick Sarnie <commendsarnex@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-16Merge branch 'sev-v9-p2' of https://github.com/codomania/kvmPaolo Bonzini
This part of Secure Encrypted Virtualization (SEV) patch series focuses on KVM changes required to create and manage SEV guests. SEV is an extension to the AMD-V architecture which supports running encrypted virtual machine (VMs) under the control of a hypervisor. Encrypted VMs have their pages (code and data) secured such that only the guest itself has access to unencrypted version. Each encrypted VM is associated with a unique encryption key; if its data is accessed to a different entity using a different key the encrypted guest's data will be incorrectly decrypted, leading to unintelligible data. This security model ensures that hypervisor will no longer able to inspect or alter any guest code or data. The key management of this feature is handled by a separate processor known as the AMD Secure Processor (AMD-SP) which is present on AMD SOCs. The SEV Key Management Specification (see below) provides a set of commands which can be used by hypervisor to load virtual machine keys through the AMD-SP driver. The patch series adds a new ioctl in KVM driver (KVM_MEMORY_ENCRYPT_OP). The ioctl will be used by qemu to issue SEV guest-specific commands defined in Key Management Specification. The following links provide additional details: AMD Memory Encryption white paper: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf AMD64 Architecture Programmer's Manual: http://support.amd.com/TechDocs/24593.pdf SME is section 7.10 SEV is section 15.34 SEV Key Management: http://support.amd.com/TechDocs/55766_SEV-KM API_Specification.pdf KVM Forum Presentation: http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf SEV Guest BIOS support: SEV support has been add to EDKII/OVMF BIOS https://github.com/tianocore/edk2 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16KVM: X86: support paravirtualized help for TLB shootdownsWanpeng Li
When running on a virtual machine, IPIs are expensive when the target CPU is sleeping. Thus, it is nice to be able to avoid them for TLB shootdowns. KVM can just do the flush via INVVPID on the guest's behalf the next time the CPU is scheduled. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Use "&" to test the bit instead of "==". - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-12-14KVM: Expose new cpu features to guestYang Zhong
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/ VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features need expose to guest VM. The bit definition: CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2 CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf The kernel dependency commit in kvm.git: (c128dbfa0f879f8ce7b79054037889b0b2240728) Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-12-14KVM: x86: emulate RDPIDPaolo Bonzini
This is encoded as F3 0F C7 /7 with a register argument. The register argument is the second array in the group9 GroupDual, while F3 is the fourth element of a Prefix. Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14KVM: x86: add support for emulating UMIPPaolo Bonzini
The User-Mode Instruction Prevention feature present in recent Intel processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and str) from being executed with CPL > 0. Otherwise, a general protection fault is issued. UMIP instructions in general are also able to trigger vmexits, so we can actually emulate UMIP on older processors. This commit sets up the infrastructure so that kvm-intel.ko and kvm-amd.ko can set the UMIP feature bit for CPUID even if the feature is not actually available in hardware. Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14KVM: x86: add support for UMIPPaolo Bonzini
Add the CPUID bits, make the CR4.UMIP bit not reserved anymore, and add UMIP support for instructions that are already emulated by KVM. Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-04KVM: X86: Extend CPUID range to include new leafBrijesh Singh
This CPUID leaf provides the memory encryption support information on AMD Platform. Its complete description is available in APM volume 2, Section 15.34 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
2017-09-08Merge branch 'kvm-ppc-fixes' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc This fix was intended for 4.13, but didn't get in because both maintainers were on vacation. Paul Mackerras: "It adds mutual exclusion between list_add_rcu and list_del_rcu calls on the kvm->arch.spapr_tce_tables list. Without this, userspace could potentially trigger corruption of the list and cause a host crash or worse."
2017-08-25KVM: x86: block guest protection keys unless the host has them enabledPaolo Bonzini
If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870 Cc: stable@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24KVM: MMU: Expose the LA57 feature to VM.Yu Zhang
This patch exposes 5 level page table feature to the VM. At the same time, the canonical virtual address checking is extended to support both 48-bits and 57-bits address width. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24KVM: MMU: Add 5 level EPT & Shadow page table support.Yu Zhang
Extends the shadow paging code, so that 5 level shadow page table can be constructed if VM is running in 5 level paging mode. Also extends the ept code, so that 5 level ept table can be constructed if maxphysaddr of VM exceeds 48 bits. Unlike the shadow logic, KVM should still use 4 level ept table for a VM whose physical address width is less than 48 bits, even when the VM is running in 5 level paging mode. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> [Unconditionally reset the MMU context in kvm_cpuid_update. Changing MAXPHYADDR invalidates the reserved bit bitmasks. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24KVM: x86: Add return value to kvm_cpuid().Yu Zhang
Return false in kvm_cpuid() when it fails to find the cpuid entry. Also, this routine(and its caller) is optimized with a new argument - check_limit, so that the check_cpuid_limit() fall back can be avoided. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulationWanpeng Li
If "i" is the last element in the vcpu->arch.cpuid_entries[] array, it potentially can be exploited the vulnerability. this will out-of-bounds read and write. Luckily, the effect is small: /* when no next entry is found, the current entry[i] is reselected */ for (j = i + 1; ; j = (j + 1) % nent) { struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; if (ej->function == e->function) { It reads ej->maxphyaddr, which is user controlled. However... ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; After cpuid_entries there is int maxphyaddr; struct x86_emulate_ctxt emulate_ctxt; /* 16-byte aligned */ So we have: - cpuid_entries at offset 1B50 (6992) - maxphyaddr at offset 27D0 (6992 + 3200 = 10192) - padding at 27D4...27DF - emulate_ctxt at 27E0 And it writes in the padding. Pfew, writing the ops field of emulate_ctxt would have been much worse. This patch fixes it by modding the index to avoid the out-of-bounds access. Worst case, i == j and ej->function == e->function, the loop can bail out. Reported-by: Moguofang <moguofang@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Guofang Mo <moguofang@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-21KVM: x86: virtualize cpuid faultingKyle Huey
Hardware support for faulting on the cpuid instruction is not required to emulate it, because cpuid triggers a VM exit anyways. KVM handles the relevant MSRs (MSR_PLATFORM_INFO and MSR_MISC_FEATURES_ENABLE) and upon a cpuid-induced VM exit checks the cpuid faulting state and the CPL. kvm_require_cpl is even kind enough to inject the GP fault for us. Signed-off-by: Kyle Huey <khuey@kylehuey.com> Reviewed-by: David Matlack <dmatlack@google.com> [Return "1" from kvm_emulate_cpuid, it's not void. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-02sched/headers: Prepare to move sched_info_on() and force_schedstat_enabled() ↵Ingo Molnar
from <linux/sched.h> to <linux/sched/stat.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-17KVM: x86: remove code for lazy FPU handlingPaolo Bonzini
The FPU is always active now when running KVM. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20Revert "KVM: nested VMX: disable perf cpuid reporting"Jim Mattson
This reverts commit bc6134942dbbf31c25e9bd7c876be5da81c9e1ce. A CPUID instruction executed in VMX non-root mode always causes a VM-exit, regardless of the leaf being queried. Fixes: bc6134942dbb ("KVM: nested VMX: disable perf cpuid reporting") Signed-off-by: Jim Mattson <jmattson@google.com> [The issue solved by bc6134942dbb has been resolved with ff651cb613b4 ("KVM: nVMX: Add nested msr load/restore algorithm").] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-14 14:23:28 +0000