summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/trace.h
AgeCommit message (Collapse)Author
2016-06-16KVM: x86: support using the vmx preemption timer for tsc deadline timerYunhong Jiang
The VMX preemption timer can be used to virtualize the TSC deadline timer. The VMX preemption timer is armed when the vCPU is running, and a VMExit will happen if the virtual TSC deadline timer expires. When the vCPU thread is blocked because of HLT, KVM will switch to use an hrtimer, and then go back to the VMX preemption timer when the vCPU thread is unblocked. This solution avoids the complex OS's hrtimer system, and the host timer interrupt handling cost, replacing them with a little math (for guest->host TSC and host TSC->preemption timer conversion) and a cheaper VMexit. This benefits latency for isolated pCPUs. [A word about performance... Yunhong reported a 30% reduction in average latency from cyclictest. I made a similar test with tscdeadline_latency from kvm-unit-tests, and measured - ~20 clock cycles loss (out of ~3200, so less than 1% but still statistically significant) in the worst case where the test halts just after programming the TSC deadline timer - ~800 clock cycles gain (25% reduction in latency) in the best case where the test busy waits. I removed the VMX bits from Yunhong's patch, to concentrate them in the next patch - Paolo] Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-18svm: Add VMEXIT handlers for AVICSuravee Suthikulpanit
This patch introduces VMEXIT handlers, avic_incomplete_ipi_interception() and avic_unaccelerated_access_interception() along with two trace points (trace_kvm_avic_incomplete_ipi and trace_kvm_avic_unaccelerated_access). Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-13x86/vdso: Remove direct HPET access through the vDSOAndy Lutomirski
Allowing user code to map the HPET is problematic. HPET implementations are notoriously buggy, and there are probably many machines on which even MMIO reads from bogus HPET addresses are problematic. We have a report that the Dell Precision M2800 with: ACPI: HPET 0x00000000C8FE6238 000038 (v01 DELL CBX3 01072009 AMI. 00000005) is either so slow when accessing the HPET or actually hangs in some regard, causing soft lockups to be reported if users do unexpected things to the HPET. The vclock HPET code has also always been a questionable speedup. Accessing an HPET is exceedingly slow (on the order of several microseconds), so the added overhead in requiring a syscall to read the HPET is a small fraction of the total code of accessing it. To avoid future problems, let's just delete the code entirely. In the long run, this could actually be a speedup. Waiman Long as a patch to optimize the case where multiple CPUs contend for the HPET, but that won't help unless all the accesses are mediated by the kernel. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Waiman Long <waiman.long@hpe.com> Link: http://lkml.kernel.org/r/d2f90bba98db9905041cff294646d290d378f67a.1460074438.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-09KVM/VMX: Add host irq information in trace event when updating IRTE for ↵Feng Wu
posted interrupts Add host irq information in trace event, so we can better understand which irq is in posted mode. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08kvm/x86: Hyper-V SynIC timers tracepointsAndrey Smetanin
Trace the following Hyper SynIC timers events: * periodic timer start * one-shot timer start * timer callback * timer expiration and message delivery result * timer config setup * timer count setup * timer cleanup Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08kvm/x86: Hyper-V SynIC tracepointsAndrey Smetanin
Trace the following Hyper SynIC events: * set msr * set sint irq * ack sint * sint irq eoi Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25KVM: x86: correctly print #AC in tracesPaolo Bonzini
Poor #AC was so unimportant until a few days ago that we were not even tracing its name correctly. But now it's all over the place. Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Update IRTE for posted-interruptsFeng Wu
This patch adds the routine to update IRTE for posted-interrupts when guest changes the interrupt configuration. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> [Squashed in automatically generated patch from the build robot "KVM: x86: vcpu_to_pi_desc() can be static" - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm: add tracepoint for fast mmioJason Wang
Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04KVM: x86: save/load state on SMM switchPaolo Bonzini
The big ugly one. This patch adds support for switching in and out of system management mode, respectively upon receiving KVM_REQ_SMI and upon executing a RSM instruction. Both 32- and 64-bit formats are supported for the SMM state save area. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-30KVM: VMX: Add PML support in VMXKai Huang
This patch adds PML support in VMX. A new module parameter 'enable_pml' is added to allow user to enable/disable it manually. Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-08KVM: x86: add tracepoint to wait_lapic_expireMarcelo Tosatti
Add tracepoint to wait_lapic_expire. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> [Remind reader if early or late. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-08kvm: x86: add trace event for pvclock updatesDavid Matlack
The new trace event records: * the id of vcpu being updated * the pvclock_vcpu_time_info struct being written to guest memory This is useful for debugging pvclock bugs, such as the bug fixed by "[PATCH] kvm: x86: Fix kvm clock versioning.". Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11KVM: x86: make apic_accept_irq tracepoint more genericPaolo Bonzini
Initially the tracepoint was added only to the APIC_DM_FIXED case, also because it reported coalesced interrupts that only made sense for that case. However, the coalesced argument is not used anymore and tracing other delivery modes is useful, so hoist the call out of the switch statement. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25kvm: x86: fix tracing for 32-bitPaolo Bonzini
Fix commit 7b46268d29543e313e731606d845e65c17f232e4, which mistakenly included the new tracepoint under #ifdef CONFIG_X86_64. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-21KVM: trace kvm_ple_window grow/shrinkRadim Krčmář
Tracepoint for dynamic PLE window, fired on every potential change. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11KVM: emulate: put pointers in the fetch_cachePaolo Bonzini
This simplifies the code a bit, especially the overflow checks. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05KVM: x86: improve the usability of the 'kvm_pio' tracepointUlrich Obergfell
This patch moves the 'kvm_pio' tracepoint to emulator_pio_in_emulated() and emulator_pio_out_emulated(), and it adds an argument (a pointer to the 'pio_data'). A single 8-bit or 16-bit or 32-bit data item is fetched from 'pio_data' (depending on 'size'), and the value is included in the trace record ('val'). If 'count' is greater than one, this is indicated by the string "(...)" in the trace output. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-27kvm: Add a tracepoint write_tsc_offsetYoshihiro YUNOMAE
Add a tracepoint write_tsc_offset for tracing TSC offset change. We want to merge ftrace's trace data of guest OSs and the host OS using TSC for timestamp in chronological order. We need "TSC offset" values for each guest when merge those because the TSC value on a guest is always the host TSC plus guest's TSC offset. If we get the TSC offset values, we can calculate the host TSC value for each guest events from the TSC offset and the event TSC value. The host TSC values of the guest events are used when we want to merge trace data of guests and the host in chronological order. (Note: the trace_clock of both the host and the guest must be set x86-tsc in this case) This tracepoint also records vcpu_id which can be used to merge trace data for SMP guests. A merge tool will read TSC offset for each vcpu, then the tool converts guest TSC values to host TSC values for each vcpu. TSC offset is stored in the VMCS by vmx_write_tsc_offset() or vmx_adjust_tsc_offset(). KVM executes the former function when a guest boots. The latter function is executed when kvm clock is updated. Only host can read TSC offset value from VMCS, so a host needs to output TSC offset value when TSC offset is changed. Since the TSC offset is not often changed, it could be overwritten by other frequent events while tracing. To avoid that, I recommend to use a special instance for getting this event: 1. set a instance before booting a guest # cd /sys/kernel/debug/tracing/instances # mkdir tsc_offset # cd tsc_offset # echo x86-tsc > trace_clock # echo 1 > events/kvm/kvm_write_tsc_offset/enable 2. boot a guest Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-11-27KVM: x86: require matched TSC offsets for master clockMarcelo Tosatti
With master clock, a pvclock clock read calculates: ret = system_timestamp + [ (rdtsc + tsc_offset) - tsc_timestamp ] Where 'rdtsc' is the host TSC. system_timestamp and tsc_timestamp are unique, one tuple per VM: the "master clock". Given a host with synchronized TSCs, its obvious that guest TSC must be matched for the above to guarantee monotonicity. Allow master clock usage only if guest TSCs are synchronized. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27KVM: x86: implement PVCLOCK_TSC_STABLE_BIT pvclock flagMarcelo Tosatti
KVM added a global variable to guarantee monotonicity in the guest. One of the reasons for that is that the time between 1. ktime_get_ts(&timespec); 2. rdtscll(tsc); Is variable. That is, given a host with stable TSC, suppose that two VCPUs read the same time via ktime_get_ts() above. The time required to execute 2. is not the same on those two instances executing in different VCPUS (cache misses, interrupts...). If the TSC value that is used by the host to interpolate when calculating the monotonic time is the same value used to calculate the tsc_timestamp value stored in the pvclock data structure, and a single <system_timestamp, tsc_timestamp> tuple is visible to all vcpus simultaneously, this problem disappears. See comment on top of pvclock_update_vm_gtod_copy for details. Monotonicity is then guaranteed by synchronicity of the host TSCs and guest TSCs. Set TSC stable pvclock flag in that case, allowing the guest to read clock from userspace. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-09-21KVM: x86: Export svm/vmx exit code and vector code to userspaceXiao Guangrong
Exporting KVM exit information to userspace to be consumed by perf. Signed-off-by: Dong Hao <haodong@linux.vnet.ibm.com> [ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ] Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-24Merge tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Avi Kivity: "Highlights include - full big real mode emulation on pre-Westmere Intel hosts (can be disabled with emulate_invalid_guest_state=0) - relatively small ppc and s390 updates - PCID/INVPCID support in guests - EOI avoidance; 3.6 guests should perform better on 3.6 hosts on interrupt intensive workloads) - Lockless write faults during live migration - EPT accessed/dirty bits support for new Intel processors" Fix up conflicts in: - Documentation/virtual/kvm/api.txt: Stupid subchapter numbering, added next to each other. - arch/powerpc/kvm/booke_interrupts.S: PPC asm changes clashing with the KVM fixes - arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c: Duplicated commits through the kvm tree and the s390 tree, with subsequent edits in the KVM tree. * tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits) KVM: fix race with level interrupts x86, hyper: fix build with !CONFIG_KVM_GUEST Revert "apic: fix kvm build on UP without IOAPIC" KVM guest: switch to apic_set_eoi_write, apic_write apic: add apic_set_eoi_write for PV use KVM: VMX: Implement PCID/INVPCID for guests with EPT KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check KVM: PPC: Critical interrupt emulation support KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests KVM: PPC64: booke: Set interrupt computation mode for 64-bit host KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt KVM: PPC: bookehv64: Add support for std/ld emulation. booke: Added crit/mc exception handler for e500v2 booke/bookehv: Add host crit-watchdog exception support KVM: MMU: document mmu-lock and fast page fault KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint KVM: MMU: trace fast page fault KVM: MMU: fast path of handling guest page fault KVM: MMU: introduce SPTE_MMU_WRITEABLE bit KVM: MMU: fold tlb flush judgement into mmu_spte_update ...
2012-06-28tracing/kvm: Use __print_hex() for kvm_emulate_insn tracepointNamhyung Kim
The kvm_emulate_insn tracepoint used __print_insn() for printing its instructions. However it makes the format of the event hard to parse as it reveals TP internals. Fortunately, kernel provides __print_hex for almost same purpose, we can use it instead of open coding it. The user-space can be changed to parse it later. That means raw kernel tracing will not be affected by this change: # cd /sys/kernel/debug/tracing/ # cat events/kvm/kvm_emulate_insn/format name: kvm_emulate_insn ID: 29 format: ... print fmt: "%x:%llx:%s (%s)%s", REC->csbase, REC->rip, __print_hex(REC->insn, REC->len), \ __print_symbolic(REC->flags, { 0, "real" }, { (1 << 0) | (1 << 1), "vm16" }, \ { (1 << 0), "prot16" }, { (1 << 0) | (1 << 2), "prot32" }, { (1 << 0) | (1 << 3), "prot64" }), \ REC->failed ? " failed" : "" # echo 1 > events/kvm/kvm_emulate_insn/enable # cat trace # tracer: nop # # entries-in-buffer/entries-written: 2183/2183 #P:12 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | qemu-kvm-1782 [002] ...1 140.931636: kvm_emulate_insn: 0:c102fa25:89 10 (prot32) qemu-kvm-1781 [004] ...1 140.931637: kvm_emulate_insn: 0:c102fa25:89 10 (prot32) Link: http://lkml.kernel.org/n/tip-wfw6y3b9ugtey8snaow9nmg5@git.kernel.org Link: http://lkml.kernel.org/r/1340757701-10711-2-git-send-email-namhyung@kernel.org Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: kvm@vger.kernel.org Acked-by: Avi Kivity <avi@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-25KVM: host side for eoi optimizationMichael S. Tsirkin
Implementation of PV EOI using shared memory. This reduces the number of exits an interrupt causes as much as by half. The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. We set it before injecting an interrupt and clear before injecting a nested one. Guest tests it using a test and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. There's a new MSR to set the address of said register in guest memory. Otherwise not much changed: - Guest EOI is not required - Register is tested & ISR is automatically cleared on exit For testing results see description of previous patch 'kvm_para: guest side for eoi avoidance'. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25KVM: Use __print_symbolic() for vmexit tracepointsStefan Hajnoczi
The vmexit tracepoints format the exit_reason to make it human-readable. Since the exit_reason depends on the instruction set (vmx or svm), formatting is handled with ftrace_print_symbols_seq() by referring to the appropriate exit reason table. However, the ftrace_print_symbols_seq() function is not meant to be used directly in tracepoints since it does not export the formatting table which userspace tools like trace-cmd and perf use to format traces. In practice perf dies when formatting vmexit-related events and trace-cmd falls back to printing the numeric value (with extra formatting code in the kvm plugin to paper over this limitation). Other userspace consumers of vmexit-related tracepoints would be in similar trouble. To avoid significant changes to the kvm_exit tracepoint, this patch moves the vmx and svm exit reason tables into arch/x86/kvm/trace.h and selects the right table with __print_symbolic() depending on the instruction set. Note that __print_symbolic() is designed for exporting the formatting table to userspace and allows trace-cmd and perf to work. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25KVM: Record instruction set in all vmexit tracepointsStefan Hajnoczi
The kvm_exit tracepoint recently added the isa argument to aid decoding exit_reason. The semantics of exit_reason depend on the instruction set (vmx or svm) and the isa argument allows traces to be analyzed on other machines. Add the isa argument to kvm_nested_vmexit and kvm_nested_vmexit_inject so these tracepoints can also be self-describing. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24KVM: MMU: trace mmio page faultXiao Guangrong
Add tracepoints to trace mmio page fault Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: x86 emulator: fold decode_cache into x86_emulate_ctxtAvi Kivity
This saves a lot of pointless casts x86_emulate_ctxt and decode_cache. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: x86 emulator: rename decode_cache::eip to _eipAvi Kivity
The name eip conflicts with a field of the same name in x86_emulate_ctxt, which we plan to fold decode_cache into. The name _eip is unfortunate, but what's really needed is a refactoring here, not a better name. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-10tracing: Fix event alignment: kvm:kvm_hv_hypercallDavid Sharp
Acked-by: Avi Kivity <avi@redhat.com> Signed-off-by: David Sharp <dhsharp@google.com> LKML-Reference: <1291421609-14665-8-git-send-email-dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-12KVM: Add instruction-set-specific exit qualifications to kvm_exit traceAvi Kivity
The exit reason alone is insufficient to understand exactly why an exit occured; add ISA-specific trace parameters for additional information. Because fetching these parameters is expensive on vmx, and because these parameters are fetched even if tracing is disabled, we fetch the parameters via a callback instead of as traditional trace arguments. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: Record instruction set in kvm_exit tracepointAvi Kivity
exit_reason's meaning depend on the instruction set; record it so a trace taken on one machine can be interpreted on another. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: Trace emulated instructionsAvi Kivity
Log emulated instructions in ftrace, especially if they failed. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Trace exception injectionAvi Kivity
Often an exception can help point out where things start to go wrong. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: Move kvm_exit tracepoint rip reading inside tracepointAvi Kivity
Reading rip is expensive on vmx, so move it inside the tracepoint so we only incur the cost if tracing is enabled. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: cleanup kvm traceXiao Guangrong
This patch does: - no need call tracepoint_synchronize_unregister() when kvm module is unloaded since ftrace can handle it - cleanup ftrace's macro Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25KVM: SVM: Add kvm_nested_intercepts tracepointJoerg Roedel
This patch adds a tracepoint to get information about the most important intercept bitmasks from the nested vmcb. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25KVM: SVM: Remove newlines from nested trace pointsJoerg Roedel
The tracing infrastructure adds its own newlines. Remove them from the trace point printk format strings. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Trace failed msr reads and writesAvi Kivity
Record failed msrs reads and writes, and the fact that they failed as well. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Fix msr traceAvi Kivity
- data is 64 bits wide, not unsigned long - rw is confusingly named Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Implement bare minimum of HYPER-V MSRsGleb Natapov
Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and VP_INDEX MSRs. [avi: fix build on i386] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for skinit instructionJoerg Roedel
This patch adds a tracepoint for the event that the guest executed the SKINIT instruction. This information is important because SKINIT is an SVM extenstion not yet implemented by nested SVM and we may need this information for debugging hypervisors that do not yet run on nested SVM. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for invlpga instructionJoerg Roedel
This patch adds a tracepoint for the event that the guest executed the INVLPGA instruction. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for #vmexit because intr pendingJoerg Roedel
This patch adds a special tracepoint for the event that a nested #vmexit is injected because kvm wants to inject an interrupt into the guest. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for injected #vmexitJoerg Roedel
This patch adds a tracepoint for a nested #vmexit that gets re-injected to the guest. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for nested #vmexitJoerg Roedel
This patch adds a tracepoint for every #vmexit we get from a nested guest. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: SVM: Add tracepoint for nested vmrunJoerg Roedel
This patch adds a dedicated kvm tracepoint for a nested vmrun. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-09-10KVM: Add trace points in irqchip codeGleb Natapov
Add tracepoint in msi/ioapic/pic set_irq() functions, in IPI sending and in the point where IRQ is placed into apic's IRR. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>