| Age | Commit message (Collapse) | Author |
|---|
|
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
|
|
'hv_evmcs_vmptr'/'hv_evmcs_map'/'hv_evmcs' fields in 'struct nested_vmx'
should not be used when !CONFIG_KVM_HYPERV, hide them when
!CONFIG_KVM_HYPERV.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-16-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In preparation for making Hyper-V emulation optional, move Hyper-V specific
guest_cpuid_has_evmcs() to hyperv.h.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-12-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Stub in vmx_get_untagged_addr() and wire up calls from the emulator (via
get_untagged_addr()) and "direct" calls from various VM-Exit handlers in
VMX where LAM untagging is supposed to be applied. Defer implementing
the guts of vmx_get_untagged_addr() to future patches purely to make the
changes easier to consume.
LAM is active only for 64-bit linear addresses and several types of
accesses are exempted.
- Cases need to untag address (handled in get_vmx_mem_address())
Operand(s) of VMX instructions and INVPCID.
Operand(s) of SGX ENCLS.
- Cases LAM doesn't apply to (no change needed)
Operand of INVLPG.
Linear address in INVPCID descriptor.
Linear address in INVVPID descriptor.
BASEADDR specified in SECS of ECREATE.
Note:
- LAM doesn't apply to write to control registers or MSRs
- LAM masking is applied before walking page tables, i.e. the faulting
linear address in CR2 doesn't contain the metadata.
- The guest linear address saved in VMCS doesn't contain metadata.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-10-binbin.wu@linux.intel.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "VMX exposed to L1" via a governed feature flag instead of using a
dedicated helper to provide the same functionality. The main goal is to
drive convergence between VMX and SVM with respect to querying features
that are controllable via module param (SVM likes to cache nested
features), avoiding the guest CPUID lookups at runtime is just a bonus
and unlikely to provide any meaningful performance benefits.
Note, X86_FEATURE_VMX is set in kvm_cpu_caps if and only if "nested" is
true, and the CPU obviously supports VMX if KVM+VMX is running. I.e. the
check on "nested" is now implicitly down by the kvm_cpu_cap_has() check
in kvm_governed_feature_check_and_set().
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Reviwed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename the XSAVES secondary execution control to follow KVM's preferred
style so that XSAVES related logic can use common macros that depend on
KVM's preferred style.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230815203653.519297-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the handling of GLOBAL_CTRL, GLOBAL_STATUS, and GLOBAL_OVF_CTRL,
a.k.a. GLOBAL_STATUS_RESET, from Intel PMU code to generic x86 PMU code.
AMD PerfMonV2 defines three registers that have the same semantics as
Intel's variants, just with different names and indices. Conveniently,
since KVM virtualizes GLOBAL_CTRL on Intel only for PMU v2 and above, and
AMD's version shows up in v2, KVM can use common code for the existence
check as well.
Signed-off-by: Like Xu <likexu@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 changes for 6.4:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Misc cleanups
|
|
Virtualize FLUSH_L1D so that the guest can use the performant L1D flush
if one of the many mitigations might require a flush in the guest, e.g.
Linux provides an option to flush the L1D when switching mms.
Passthrough MSR_IA32_FLUSH_CMD for write when it's supported in hardware
and exposed to the guest, i.e. always let the guest write it directly if
FLUSH_L1D is fully supported.
Forward writes to hardware in host context on the off chance that KVM
ends up emulating a WRMSR, or in the really unlikely scenario where
userspace wants to force a flush. Restrict these forwarded WRMSRs to
the known command out of an abundance of caution. Passing through the
MSR means the guest can throw any and all values at hardware, but doing
so in host context is arguably a bit more dangerous.
Link: https://lkml.kernel.org/r/CALMp9eTt3xzAEoQ038bJQ9LN0ZOXrSWsN7xnNUD%2B0SS%3DWwF7Pg%40mail.gmail.com
Link: https://lore.kernel.org/all/20230201132905.549148-2-eesposit@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322011440.2195485-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Guests like grsecurity that make heavy use of CR0.WP to implement kernel
level W^X will suffer from the implied VMEXITs.
With EPT there is no need to intercept a guest change of CR0.WP, so
simply make it a guest owned bit if we can do so.
This implies that a read of a guest's CR0.WP bit might need a VMREAD.
However, the only potentially affected user seems to be kvm_init_mmu()
which is a heavy operation to begin with. But also most callers already
cache the full value of CR0 anyway, so no additional VMREAD is needed.
The only exception is nested_vmx_load_cr3().
This change is VMX-specific, as SVM has no such fine grained control
register intercept control.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-7-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Tag to_vmx() and to_kvm_vmx() __always_inline as they both just reflect
the passed in pointer (the embedded struct is the first field in the
container), and drop the @vmx param from vmx_vcpu_enter_exit(), which
likely existed purely to make noinstr validation happy.
Amusingly, when the compiler decides to not inline the helpers, e.g. for
KASAN builds, to_vmx() and to_kvm_vmx() may end up pointing at the same
symbol, which generates very confusing objtool warnings. E.g. the use of
to_vmx() in a future patch led to objtool complaining about to_kvm_vmx(),
and only once all use of to_kvm_vmx() was commented out did to_vmx() pop
up in the obj tool report.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x160: call to to_kvm_vmx()
leaves .noinstr.text section
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an extra special noinstr-friendly helper to test+mark a "register"
available and use it when caching vmcs.EXIT_QUALIFICATION and
vmcs.VM_EXIT_INTR_INFO. Make the caching helpers __always_inline too so
that they can be used in noinstr functions.
A future fix will move VMX's handling of NMI exits into the noinstr
vmx_vcpu_enter_exit() so that the NMI is processed before any kind of
instrumentation can trigger a fault and thus IRET, i.e. so that KVM
doesn't invoke the NMI handler with NMIs enabled.
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
As a preparation to reusing the result of setup_vmcs_config() in
nested VMX MSR setup, add the CPU based VM execution controls which KVM
doesn't use but supports for nVMX to KVM_OPT_VMX_CPU_BASED_VM_EXEC_CONTROL
and filter them out in vmx_exec_control().
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-27-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As a preparation to reusing the result of setup_vmcs_config() in
nested VMX MSR setup, add the VMEXIT controls which KVM doesn't
use but supports for nVMX to KVM_OPT_VMX_VM_EXIT_CONTROLS and
filter them out in vmx_vmexit_ctrl().
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-26-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When VMX controls macros are used to set or clear a control bit, make
sure that this bit was checked in setup_vmcs_config() and thus is properly
reflected in vmcs_config.
Opportunistically drop pointless "< 0" check for adjust_vmx_controls()'s
return value.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-24-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When querying whether or not eVMCS is enabled on behalf of the guest,
treat eVMCS as enable if and only if Hyper-V is enabled/exposed to the
guest.
Note, flows that come from the host, e.g. KVM_SET_NESTED_STATE, must NOT
check for Hyper-V being enabled as KVM doesn't require guest CPUID to be
set before most ioctls().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-7-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that the PMU is refreshed when MSR_IA32_PERF_CAPABILITIES is written
by host userspace, zero out the number of LBR records for a vCPU during
PMU refresh if PMU_CAP_LBR_FMT is not set in PERF_CAPABILITIES instead of
handling the check at run-time.
guest_cpuid_has() is expensive due to the linear search of guest CPUID
entries, intel_pmu_lbr_is_enabled() is checked on every VM-Enter, _and_
simply enumerating the same "Model" as the host causes KVM to set the
number of LBR records to a non-zero value.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Turn vcpu_to_lbr_desc() and vcpu_to_lbr_records() into functions in order
to provide type safety, to document exactly what they return, and to
allow consuming the helpers in vmx.h. Move the definitions as necessary
(the macros "reference" to_vmx() before its definition).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
|
|
Add a helper to check of the guest PMU has PERF_GLOBAL_CTRL, which is
unintuitive _and_ diverges from Intel's architecturally defined behavior.
Even worse, KVM currently implements the check using two different (but
equivalent) checks, _and_ there has been at least one attempt to add a
_third_ flavor.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722224409.1336532-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On VMX, there are some balanced returns between the time the guest's
SPEC_CTRL value is written, and the vmenter.
Balanced returns (matched by a preceding call) are usually ok, but it's
at least theoretically possible an NMI with a deep call stack could
empty the RSB before one of the returns.
For maximum paranoia, don't allow *any* returns (balanced or otherwise)
between the SPEC_CTRL write and the vmenter.
[ bp: Fix 32-bit build. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
On eIBRS systems, the returns in the vmexit return path from
__vmx_vcpu_run() to vmx_vcpu_run() are exposed to RSB poisoning attacks.
Fix that by moving the post-vmexit spec_ctrl handling to immediately
after the vmexit.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Convert __vmx_vcpu_run()'s 'launched' argument to 'flags', in
preparation for doing SPEC_CTRL handling immediately after vmexit, which
will need another flag.
This is much easier than adding a fourth argument, because this code
supports both 32-bit and 64-bit, and the fourth argument on 32-bit would
have to be pushed on the stack.
Note that __vmx_vcpu_run_flags() is called outside of the noinstr
critical section because it will soon start calling potentially
traceable functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Use kvm_vcpu_map() to get/pin the backing for vmcs12's APIC-access page,
there's no reason it has to be restricted to 'struct page' backing. The
APIC-access page actually doesn't need to be backed by anything, which is
ironically why it got left behind by the series which introduced
kvm_vcpu_map()[1]; the plan was to shove a dummy pfn into vmcs02[2], but
that code never got merged.
Switching the APIC-access page to kvm_vcpu_map() doesn't preclude using a
magic pfn in the future, and will allow a future patch to drop
kvm_vcpu_gpa_to_page().
[1] https://lore.kernel.org/all/1547026933-31226-1-git-send-email-karahmed@amazon.de
[2] https://lore.kernel.org/lkml/1543845551-4403-1-git-send-email-karahmed@amazon.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename the fields in struct nested_vmx used to snapshot pre-VM-Enter
values to reflect that they can hold L2's values when restoring nested
state, e.g. if userspace restores MSRs before nested state. As crazy as
it seems, restoring MSRs before nested state actually works (because KVM
goes out if it's way to make it work), even though the initial MSR writes
will hit vmcs01 despite holding L2 values.
Add a related comment to vmx_enter_smm() to call out that using the
common VM-Exit and VM-Enter helpers to emulate SMI and RSM is wrong and
broken. The few MSRs that have snapshots _could_ be fixed by taking a
snapshot prior to the forced VM-Exit instead of at forced VM-Enter, but
that's just the tip of the iceberg as the rather long list of MSRs that
aren't snapshotted (hello, VM-Exit MSR load list) can't be handled this
way.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614215831.3762138-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For the same purpose, the leagcy intel_pmu_lbr_is_compatible() can be
renamed for reuse by more callers, and remove the comment about LBR
use case can be deleted by the way.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-17-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The guest PEBS will be disabled when some users try to perf KVM and
its user-space through the same PEBS facility OR when the host perf
doesn't schedule the guest PEBS counter in a one-to-one mapping manner
(neither of these are typical scenarios).
The PEBS records in the guest DS buffer are still accurate and the
above two restrictions will be checked before each vm-entry only if
guest PEBS is deemed to be enabled.
Suggested-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-15-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With IPI virtualization enabled, the processor emulates writes to
APIC registers that would send IPIs. The processor sets the bit
corresponding to the vector in target vCPU's PIR and may send a
notification (IPI) specified by NDST and NV fields in target vCPU's
Posted-Interrupt Descriptor (PID). It is similar to what IOMMU
engine does when dealing with posted interrupt from devices.
A PID-pointer table is used by the processor to locate the PID of a
vCPU with the vCPU's APIC ID. The table size depends on maximum APIC
ID assigned for current VM session from userspace. Allocating memory
for PID-pointer table is deferred to vCPU creation, because irqchip
mode and VM-scope maximum APIC ID is settled at that point. KVM can
skip PID-pointer table allocation if !irqchip_in_kernel().
Like VT-d PI, if a vCPU goes to blocked state, VMM needs to switch its
notification vector to wakeup vector. This can ensure that when an IPI
for blocked vCPUs arrives, VMM can get control and wake up blocked
vCPUs. And if a VCPU is preempted, its posted interrupt notification
is suppressed.
Note that IPI virtualization can only virualize physical-addressing,
flat mode, unicast IPIs. Sending other IPIs would still cause a
trap-like APIC-write VM-exit and need to be handled by VMM.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154510.11938-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check VMX features on tertiary execution control in VMCS config setup.
Sub-features in tertiary execution control to be enabled are adjusted
according to hardware capabilities although no sub-feature is enabled
in this patch.
EVMCSv1 doesn't support tertiary VM-execution control, so disable it
when EVMCSv1 is in use. And define the auxiliary functions for Tertiary
control field here, using the new BUILD_CONTROLS_SHADOW().
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419153400.11642-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Tertiary VM-Exec Control, different from previous control fields, is 64
bit. So extend BUILD_CONTROLS_SHADOW() by adding a 'bit' parameter, to
support both 32 bit and 64 bit fields' auxiliary functions building.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419153318.11595-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The enumeration of MD_CLEAR in CPUID(EAX=7,ECX=0).EDX{bit 10} is not an
accurate indicator on all CPUs of whether the VERW instruction will
overwrite fill buffers. FB_CLEAR enumeration in
IA32_ARCH_CAPABILITIES{bit 17} covers the case of CPUs that are not
vulnerable to MDS/TAA, indicating that microcode does overwrite fill
buffers.
Guests running in VMM environments may not be aware of all the
capabilities/vulnerabilities of the host CPU. Specifically, a guest may
apply MDS/TAA mitigations when a virtual CPU is enumerated as vulnerable
to MDS/TAA even when the physical CPU is not. On CPUs that enumerate
FB_CLEAR_CTRL the VMM may set FB_CLEAR_DIS to skip overwriting of fill
buffers by the VERW instruction. This is done by setting FB_CLEAR_DIS
during VMENTER and resetting on VMEXIT. For guests that enumerate
FB_CLEAR (explicitly asking for fill buffer clear capability) the VMM
will not use FB_CLEAR_DIS.
Irrespective of guest state, host overwrites CPU buffers before VMENTER
to protect itself from an MMIO capable guest, as part of mitigation for
MMIO Stale Data vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.
In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).
IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.
Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.
Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form. But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs. If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Undo a nested VMX fix as a step toward reverting the commit it fixed,
15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"),
as the underlying premise that "host CR3 in the vcpu thread can only be
changed when scheduling" is wrong.
This reverts commit a9f2705ec84449e3b8d70c804766f8e97e23080d.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220224191917.3508476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and
rename the list and all associated variables to clarify that it tracks
the set of vCPU that need to be poked on a posted interrupt to the wakeup
vector. The list is not used to track _all_ vCPUs that are blocking, and
the term "blocked" can be misleading as it may refer to a blocking
condition in the host or the guest, where as the PI wakeup case is
specifically for the vCPUs that are actively blocking from within the
guest.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Always intercepting IA32_XFD causes non-negligible overhead when this
register is updated frequently in the guest.
Disable r/w emulation after intercepting the first WRMSR(IA32_XFD)
with a non-zero value.
Disable WRMSR emulation implies that IA32_XFD becomes out-of-sync
with the software states in fpstate and the per-cpu xfd cache. This
leads to two additional changes accordingly:
- Call fpu_sync_guest_vmexit_xfd_state() after vm-exit to bring
software states back in-sync with the MSR, before handle_exit_irqoff()
is called.
- Always trap #NM once write interception is disabled for IA32_XFD.
The #NM exception is rare if the guest doesn't use dynamic
features. Otherwise, there is at most one exception per guest
task given a dynamic feature.
p.s. We have confirmed that SDM is being revised to say that
when setting IA32_XFD[18] the AMX register state is not guaranteed
to be preserved. This clarification avoids adding mess for a creative
guest which sets IA32_XFD[18]=1 before saving active AMX state to
its own storage.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-22-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This saves one unnecessary VM-exit in guest #NM handler, given that the
MSR is already restored with the guest value before the guest is resumed.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-15-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The host CR3 in the vcpu thread can only be changed when scheduling,
so commit 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()")
changed vmx.c to only save it in vmx_prepare_switch_to_guest().
However, it also has to be synced in vmx_sync_vmcs_host_state() when switching VMCS.
vmx_set_host_fs_gs() is called in both places, so rename it to
vmx_set_vmcs_host_state() and make it update HOST_CR3.
Fixes: 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211216021938.11752-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a flag to keep track of whether MSR bitmap for L2 needs to be
rebuilt due to changes in MSR bitmap for L1 or switching to a different
L2. This information will be used for Enlightened MSR Bitmap feature for
Hyper-V guests.
Note, setting msr_bitmap_changed to 'true' from set_current_vmptr() is
not really needed for Enlightened MSR Bitmap as the feature can only
be used in conjunction with Enlightened VMCS but let's keep tracking
information complete, it's cheap and in the future similar PV feature can
easily be implemented for KVM on KVM too.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211129094704.326635-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Document the meaning of the three combinations of regs_avail and
regs_dirty. Update regs_dirty just after writeback instead of
doing it later after vmexit. After vmexit, instead, we clear the
regs_avail bits corresponding to lazily-loaded registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
And thus another call to kvm_vcpu_map() can die.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-7-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Using kvm_vcpu_map() for reading from the guest is entirely gratuitous,
when all we do is a single memcpy and unmap it again. Fix it up to use
kvm_read_guest()... but in fact I couldn't bring myself to do that
without also making it use a gfn_to_hva_cache for both that *and* the
copy in the other direction.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
INVVPID, and INVEPT
handle_invept(), handle_invvpid(), handle_invpcid() read the same reg2
field in vmcs.VMX_INSTRUCTION_INFO to get the index of the GPR that
holds the invalidation type. Add a helper to retrieve reg2 from VMX
instruction info to consolidate and document the shift+mask magic.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109174426.2350547-2-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add builder macros to generate the MSR bitmap helpers to reduce the
amount of copy-paste code, especially with respect to all the magic
numbers needed to calc the correct bit location.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Always check vmcs01's MSR bitmap when merging L0 and L1 bitmaps for L2,
and always update the relevant bits in vmcs02. This fixes two distinct,
but intertwined bugs related to dynamic MSR bitmap modifications.
The first issue is that KVM fails to enable MSR interception in vmcs02
for the FS/GS base MSRs if L1 first runs L2 with interception disabled,
and later enables interception.
The second issue is that KVM fails to honor userspace MSR filtering when
preparing vmcs02.
Fix both issues simultaneous as fixing only one of the issues (doesn't
matter which) would create a mess that no one should have to bisect.
Fixing only the first bug would exacerbate the MSR filtering issue as
userspace would see inconsistent behavior depending on the whims of L1.
Fixing only the second bug (MSR filtering) effectively requires fixing
the first, as the nVMX code only knows how to transition vmcs02's
bitmap from 1->0.
Move the various accessor/mutators that are currently buried in vmx.c
into vmx.h so that they can be shared by the nested code.
Fixes: 1a155254ff93 ("KVM: x86: Introduce MSR filtering")
Fixes: d69129b4e46a ("KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible")
Cc: stable@vger.kernel.org
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To better self explain the meaning of this field and match the
PT_CAP_num_address_ranges constatn.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20210827070249.924633-4-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If L1 had invalid state on VM entry (can happen on SMM transactions
when we enter from real mode, straight to nested guest),
then after we load 'host' state from VMCS12, the state has to become
valid again, but since we load the segment registers with
__vmx_set_segment we weren't always updating emulation_required.
Update emulation_required explicitly at end of load_vmcs12_host_state.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210913140954.165665-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove vcpu_vmx.nr_active_uret_msrs and its associated comment, which are
both defunct now that KVM keeps the list constant and instead explicitly
tracks which entries need to be loaded into hardware.
No functional change intended.
Fixes: ee9d22e08d13 ("KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210908002401.1947049-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that nested VMX pulls KVM's desired VMCS controls from vmcs01 instead
of re-calculating on the fly, bury the helpers that do the calcluations
in vmx.c.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the secondary execution controls cache now that it's effectively
dead code; it is only read immediately after it is written.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When preparing controls for vmcs02, grab KVM's desired controls from
vmcs01's shadow state instead of recalculating the controls from scratch,
or in the secondary execution controls, instead of using the dedicated
cache. Calculating secondary exec controls is eye-poppingly expensive
due to the guest CPUID checks, hence the dedicated cache, but the other
calculations aren't exactly free either.
Explicitly clear several bits (x2APIC, DESC exiting, and load EFER on
exit) as appropriate as they may be set in vmcs01, whereas the previous
implementation relied on dynamic bits being cleared in the calculator.
Intentionally propagate VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL from
vmcs01 to vmcs02. Whether or not PERF_GLOBAL_CTRL is loaded depends on
whether or not perf itself is active, so unless perf stops between the
exit from L1 and entry to L2, vmcs01 will hold the desired value. This
is purely an optimization as atomic_switch_perf_msrs() will set/clear
the control as needed at VM-Enter, i.e. it avoids two extra VMWRITEs in
the case where perf is active (versus starting with the bits clear in
vmcs02, which was the previous behavior).
Cc: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
