summaryrefslogtreecommitdiff
path: root/arch/x86/mm
AgeCommit message (Collapse)Author
2017-11-22x86/mm/kasan: Don't use vmemmap_populate() to initialize shadowAndrey Ryabinin
[ Note, this commit is a cherry-picked version of: d17a1d97dc20: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow") ... for easier x86 entry code testing and back-porting. ] The KASAN shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for KASAN, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-16x86/mm: Limit mmap() of /dev/mem to valid physical addressesCraig Bergstrom
One thing /dev/mem access APIs should verify is that there's no way that excessively large pfn's can leak into the high bits of the page table entry. In particular, if people can use "very large physical page addresses" through /dev/mem to set the bits past bit 58 - SOFTW4 and permission key bits and NX bit, that could *really* confuse the kernel. We had an earlier attempt: ce56a86e2ade ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") ... which turned out to be too restrictive (breaking mem=... bootups for example) and had to be reverted in: 90edaac62729 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"") This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem) limits the pfns so that it at least fits in the actual pteval_t architecturally: - Make sure mmap_mem() actually validates that the offset fits in phys_addr_t ( This may be indirectly true due to some other check, but it's not entirely obvious. ) - Change valid_mmap_phys_addr_range() to just use phys_addr_valid() on the top byte ( Top byte is sufficient, because mmap_mem() has already checked that it cannot wrap. ) - Add a few comments about what the valid_phys_addr_range() vs. valid_mmap_phys_addr_range() difference is. Signed-off-by: Craig Bergstrom <craigb@google.com> [ Fixed the checks and added comments. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-16x86/mm: Prevent non-MAP_FIXED mapping across DEFAULT_MAP_WINDOW borderKirill A. Shutemov
In case of 5-level paging, the kernel does not place any mapping above 47-bit, unless userspace explicitly asks for it. Userspace can request an allocation from the full address space by specifying the mmap address hint above 47-bit. Nicholas noticed that the current implementation violates this interface: If user space requests a mapping at the end of the 47-bit address space with a length which causes the mapping to cross the 47-bit border (DEFAULT_MAP_WINDOW), then the vma is partially in the address space below and above. Sanity check the mmap address hint so that start and end of the resulting vma are on the same side of the 47-bit border. If that's not the case fall back to the code path which ignores the address hint and allocate from the regular address space below 47-bit. To make the checks consistent, mask out the address hints lower bits (either PAGE_MASK or huge_page_mask()) instead of using ALIGN() which can push them up to the next boundary. [ tglx: Moved the address check to a function and massaged comment and changelog ] Reported-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171115143607.81541-1-kirill.shutemov@linux.intel.com
2017-11-13Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - a refactoring of the early virt init code by merging 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init', which allows simplifications and also the addition of a new ->guest_late_init() callback. (Juergen Gross) - timer_setup() conversion of the UV code (Kees Cook)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/virt/xen: Use guest_late_init to detect Xen PVH guest x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA x86/virt: Add enum for hypervisors to replace x86_hyper x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init' x86/platform/UV: Convert timers to use timer_setup()
2017-11-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Ingo Molnar: "Note that in this cycle most of the x86 topics interacted at a level that caused them to be merged into tip:x86/asm - but this should be a temporary phenomenon, hopefully we'll back to the usual patterns in the next merge window. The main changes in this cycle were: Hardware enablement: - Add support for the Intel UMIP (User Mode Instruction Prevention) CPU feature. This is a security feature that disables certain instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri) [ Note that this is disabled by default for now, there are some smaller enhancements in the pipeline that I'll follow up with in the next 1-2 days, which allows this to be enabled by default.] - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU feature, on top of SME (Secure Memory Encryption) support that was added in v4.14. (Tom Lendacky, Brijesh Singh) - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES, VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela) Other changes: - A big series of entry code simplifications and enhancements (Andy Lutomirski) - Make the ORC unwinder default on x86 and various objtool enhancements. (Josh Poimboeuf) - 5-level paging enhancements (Kirill A. Shutemov) - Micro-optimize the entry code a bit (Borislav Petkov) - Improve the handling of interdependent CPU features in the early FPU init code (Andi Kleen) - Build system enhancements (Changbin Du, Masahiro Yamada) - ... plus misc enhancements, fixes and cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits) x86/build: Make the boot image generation less verbose selftests/x86: Add tests for the STR and SLDT instructions selftests/x86: Add tests for User-Mode Instruction Prevention x86/traps: Fix up general protection faults caused by UMIP x86/umip: Enable User-Mode Instruction Prevention at runtime x86/umip: Force a page fault when unable to copy emulated result to user x86/umip: Add emulation code for UMIP instructions x86/cpufeature: Add User-Mode Instruction Prevention definitions x86/insn-eval: Add support to resolve 16-bit address encodings x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode x86/insn-eval: Add wrapper function for 32 and 64-bit addresses x86/insn-eval: Add support to resolve 32-bit address encodings x86/insn-eval: Compute linear address in several utility functions resource: Fix resource_size.cocci warnings X86/KVM: Clear encryption attribute when SEV is active X86/KVM: Decrypt shared per-cpu variables when SEV is active percpu: Introduce DEFINE_PER_CPU_DECRYPTED x86: Add support for changing memory encryption attribute in early boot x86/io: Unroll string I/O when SEV is active x86/boot: Add early boot support when running with SEV active ...
2017-11-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main changes in this cycle are: - Another attempt at enabling cross-release lockdep dependency tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time with better performance and fewer false positives. (Byungchul Park) - Introduce lockdep_assert_irqs_enabled()/disabled() and convert open-coded equivalents to lockdep variants. (Frederic Weisbecker) - Add down_read_killable() and use it in the VFS's iterate_dir() method. (Kirill Tkhai) - Convert remaining uses of ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle driven. (Mark Rutland, Paul E. McKenney) - Get rid of lockless_dereference(), by strengthening Alpha atomics, strengthening READ_ONCE() with smp_read_barrier_depends() and thus being able to convert users of lockless_dereference() to READ_ONCE(). (Will Deacon) - Various micro-optimizations: - better PV qspinlocks (Waiman Long), - better x86 barriers (Michael S. Tsirkin) - better x86 refcounts (Kees Cook) - ... plus other fixes and enhancements. (Borislav Petkov, Juergen Gross, Miguel Bernal Marin)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE rcu: Use lockdep to assert IRQs are disabled/enabled netpoll: Use lockdep to assert IRQs are disabled/enabled timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled irq_work: Use lockdep to assert IRQs are disabled/enabled irq/timings: Use lockdep to assert IRQs are disabled/enabled perf/core: Use lockdep to assert IRQs are disabled/enabled x86: Use lockdep to assert IRQs are disabled/enabled smp/core: Use lockdep to assert IRQs are disabled/enabled timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled timers/nohz: Use lockdep to assert IRQs are disabled/enabled workqueue: Use lockdep to assert IRQs are disabled/enabled irq/softirqs: Use lockdep to assert IRQs are disabled/enabled locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled() locking/pvqspinlock: Implement hybrid PV queued/unfair locks locking/rwlocks: Fix comments x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion() workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes ...
2017-11-10x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' ↵Juergen Gross
and 'struct x86_init' Instead of x86_hyper being either NULL on bare metal or a pointer to a struct hypervisor_x86 in case of the kernel running as a guest merge the struct into x86_platform and x86_init. This will remove the need for wrappers making it hard to find out what is being called. With dummy functions added for all callbacks testing for a NULL function pointer can be removed, too. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: devel@linuxdriverproject.org Cc: haiyangz@microsoft.com Cc: kvm@vger.kernel.org Cc: kys@microsoft.com Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: rusty@rustcorp.com.au Cc: sthemmin@microsoft.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20171109132739.23465-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10Merge branch 'linus' into x86/asm, to resolve conflictIngo Molnar
Conflicts: arch/x86/mm/mem_encrypt.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10Merge branch 'x86/mm' into x86/asm, to merge branchesIngo Molnar
Most of x86/mm is already in x86/asm, so merge the rest too. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-08x86/mm: Unbreak modules that rely on external PAGE_KERNEL availabilityJiri Kosina
Commit 7744ccdbc16f0 ("x86/mm: Add Secure Memory Encryption (SME) support") as a side-effect made PAGE_KERNEL all of a sudden unavailable to modules which can't make use of EXPORT_SYMBOL_GPL() symbols. This is because once SME is enabled, sme_me_mask (which is introduced as EXPORT_SYMBOL_GPL) makes its way to PAGE_KERNEL through _PAGE_ENC, causing imminent build failure for all the modules which make use of all the EXPORT-SYMBOL()-exported API (such as vmap(), __vmalloc(), remap_pfn_range(), ...). Exporting (as EXPORT_SYMBOL()) interfaces (and having done so for ages) that take pgprot_t argument, while making it impossible to -- all of a sudden -- pass PAGE_KERNEL to it, feels rather incosistent. Restore the original behavior and make it possible to pass PAGE_KERNEL to all its EXPORT_SYMBOL() consumers. [ This is all so not wonderful. We shouldn't need that "sme_me_mask" access at all in all those places that really don't care about that level of detail, and just want _PAGE_KERNEL or whatever. We have some similar issues with _PAGE_CACHE_WP and _PAGE_NOCACHE, both of which hide a "cachemode2protval()" call, and which also ends up using another EXPORT_SYMBOL(), but at least that only triggers for the much more rare cases. Maybe we could move these dynamic page table bits to be generated much deeper down in the VM layer, instead of hiding them in the macros that everybody uses. So this all would merit some cleanup. But not today. - Linus ] Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Despised-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-08Merge branch 'x86/mpx' into x86/asm, to pick up dependent commitsIngo Molnar
The UMIP series is based on top of changes already queued up in the x86/mpx branch, so merge it. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07x86: Add support for changing memory encryption attribute in early bootBrijesh Singh
Some KVM-specific custom MSRs share the guest physical address with the hypervisor in early boot. When SEV is active, the shared physical address must be mapped with memory encryption attribute cleared so that both hypervisor and guest can access the data. Add APIs to change the memory encryption attribute in early boot code. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: kvm@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171020143059.3291-15-brijesh.singh@amd.com
2017-11-07x86/io: Unroll string I/O when SEV is activeTom Lendacky
Secure Encrypted Virtualization (SEV) does not support string I/O, so unroll the string I/O operation into a loop operating on one element at a time. [ tglx: Gave the static key a real name instead of the obscure __sev ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: kvm@vger.kernel.org Cc: David Laight <David.Laight@ACULAB.COM> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171020143059.3291-14-brijesh.singh@amd.com
2017-11-07x86/boot: Add early boot support when running with SEV activeTom Lendacky
Early in the boot process, add checks to determine if the kernel is running with Secure Encrypted Virtualization (SEV) active. Checking for SEV requires checking that the kernel is running under a hypervisor (CPUID 0x00000001, bit 31), that the SEV feature is available (CPUID 0x8000001f, bit 1) and then checking a non-interceptable SEV MSR (0xc0010131, bit 0). This check is required so that during early compressed kernel booting the pagetables (both the boot pagetables and KASLR pagetables (if enabled) are updated to include the encryption mask so that when the kernel is decompressed into encrypted memory, it can boot properly. After the kernel is decompressed and continues booting the same logic is used to check if SEV is active and set a flag indicating so. This allows to distinguish between SME and SEV, each of which have unique differences in how certain things are handled: e.g. DMA (always bounce buffered with SEV) or EFI tables (always access decrypted with SME). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: kvm@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171020143059.3291-13-brijesh.singh@amd.com
2017-11-07x86/mm: Add DMA support for SEV memory encryptionTom Lendacky
DMA access to encrypted memory cannot be performed when SEV is active. In order for DMA to properly work when SEV is active, the SWIOTLB bounce buffers must be used. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de>C Tested-by: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171020143059.3291-12-brijesh.singh@amd.com
2017-11-07x86/mm, resource: Use PAGE_KERNEL protection for ioremap of memory pagesTom Lendacky
In order for memory pages to be properly mapped when SEV is active, it's necessary to use the PAGE_KERNEL protection attribute as the base protection. This ensures that memory mapping of, e.g. ACPI tables, receives the proper mapping attributes. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: kvm@vger.kernel.org Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171020143059.3291-11-brijesh.singh@amd.com
2017-11-07x86/mm: Include SEV for encryption memory attribute changesTom Lendacky
The current code checks only for sme_active() when determining whether to perform the encryption attribute change. Include sev_active() in this check so that memory attribute changes can occur under SME and SEV. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Laura Abbott <labbott@redhat.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: kvm@vger.kernel.org Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171020143059.3291-7-brijesh.singh@amd.com
2017-11-07x86/mm: Use encrypted access of boot related data with SEVTom Lendacky
When Secure Encrypted Virtualization (SEV) is active, boot data (such as EFI related data, setup data) is encrypted and needs to be accessed as such when mapped. Update the architecture override in early_memremap to keep the encryption attribute when mapping this data. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Laura Abbott <labbott@redhat.com> Cc: kvm@vger.kernel.org Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171020143059.3291-6-brijesh.singh@amd.com
2017-11-07x86/mm: Add Secure Encrypted Virtualization (SEV) supportTom Lendacky
Provide support for Secure Encrypted Virtualization (SEV). This initial support defines a flag that is used by the kernel to determine if it is running with SEV active. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20171020143059.3291-3-brijesh.singh@amd.com
2017-11-07x86/mm: Remove unnecessary TLB flush for SME in-place encryptionTom Lendacky
A TLB flush is not required when doing in-place encryption or decryption since the area's pagetable attributes are not being altered. To avoid confusion between what the routine is doing and what is documented in the AMD APM, delete the local_flush_tlb() call. Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171101165426.1388.24866.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06Merge branch 'x86/mm' into x86/asm, to pick up pending changesIngo Molnar
Concentrate x86 MM and asm related changes into a single super-topic, in preparation for larger changes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes: - A PCID related revert that fixes power management and performance regressions. - The module loader robustization and sanity check commit is rather fresh, but it looked like a good idea to apply because of the hidden data corruption problem such invalid modules could cause" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/module: Detect and skip invalid relocations Revert "x86/mm: Stop calling leave_mm() in idle code"
2017-11-04Revert "x86/mm: Stop calling leave_mm() in idle code"Andy Lutomirski
This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01x86/mpx, x86/insn: Relocate insn util functions to a new insn-eval fileRicardo Neri
Other kernel submodules can benefit from using the utility functions defined in mpx.c to obtain the addresses and values of operands contained in the general purpose registers. An instance of this is the emulation code used for instructions protected by the Intel User-Mode Instruction Prevention feature. Thus, these functions are relocated to a new insn-eval.c file. The reason to not relocate these utilities into insn.c is that the latter solely analyses instructions given by a struct insn without any knowledge of the meaning of the values of instruction operands. This new utility insn- eval.c aims to be used to resolve userspace linear addresses based on the contents of the instruction operands as well as the contents of pt_regs structure. These utilities come with a separate header. This is to avoid taking insn.c out of sync from the instructions decoders under tools/obj and tools/perf. This also avoids adding cumbersome #ifdef's for the #include'd files required to decode instructions in a kernel context. Functions are simply relocated. There are not functional or indentation changes. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Garnier <thgarnie@google.com> Link: https://lkml.kernel.org/r/1509135945-13762-10-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mpx: Do not use SIB.base if its value is 101b and ModRM.mod = 0Ricardo Neri
Section 2.2.1.2 of the Intel 64 and IA-32 Architectures Software Developer's Manual volume 2A states that if a SIB byte is used and SIB.base is 101b and ModRM.mod is zero, then the base part of the base part of the effective address computation is null. To signal this situation, a -EDOM error is returned to indicate callers to ignore the base value present in the register operand. In this scenario, a 32-bit displacement follows the SIB byte. Displacement is obtained when the instruction decoder parses the operands. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Adan Hawthorn <adanhawthorn@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Nathan Howard <liverlint@gmail.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1509135945-13762-9-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mpx: Do not use SIB.index if its value is 100b and ModRM.mod is not 11bRicardo Neri
Section 2.2.1.2 of the Intel 64 and IA-32 Architectures Software Developer's Manual volume 2A states that when ModRM.mod !=11b and ModRM.rm = 100b indexed register-indirect addressing is used. In other words, a SIB byte follows the ModRM byte. In the specific case of SIB.index = 100b, the scale*index portion of the computation of the effective address is null. To signal callers of this particular situation, get_reg_offset() can return -EDOM (-EINVAL continues to indicate that an error when decoding the SIB byte). An example of this situation can be the following instruction: 8b 4c 23 80 mov -0x80(%rbx,%riz,1),%rcx ModRM: 0x4c [mod:1b][reg:1b][rm:100b] SIB: 0x23 [scale:0b][index:100b][base:11b] Displacement: 0x80 (1-byte, as per ModRM.mod = 1b) The %riz 'register' indicates a null index. In long mode, a REX prefix may be used. When a REX prefix is present, REX.X adds a fourth bit to the register selection of SIB.index. This gives the ability to refer to all the 16 general purpose registers. When REX.X is 1b and SIB.index is 100b, the index is indicated in %r12. In our example, this would look like: 42 8b 4c 23 80 mov -0x80(%rbx,%r12,1),%rcx REX: 0x42 [W:0b][R:0b][X:1b][B:0b] ModRM: 0x4c [mod:1b][reg:1b][rm:100b] SIB: 0x23 [scale:0b][.X: 1b, index:100b][.B:0b, base:11b] Displacement: 0x80 (1-byte, as per ModRM.mod = 1b) %r12 is a valid register to use in the scale*index part of the effective address computation. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Adan Hawthorn <adanhawthorn@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Nathan Howard <liverlint@gmail.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1509135945-13762-8-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mpx: Use signed variables to compute effective addressesRicardo Neri
Even though memory addresses are unsigned, the operands used to compute the effective address do have a sign. This is true for ModRM.rm, SIB.base, SIB.index as well as the displacement bytes. Thus, signed variables shall be used when computing the effective address from these operands. Once the signed effective address has been computed, it is casted to an unsigned long to determine the linear address. Variables are renamed to better reflect the type of address being computed. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Adan Hawthorn <adanhawthorn@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Nathan Howard <liverlint@gmail.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1509135945-13762-7-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mpx: Simplify handling of errors when computing linear addressesRicardo Neri
When errors occur in the computation of the linear address, -1L is returned. Rather than having a separate return path for errors, the variable used to return the computed linear address can be initialized with the error value. Hence, only one return path is needed. This makes the function easier to read. While here, ensure that the error value is -1L, a 64-bit value, rather than -1, a 32-bit value. Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Adan Hawthorn <adanhawthorn@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Nathan Howard <liverlint@gmail.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1509135945-13762-6-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mm: Relocate page fault error codes to traps.hRicardo Neri
Up to this point, only fault.c used the definitions of the page fault error codes. Thus, it made sense to keep them within such file. Other portions of code might be interested in those definitions too. For instance, the User- Mode Instruction Prevention emulation code will use such definitions to emulate a page fault when it is unable to successfully copy the results of the emulated instructions to user space. While relocating the error code enumeration, the prefix X86_ is used to make it consistent with the rest of the definitions in traps.h. Of course, code using the enumeration had to be updated as well. No functional changes were performed. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/1509135945-13762-2-git-send-email-ricardo.neri-calderon@linux.intel.com
2017-11-01x86/mm: fix use-after-free of vma during userfaultfd faultVlastimil Babka
Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in __do_page_fault() with the following reproducer: mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0) mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0) r0 = userfaultfd(0x0) ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0}) ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0}) r1 = gettid() syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0) tkill(r1, 0x7) The vma should be pinned by mmap_sem, but handle_userfault() might (in a return to userspace scenario) release it and then acquire again, so when we return to __do_page_fault() (with other result than VM_FAULT_RETRY), the vma might be gone. Specifically, per Andrea the scenario is "A return to userland to repeat the page fault later with a VM_FAULT_NOPAGE retval (potentially after handling any pending signal during the return to userland). The return to userland is identified whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in vmf->flags" However, since commit a3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after that point, which can thus become use-after-free. Fix this by moving the read before calling handle_mm_fault(). Reported-by: syzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-30x86/mm/64: Rename the register_page_bootmem_memmap() 'size' parameter to ↵Baoquan He
'nr_pages' register_page_bootmem_memmap()'s 3rd 'size' parameter is named in a somewhat misleading fashion - rename it to 'nr_pages' which makes the units of it much clearer. Meanwhile rename the existing local variable 'nr_pages' to 'nr_pmd_pages', a more expressive name, to avoid conflict with new function parameter 'nr_pages'. (Also clean up the unnecessary parentheses in which get_order() is called.) Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/1509154238-23250-1-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-30Merge tag 'v4.14-rc7' into x86/mm, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-27Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"Ingo Molnar
This reverts commit ce56a86e2ade45d052b3228cdfebe913a1ae7381. There's unanticipated interaction with some boot parameters like 'mem=', which now cause the new checks via valid_mmap_phys_addr_range() to be too restrictive, crashing a Qemu bootup in fact, as reported by Fengguang Wu. So while the motivation of the change is still entirely valid, we need a few more rounds of testing to get it right - it's way too late after -rc6, so revert it for now. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Craig Bergstrom <craigb@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: dsafonov@virtuozzo.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: oleg@redhat.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24Merge tag 'v4.14-rc6' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20x86/kasan: Use the same shadow offset for 4- and 5-level pagingAndrey Ryabinin
We are going to support boot-time switching between 4- and 5-level paging. For KASAN it means we cannot have different KASAN_SHADOW_OFFSET for different paging modes: the constant is passed to gcc to generate code and cannot be changed at runtime. This patch changes KASAN code to use 0xdffffc0000000000 as shadow offset for both 4- and 5-level paging. For 5-level paging it means that shadow memory region is not aligned to PGD boundary anymore and we have to handle unaligned parts of the region properly. In addition, we have to exclude paravirt code from KASAN instrumentation as we now use set_pgd() before KASAN is fully ready. [kirill.shutemov@linux.intel.com: clenaup, changelog message] Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170929140821.37654-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20x86/mm: Limit mmap() of /dev/mem to valid physical addressesCraig Bergstrom
Currently, it is possible to mmap() any offset from /dev/mem. If a program mmaps() /dev/mem offsets outside of the addressable limits of a system, the page table can be corrupted by setting reserved bits. For example if you mmap() offset 0x0001000000000000 of /dev/mem on an x86_64 system with a 48-bit bus, the page fault handler will be called with error_code set to RSVD. The kernel then crashes with a page table corruption error. This change prevents this page table corruption on x86 by refusing to mmap offsets higher than the highest valid address in the system. Signed-off-by: Craig Bergstrom <craigb@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: dsafonov@virtuozzo.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/20171019192856.39672-1-craigb@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mmAndy Lutomirski
Borislav thinks that we don't need this knob in a released kernel. Get rid of it. Requested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode") Link: http://lkml.kernel.org/r/1fa72431924e81e86c164ff7881bf9240d1f1a6c.1508000261.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode"Andy Lutomirski
Due to timezones, commit: b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode") was an outdated patch that well tested and fixed the bug but didn't address Borislav's review comments. Tidy it up: - The name "tlb_use_lazy_mode()" was highly confusing. Change it to "tlb_defer_switch_to_init_mm()", which describes what it actually means. - Move the static_branch crap into a helper. - Improve comments. Actually removing the debugfs option is in the next patch. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode") Link: http://lkml.kernel.org/r/154ef95428d4592596b6e98b0af1d2747d6cfbf8.1508000261.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18x86/mm/64: Remove the last VM_BUG_ON() from the TLB codeAndy Lutomirski
Let's avoid hard-to-diagnose crashes in the future. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f423bbc97864089fbdeb813f1ea126c6eaed844a.1508000261.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14x86/mm: Flush more aggressively in lazy TLB modeAndy Lutomirski
Since commit: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") x86's lazy TLB mode has been all the way lazy: when running a kernel thread (including the idle thread), the kernel keeps using the last user mm's page tables without attempting to maintain user TLB coherence at all. From a pure semantic perspective, this is fine -- kernel threads won't attempt to access user pages, so having stale TLB entries doesn't matter. Unfortunately, I forgot about a subtlety. By skipping TLB flushes, we also allow any paging-structure caches that may exist on the CPU to become incoherent. This means that we can have a paging-structure cache entry that references a freed page table, and the CPU is within its rights to do a speculative page walk starting at the freed page table. I can imagine this causing two different problems: - A speculative page walk starting from a bogus page table could read IO addresses. I haven't seen any reports of this causing problems. - A speculative page walk that involves a bogus page table can install garbage in the TLB. Such garbage would always be at a user VA, but some AMD CPUs have logic that triggers a machine check when it notices these bogus entries. I've seen a couple reports of this. Boris further explains the failure mode: > It is actually more of an optimization which assumes that paging-structure > entries are in WB DRAM: > > "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables > performance optimization that assumes PML4, PDP, PDE, and PTE entries > are in cacheable WB-DRAM; memory type checks may be bypassed, and > addresses outside of WB-DRAM may result in undefined behavior or NB > protocol errors. 1=Disables performance optimization and allows PML4, > PDP, PDE and PTE entries to be in any memory type. Operating systems > that maintain page tables in memory types other than WB- DRAM must set > TlbCacheDis to insure proper operation." > > The MCE generated is an NB protocol error to signal that > > "Link: A specific coherent-only packet from a CPU was issued to an > IO link. This may be caused by software which addresses page table > structures in a memory type other than cacheable WB-DRAM without > properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for > example, when page table structure addresses are above top of memory. In > such cases, the NB will generate an MCE if it sees a mismatch between > the memory operation generated by the core and the link type." > > I'm assuming coherent-only packets don't go out on IO links, thus the > error. To fix this, reinstate TLB coherence in lazy mode. With this patch applied, we do it in one of two ways: - If we have PCID, we simply switch back to init_mm's page tables when we enter a kernel thread -- this seems to be quite cheap except for the cost of serializing the CPU. - If we don't have PCID, then we set a flag and switch to init_mm the first time we would otherwise need to flush the TLB. The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed to override the default mode for benchmarking. In theory, we could optimize this better by only flushing the TLB in lazy CPUs when a page table is freed. Doing that would require auditing the mm code to make sure that all page table freeing goes through tlb_remove_page() as well as reworking some data structures to implement the improved flush logic. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biggers <ebiggers@google.com> Cc: Johannes Hirte <johannes.hirte@datenkhaos.de> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-11x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.cTom Lendacky
Some routines in mem_encrypt.c are called very early in the boot process, e.g. sme_enable(). When CONFIG_KCOV=y is defined the resulting code added to sme_enable() (and others) for KCOV instrumentation results in a kernel crash. Disable the KCOV instrumentation for mem_encrypt.c by adding KCOV_INSTRUMENT_mem_encrypt.o := n to arch/x86/mm/Makefile. In order to avoid other possible early boot issues, model mem_encrypt.c after head64.c in regards to tools. In addition to disabling KCOV as stated above and a previous patch that disables branch profiling, also remove the "-pg" CFLAG if CONFIG_FUNCTION_TRACER is enabled and set KASAN_SANITIZE to "n", each of which are done on a file basis. Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171010194504.18887.38053.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10Merge branch 'locking/urgent' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "This contains the following fixes and improvements: - Avoid dereferencing an unprotected VMA pointer in the fault signal generation code - Fix inline asm call constraints for GCC 4.4 - Use existing register variable to retrieve the stack pointer instead of forcing the compiler to create another indirect access which results in excessive extra 'mov %rsp, %<dst>' instructions - Disable branch profiling for the memory encryption code to prevent an early boot crash - Fix a sparse warning caused by casting the __user annotation in __get_user_asm_u64() away - Fix an off by one error in the loop termination of the error patch in the x86 sysfs init code - Add missing CPU IDs to various Intel specific drivers to enable the functionality on recent hardware - More (init) constification in the numachip code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Use register variable to get stack pointer value x86/mm: Disable branch profiling in mem_encrypt.c x86/asm: Fix inline asm call constraints for GCC 4.4 perf/x86/intel/uncore: Correct num_boxes for IIO and IRP perf/x86/intel/rapl: Add missing CPU IDs perf/x86/msr: Add missing CPU IDs perf/x86/intel/cstate: Add missing CPU IDs x86: Don't cast away the __user in __get_user_asm_u64() x86/sysfs: Fix off-by-one error in loop termination x86/mm: Fix fault error path using unsafe vma pointer x86/numachip: Add const and __initconst to numachip2_clockevent
2017-09-29x86/asm: Use register variable to get stack pointer valueAndrey Ryabinin
Currently we use current_stack_pointer() function to get the value of the stack pointer register. Since commit: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") ... we have a stack register variable declared. It can be used instead of current_stack_pointer() function which allows to optimize away some excessive "mov %rsp, %<dst>" instructions: -mov %rsp,%rdx -sub %rdx,%rax -cmp $0x3fff,%rax -ja ffffffff810722fd <ist_begin_non_atomic+0x2d> +sub %rsp,%rax +cmp $0x3fff,%rax +ja ffffffff810722fa <ist_begin_non_atomic+0x2a> Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer and use it instead of the removed function. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929141537.29167-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29x86/mm: Disable branch profiling in mem_encrypt.cTom Lendacky
Some routines in mem_encrypt.c are called very early in the boot process, e.g. sme_encrypt_kernel(). When CONFIG_TRACE_BRANCH_PROFILING=y is defined the resulting branch profiling associated with the check to see if SME is active results in a kernel crash. Disable branch profiling for mem_encrypt.c by defining DISABLE_BRANCH_PROFILING before including any header files. Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929162419.6016.53390.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-28locking/refcounts, x86/asm: Use unique .text section for refcount exceptionsKees Cook
Using .text.unlikely for refcount exceptions isn't safe because gcc may move entire functions into .text.unlikely (e.g. in6_dev_dev()), which would cause any uses of a protected refcount_t function to stay inline with the function, triggering the protection unconditionally: .section .text.unlikely,"ax",@progbits .type in6_dev_get, @function in6_dev_getx: .LFB4673: .loc 2 4128 0 .cfi_startproc ... lock; incl 480(%rbx) js 111f .pushsection .text.unlikely 111: lea 480(%rbx), %rcx 112: .byte 0x0f, 0xff .popsection 113: This creates a unique .text..refcount section and adds an additional test to the exception handler to WARN in the case of having none of OF, SF, nor ZF set so we can see things like this more easily in the future. The double dot for the section name keeps it out of the TEXT_MAIN macro namespace, to avoid collisions and so it can be put at the end with text.unlikely to keep the cold code together. See commit: cb87481ee89db ("kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured") ... which matches C names: [a-zA-Z0-9_] but not ".". Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Elena <elena.reshetova@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch <linux-arch@vger.kernel.org> Fixes: 7a46ec0e2f48 ("locking/refcounts, x86/asm: Implement fast refcount overflow protection") Link: http://lkml.kernel.org/r/1504382986-49301-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-27 06:41:14 +0000