summaryrefslogtreecommitdiff
path: root/arch/x86/xen/pmu.c
AgeCommit message (Collapse)Author
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-01Merge tag 'v4.19-rc6' into for-4.20/blockJens Axboe
Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27x86/xen: Add Hygon Dhyana support to XenPu Wen
To make Xen work on the Hygon platform, reuse AMD's Xen support code path for Hygon Dhyana CPU. There are six core performance events counters per thread, so there are six MSRs for these counters. Also there are four legacy PMC MSRs, they are aliases of the counters. In this version, use the legacy and safe version of MSR access. Tested successfully with VPMU enabled in Xen on Hygon platform by testing with perf. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: jgross@suse.com Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/311bf41f08f24550aa6c5da3f1e03a68d3b89dac.1537533369.git.puwen@hygon.cn
2018-09-26xen: don't include <xen/xen.h> from <asm/io.h> and <asm/dma-mapping.h>Christoph Hellwig
Nothing Xen specific in these headers, which get included from a lot of code in the kernel. So prune the includes and move them to the Xen-specific files that actually use them instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-19xen/x86/vpmu: Zero struct pt_regs before calling into sample handling codeBoris Ostrovsky
Otherwise we may leak kernel stack for events that sample user registers. Reported-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-24xen: Make VPMU init message look less scaryJuergen Gross
The default for the Xen hypervisor is to not enable VPMU in order to avoid security issues. In this case the Linux kernel will issue the message "Could not initialize VPMU for cpu 0, error -95" which looks more like an error than a normal state. Change the message to something less scary in case the hypervisor returns EOPNOTSUPP or ENOSYS when trying to activate VPMU. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen/PMU: Log VPMU initialization error at lower levelBoris Ostrovsky
This will match how PMU errors are reported at check_hw_exists()'s msr_fail label, which is reached when VPMU initialzation fails. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-02-17perf/x86: Move perf_event.h to its new homeBorislav Petkov
Now that all functionality has been moved to arch/x86/events/, move the perf_event.h header and adjust include paths. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1455098123-11740-18-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-20xen/PMU: PMU emulation codeBoris Ostrovsky
Add PMU emulation code that runs when we are processing a PMU interrupt. This code will allow us not to trap to hypervisor on each MSR/LVTPC access (of which there may be quite a few in the handler). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Intercept PMU-related MSR and APIC accessesBoris Ostrovsky
Provide interfaces for recognizing accesses to PMU-related MSRs and LVTPC APIC and process these accesses in Xen PMU code. (The interrupt handler performs XENPMU_flush right away in the beginning since no PMU emulation is available. It will be added with a later patch). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Describe vendor-specific PMU registersBoris Ostrovsky
AMD and Intel PMU register initialization and helpers that determine whether a register belongs to PMU. This and some of subsequent PMU emulation code is somewhat similar to Xen's PMU implementation. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Initialization code for Xen PMUBoris Ostrovsky
Map shared data structure that will hold CPU registers, VPMU context, V/PCPU IDs of the CPU interrupted by PMU interrupt. Hypervisor fills this information in its handler and passes it to the guest for further processing. Set up PMU VIRQ. Now that perf infrastructure will assume that PMU is available on a PV guest we need to be careful and make sure that accesses via RDPMC instruction don't cause fatal traps by the hypervisor. Provide a nop RDPMC handler. For the same reason avoid issuing a warning on a write to APIC's LVTPC. Both of these will be made functional in later patches. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>