| Age | Commit message (Collapse) | Author |
|---|
|
__vmx_vcpu_run_flags() returns "unsigned int" and uses only 2 bits of it
so using "unsigned long" is very much pointless. Furthermore,
__vmx_vcpu_run() and vmx_spec_ctrl_restore_host() take an "unsigned int",
i.e. actually relying on an "unsigned long" value won't work.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/Y3e7UW0WNV2AZmsZ@p183
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Access @flags using 32-bit operands when saving and testing @flags for
VMX_RUN_VMRESUME, as using 8-bit operands is unnecessarily fragile due
to relying on VMX_RUN_VMRESUME being in bits 0-7. The behavior of
treating @flags a single byte is a holdover from when the param was
"bool launched", i.e. is not deliberate.
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20221119003747.2615229-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Account the temp/scratch allocation used to decrypt unaligned debug
accesses to SEV guest memory, the allocation is very much tied to the
target VM.
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Anish Ghulati <aghulati@google.com>
Link: https://lore.kernel.org/r/20230113220923.2834699-1-aghulati@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Even in commit 4bdec12aa8d6 ("KVM: SVM: Detect X2APIC virtualization
(x2AVIC) support"), where avic_hardware_setup() was first introduced,
its only pass-in parameter "struct kvm_x86_ops *ops" is not used at all.
Clean it up a bit to avoid compiler ranting from LLVM toolchain.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221109115952.92816-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return value from svm_nmi_blocked() directly instead of taking
this in another redundant variable.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/202211282003389362484@zte.com.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When building a list of filter events, it can sometimes be a challenge
to fit all the events needed to adequately restrict the guest into the
limited space available in the pmu event filter. This stems from the
fact that the pmu event filter requires each event (i.e. event select +
unit mask) be listed, when the intention might be to restrict the
event select all together, regardless of it's unit mask. Instead of
increasing the number of filter events in the pmu event filter, add a
new encoding that is able to do a more generalized match on the unit mask.
Introduce masked events as another encoding the pmu event filter
understands. Masked events has the fields: mask, match, and exclude.
When filtering based on these events, the mask is applied to the guest's
unit mask to see if it matches the match value (i.e. umask & mask ==
match). The exclude bit can then be used to exclude events from that
match. E.g. for a given event select, if it's easier to say which unit
mask values shouldn't be filtered, a masked event can be set up to match
all possible unit mask values, then another masked event can be set up to
match the unit mask values that shouldn't be filtered.
Userspace can query to see if this feature exists by looking for the
capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS.
This feature is enabled by setting the flags field in the pmu event
filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS.
Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY().
It is an error to have a bit set outside the valid bits for a masked
event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in
such cases, including the high bits of the event select (35:32) if
called on Intel.
With these updates the filter matching code has been updated to match on
a common event. Masked events were flexible enough to handle both event
types, so they were used as the common event. This changes how guest
events get filtered because regardless of the type of event used in the
uAPI, they will be converted to masked events. Because of this there
could be a slight performance hit because instead of matching the filter
event with a lookup on event select + unit mask, it does a lookup on event
select then walks the unit masks to find the match. This shouldn't be a
big problem because I would expect the set of common event selects to be
small, and if they aren't the set can likely be reduced by using masked
events to generalize the unit mask. Using one type of event when
filtering guest events allows for a common code path to be used.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor check_pmu_event_filter() in preparation for masked events.
No functional changes intended
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-4-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If it's not possible for an event in the pmu event filter to match a
pmu event being programmed by the guest, it's pointless to have it in
the list. Opt for a shorter list by removing those events.
Because this is established uAPI the pmu event filter can't outright
rejected these events as garbage and return an error. Instead, play
nice and remove them from the list.
Also, opportunistically rewrite the comment when the filter is set to
clarify that it guards against *all* TOCTOU attacks on the verified
data.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-3-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When checking if a pmu event the guest is attempting to program should
be filtered, only consider the event select + unit mask in that
decision. Use an architecture specific mask to mask out all other bits,
including bits 35:32 on Intel. Those bits are not part of the event
select and should not be considered in that decision.
Fixes: 66bb8a065f5a ("KVM: x86: PMU Event Filter")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-2-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/670882aa04dbdd171b46d3b20ffab87158454616.1673689135.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the new kvm_flush_remote_tlbs_gfn() helper to cleanup the call sites
of range-based flushing for given page, which makes the code clear.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/593ee1a876ece0e819191c0b23f56b940d6686db.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The spte pointing to the children SP is dropped, so the whole gfn range
covered by the children SP should be flushed. Although, Hyper-V may
treat a 1-page flush the same if the address points to a huge page, it
still would be better to use the correct size of huge page.
Fixes: c3134ce240eed ("KVM: Replace old tlb flush function with new one to flush a specified range.")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/5f297c566f7d7ff2ea6da3c66d050f69ce1b8ede.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When a spte is dropped, the start gfn of tlb flushing should be the gfn
of spte not the base gfn of SP which contains the spte. Also introduce a
helper function to do range-based flushing when a spte is dropped, which
would help prevent future buggy use of
kvm_flush_remote_tlbs_with_address() in such case.
Fixes: c3134ce240eed ("KVM: Replace old tlb flush function with new one to flush a specified range.")
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/72ac2169a261976f00c1703e88cda676dfb960f5.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
tdp_mmu_map_handle_target_level()
Since the children SP is zapped, the gfn range of tlb flushing should be
the range covered by children SP not parent SP. Replace sp->gfn which is
the base gfn of parent SP with iter->gfn and use the correct size of gfn
range for children SP to reduce tlb flushing range.
Fixes: bb95dfb9e2df ("KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/528ab9c784a486e9ce05f61462ad9260796a8732.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When the spte of hupe page is dropped in kvm_set_pte_rmapp(), the whole
gfn range covered by the spte should be flushed. However,
rmap_walk_init_level() doesn't align down the gfn for new level like tdp
iterator does, then the gfn used in kvm_set_pte_rmapp() is not the base
gfn of huge page. And the size of gfn range is wrong too for huge page.
Use the base gfn of huge page and the size of huge page for flushing
tlbs for huge page. Also introduce a helper function to flush the given
page (huge or not) of guest memory, which would help prevent future
buggy use of kvm_flush_remote_tlbs_with_address() in such case.
Fixes: c3134ce240eed ("KVM: Replace old tlb flush function with new one to flush a specified range.")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/0ce24d7078fa5f1f8d64b0c59826c50f32f8065e.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rounding down the GFN to a huge page size is a common pattern throughout
KVM, so move round_gfn_for_level() helper in tdp_iter.c to
mmu_internal.h for common usage. Also rename it as gfn_round_for_level()
to use gfn_* prefix and clean up the other call sites.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/415c64782f27444898db650e21cf28eeb6441dfa.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There is no function named kvm_mmu_ensure_valid_pgd().
Fix the comment and remove the pair of braces to conform to Linux kernel
coding style.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221128214709.224710-1-wei.liu@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Although there is no harm, but there is no point to clear write
flooding for direct SP.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Link: https://lore.kernel.org/r/20230105100310.6700-1-jiangshanlai@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
SPTE_TDP_AD_ENABLED_MASK, SPTE_TDP_AD_DISABLED_MASK and
SPTE_TDP_AD_WRPROT_ONLY_MASK are actual value, not mask.
Remove "MASK" from their names.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Link: https://lore.kernel.org/r/20230105100204.6521-1-jiangshanlai@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable SVM and more importantly force GIF=1 when halting a CPU or
rebooting the machine. Similar to VMX, SVM allows software to block
INITs via CLGI, and thus can be problematic for a crash/reboot. The
window for failure is smaller with SVM as INIT is only blocked while
GIF=0, i.e. between CLGI and STGI, but the window does exist.
Fixes: fba4f472b33a ("x86/reboot: Turn off KVM when halting a CPU")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable SVM on all CPUs via NMI shootdown during an emergency reboot.
Like VMX, SVM can block INIT, e.g. if the emergency reboot is triggered
between CLGI and STGI, and thus can prevent bringing up other CPUs via
INIT-SIPI-SIPI.
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Set GIF=1 prior to disabling SVM to ensure that INIT is recognized if the
kernel is disabling SVM in an emergency, e.g. if the kernel is about to
jump into a crash kernel or may reboot without doing a full CPU RESET.
If GIF is left cleared, the new kernel (or firmware) will be unabled to
awaken APs. Eat faults on STGI (due to EFER.SVME=0) as it's possible
that SVM could be disabled via NMI shootdown between reading EFER.SVME
and executing STGI.
Link: https://lore.kernel.org/all/cbcb6f35-e5d7-c1c9-4db9-fe5cc4de579a@amd.com
Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable virtualization in crash_nmi_callback() and rework the
emergency_vmx_disable_all() path to do an NMI shootdown if and only if a
shootdown has not already occurred. NMI crash shootdown fundamentally
can't support multiple invocations as responding CPUs are deliberately
put into halt state without unblocking NMIs. But, the emergency reboot
path doesn't have any work of its own, it simply cares about disabling
virtualization, i.e. so long as a shootdown occurred, emergency reboot
doesn't care who initiated the shootdown, or when.
If "crash_kexec_post_notifiers" is specified on the kernel command line,
panic() will invoke crash_smp_send_stop() and result in a second call to
nmi_shootdown_cpus() during native_machine_emergency_restart().
Invoke the callback _before_ disabling virtualization, as the current
VMCS needs to be cleared before doing VMXOFF. Note, this results in a
subtle change in ordering between disabling virtualization and stopping
Intel PT on the responding CPUs. While VMX and Intel PT do interact,
VMXOFF and writes to MSR_IA32_RTIT_CTL do not induce faults between one
another, which is all that matters when panicking.
Harden nmi_shootdown_cpus() against multiple invocations to try and
capture any such kernel bugs via a WARN instead of hanging the system
during a crash/dump, e.g. prior to the recent hardening of
register_nmi_handler(), re-registering the NMI handler would trigger a
double list_add() and hang the system if CONFIG_BUG_ON_DATA_CORRUPTION=y.
list_add double add: new=ffffffff82220800, prev=ffffffff8221cfe8, next=ffffffff82220800.
WARNING: CPU: 2 PID: 1319 at lib/list_debug.c:29 __list_add_valid+0x67/0x70
Call Trace:
__register_nmi_handler+0xcf/0x130
nmi_shootdown_cpus+0x39/0x90
native_machine_emergency_restart+0x1c9/0x1d0
panic+0x237/0x29b
Extract the disabling logic to a common helper to deduplicate code, and
to prepare for doing the shootdown in the emergency reboot path if SVM
is supported.
Note, prior to commit ed72736183c4 ("x86/reboot: Force all cpus to exit
VMX root if VMX is supported"), nmi_shootdown_cpus() was subtly protected
against a second invocation by a cpu_vmx_enabled() check as the kdump
handler would disable VMX if it ran first.
Fixes: ed72736183c4 ("x86/reboot: Force all cpus to exit VMX root if VMX is supported")
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/all/20220427224924.592546-2-gpiccoli@igalia.com
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The scaling information in subleaf 1 should match the values set by KVM in
the 'vcpu_info' sub-structure 'time_info' (a.k.a. pvclock_vcpu_time_info)
which is shared with the guest, but is not directly available to the VMM.
The offset values are not set since a TSC offset is already applied.
The TSC frequency should also be set in sub-leaf 2.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230106103600.528-3-pdurrant@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
A subsequent patch will need to acquire the CPUID leaf range for emulated
Xen so explicitly pass the signature of the hypervisor we're interested in
to the new function. Also introduce a new kvm_hypervisor_cpuid structure
so we can neatly store both the base and limit leaf indices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230106103600.528-2-pdurrant@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop cpu_dirty_logging_count in favor of nr_memslots_dirty_logging.
Both fields count the number of memslots that have dirty-logging enabled,
with the only difference being that cpu_dirty_logging_count is only
incremented when using PML. So while nr_memslots_dirty_logging is not a
direct replacement for cpu_dirty_logging_count, it can be combined with
enable_pml to get the same information.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20230105214303.2919415-1-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Zero-length arrays are deprecated[1]. Replace struct kvm_nested_state's
"data" union 0-length arrays with flexible arrays. (How are the
sizes of these arrays verified?) Detected with GCC 13, using
-fstrict-flex-arrays=3:
arch/x86/kvm/svm/nested.c: In function 'svm_get_nested_state':
arch/x86/kvm/svm/nested.c:1536:17: error: array subscript 0 is outside array bounds of 'struct kvm_svm_nested_state_data[0]' [-Werror=array-bounds=]
1536 | &user_kvm_nested_state->data.svm[0];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/uapi/linux/kvm.h:15,
from include/linux/kvm_host.h:40,
from arch/x86/kvm/svm/nested.c:18:
arch/x86/include/uapi/asm/kvm.h:511:50: note: while referencing 'svm'
511 | struct kvm_svm_nested_state_data svm[0];
| ^~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230105190548.never.323-kees@kernel.org
Link: https://lore.kernel.org/r/20230118195905.gonna.693-kees@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fast zero-length REP MOVSB, fast short REP STOSB, and fast short REP
{CMPSB,SCASB} are inherent features of the processor that cannot be
hidden by the hypervisor. When these features are present on the host,
enumerate them in KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220901211811.2883855-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM_GET_SUPPORTED_CPUID should reflect these host CPUID bits. The bits
are already cached in word 12. Give the bits X86_FEATURE names, so
that they can be easily referenced. Hide these bits from
/proc/cpuinfo, since the host kernel makes no use of them at present.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220901211811.2883855-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
when the vCPU was migrated, if its timer is expired, KVM _should_ fire
the timer ASAP, zeroing the deadline here will cause the timer to
immediately fire on the destination
Cc: Sean Christopherson <seanjc@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20230106040625.8404-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Intercept reads to invalid (non-existent) and write-only x2APIC registers
when configuring VMX's MSR bitmaps for x2APIC+APICv. When APICv is fully
enabled, Intel hardware doesn't validate the registers on RDMSR and
instead blindly retrieves data from the vAPIC page, i.e. it's software's
responsibility to intercept reads to non-existent and write-only MSRs.
Fixes: 8d14695f9542 ("x86, apicv: add virtual x2apic support")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't clear the "read" bits for x2APIC registers above SELF_IPI (APIC regs
0x400 - 0xff0, MSRs 0x840 - 0x8ff). KVM doesn't emulate registers in that
space (there are a smattering of AMD-only extensions) and so should
intercept reads in order to inject #GP. When APICv is fully enabled,
Intel hardware doesn't validate the registers on RDMSR and instead blindly
retrieves data from the vAPIC page, i.e. it's software's responsibility to
intercept reads to non-existent MSRs.
Fixes: 8d14695f9542 ("x86, apicv: add virtual x2apic support")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20230107011025.565472-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the generation of the readable APIC regs bitmask to a standalone
helper so that VMX can use the mask for its MSR interception bitmaps.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mark APIC_DFR as being invalid/non-existent in x2APIC mode instead of
handling it as a one-off check in kvm_x2apic_msr_read(). This will allow
reusing "valid_reg_mask" to generate VMX's interception bitmaps for
x2APIC. Handling DFR in the common read path may also fix the Hyper-V
PV MSR interface, if that can coexist with x2APIC.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Reject attempts to set bits 63:32 for 32-bit x2APIC registers, i.e. all
x2APIC registers except ICR. Per Intel's SDM:
Non-zero writes (by WRMSR instruction) to reserved bits to these
registers will raise a general protection fault exception
Opportunistically fix a typo in a nearby comment.
Reported-by: Marc Orr <marcorr@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Inject a #GP if the guest attempts to set reserved bits in the x2APIC-only
Self-IPI register. Bits 7:0 hold the vector, all other bits are reserved.
Reported-by: Marc Orr <marcorr@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return value from apic_get_tmcct() directly instead of taking
this in another redundant variable.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/202211231704457807160@zte.com.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The first half or so patches fix semi-urgent, real-world relevant APICv
and AVIC bugs.
The second half fixes a variety of AVIC and optimized APIC map bugs
where KVM doesn't play nice with various edge cases that are
architecturally legal(ish), but are unlikely to occur in most real world
scenarios
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
|
|
The event configuration for mbm_local_bytes can be changed by the
user by writing to the configuration file
/sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config.
The event configuration settings are domain specific and will affect all
the CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
For example, to change the mbm_local_bytes_config to count all the non-temporal
writes on domain 0, the bits 2 and 3 needs to be set which is 1100b (in hex
0xc).
Run the command:
$echo 0=0xc > /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
To change the mbm_local_bytes to count only reads to local NUMA domain 1,
the bit 0 needs to be set which 1b (in hex 0x1). Run the command:
$echo 1=0x1 > /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-13-babu.moger@amd.com
|
|
The event configuration for mbm_total_bytes can be changed by the user by
writing to the file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
The event configuration settings are domain specific and affect all the
CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
For example:
To change the mbm_total_bytes to count only reads on domain 0, the bits
0, 1, 4 and 5 needs to be set, which is 110011b (in hex 0x33).
Run the command:
$echo 0=0x33 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
To change the mbm_total_bytes to count all the slow memory reads on domain 1,
the bits 4 and 5 needs to be set which is 110000b (in hex 0x30).
Run the command:
$echo 1=0x30 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-12-babu.moger@amd.com
|
|
The event configuration can be viewed by the user by reading the configuration
file /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config. The event
configuration settings are domain specific and will affect all the CPUs in the
domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
By default, the mbm_local_bytes_config is set to 0x15 to count all the local
event types.
For example:
$cat /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
0=0x15;1=0x15;2=0x15;3=0x15
In this case, the event mbm_local_bytes is configured with 0x15 on
domains 0 to 3.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-11-babu.moger@amd.com
|
|
The event configuration can be viewed by the user by reading the
configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config. The
event configuration settings are domain specific and will affect all the CPUs in
the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
By default, the mbm_total_bytes_config is set to 0x7f to count all the
event types.
For example:
$cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
0=0x7f;1=0x7f;2=0x7f;3=0x7f
In this case, the event mbm_total_bytes is configured with 0x7f on
domains 0 to 3.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-10-babu.moger@amd.com
|
|
Add a new field in struct mon_evt to support Bandwidth Monitoring Event
Configuration (BMEC) and also update the "mon_features" display.
The resctrl file "mon_features" will display the supported events
and files that can be used to configure those events if monitor
configuration is supported.
Before the change:
$ cat /sys/fs/resctrl/info/L3_MON/mon_features
llc_occupancy
mbm_total_bytes
mbm_local_bytes
After the change when BMEC is supported:
$ cat /sys/fs/resctrl/info/L3_MON/mon_features
llc_occupancy
mbm_total_bytes
mbm_total_bytes_config
mbm_local_bytes
mbm_local_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-9-babu.moger@amd.com
|
|
In an upcoming change, rdt_get_mon_l3_config() needs to call rdt_cpu_has() to
query the monitor related features. It cannot be called right now because
rdt_cpu_has() has the __init attribute but rdt_get_mon_l3_config() doesn't.
Add the __init attribute to rdt_get_mon_l3_config() that is only called by
get_rdt_mon_resources() that already has the __init attribute. Also make
rdt_cpu_has() available to by rdt_get_mon_l3_config() via the internal header
file.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-8-babu.moger@amd.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The QoS slow memory configuration details are available via
CPUID_Fn80000020_EDX_x02. Detect the available details and
initialize the rest to defaults.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-7-babu.moger@amd.com
|
|
Add the command line options to enable or disable the new resctrl features:
smba: Slow Memory Bandwidth Allocation
bmec: Bandwidth Monitor Event Configuration.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-6-babu.moger@amd.com
|
|
Newer AMD processors support the new feature Bandwidth Monitoring Event
Configuration (BMEC).
The feature support is identified via CPUID Fn8000_0020_EBX_x0[3]: EVT_CFG -
Bandwidth Monitoring Event Configuration (BMEC)
The bandwidth monitoring events mbm_total_bytes and mbm_local_bytes are set to
count all the total and local reads/writes, respectively. With the introduction
of slow memory, the two counters are not enough to count all the different types
of memory events. Therefore, BMEC provides the option to configure
mbm_total_bytes and mbm_local_bytes to count the specific type of events.
Each BMEC event has a configuration MSR which contains one field for each
bandwidth type that can be used to configure the bandwidth event to track any
combination of supported bandwidth types. The event will count requests from
every bandwidth type bit that is set in the corresponding configuration
register.
Following are the types of events supported:
==== ========================================================
Bits Description
==== ========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ========================================================
By default, the mbm_total_bytes configuration is set to 0x7F to count
all the event types and the mbm_local_bytes configuration is set to 0x15 to
count all the local memory events.
Feature description is available in the specification, "AMD64 Technology
Platform Quality of Service Extensions, Revision: 1.03 Publication" at
https://bugzilla.kernel.org/attachment.cgi?id=301365
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-5-babu.moger@amd.com
|
|
Add a new resource type RDT_RESOURCE_SMBA to handle the QoS enforcement
policies on the external slow memory.
Mostly initialization of the essentials. Setting fflags to RFTYPE_RES_MB
configures the SMBA resource to have the same resctrl files as the
existing MBA resource. The SMBA resource has identical properties to
the existing MBA resource. These properties will be enumerated in an
upcoming change and exposed via resctrl because of this flag.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-4-babu.moger@amd.com
|
|
Add the new AMD feature X86_FEATURE_SMBA. With it, the QOS enforcement policies
can be applied to external slow memory connected to the host. QOS enforcement is
accomplished by assigning a Class Of Service (COS) to a processor and specifying
allocations or limits for that COS for each resource to be allocated.
This feature is identified by the CPUID function 0x8000_0020_EBX_x0[2]:
L3SBE - L3 external slow memory bandwidth enforcement.
CXL.memory is the only supported "slow" memory device. With SMBA, the hardware
enables bandwidth allocation on the slow memory devices. If there are multiple
slow memory devices in the system, then the throttling logic groups all the slow
sources together and applies the limit on them as a whole.
The presence of the SMBA feature (with CXL.memory) is independent of whether
slow memory device is actually present in the system. If there is no slow memory
in the system, then setting a SMBA limit will have no impact on the performance
of the system.
Presence of CXL memory can be identified by the numactl command:
$numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
node 0 size: 63678 MB node 0 free: 59542 MB
node 1 cpus:
node 1 size: 16122 MB
node 1 free: 15627 MB
node distances:
node 0 1
0: 10 50
1: 50 10
CPU list for CXL memory will be empty. The cpu-cxl node distance is greater than
cpu-to-cpu distances. Node 1 has the CXL memory in this case. CXL memory can
also be identified using ACPI SRAT table and memory maps.
Feature description is available in the specification, "AMD64 Technology
Platform Quality of Service Extensions, Revision: 1.03 Publication # 56375
Revision: 1.03 Issue Date: February 2022" at
https://bugzilla.kernel.org/attachment.cgi?id=301365
See also https://www.amd.com/en/support/tech-docs/amd64-technology-platform-quality-service-extensions
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-3-babu.moger@amd.com
|
