| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR
* tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/msr: Add Sapphire Rapids CPU support
|
|
This is a fix for the fix (yeah, /facepalm).
The correct mask to use is not the negation of the MXCSR_MASK but the
actual mask which contains the supported bits in the MXCSR register.
Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com
|
|
SMI_COUNT MSR is supported on Sapphire Rapids CPU.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com
|
|
This Kconfig option was added initially so that memory encryption is
enabled by default on machines which support it.
However, devices which have DMA masks that are less than the bit
position of the encryption bit, aka C-bit, require the use of an IOMMU
or the use of SWIOTLB.
If the IOMMU is disabled or in passthrough mode, the kernel would switch
to SWIOTLB bounce-buffering for those transfers.
In order to avoid that,
2cc13bb4f59f ("iommu: Disable passthrough mode when SME is active")
disables the default IOMMU passthrough mode so that devices for which the
default 256K DMA is insufficient, can use the IOMMU instead.
However 2, there are cases where the IOMMU is disabled in the BIOS, etc.
(think the usual hardware folk "oops, I dropped the ball there" cases) or a
driver doesn't properly use the DMA APIs or a device has a firmware or
hardware bug, e.g.:
ea68573d408f ("drm/amdgpu: Fail to load on RAVEN if SME is active")
However 3, in the above GPU use case, there are APIs like Vulkan and
some OpenGL/OpenCL extensions which are under the assumption that
user-allocated memory can be passed in to the kernel driver and both the
GPU and CPU can do coherent and concurrent access to the same memory.
That cannot work with SWIOTLB bounce buffers, of course.
So, in order for those devices to function, drop the "default y" for the
SME by default active option so that users who want to have SME enabled,
will need to either enable it in their config or use "mem_encrypt=on" on
the kernel command line.
[ tlendacky: Generalize commit message. ]
Fixes: 7744ccdbc16f ("x86/mm: Add Secure Memory Encryption (SME) support")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
out due to historical reasons and 64-bit kernels reject them
- A fix to clear X86_FEATURE_SMAP when support for is not
config-enabled
- Three fixes correcting misspelled Kconfig symbols used in code
- Two resctrl object cleanup fixes
- Yet another attempt at fixing the neverending saga of botched x86
timers, this time because some incredibly smart hardware decides to
turn off the HPET timer in a low power state - who cares if the OS is
relying on it...
- Check the full return value range of an SEV VMGEXIT call to determine
whether it returned an error
* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Restore the masking out of reserved MXCSR bits
x86/Kconfig: Correct reference to MWINCHIP3D
x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
x86/entry: Correct reference to intended CONFIG_64_BIT
x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
x86/hpet: Use another crystalball to evaluate HPET usability
x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- fix two minor issues in the Xen privcmd driver plus a cleanup patch
for that driver
- fix multiple issues related to running as PVH guest and some related
earlyprintk fixes for other Xen guest types
- fix an issue introduced in 5.15 the Xen balloon driver
* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix cancelled balloon action
xen/x86: adjust data placement
x86/PVH: adjust function/data placement
xen/x86: hook up xen_banner() also for PVH
xen/x86: generalize preferred console model from PV to PVH Dom0
xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
xen/x86: allow "earlyprintk=xen" to work for PV Dom0
xen/x86: make "earlyprintk=xen" work better for PVH Dom0
xen/x86: allow PVH Dom0 without XEN_PV=y
xen/x86: prevent PVH type from getting clobbered
xen/privcmd: drop "pages" parameter from xen_remap_pfn()
xen/privcmd: fix error handling in mmap-resource processing
xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
|
|
Ser Olmy reported a boot failure:
init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
in libc-2.33.so[b7bed000+156000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 0 PID: 1 Comm: init Tainted: G W 5.14.9 #1
Hardware name: Hewlett-Packard HP PC/HP Board, BIOS JD.00.06 12/06/2001
Call Trace:
dump_stack_lvl
dump_stack
panic
do_exit.cold
do_group_exit
get_signal
arch_do_signal_or_restart
? force_sig_info_to_task
? force_sig
exit_to_user_mode_prepare
syscall_exit_to_user_mode
do_int80_syscall_32
entry_INT80_32
on an old 32-bit Intel CPU:
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
microcode : 0x3
Ser bisected the problem to the commit in Fixes.
tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.
Further debugging confirmed his suggestion:
fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540
so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.
Fixes: 6f9866a166cd ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <ser.olmy@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Replace uuid.h with types.h in a header (Andy Shevchenko)
- Avoid sleeping in atomic context in PCI driver (Long Li)
- Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)
* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Avoid erroneously sending IPI to 'self'
hyper-v: Replace uuid.h with types.h
PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
|
|
Compile-testing drivers that require access to a firmware layer
fails when that firmware symbol is unavailable. This happened
twice this week:
- My proposed to change to rework the QCOM_SCM firmware symbol
broke on ppc64 and others.
- The cs_dsp firmware patch added device specific firmware loader
into drivers/firmware, which broke on the same set of
architectures.
We should probably do the same thing for other subsystems as well,
but fix this one first as this is a dependency for other patches
getting merged.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit in Fixes intended to exclude the Winchip series and referred to
CONFIG_WINCHIP3D, but the config symbol is called CONFIG_MWINCHIP3D.
Hence, scripts/checkkconfigsymbols.py warns:
WINCHIP3D
Referencing files: arch/x86/Kconfig
Correct the reference to the intended config symbol.
Fixes: 69b8d3fcabdc ("x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-4-lukas.bulwahn@gmail.com
|
|
The refactoring in the commit in Fixes introduced an ifdef
CONFIG_OLPC_XO1_5_SCI, however the config symbol is actually called
"CONFIG_OLPC_XO15_SCI".
Fortunately, ./scripts/checkkconfigsymbols.py warns:
OLPC_XO1_5_SCI
Referencing files: arch/x86/platform/olpc/olpc.c
Correct this ifdef condition to the intended config symbol.
Fixes: ec9964b48033 ("Platform: OLPC: Move EC-specific functionality out from x86")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-3-lukas.bulwahn@gmail.com
|
|
Commit
3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
added a warning if AC is set when in the kernel.
Commit
662a0221893a3d ("x86/entry: Fix AC assertion")
changed the warning to only fire if the CPU supports SMAP.
However, the warning can still trigger on a machine that supports SMAP
but where it's disabled in the kernel config and when running the
syscall_nt selftest, for example:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode
CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:irqentry_enter_from_user_mode
...
Call Trace:
? irqentry_enter
? exc_general_protection
? asm_exc_general_protection
? asm_exc_general_protectio
IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but
even this would not be enough in case SMAP is disabled at boot time with
the "nosmap" parameter.
To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when
!CONFIG_X86_SMAP.
Found using entry-fuzz + satrandconfig.
[ bp: Massage commit message. ]
Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211003223423.8666-1-vegard.nossum@oracle.com
|
|
Commit in Fixes adds a condition with IS_ENABLED(CONFIG_64_BIT),
but the intended config item is called CONFIG_64BIT, as defined in
arch/x86/Kconfig.
Fortunately, scripts/checkkconfigsymbols.py warns:
64_BIT
Referencing files: arch/x86/include/asm/entry-common.h
Correct the reference to the intended config symbol.
Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-2-lukas.bulwahn@gmail.com
|
|
Commit in Fixes separated the architecture specific and filesystem parts
of the resctrl domain structures.
This left the error paths in domain_add_cpu() kfree()ing the memory with
the wrong type.
This will cause a problem if someone adds a new member to struct
rdt_hw_domain meaning d_resctrl is no longer the first member.
Fixes: 792e0f6f789b ("x86/resctrl: Split struct rdt_domain")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20210917165924.28254-1-james.morse@arm.com
|
|
domain_add_cpu() is called whenever a CPU is brought online. The
earlier call to domain_setup_ctrlval() allocates the control value
arrays.
If domain_setup_mon_state() fails, the control value arrays are not
freed.
Add the missing kfree() calls.
Fixes: 1bd2a63b4f0de ("x86/intel_rdt/mba_sc: Add initialization support")
Fixes: edf6fa1c4a951 ("x86/intel_rdt/cqm: Add RMID (Resource monitoring ID) management")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210917165958.28313-1-james.morse@arm.com
|
|
__send_ipi_mask_ex() uses an optimization: when the target CPU mask is
equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid
converting the specified cpumask to VP_SET. This case was overlooked when
'exclude_self' parameter was added. As the result, a spurious IPI to
'self' can be send.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: dfb5c1e12c28 ("x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211006125016.941616-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Both xen_pvh and xen_start_flags get written just once early during
init. Using the respective annotation then allows the open-coded placing
in .data to go away.
Additionally the former, like the latter, wants exporting, or else
xen_pvh_domain() can't be used from modules.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8155ed26-5a1d-c06f-42d8-596d26e75849@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Two of the variables can live in .init.data, allowing the open-coded
placing in .data to go away. Another "variable" is used to communicate a
size value only to very early assembly code, which hence can be both
const and live in .init.*. Additionally two functions were lacking
__init annotations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/3b0bb22e-43f4-e459-c5cb-169f996b5669@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This was effectively lost while dropping PVHv1 code. Move the function
and arrange for it to be called the same way as done in PV mode. Clearly
this then needs re-introducing the XENFEAT_mmu_pt_update_preserve_ad
check that was recently removed, as that's a PV-only feature.
Since the string pointed at by pv_info.name describes the mode, drop
"paravirtualized" from the log message while moving the code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/de03054d-a20d-2114-bb86-eec28e17b3b8@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Without announcing hvc0 as preferred it won't get used as long as tty0
gets registered earlier. This is particularly problematic with there not
being any screen output for PVH Dom0 when the screen is in graphics
mode, as the necessary information doesn't get conveyed yet from the
hypervisor.
Follow PV's model, but be conservative and do this for Dom0 only for
now.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/582328b6-c86c-37f3-d802-5539b7a86736@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With preferred consoles "tty" and "hvc" announced as preferred,
registering "xenboot" early won't result in use of the console: It also
needs to be registered as preferred. Generalize this from being DomU-
only so far.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d4a34540-a476-df2c-bca6-732d0d58c5f0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0
to a new XEN_PV_DOM0. (I'm not convinced all are really / should really
be PV-specific, but for starters I've tried to be conservative.)
For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so
without x2APIC support enabled in the kernel things aren't going to work
very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT
as of now.) Note that this then requires PVH Dom0 to be 64-bit, as
X86_X2APIC depends on X86_64.
In the course of this xen_running_on_version_or_later() needs to be
available more broadly. Move it from a PV-specific to a generic file,
considering that what it does isn't really PV-specific at all anyway.
Note that xen/interface/version.h cannot be included on its own; in
enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h
first to resolve the apparently sole missing type (xen_ulong_t).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/983bb72f-53df-b6af-14bd-5e088bd06a08@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Like xen_start_flags, xen_domain_type gets set before .bss gets cleared.
Hence this variable also needs to be prevented from getting put in .bss,
which is possible because XEN_NATIVE is an enumerator evaluating to
zero. Any use prior to init_hvm_pv_info() setting the variable again
would lead to wrong decisions; one such case is xenboot_console_setup()
when called as a result of "earlyprintk=xen".
Use __ro_after_init as more applicable than either __section(".data") or
__read_mostly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d301677b-6f22-5ae6-bd36-458e1f323d0b@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The function doesn't use it and all of its callers say in a comment that
their respective arguments are to be non-NULL only in auto-translated
mode. Since xen_remap_domain_mfn_array() isn't supposed to be used by
non-PV, drop the parameter there as well. It was bogusly passed as non-
NULL (PRIV_VMA_LOCKED) by its only caller anyway. For
xen_remap_domain_gfn_range(), otoh, it's not clear at all why this
wouldn't want / might not need to gain auto-translated support down the
road, so the parameter is retained there despite now remaining unused
(and the only caller passing NULL); correct a respective comment as
well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/036ad8a2-46f9-ac3d-6219-bdc93ab9e10b@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The recent change to make objtool aware of more symbol relocation types
(commit 24ff65257375: "objtool: Teach get_alt_entry() about more
relocation types") also added another check, and resulted in this
objtool warning when building kvm on x86:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
The reason seems to be that kvm_fastop_exception() is marked as a global
symbol, which causes the relocation to ke kept around for objtool. And
at the same time, the kvm_fastop_exception definition (which is done as
an inline asm statement) doesn't actually set the type of the global,
which then makes objtool unhappy.
The minimal fix is to just not mark kvm_fastop_exception as being a
global symbol. It's only used in that one compilation unit anyway, so
it was always pointless. That's how all the other local exception table
labels are done.
I'm not entirely happy about the kinds of games that the kvm code plays
with doing its own exception handling, and the fact that it confused
objtool is most definitely a symptom of the code being a bit too subtle
and ad-hoc. But at least this trivial one-liner makes objtool no longer
upset about what is going on.
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure the destroy callback is reset when a event initialization
fails
- Update the event constraints for Icelake
- Make sure the active time of an event is updated even for inactive
events
* tag 'perf_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix userpage->time_enabled of inactive events
perf/x86/intel: Update event constraints for ICX
perf/x86: Reset destroy callback on event init failure
|
|
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
|
|
According to the latest event list, the event encoding 0xEF is only
available on the first 4 counters. Add it into the event constraints
table.
Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com
|
|
perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).
Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.
This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid
|
|
On recent Intel systems the HPET stops working when the system reaches PC10
idle state.
The approach of adding PCI ids to the early quirks to disable HPET on
these systems is a whack a mole game which makes no sense.
Check for PC10 instead and force disable HPET if supported. The check is
overbroad as it does not take ACPI, intel_idle enablement and command
line parameters into account. That's fine as long as there is at least
PMTIMER available to calibrate the TSC frequency. The decision can be
overruled by adding "hpet=force" on the kernel command line.
Remove the related early PCI quirks for affected Ice Cake and Coffin Lake
systems as they are not longer required. That should also cover all
other systems, i.e. Tiger Rag and newer generations, which are most
likely affected by this as well.
Fixes: Yet another hardware trainwreck
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
|
|
After returning from a VMGEXIT NAE event, SW_EXITINFO1[31:0] is checked
for a value of 1, which indicates an error and that SW_EXITINFO2
contains exception information. However, future versions of the GHCB
specification may define new values for SW_EXITINFO1[31:0], so really
any non-zero value should be treated as an error.
Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/efc772af831e9e7f517f0439b13b41f56bad8784.1633063321.git.thomas.lendacky@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
Check whether a CPUID entry's index is significant before checking for a
matching index to hack-a-fix an undefined behavior bug due to consuming
uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve
CPUID.0x1, which does _not_ have a significant index, and fails to
initialize the dummy variable that doubles as EBX/ECX/EDX output _and_
ECX, a.k.a. index, input.
Practically speaking, it's _extremely_ unlikely any compiler will yield
code that causes problems, as the compiler would need to inline the
kvm_cpuid() call to detect the uninitialized data, and intentionally hose
the kernel, e.g. insert ud2, instead of simply ignoring the result of
the index comparison.
Although the sketchy "dummy" pattern was introduced in SVM by commit
66f7b72e1171 ("KVM: x86: Make register state after reset conform to
specification"), it wasn't actually broken until commit 7ff6c0350315
("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the
order of operations such that "index" was checked before the significant
flag.
Avoid consuming uninitialized data by reverting to checking the flag
before the index purely so that the fix can be easily backported; the
offending RESET/INIT code has been refactored, moved, and consolidated
from vendor code to common x86 since the bug was introduced. A future
patch will directly address the bad RESET/INIT behavior.
The undefined behavior was detected by syzbot + KernelMemorySanitizer.
BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68
BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103
BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline]
kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline]
kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885
kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534
vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788
kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020
Local variable ----dummy@kvm_vcpu_reset created at:
kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812
kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping")
Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210929222426.1855730-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There're other modules might use hv_clock_per_cpu variable like ptp_kvm,
so move it into kvmclock.h and export the symbol to make it visiable to
other modules.
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This contains fixes for a resource leak in ccp as well as stack
corruption in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix frame pointer stack corruption
crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
|
|
Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.
The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.
Before, dst=r0 (%rax) src=r2 (%rsi):
[...]
c5: mov %rax,%r10
c8: mov 0x0(%rax),%rax <---+ (broken)
cc: mov %rax,%r11 |
cf: and %rsi,%r11 |
d2: lock cmpxchg %r11,0x0(%rax) <---+
d8: jne 0x00000000000000c8 |
da: mov %rax,%rsi |
dd: mov %r10,%rax |
[...] |
|
After, dst=r0 (%rax) src=r2 (%rsi): |
|
[...] |
da: mov %rax,%r10 |
dd: mov 0x0(%r10),%rax <---+ (fixed)
e1: mov %rax,%r11 |
e4: and %rsi,%r11 |
e7: lock cmpxchg %r11,0x0(%r10) <---+
ed: jne 0x00000000000000dd
ef: mov %rax,%rsi
f2: mov %r10,%rax
[...]
The remaining combinations were fine as-is though:
After, dst=r9 (%r15) src=r0 (%rax):
[...]
dc: mov %rax,%r10
df: mov 0x0(%r15),%rax
e3: mov %rax,%r11
e6: and %r10,%r11
e9: lock cmpxchg %r11,0x0(%r15)
ef: jne 0x00000000000000df _
f1: mov %rax,%r10 | (unneeded, but
f4: mov %r10,%rax _| not a problem)
[...]
After, dst=r9 (%r15) src=r4 (%rcx):
[...]
de: mov %rax,%r10
e1: mov 0x0(%r15),%rax
e5: mov %rax,%r11
e8: and %rcx,%r11
eb: lock cmpxchg %r11,0x0(%r15)
f1: jne 0x00000000000000e1
f3: mov %rax,%rcx
f6: mov %r10,%rax
[...]
The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.
After, dst=r0 (%rax) src=r0 (%rax):
[...]
eb: mov %rax,%r10
ee: mov 0x0(%r10),%rax
f2: mov %rax,%r11
f5: and %r10,%r11
f8: lock cmpxchg %r11,0x0(%r10)
fe: jne 0x00000000000000ee
100: mov %rax,%r10
103: mov %r10,%rax
[...]
Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
|
|
When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry,
clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i].
Modifying guest_uret_msrs directly is completely broken as 'i' does not
point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an
out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior
loop. By sheer dumb luck, the fallout is limited to "only" failing to
preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is
benign as it's guaranteed to clear a bit in a guest MSR value, which are
always zero at vCPU creation on both x86-64 and i386.
Cc: stable@vger.kernel.org
Fixes: 8ea8b8d6f869 ("KVM: VMX: Use common x86's uret MSR list as the one true list")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Prevent sending the wrong signal when protection keys are enabled
and the kernel handles a fault in the vsyscall emulation.
- Invoke early_reserve_memory() before invoking e820_memory_setup()
which is required to make the Xen dom0 e820 hooks work correctly.
- Use the correct data type for the SETZ operand in the EMQCMDS
instruction wrapper.
- Prevent undefined behaviour to the potential unaligned accesss in
the instruction decoder library"
* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
x86/asm: Fix SETZ size enqcmds() build failure
x86/setup: Call early_reserve_memory() earlier
x86/fault: Fix wrong signal when vsyscall fails with pkey
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
|
|
Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as
these are forms of undefined behavior:
"A pointer to an object or incomplete type may be converted to a pointer
to a different object or incomplete type. If the resulting pointer
is not correctly aligned for the pointed-to type, the behavior is
undefined."
(from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf)
These problems were identified using the undefined behavior sanitizer
(ubsan) with the tools version of the code and perf test.
[ bp: Massage commit message. ]
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com
|
|
sm4_aesni_avx_crypt8() sets up the frame pointer (which includes pushing
RBP) before doing a conditional sibling call to sm4_aesni_avx_crypt4(),
which sets up an additional frame pointer. Things will not go well when
sm4_aesni_avx_crypt4() pops only the innermost single frame pointer and
then tries to return to the outermost frame pointer.
Sibling calls need to occur with an empty stack frame. Do the
conditional sibling call *before* setting up the stack pointer.
This fixes the following warning:
arch/x86/crypto/sm4-aesni-avx-asm_64.o: warning: objtool: sm4_aesni_avx_crypt8()+0x8: sibling call from callable instruction with modified stack frame
Fixes: a7ee22ee1445 ("crypto: x86/sm4 - add AES-NI/AVX/x86_64 implementation")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If gpte is changed from non-present to present, the guest doesn't need
to flush tlb per SDM. So the host must synchronze sp before
link it. Otherwise the guest might use a wrong mapping.
For example: the guest first changes a level-1 pagetable, and then
links its parent to a new place where the original gpte is non-present.
Finally the guest can access the remapped area without flushing
the tlb. The guest's behavior should be allowed per SDM, but the host
kvm mmu makes it wrong.
Fixes: 4731d4c7a077 ("KVM: MMU: out of sync shadow core")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210918005636.3675-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When kvm->tlbs_dirty > 0, some rmaps might have been deleted
without flushing tlb remotely after kvm_sync_page(). If @gfn
was writable before and it's rmaps was deleted in kvm_sync_page(),
and if the tlb entry is still in a remote running VCPU, the @gfn
is not safely protected.
To fix the problem, kvm_sync_page() does the remote flush when
needed to avoid the problem.
Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210918005636.3675-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These field correspond to features that we don't expose yet to L2
While currently there are no CVE worthy features in this field,
if AMD adds more features to this field, that could allow guest
escapes similar to CVE-2021-3653 and CVE-2021-3656.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
GP SVM errata workaround made the #GP handler always emulate
the SVM instructions.
However these instructions #GP in case the operand is not 4K aligned,
but the workaround code didn't check this and we ended up
emulating these instructions anyway.
This is only an emulation accuracy check bug as there is no harm for
KVM to read/write unaligned vmcb images.
Fixes: 82a11e9c6fa2 ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In svm_clear_vintr we try to restore the virtual interrupt
injection that might be pending, but we fail to restore
the interrupt vector.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When building under GCC 4.9 and 5.5:
arch/x86/include/asm/special_insns.h: Assembler messages:
arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz'
Change the type to "bool" for condition code arguments, as documented.
Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org
|
