| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of cleanups across x86:
- Use memremap() for the EISA probe instead of ioremap(). EISA is
strictly memory and not MMIO
- Cleanups and enhancement all over the place"
* tag 'x86-cleanups-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/EISA: Dereference memory directly instead of using readl()
x86/extable: Remove unused declaration fixup_bug()
x86/boot/64: Strip percpu address space when setting up GDT descriptors
x86/cpu: Clarify the error message when BIOS does not support SGX
x86/kexec: Add comments around swap_pages() assembly to improve readability
x86/kexec: Fix a comment of swap_pages() assembly
x86/sgx: Fix a W=1 build warning in function comment
x86/EISA: Use memremap() to probe for the EISA BIOS signature
x86/mtrr: Remove obsolete declaration for mtrr_bp_restore()
x86/cpu_entry_area: Annotate percpu_setup_exception_stacks() as __init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Thomas Gleixner:
"Updates for KCOV instrumentation on x86:
- Prevent spurious KCOV coverage in common_interrupt()
- Fixup the KCOV Makefile directive which got stale due to a source
file rename
- Exclude stack unwinding from KCOV as it creates large amounts of
uninteresting coverage
- Provide a self test to validate that KCOV coverage of the interrupt
handling code starts not before preempt count got updated"
* tag 'x86-build-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Ignore stack unwinding in KCOV
module: Fix KCOV-ignored file name
kcov: Add interrupt handling self test
x86/entry: Remove unwanted instrumentation in common_interrupt()
|
|
It is really time.
x86 has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on x86.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240906111841.562402-2-bigeasy@linutronix.de
|
|
Helpers to install and detect special pmd/pud entries. In short, bit 9 on
x86 is not used for pmd/pud, so we can directly define them the same as
the pte level. One note is that it's also used in _PAGE_BIT_CPA_TEST but
that is only used in the debug test, and shouldn't conflict in this case.
One note is that pxx_set|clear_flags() for pmd/pud will need to be moved
upper so that they can be referenced by the new special bit helpers.
There's no change in the code that was moved.
Link: https://lkml.kernel.org/r/20240826204353.2228736-18-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the new API that can understand huge pfn mappings.
Link: https://lkml.kernel.org/r/20240826204353.2228736-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"These fix a deadlock in the SGX NUMA allocator.
It's probably only triggerable today on servers with buggy BIOSes, but
it's theoretically possible it can happen on less goofy systems"
* tag 'x86_sgx_for_6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Log information when a node lacks an EPC section
x86/sgx: Fix deadlock in SGX NUMA node search
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- Add CONFIG_ option for every hw CPU mitigation. The intent is to
support configurations and scenarios where the mitigations code is
irrelevant
- Other small fixlets and improvements
* tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix handling when SRSO mitigation is disabled
x86/bugs: Add missing NO_SSB flag
Documentation/srso: Document a method for checking safe RET operates properly
x86/bugs: Add a separate config for GDS
x86/bugs: Remove GDS Force Kconfig option
x86/bugs: Add a separate config for SSB
x86/bugs: Add a separate config for Spectre V2
x86/bugs: Add a separate config for SRBDS
x86/bugs: Add a separate config for Spectre v1
x86/bugs: Add a separate config for RETBLEED
x86/bugs: Add a separate config for L1TF
x86/bugs: Add a separate config for MMIO Stable Data
x86/bugs: Add a separate config for TAA
x86/bugs: Add a separate config for MDS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add the final conversions to the new Intel VFM CPU model matching
macros which include the vendor and finally drop the old ones which
hardcode family 6
* tag 'x86_cpu_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vfm: Delete all the *_FAM6_ CPU #defines
x86/cpu/vfm: Delete X86_MATCH_INTEL_FAM6_MODEL[_STEPPING]() macros
extcon: axp288: Switch to new Intel CPU model defines
x86/cpu/intel: Replace PAT erratum model/family magic numbers with symbolic IFM references
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- A bunch of cleanups to the sev-guest driver. All in preparation for
future SEV work
* tag 'x86_sev_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sev-guest: Ensure the SNP guest messages do not exceed a page
virt: sev-guest: Fix user-visible strings
virt: sev-guest: Rename local guest message variables
virt: sev-guest: Replace dev_dbg() with pr_debug()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Reorganize the struct mce populating functions so that MCA errors
reported through BIOS' BERT method can report the correct CPU number
the error has been detected on
* tag 'ras_core_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Use mce_prep_record() helpers for apei_smca_report_x86_error()
x86/mce: Define mce_prep_record() helpers for common and per-CPU fields
x86/mce: Rename mce_setup() to mce_prep_record()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
- Simplify microcode patches loading on AMD Zen and newer by using the
family, model and stepping encoded in the patch revision number
- Fix a silly clang warning
* tag 'x86_microcode_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix a -Wsometimes-uninitialized clang false positive
x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
Pull kvm fix from Paolo Bonzini:
"Do not always honor guest PAT on CPUs that support self-snoop.
This triggers an issue in the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM.
The revert lets video RAM use the WB memory type instead of the slower
UC memory type"
* tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
|
|
This reverts commit 377b2f359d1f71c75f8cc352b5c81f2210312d83.
This caused a regression with the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM. After the commit, the
WB memory type is used without the IGNORE_PAT, resulting in the slower
UC memory type. In fact, UC is slow enough to basically cause guests
to not boot... but only on new processors such as Sapphire Rapids and
Cascade Lake. Coffee Lake for example works properly, though that might
also be an effect of being on a larger, more NUMA system.
The driver has been fixed but that does not help older guests. Until we
figure out whether Cascade Lake and newer processors are working as
intended, revert the commit. Long term we might add a quirk, but the
details depend on whether the processors are working as intended: for
example if they are, the quirk might reference bochs-compatible devices,
e.g. in the name and documentation, so that userspace can disable the
quirk by default and only leave it enabled if such a device is being
exposed to the guest.
If instead this is actually a bug in CLX+, then the actions we need to
take are different and depend on the actual cause of the bug.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Without a prototype, we'll have to add a prototype for each architecture
implementing vDSO getrandom. As most architectures will likely have the
vDSO getrandom implemented in a near future, and we'd like to keep the
declarations compatible everywhere (to ease the libc implementor work),
we should really just have one copy of the prototype.
This also is what's already done inside of include/vdso/gettime.h for
those vDSO functions, so this continues that convention.
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
[Jason: rewrite docbook comment for prototype.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Depending on the architecture, building a 32-bit vDSO on a 64-bit kernel
is problematic when some system headers are included.
Minimise the amount of headers by moving needed items, such as
__{get,put}_unaligned_t, into dedicated common headers and in general
use more specific headers, similar to what was done in commit
8165b57bca21 ("linux/const.h: Extract common header for vDSO") and
commit 8c59ab839f52 ("lib/vdso: Enable common headers").
On some architectures this results in missing PAGE_SIZE, as was
described by commit 8b3843ae3634 ("vdso/datapage: Quick fix - use
asm/page-def.h for ARM64"), so define this if necessary, in the same way
as done prior by commit cffaefd15a8f ("vdso: Use CONFIG_PAGE_SHIFT in
vdso/datapage.h").
Removing linux/time64.h leads to missing 'struct timespec64' in
x86's asm/pvclock.h. Add a forward declaration of that struct in
that file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
_vdso_data is specific to x86 and __arch_get_k_vdso_data() is provided
so that all architectures can provide the requested pointer.
Do the same with _vdso_rng_data, provide __arch_get_k_vdso_rng_data()
and don't use x86 _vdso_rng_data directly.
Until now vdso/vsyscall.h was only included by time/vsyscall.c but now
it will also be included in char/random.c, leading to a duplicate
declaration of _vdso_data and _vdso_rng_data.
To fix this issue, move the declaration in a C file. vma.c looks like
the most appropriate candidate. We don't need to replace the definitions
in vsyscall.h by declarations as declarations are already in asm/vvar.h.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Having the prototype for __arch_chacha20_blocks_nostack in
arch/x86/include/asm/vdso/getrandom.h meant that the prototype and large
doc comment were cloned by every architecture, which has been causing
unnecessary churn. Instead move it into include/vdso/getrandom.h, where
it can be shared by all archs implementing it.
As a side bonus, this then lets us use that prototype in the
vdso_test_chacha self test, to ensure that it matches the source, and
indeed doing so turned up some inconsistencies, which are rectified
here.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This header no longer serves a purpose after show_trace was removed
by commit 9d1ee8ce92e1 ("um: Rewrite show_stack()").
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If this memset() is not inlined than PVH early boot code can call
into KASAN-instrumented memset() which results in unbootable VMs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240802154253.482658-3-adobriyan@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
If this memcmp() is not inlined then PVH early boot code can call
into KASAN-instrumented memcmp() which results in unbootable VMs:
pvh_start_xen
xen_prepare_pvh
xen_cpuid_base
hypervisor_cpuid_base
memcmp
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240802154253.482658-2-adobriyan@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Uninstrument arch/x86/platform/pvh/enlighten.c: KASAN has not been setup
_this_ early in the boot process.
Steps to reproduce:
make allnoconfig
make sure CONFIG_AMD_MEM_ENCRYPT is disabled
AMD_MEM_ENCRYPT independently uninstruments lib/string.o
so PVH boot code calls into uninstrumented memset() and
memcmp() which can make the bug disappear depending on
the compiler.
enable CONFIG_PVH
enable CONFIG_KASAN
enable serial console
this is fun exercise if you never done it from nothing :^)
make
qemu-system-x86_64 \
-enable-kvm \
-cpu host \
-smp cpus=1 \
-m 4096 \
-serial stdio \
-kernel vmlinux \
-append 'console=ttyS0 ignore_loglevel'
Messages on serial console will easily tell OK kernel from unbootable
kernel. In bad case qemu hangs in an infinite loop stroboscoping
"SeaBIOS" message.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240802154253.482658-1-adobriyan@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to minimize required special handling for running as Xen PV
dom0, the memory layout is modified to match that of the host. This
requires to have only RAM at the locations where Xen allocated memory
is living. Unfortunately there seem to be some machines, where ACPI
NVS is located at 64 MB, resulting in a conflict with the loaded
kernel or the initial page tables built by Xen.
Avoid this conflict by swapping the ACPI NVS area in the memory map
with unused RAM. This is possible via modification of the dom0 P2M map.
Accesses to the ACPI NVS area are done either for saving and restoring
it across suspend operations (this will work the same way as before),
or by ACPI code when NVS memory is referenced from other ACPI tables.
The latter case is handled by a Xen specific indirection of
acpi_os_ioremap().
While the E820 map can (and should) be modified right away, the P2M
map can be updated only after memory allocation is working, as the P2M
map might need to be extended.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When running as a Xen PV dom0 the system needs to map ACPI data of the
host using host physical addresses, while those addresses can conflict
with the guest physical addresses of the loaded linux kernel. The same
problem might apply in case a PV guest is configured to use the host
memory map.
This conflict can be solved by mapping the ACPI data to a different
guest physical address, but mapping the data via acpi_os_ioremap()
must still be possible using the host physical address, as this
address might be generated by AML when referencing some of the ACPI
data.
When configured to support running as a Xen PV domain, have an
implementation of acpi_os_ioremap() being aware of the possibility to
need above mentioned translation of a host physical address to the
guest physical address.
This modification requires to #include linux/acpi.h in some sources
which need to include asm/acpi.h directly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Merge cpufreq updates for 6.12-rc1:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).
- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).
- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).
- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).
- Add extra unit test coverage for mode state machine (Mario
Limonciello).
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).
* pm-cpufreq: (35 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:
"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"
* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
|
|
amd_get_boost_ratio_numerator()
The special case in amd_pstate_highest_perf_set() is the value used
for calculating the boost numerator. Merge this into
amd_get_boost_ratio_numerator() and then use that to calculate boost
ratio.
This allows dropping more special casing of the highest perf value.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
AMD systems that support preferred cores will use "166" as their
numerator for max frequency calculations instead of "255".
Add a function for detecting preferred cores by looking at the
highest perf value on all cores.
If preferred cores are enabled return 166 and if disabled the
value in the highest perf register. As the function will be called
multiple times, cache the values for the boost numerator and if
preferred cores will be enabled in global variables.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_pstate_get_highest_perf() is a helper used to get the highest perf
value on AMD systems. It's used in amd-pstate as part of preferred
core handling, but applicable for acpi-cpufreq as well.
Move it out to cppc handling code as amd_get_highest_perf().
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If the boost ratio isn't calculated properly for the system for any
reason this can cause other problems that are non-obvious.
Raise all messages to warn instead.
Suggested-by: Perry Yuan <Perry.Yuan@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
perf_ratio is a u64 and SCHED_CAPACITY_SCALE is a large number.
Shifting by one will never have a zero value.
Drop the check.
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.sheoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.
Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
To prepare to let amd_get_highest_perf() detect preferred cores
it will require CPPC functions. Move amd_get_highest_perf() to
cppc.c to prepare for 'preferred core detection' rework.
No functional changes intended.
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove superfluous RSB filling after a VMEXIT when the CPU already has
flushed the RSB after a VMEXIT when AutoIBRS is enabled.
The initial implementation for adding RETPOLINES added an ALTERNATIVES
implementation for filling the RSB after a VMEXIT in commit 117cc7a908c8
("x86/retpoline: Fill return stack buffer on vmexit").
Later, X86_FEATURE_RSB_VMEXIT was added in commit 9756bba28470
("x86/speculation: Fill RSB on vmexit for IBRS") to handle stuffing the
RSB if RETPOLINE=y *or* KERNEL_IBRS=y, i.e. to also stuff the RSB if the
kernel is configured to do IBRS mitigations on entry/exit.
The AutoIBRS (on AMD) feature implementation added in commit e7862eda309e
("x86/cpu: Support AMD Automatic IBRS") used the already-implemented logic
for EIBRS in spectre_v2_determine_rsb_fill_type_on_vmexit() -- but did not
update the code at VMEXIT to act on the mode selected in that function --
resulting in VMEXITs continuing to clear the RSB when RETPOLINES are
enabled, despite the presence of AutoIBRS.
Signed-off-by: Amit Shah <amit.shah@amd.com>
Link: https://lore.kernel.org/r/20240807123531.69677-1-amit@kernel.org
[sean: massage changeloge, drop comment about AMD not needing RSB_VMEXIT_LITE]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When running as a Xen PV dom0 it can happen that the kernel is being
loaded to a guest physical address conflicting with the host memory
map.
In order to be able to resolve this conflict, add the capability to
remap non-RAM areas to different guest PFNs. A function to use this
remapping information for other purposes than doing the remap will be
added when needed.
As the number of conflicts should be rather low (currently only
machines with max. 1 conflict are known), save the remap data in a
small statically allocated array.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
To update with the latest fixes.
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The BPF subsystem may capture LBR data on a counting event. However, the
current implementation assumes that LBR can/should only be used with
sampling events.
For instance, retsnoop tool ([0]) makes an extensive use of this
functionality and sets up perf event as follows:
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
attr.sample_type = PERF_SAMPLE_BRANCH_STACK;
attr.branch_sample_type = PERF_SAMPLE_BRANCH_KERNEL;
To limit the LBR for a sampling event is to avoid unnecessary branch
stack setup for a counting event in the sample read. Because LBR is only
read in the sampling event's overflow.
Although in most cases LBR is used in sampling, there is no HW limit to
bind LBR to the sampling mode. Allow an LBR setup for a counting event
unless in the sample read mode.
Fixes: 85846b27072d ("perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag")
Closes: https://lore.kernel.org/lkml/20240905180055.1221620-1-andrii@kernel.org/
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240909155848.326640-1-kan.liang@linux.intel.com
|
|
There are three cstate PMUs with different scopes, core, die and module.
The scopes are supported by the generic perf_event subsystem now.
Set the scope for each PMU and remove all the cpumask and hotplug codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-4-kan.liang@linux.intel.com
|
|
Instead of having max_pfn as a local variable of xen_memory_setup(),
make it a static variable in setup.c instead. This avoids having to
pass it to subfunctions, which will be needed in more cases in future.
Rename it to ini_nr_pages, as the value denotes the currently usable
number of memory pages as passed from the hypervisor at boot time.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Move the checks for e820 memory map conflicts using the
xen_chk_is_e820_usable() helper further up in order to prepare
resolving some of the possible conflicts by doing some e820 map
modifications, which must happen before evaluating the RAM layout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When booting as a Xen PV dom0 the memory layout of the dom0 is
modified to match that of the host, as this requires less changes in
the kernel for supporting Xen.
There are some cases, though, which are problematic, as it is the Xen
hypervisor selecting the kernel's load address plus some other data,
which might conflict with the host's memory map.
These conflicts are detected at boot time and result in a boot error.
In order to support handling at least some of these conflicts in
future, introduce a generic helper function which will later gain the
ability to adapt the memory layout when possible.
Add the missing check for the xen_start_info area.
Note that possible p2m map and initrd memory conflicts are handled
already by copying the data to memory areas not conflicting with the
memory map. The initial stack allocated by Xen doesn't need to be
checked, as early boot code is switching to the statically allocated
initial kernel stack. Initial page tables and the kernel itself will
be handled later.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Set PFERR_GUEST_{FINAL,PAGE}_MASK based on EPT_VIOLATION_GVA_TRANSLATED if
and only if EPT_VIOLATION_GVA_IS_VALID is also set in exit qualification.
Per the SDM, bit 8 (EPT_VIOLATION_GVA_TRANSLATED) is valid if and only if
bit 7 (EPT_VIOLATION_GVA_IS_VALID) is set, and is '0' if bit 7 is '0'.
Bit 7 (a.k.a. EPT_VIOLATION_GVA_IS_VALID)
Set if the guest linear-address field is valid. The guest linear-address
field is valid for all EPT violations except those resulting from an
attempt to load the guest PDPTEs as part of the execution of the MOV CR
instruction and those due to trace-address pre-translation
Bit 8 (a.k.a. EPT_VIOLATION_GVA_TRANSLATED)
If bit 7 is 1:
• Set if the access causing the EPT violation is to a guest-physical
address that is the translation of a linear address.
• Clear if the access causing the EPT violation is to a paging-structure
entry as part of a page walk or the update of an accessed or dirty bit.
Reserved if bit 7 is 0 (cleared to 0).
Failure to guard the logic on GVA_IS_VALID results in KVM marking the page
fault as PFERR_GUEST_PAGE_MASK when there is no known GVA, which can put
the vCPU into an infinite loop due to kvm_mmu_page_fault() getting false
positive on its PFERR_NESTED_GUEST_PAGE logic (though only because that
logic is also buggy/flawed).
In practice, this is largely a non-issue because so GVA_IS_VALID is almost
always set. However, when TDX comes along, GVA_IS_VALID will *never* be
set, as the TDX Module deliberately clears bits 12:7 in exit qualification,
e.g. so that the faulting virtual address and other metadata that aren't
practically useful for the hypervisor aren't leaked to the untrusted host.
When exit is due to EPT violation, bits 12-7 of the exit qualification
are cleared to 0.
Fixes: eebed2438923 ("kvm: nVMX: Add support for fast unprotection of nested guest page tables")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use KVM_PAGES_PER_HPAGE() instead of open coding equivalent logic that is
anything but obvious.
No functional change intended, and verified by compiling with the below
assertions:
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_4K));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_2M)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_2M));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_1G)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_1G));
Link: https://lore.kernel.org/r/20240809194335.1726916-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
