| Age | Commit message (Collapse) | Author |
|---|
|
Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa
supports three targets: 'Image' (ELF image with reset vector), 'zImage'
(compressed redboot image) and 'uImage' (U-Boot image).
Provide separate 'Image', 'zImage' and 'uImage' make targets that only
build corresponding image type. Make 'all' build all images appropriate
for a platform.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.
Cleanup kernel memory layout macros:
- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There are no .bootstrap or .ResetVector.text sections linked to the
vmlinux image, drop these sections from vmlinux.ld.S. Drop
RESET_VECTOR_VADDR definition only used for .ResetVector.text.
Drop remapped copies of primary and secondary reset vectors, as modern
gdb don't have problems stepping through instructions at arbitrary
locations. Drop corresponding sections from the corresponding linker
scripts.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use
LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try
to link it when building noMMU configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB
way 6:
Way 6 (512 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0x00000000 0x00000000 0x01 0x03 RWX Bypass
0x20000000 0x20000000 0x01 0x03 RWX Bypass
0x40000000 0x40000000 0x01 0x03 RWX Bypass
0x60000000 0x60000000 0x01 0x03 RWX Bypass
0x80000000 0x80000000 0x01 0x03 RWX Bypass
0xa0000000 0xa0000000 0x01 0x03 RWX Bypass
0xc0000000 0xc0000000 0x01 0x03 RWX Bypass
0xe0000000 0xe0000000 0x01 0x03 RWX Bypass
This patch adds remapping code at the reset vector or at the kernel
_start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that
reconfigures MMUv3 as MMUv2:
Way 5 (128 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xd0000000 0x00000000 0x01 0x07 RWX WB
0xd8000000 0x00000000 0x01 0x03 RWX Bypass
Way 6 (256 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xe0000000 0xf0000000 0x01 0x07 RWX WB
0xf0000000 0xf0000000 0x01 0x03 RWX Bypass
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Remove Kconfig entries, boot subdirectory, dependencies from other
boot-* Makefiles, and sections from ld scripts.
Remove stale redboot code that used to pass initrd addresses in a3 and
a4 to _start.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Make vmlinux.tmp and vmlinux.tmp.gz separate build targets, avoid
removing vmlinux.tmp during vmlinux.tmp.gz build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Move all header files for xtensa to arch/xtensa/include and platform and
variant header files to the appropriate arch/xtensa/platforms/ and
arch/xtensa/variants/ directories.
Moving the files gets also rid of all uses of symlinks in the Makefile.
This has been completed already for the majority of the architectures
and xtensa is one out of six missing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
When building with binutils-2.18, vmlinux includes .note.gnu.build-id
sections that need to be stripped out when building the binary image.
The old .xt.insn sections haven't been used for a long time, so don't
bother stripping them.
Signed-off-by: Bob Wilson <bob.wilson@acm.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Move boot-redboot load address from 0xD0200000 to 0xD1000000
to make space for larger kernel images, in particular those with
an embedded initramfs filesystem.
Also properly set the ELF start address in boot-elf images so
that PC need not be set manually when loading them using GDB.
Signed-off-by: Marc Gauthier <marc@tensilica.com>
|
|
The Xtensa port contained many header files that were never needed. This
rather lengthy patch removes all those files. Unfortunately, there were
many dependencies that needed to be updated, so this patch touches quite a
few source files.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor
clean-ups in the make files.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
