path: root/arch/xtensa
AgeCommit message (Collapse)Author
2017-11-17Merge tag 'libnvdimm-for-4.15' of ↵Linus Torvalds
git:// Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler <> - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <>" * tag 'libnvdimm-for-4.15' of git:// (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds
git:// Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git:// (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds
ssh:// Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh:// MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git:// Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git:// (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-14Merge tag 'dma-mapping-4.15' of git:// Torvalds
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git:// dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-14Merge branch 'for-4.15/block' of git:// Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git:// (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git:// Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git:// (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-10xtensa/simdisk: fix compile errorChristoph Hellwig
Fixes: d004a5e7d4dd ("block: remove __bio_kmap_atomic") Signed-off-by: Christoph Hellwig <> Signed-off-by: Jens Axboe <>
2017-11-10block: remove __bio_kmap_atomicChristoph Hellwig
This helper doesn't buy us much over calling kmap_atomic directly. In fact in the only caller it does a bit of useless work as the caller already has the bvec at hand, and said caller would even buggy for a multi-segment bio due to the use of this helper. So just remove it. Signed-off-by: Christoph Hellwig <> Signed-off-by: Jens Axboe <>
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <> Acked-by: Arnd Bergmann <> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <> Acked-by: Arnd Bergmann <> Signed-off-by: Rob Herring <>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <> Signed-off-by: Rob Herring <>
2017-11-07PCI: Remove redundant pci_dev, pci_bus, resource declarationsBjorn Helgaas
<linux/pci.h> defines struct pci_bus and struct pci_dev and includes the struct resource definition before including <asm/pci.h>. Nobody includes <asm/pci.h> directly, so they don't need their own declarations. Remove the redundant struct pci_dev, pci_bus, resource declarations. Signed-off-by: Bjorn Helgaas <> Reviewed-by: Ingo Molnar <> Acked-by: Jesper Nilsson <> # CRIS Acked-by: Ralf Baechle <> # MIPS
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <>
2017-11-03mm: introduce MAP_SHARED_VALIDATE, a mechanism to safely define new mmap flagsDan Williams
The mmap(2) syscall suffers from the ABI anti-pattern of not validating unknown flags. However, proposals like MAP_SYNC need a mechanism to define new behavior that is known to fail on older kernels without the support. Define a new MAP_SHARED_VALIDATE flag pattern that is guaranteed to fail on all legacy mmap implementations. It is worth noting that the original proposal was for a standalone MAP_VALIDATE flag. However, when that could not be supported by all archs Linus observed: I see why you *think* you want a bitmap. You think you want a bitmap because you want to make MAP_VALIDATE be part of MAP_SYNC etc, so that people can do ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_SYNC, fd, 0); and "know" that MAP_SYNC actually takes. And I'm saying that whole wish is bogus. You're fundamentally depending on special semantics, just make it explicit. It's already not portable, so don't try to make it so. Rename that MAP_VALIDATE as MAP_SHARED_VALIDATE, make it have a value of 0x3, and make people do ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED_VALIDATE | MAP_SYNC, fd, 0); and then the kernel side is easier too (none of that random garbage playing games with looking at the "MAP_VALIDATE bit", but just another case statement in that map type thing. Boom. Done. Similar to ->fallocate() we also want the ability to validate the support for new flags on a per ->mmap() 'struct file_operations' instance basis. Towards that end arrange for flags to be generically validated against a mmap_supported_flags exported by 'struct file_operations'. By default all existing flags are implicitly supported, but new flags require MAP_SHARED_VALIDATE and per-instance-opt-in. Cc: Jan Kara <> Cc: Arnd Bergmann <> Cc: Andy Lutomirski <> Cc: Andrew Morton <> Suggested-by: Christoph Hellwig <> Suggested-by: Linus Torvalds <> Reviewed-by: Ross Zwisler <> Signed-off-by: Dan Williams <> Signed-off-by: Jan Kara <> Signed-off-by: Dan Williams <>
2017-11-02xtensa: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Chris Zankel <> Cc: Max Filippov <> Cc: Signed-off-by: Kees Cook <>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with a licenseGreg Kroah-Hartman
Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <> Reviewed-by: Philippe Ombredanne <> Reviewed-by: Thomas Gleixner <> Signed-off-by: Greg Kroah-Hartman <>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with no ↵Greg Kroah-Hartman
license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <> Reviewed-by: Philippe Ombredanne <> Reviewed-by: Thomas Gleixner <> Signed-off-by: Greg Kroah-Hartman <>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <> Reviewed-by: Philippe Ombredanne <> Reviewed-by: Thomas Gleixner <> Signed-off-by: Greg Kroah-Hartman <>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <> Signed-off-by: Paul E. McKenney <> Cc: Linus Torvalds <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Link: Signed-off-by: Ingo Molnar <>
2017-10-19dma-mapping: turn dma_cache_sync into a dma_map_ops methodChristoph Hellwig
After we removed all the dead wood it turns out only two architectures actually implement dma_cache_sync as a real op: mips and parisc. Add a cache_sync method to struct dma_map_ops and implement it for the mips defualt DMA ops, and the parisc pa11 ops. Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but never provided a functional dma_cache_sync implementations, which seems somewhat odd. Signed-off-by: Christoph Hellwig <> Reviewed-by: Robin Murphy <>
2017-10-19xtensa: make dma_cache_sync a no-opChristoph Hellwig
xtensa does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't make any sense to do any work in dma_cache_sync given that it must be a no-op when dma_alloc_attrs returns coherent memory. Signed-off-by: Christoph Hellwig <> Reviewed-by: Robin Murphy <>
2017-10-12treewide: Fix typos in KconfigMasanari Iida
This patch fixes some spelling typos found in Kconfig files. Signed-off-by: Masanari Iida <> Acked-by: Randy Dunlap <> Signed-off-by: Jiri Kosina <>
2017-10-10locking/arch: Remove dummy arch_{read,spin,write}_lock_flags() implementationsWill Deacon
The arch_{read,spin,write}_lock_flags() macros are simply mapped to the non-flags versions by the majority of architectures, so do this in core code and remove the dummy implementations. Also remove the implementation in spinlock_up.h, since all callers of do_raw_spin_lock_flags() call local_irq_save(flags) anyway. Signed-off-by: Will Deacon <> Signed-off-by: Peter Zijlstra (Intel) <> Cc: Linus Torvalds <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Link: Signed-off-by: Ingo Molnar <>
2017-10-10locking/core: Remove {read,spin,write}_can_lock()Will Deacon
Outside of the locking code itself, {read,spin,write}_can_lock() have no users in tree. Apparmor (the last remaining user of write_can_lock()) got moved over to lockdep by the previous patch. This patch removes the use of {read,spin,write}_can_lock() from the BUILD_LOCK_OPS macro, deferring to the trylock operation for testing the lock status, and subsequently removes the unused macros altogether. They aren't guaranteed to work in a concurrent environment and can give incorrect results in the case of qrwlock. Signed-off-by: Will Deacon <> Signed-off-by: Peter Zijlstra (Intel) <> Cc: Linus Torvalds <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Link: Signed-off-by: Ingo Molnar <>
2017-09-22arch: remove unused *_segments() macros/functionsTobias Klauser
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: Tobias Klauser <> Acked-by: Vineet Gupta <> [for arch/arc] Signed-off-by: Linus Torvalds <>
2017-09-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - various misc bits - DAX updates - OCFS2 - most of MM * emailed patches from Andrew Morton <>: (119 commits) mm,fork: introduce MADV_WIPEONFORK x86,mpx: make mpx depend on x86-64 to free up VMA flag mm: add /proc/pid/smaps_rollup mm: hugetlb: clear target sub-page last when clearing huge page mm: oom: let oom_reap_task and exit_mmap run concurrently swap: choose swap device according to numa node mm: replace TIF_MEMDIE checks by tsk_is_oom_victim mm, oom: do not rely on TIF_MEMDIE for memory reserves access z3fold: use per-cpu unbuddied lists mm, swap: don't use VMA based swap readahead if HDD is used as swap mm, swap: add sysfs interface for VMA based swap readahead mm, swap: VMA based swap readahead mm, swap: fix swap readahead marking mm, swap: add swap readahead hit statistics mm/vmalloc.c: don't reinvent the wheel but use existing llist API mm/vmstat.c: fix wrong comment selftests/memfd: add memfd_create hugetlbfs selftest mm/shmem: add hugetlbfs support to memfd_create() mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas() ...
2017-09-06mm,fork: introduce MADV_WIPEONFORKRik van Riel
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty in the child process after fork. This differs from MADV_DONTFORK in one important way. If a child process accesses memory that was MADV_WIPEONFORK, it will get zeroes. The address ranges are still valid, they are just empty. If a child process accesses memory that was MADV_DONTFORK, it will get a segmentation fault, since those address ranges are no longer valid in the child after fork. Since MADV_DONTFORK also seems to be used to allow very large programs to fork in systems with strict memory overcommit restrictions, changing the semantics of MADV_DONTFORK might break existing programs. MADV_WIPEONFORK only works on private, anonymous VMAs. The use case is libraries that store or cache information, and want to know that they need to regenerate it in the child process after fork. Examples of this would be: - systemd/pulseaudio API checks (fail after fork) (replacing a getpid check, which is too slow without a PID cache) - PKCS#11 API reinitialization check (mandated by specification) - glibc's upcoming PRNG (reseed after fork) - OpenSSL PRNG (reseed after fork) The security benefits of a forking server having a re-inialized PRNG in every child process are pretty obvious. However, due to libraries having all kinds of internal state, and programs getting compiled with many different versions of each library, it is unreasonable to expect calling programs to re-initialize everything manually after fork. A further complication is the proliferation of clone flags, programs bypassing glibc's functions to call clone directly, and programs calling unshare, causing the glibc pthread_atfork hook to not get called. It would be better to have the kernel take care of this automatically. The patch also adds MADV_KEEPONFORK, to undo the effects of a prior MADV_WIPEONFORK. This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO: [ numerically order arch/parisc/include/uapi/asm/mman.h #defines] Link: Signed-off-by: Rik van Riel <> Reported-by: Florian Weimer <> Reported-by: Colm MacCártaigh <> Reviewed-by: Mike Kravetz <> Cc: "H. Peter Anvin" <> Cc: "Kirill A. Shutemov" <> Cc: Andy Lutomirski <> Cc: Dave Hansen <> Cc: Ingo Molnar <> Cc: Helge Deller <> Cc: Kees Cook <> Cc: Matthew Wilcox <> Cc: Thomas Gleixner <> Cc: Will Drewry <> Cc: <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2017-09-06mm: arch: consolidate mmap hugetlb size encodingsMike Kravetz
A non-default huge page size can be encoded in the flags argument of the mmap system call. The definitions for these encodings are in arch specific header files. However, all architectures use the same values. Consolidate all the definitions in the primary user header file (uapi/linux/mman.h). Include definitions for all known huge page sizes. Use the generic encoding definitions in hugetlb_encode.h as the basis for these definitions. Link: Signed-off-by: Mike Kravetz <> Acked-by: Michal Hocko <> Cc: Andi Kleen <> Cc: Andrea Arcangeli <> Cc: Aneesh Kumar K.V <> Cc: Anshuman Khandual <> Cc: Arnd Bergmann <> Cc: Davidlohr Bueso <> Cc: Matthew Wilcox <> Cc: Michael Kerrisk <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2017-09-06Merge git:// Torvalds
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git:// (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-04Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git:// Pull locking updates from Ingo Molnar: - Add 'cross-release' support to lockdep, which allows APIs like completions, where it's not the 'owner' who releases the lock, to be tracked. It's all activated automatically under CONFIG_PROVE_LOCKING=y. - Clean up (restructure) the x86 atomics op implementation to be more readable, in preparation of KASAN annotations. (Dmitry Vyukov) - Fix static keys (Paolo Bonzini) - Add killable versions of down_read() et al (Kirill Tkhai) - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini) - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra) - Remove smp_mb__before_spinlock() and convert its usages, introduce smp_mb__after_spinlock() (Peter Zijlstra) * 'locking-core-for-linus' of git:// (56 commits) locking/lockdep/selftests: Fix mixed read-write ABBA tests sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK() acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures smp: Avoid using two cache lines for struct call_single_data locking/lockdep: Untangle xhlock history save/restore from task independence locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being futex: Remove duplicated code and fix undefined behaviour Documentation/locking/atomic: Finish the document... locking/lockdep: Fix workqueue crossrelease annotation workqueue/lockdep: 'Fix' flush_work() annotation locking/lockdep/selftests: Add mixed read-write ABBA tests mm, locking/barriers: Clarify tlb_flush_pending() barriers locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive locking/lockdep: Explicitly initialize wq_barrier::done::map locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING locking/refcounts, x86/asm: Implement fast refcount overflow protection locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease ...
2017-09-04Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git:// Pull perf updates from Ingo Molnar: "Kernel side changes: - Add branch type profiling/tracing support. (Jin Yao) - Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of physical memory addresses, where the PMU supports it. (Kan Liang) - Export some PMU capability details in the new /sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi Kleen) - Aux data fixes and updates (Will Deacon) - kprobes fixes and updates (Masami Hiramatsu) - AMD uncore PMU driver fixes and updates (Janakarajan Natarajan) On the tooling side, here's a (limited!) list of highlights - there were many other changes that I could not list, see the shortlog and git history for details: UI improvements: - Implement a visual marker for fused x86 instructions in the annotate TUI browser, available now in 'perf report', more work needed to have it available as well in 'perf top' (Jin Yao) Further explanation from one of Jin's patches: │ ┌──cmpl $0x0,argp_program_version_hook 81.93 │ ├──je 20 │ │ lock cmpxchg %esi,0x38a9a4(%rip) │ │↓ jne 29 │ │↓ jmp 43 11.47 │20:└─→cmpxch %esi,0x38a999(%rip) That means the cmpl+je is a fused instruction pair and they should be considered together. - Record the branch type and then show statistics and info about in callchain entries (Jin Yao) Example from one of Jin's patches: # perf record -g -j any,save_type # perf report --branch-history --stdio --no-children 38.50% div.c:45 [.] main div | ---main div.c:42 (RET CROSS_2M cycles:2) compute_flag div.c:28 (cycles:2) compute_flag div.c:27 (RET CROSS_2M cycles:1) rand rand.c:28 (cycles:1) rand rand.c:28 (RET CROSS_2M cycles:1) __random random.c:298 (cycles:1) __random random.c:297 (COND_BWD CROSS_2M cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (COND_BWD CROSS_2M cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (RET CROSS_2M cycles:9) namespaces support: - Add initial support for namespaces, using setns to access files in namespaces, grabbing their build-ids, etc. (Krister Johansen) perf trace enhancements: - Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace' (Arnaldo Carvalho de Melo) - Add initial 'clone' syscall args beautifier in 'perf trace' (Arnaldo Carvalho de Melo) - Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace' (Arnaldo Carvalho de Melo) - Beautifiers for the 'cmd' arg of several ioctl types, including: sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de Melo) - Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data' CTF conversion, allowing CTF trace visualization tools to show callchains and to resolve symbols (Geneviève Bastien) - Beautify the fcntl syscall, which is an interesting one in the sense that infrastructure had to be put in place to change the formatters of some arguments according to the value in a previous one, i.e. cmd dictates how arg and the syscall return will be formatted. (Arnaldo Carvalho de Melo perf stat enhancements: - Use group read for event groups in 'perf stat', reducing overhead when groups are defined in the event specification, i.e. when using {} to enclose a list of events, asking them to be read at the same time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa) pipe mode improvements: - Process tracing data in 'perf annotate' pipe mode (David Carrillo-Cisneros) - Add header record types to pipe-mode, now this command: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header Will show the same as in non-pipe mode, i.e. involving a file (David Carrillo-Cisneros) Vendor specific hardware event support updates/enhancements: - Update POWER9 vendor events tables (Sukadev Bhattiprolu) - Add POWER9 PMU events Sukadev (Bhattiprolu) - Support additional POWER8+ PVR in PMU mapfile (Shriya) - Add Skylake server uncore JSON vendor events (Andi Kleen) - Support exporting Intel PT data to sqlite3 with python perf scripts, this is in addition to the postgresql support that was already there (Adrian Hunter)" * 'perf-core-for-linus' of git:// (253 commits) perf symbols: Fix plt entry calculation for ARM and AARCH64 perf probe: Fix kprobe blacklist checking condition perf/x86: Fix caps/ for !Intel perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR perf/core, pt, bts: Get rid of itrace_started perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments tools headers: Sync cpu features kernel ABI headers with tooling headers perf tools: Pass full path of FEATURES_DUMP perf tools: Robustify detection of clang binary tools lib: Allow external definition of CC, AR and LD perf tools: Allow external definition of flex and bison binary names tools build tests: Don't hardcode gcc name perf report: Group stat values on global event id perf values: Zero value buffers perf values: Fix allocation check perf values: Fix thread index bug perf report: Add dump_read function perf record: Set read_format for inherit_stat perf c2c: Fix remote HITM detection for Skylake perf tools: Fix static build with newer toolchains ...
2017-08-25futex: Remove duplicated code and fix undefined behaviourJiri Slaby
There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby <> Signed-off-by: Thomas Gleixner <> Acked-by: Russell King <> Acked-by: Michael Ellerman <> (powerpc) Acked-by: Heiko Carstens <> [s390] Acked-by: Chris Metcalf <> [for tile] Reviewed-by: Darren Hart (VMware) <> Reviewed-by: Will Deacon <> [core/arm64] Cc: Cc: Rich Felker <> Cc: Cc: Cc: Cc: Benjamin Herrenschmidt <> Cc: Max Filippov <> Cc: Paul Mackerras <> Cc: Cc: Jonas Bonn <> Cc: Cc: Cc: Yoshinori Sato <> Cc: Cc: Helge Deller <> Cc: "James E.J. Bottomley" <> Cc: Catalin Marinas <> Cc: Matt Turner <> Cc: Cc: Fenghua Yu <> Cc: Arnd Bergmann <> Cc: Cc: Stefan Kristiansson <> Cc: Cc: Ivan Kokshaysky <> Cc: Stafford Horne <> Cc: Cc: Richard Henderson <> Cc: Chris Zankel <> Cc: Michal Simek <> Cc: Tony Luck <> Cc: Cc: Vineet Gupta <> Cc: Ralf Baechle <> Cc: Richard Kuo <> Cc: Cc: Martin Schwidefsky <> Cc: Cc: "David S. Miller" <> Link:
2017-08-21Merge branch 'for-mingo' of ↵Ingo Molnar
git:// into core/rcu Pull RCU updates from Paul E. McKenney: - Removal of spin_unlock_wait() - SRCU updates - Torture-test updates - Documentation updates - Miscellaneous fixes - CPU-hotplug fixes - Miscellaneous non-RCU fixes Signed-off-by: Ingo Molnar <>
2017-08-17arch: Remove spin_unlock_wait() arch-specific definitionsPaul E. McKenney
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore removes the underlying arch-specific arch_spin_unlock_wait() for all architectures providing them. Signed-off-by: Paul E. McKenney <> Cc: <> Cc: Peter Zijlstra <> Cc: Alan Stern <> Cc: Andrea Parri <> Cc: Linus Torvalds <> Acked-by: Will Deacon <> Acked-by: Boqun Feng <>
2017-08-10xtensa: Mark _stext and _end as char-arrays, not single char variablesMasami Hiramatsu
Mark _stext and _end as character arrays instead of single character variables, like include/asm-generic/sections.h does. Signed-off-by: Masami Hiramatsu <> Cc: Ananth N Mavinakayanahalli <> Cc: Anil S Keshavamurthy <> Cc: Chris Zankel <> Cc: David S . Miller <> Cc: Francis Deslauriers <> Cc: Jesper Nilsson <> Cc: Linus Torvalds <> Cc: Max Filippov <> Cc: Mikael Starvik <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Yoshinori Sato <> Cc: Cc: Cc: Link: Signed-off-by: Ingo Molnar <>
2017-08-09Merge git:// S. Miller
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <>
2017-08-07Merge tag 'xtensa-20170807' of git:// Torvalds
Pull Xtensa fixes from Max Filippov: - use asm-generic instances of asm/param.h and asm/device.h instead of exact copies in arch/xtensa/include/asm; - fix build error for xtensa cores with aliasing WT cache: define cache flushing functions and copy_{to,from}_user_page; - add missing EXPORT_SYMBOLs for clear_user_highpage, copy_user_highpage, flush_dcache_page, local_flush_cache_range, local_flush_cache_page, csum_partial and csum_partial_copy_generic. * tag 'xtensa-20170807' of git:// xtensa: mm/cache: add missing EXPORT_SYMBOLs xtensa: don't limit csum_partial export by CONFIG_NET xtensa: fix cache aliasing handling code for WT cache xtensa: remove wrapper header for asm/param.h xtensa: remove wrapper header for asm/device.h
2017-08-03sock: add SOCK_ZEROCOPY sockoptWillem de Bruijn
The send call ignores unknown flags. Legacy applications may already unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a socket opts in to zerocopy. Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing. Processes can also query this socket option to detect kernel support for the feature. Older kernels will return ENOPROTOOPT. Signed-off-by: Willem de Bruijn <> Signed-off-by: David S. Miller <>
2017-08-01xtensa: mm/cache: add missing EXPORT_SYMBOLsMax Filippov
Functions clear_user_highpage, copy_user_highpage, flush_dcache_page, local_flush_cache_range and local_flush_cache_page may be used from modules. Export them. Cc: Signed-off-by: Max Filippov <>
2017-08-01xtensa: don't limit csum_partial export by CONFIG_NETMax Filippov
csum_partial and csum_partial_copy_generic are defined unconditionally and are available even when CONFIG_NET is disabled. They are used not only by the network drivers, but also by scsi and media. Don't limit these functions export by CONFIG_NET. Cc: Signed-off-by: Max Filippov <>
2017-07-28xtensa: fix cache aliasing handling code for WT cacheMax Filippov
Currently building kernel for xtensa core with aliasing WT cache fails with the following messages: mm/memory.c:2152: undefined reference to `flush_dcache_page' mm/memory.c:2332: undefined reference to `local_flush_cache_page' mm/memory.c:1919: undefined reference to `local_flush_cache_range' mm/memory.c:4179: undefined reference to `copy_to_user_page' mm/memory.c:4183: undefined reference to `copy_from_user_page' This happens because implementation of these functions is only compiled when data cache is WB, which looks wrong: even when data cache doesn't need flushing it still needs invalidation. The functions like __flush_[invalidate_]dcache_* are correctly defined for both WB and WT caches (and even if they weren't that'd still be ok, just slower). Fix this by providing the same implementation of the above functions for both WB and WT cache. Cc: Signed-off-by: Max Filippov <>
2017-07-21xtensa: remove wrapper header for asm/param.hTobias Klauser
xtensa's asm/device.h is a verbatim copy of asm-generic/device.h and does not add any arch specific extensions. Thus, use the asm-generic header directly. Signed-off-by: Tobias Klauser <> Signed-off-by: Max Filippov <>
2017-07-21xtensa: remove wrapper header for asm/device.hTobias Klauser
xtensa's asm/device.h is a verbatim copy of asm-generic/device.h and does not add any arch specific extensions. Thus, use the asm-generic header directly. Acked-by: Max Filippov <> Signed-off-by: Tobias Klauser <> Signed-off-by: Max Filippov <>
2017-07-17tty: Fix TIOCGPTPEER ioctl definitionGleb Fotengauer-Malinovskiy
This ioctl does nothing to justify an _IOC_READ or _IOC_WRITE flag because it doesn't copy anything from/to userspace to access the argument. Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Signed-off-by: Gleb Fotengauer-Malinovskiy <> Acked-by: Aleksa Sarai <> Acked-by: Arnd Bergmann <> Signed-off-by: Greg Kroah-Hartman <>
2017-07-15Merge branch 'work.uaccess-unaligned' of ↵Linus Torvalds
git:// Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git:// kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
2017-07-14xtensa: use generic fb.hTobias Klauser
The arch uses a verbatim copy of the asm-generic version and does not add any own implementations to the header, so use asm-generic/fb.h instead of duplicating code. Link: Signed-off-by: Tobias Klauser <> Acked-by: Max Filippov <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2017-07-11xtensa: move generic-y of exported headers to uapi/asm/KbuildMasahiro Yamada
Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), all (and only) headers under uapi directories are exported, but asm-generic wrappers are still exceptions. To complete de-coupling the uapi from kernel headers, move generic-y of exported headers to uapi/asm/Kbuild. With this change, "make headers_install" will just need to parse uapi/asm/Kbuild to build up exported headers. Also, move "generic-y += kprobes.h" up in order to keep the entries sorted. Signed-off-by: Masahiro Yamada <>
2017-07-06Merge branch 'uaccess.strlen' of ↵Linus Torvalds
git:// Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git:// s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
2017-07-06Merge tag 'dma-mapping-4.13' of git:// Torvalds
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git:// (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...