summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-11-04parisc: Avoid spurious inequivalent alias kernel error messagesJohn David Anglin
This patch changes flush_dcache_page() to only print inequivalent alias error messages on systems that require coherency. Inequivalent aliases can occur on systems that don't require coherency and this can cause spurious messages. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-11-04arm64: defconfig: Change CONFIG_AT803X_PHY from m to yPeng Fan
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy will be reset. Without CONFIG_AT803X_PHY as y, board will stop booting in NFS DHCP, because phy is not ready. So mark CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: zii-ultra: fix ARM regulator GPIO handleLucas Stach
The GPIO handle is referencing the wrong GPIO, so the voltage did not actually change as intended. The pinmux is already correct, so just correct the GPIO number. Fixes: 4a13b3bec3b4 (arm64: dts: imx: add Zii Ultra board support) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03arm64: dts: qcom: db845c: Enable LVS 1 and 2Bjorn Andersson
vreg_lvs1a_1p8 and vreg_lvs2a_1p8 are both feeding pins in the low speed connectors and should as such alway be on, so enable them. Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-04ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock sourceAnson Huang
i.MX7ULP does NOT support runtime switching clock source for PCC, APLL_PFD1 by default is usdhc's clock source, so just use it in kernel to avoid below kernel dump during kernel boot up and make sure kernel can boot up with SD root file-system. [ 3.035892] Loading compiled-in X.509 certificates [ 3.136301] sdhci-esdhc-imx 40370000.mmc: Got CD GPIO [ 3.242886] mmc0: Reset 0x1 never completed. [ 3.247190] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 3.253751] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000002 [ 3.260218] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 3.266775] mmc0: sdhci: Argument: 0x00009a64 | Trn mode: 0x00000000 [ 3.273333] mmc0: sdhci: Present: 0x00088088 | Host ctl: 0x00000002 [ 3.279794] mmc0: sdhci: Power: 0x00000000 | Blk gap: 0x00000080 [ 3.286350] mmc0: sdhci: Wake-up: 0x00000008 | Clock: 0x0000007f [ 3.292901] mmc0: sdhci: Timeout: 0x0000008c | Int stat: 0x00000000 [ 3.299364] mmc0: sdhci: Int enab: 0x007f010b | Sig enab: 0x00000000 [ 3.305918] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402 [ 3.312471] mmc0: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b400 [ 3.318934] mmc0: sdhci: Cmd: 0x0000113a | Max curr: 0x00ffffff [ 3.325488] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x0039b37f [ 3.332040] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00 [ 3.338501] mmc0: sdhci: Host ctl2: 0x00000000 [ 3.343051] mmc0: sdhci: ============================================ Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx: add devicetree for Kobo Clara HDAndreas Kemnade
This adds a devicetree for the Kobo Clara HD Ebook reader. It is on based on boards called "e60k02". It is equipped with an imx6sll SoC. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: add Netronix E60K02 board common fileAndreas Kemnade
The Netronix board E60K02 can be found some several Ebook-Readers, at least the Kobo Clara HD and the Tolino Shine 3. The board is equipped with different SoCs requiring different pinmuxes. For now the following peripherals are included: - LED - Power Key - Cover (gpio via hall sensor) - RC5T619 PMIC (the kernel misses support for rtc and charger subdevices). - Backlight via lm3630a - Wifi sdio chip detection (mmc-powerseq and stuff) It is based on vendor kernel but heavily reworked due to many changed bindings. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'mvebu-dt64-5.5-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt64 for 5.5 (part 1) - Add new Marvell CN9130 SoC support (CN9130 is made of one AP807 and one internal CP115, similar to the Armada 7K/8K using AP806 and CP110). - Reorganize EspressoBin device tree to add new variant of the boards (Armada 3270 based) - Add firmware node for turris Mox (Armada 3720 based) * tag 'mvebu-dt64-5.5-1' of git://git.infradead.org/linux-mvebu: (23 commits) arm64: dts: armada-3720-turris-mox: add firmware node arm64: dts: marvell: add ESPRESSObin variants arm64: dts: marvell: Add support for Marvell CN9132-DB arm64: dts: marvell: Add support for Marvell CN9131-DB arm64: dts: marvell: Add support for Marvell CN9130-DB arm64: dts: marvell: Add support for Marvell CN9130 SoC support arm64: dts: marvell: Add support for CP115 arm64: dts: marvell: Externalize PCIe macros from CP11x file arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file arm64: dts: marvell: Prepare the introduction of CP115 arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment arm64: dts: marvell: Add AP807-quad cache description arm64: dts: marvell: Add AP806-quad cache description arm64: dts: marvell: Add AP806-dual cache description arm64: dts: marvell: Add support for AP807/AP807-quad dt-bindings: marvell: Declare the CN913x SoC compatibles dt-bindings: marvell: Convert the SoC compatibles description to YAML arm64: dts: marvell: Move clocks to AP806 specific file arm64: dts: marvell: Prepare the introduction of AP807 based SoCs MAINTAINERS: Add new Marvell CN9130-based files to track ... Link: https://lore.kernel.org/r/87zhhc3bo6.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'mvebu-dt-5.5-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt for 5.5 (part 1) - Enable L2 cache parity and ECC on a Armada XP SoC family and allow to use in on the Armada 38x SoCs too. - Use correct name for the rs5c372a on synology (Kirkwood based) - Rename "sa-sram" node to "sram" on dove * tag 'mvebu-dt-5.5-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-xp: add label to sdram-controller node ARM: dts: mvebu: add sdram controller node to Armada-38x ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg ARM: dts: dove: Rename "sa-sram" node to "sram" ARM: dts: kirkwood: synology: Fix rs5c372 RTC entry Link: https://lore.kernel.org/r/8736f44q9l.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'tegra-for-5.5-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.5-rc1 Adds support for DP and XUSB on various boards, enables SMMU support for more devices and fixes a couple of DTC warnings and inconsistencies that are reported at runtime. These changes along with some of the driver changes in other branches allow suspend/resume support on Tegra210 devices (e.g. Jetson TX1 and Jetson Nano). * tag 'tegra-for-5.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) arm64: tegra: Add Jetson Nano SC7 timings arm64: tegra: Add Jetson TX1 SC7 timings arm64: tegra: Enable wake from deep sleep on RTC alarm arm64: tegra: Add PMU on Tegra210 arm64: tegra: Add blank lines for better readability arm64: tegra: Enable DisplayPort on Jetson AGX Xavier arm64: tegra: p2888: Rename regulators for consistency arm64: tegra: Enable DP support on Jetson TX2 arm64: tegra: Fix compatible for SOR1 arm64: tegra: Enable DP support on Jetson Nano arm64: tegra: Add SOR0_OUT clock on Tegra210 arm64: tegra: Assume no CLKREQ presence by default arm64: tegra: Enable SMMU for VIC on Tegra186 arm64: tegra: Enable XUSB host controller on Jetson TX2 arm64: tegra: Enable SMMU for XUSB host on Tegra186 arm64: tegra: Enable XUSB pad controller on Jetson TX2 arm64: tegra: Add ethernet alias on Jetson AGX Xavier arm64: tegra: Fix compatible string for EQOS on Tegra194 arm64: tegra: Hook up edp interrupt on Tegra210 SOCTHERM arm64: tegra: Fix base address for SOR1 on Tegra194 ... Link: https://lore.kernel.org/r/20191102144521.3863321-8-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'tegra-for-5.5-arm-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig ARM: tegra: Default configuration changes for v5.5-rc1 Enables the Tegra VDE driver by default. This is currently in staging but can be used with existing userspace to do hardware-accelerated video decoding of H.264 streams. * tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable Tegra VDE driver in tegra_defconfig Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04arm64: dts: freescale: add initial support for colibri imx8xMarcel Ziswiler
This patch adds the device tree to support Toradex Colibri iMX8X a computer on module which can be used on different carrier boards. The module consists of an NXP i.MX 8X family SoC (either i.MX 8DualX or 8QuadXPlus), a PF8100 PMIC, a FastEthernet PHY, 1 or 2 GB of LPDDR4 RAM, some level shifters, a Micron eMMC, a USB hub, an AD7879 resistive touch controller, an SGTL5000 audio codec and on-module CSI as well as DSI-LVDS FFC receptacles plus an optional Bluetooth/Wi-Fi module. Anything that is not self-contained on the module is disabled by default. The device tree for the Colibri Evaluation Board includes the module's device tree and enables the supported peripherals of the carrier board (the Colibri Evaluation Board supports almost all of them). So far there is no display or USB functionality supported at all but basic console UART, eMMC and Ethernet functionality work fine. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'tegra-for-5.5-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.5-rc1 Adds support for CPU frequency scaling on Tegra20 and Tegra30, EMC frequency scaling on Tegra30, SMMU support for VDE on Tegra30, the STMPE ADC found on Toradex T30 modules as well as fixes for eDP support on Venice2. * tag 'tegra-for-5.5-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cardhu-a04: Add CPU Operating Performance Points ARM: tegra: cardhu-a04: Set up voltage regulators for DVFS ARM: tegra: trimslice: Add CPU Operating Performance Points ARM: tegra: paz00: Add CPU Operating Performance Points ARM: tegra: paz00: Set up voltage regulators for DVFS ARM: tegra: Add CPU Operating Performance Points for Tegra30 ARM: tegra: Add CPU Operating Performance Points for Tegra20 ARM: tegra: Add Tegra30 CPU clock ARM: tegra: Add Tegra20 CPU clock ARM: tegra: Add External Memory Controller node on Tegra30 ARM: tegra: nyan-big: Add timings for RAM codes 4 and 6 ARM: tegra: Connect SMMU with Video Decoder Engine on Tegra30 ARM: tegra: Add eDP power supplies on Venice2 ARM: tegra: Add SOR0_OUT clock on Tegra124 ARM: tegra: Add stmpe-adc DT node to Toradex T30 modules Link: https://lore.kernel.org/r/20191102144521.3863321-6-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04ARM: dts: vf-colibri: fix typo in top-level module compatibleMarcel Ziswiler
Fix typo in top-level module compatible. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'tegra-for-5.5-arm-core' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.5-rc1 Contains two fixes for CPU idle and suspend/resume on early Tegra SoCs. * tag 'tegra-for-5.5-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() Link: https://lore.kernel.org/r/20191102144521.3863321-5-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'sunxi-config64-for-5.5-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig One new patch to the arm64 defconfig to enable the new crypto engine driver. * tag 'sunxi-config64-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: add new Allwinner crypto options Link: https://lore.kernel.org/r/539241d6-9b2e-4d5b-bd63-f912cf6ebf96.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'sunxi-config-for-5.5-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig Two new drivers enabled in sunxi_defconfig: one for the PHY found on multiple boards, one for the new crypto driver. * tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: configs: sunxi: Enable MICREL_PHY ARM: configs: sunxi: add new Allwinner crypto options Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'sunxi-dt-for-5.5-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of DT patches, with this time mostly: - Mali GPU support for the H6 - Two new crypto drivers enablement - A few fixes to our DTs, fixed through the validation effort - New boards: NanoPi Duo2 * tag 'sunxi-dt-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits) dt-bindings: arm: sunxi: add FriendlyARM NanoPi Duo2 ARM: dts: sun8i: add FriendlyARM NanoPi Duo2 arm64: allwinner: h6: Enable GPU node for Tanix TX6 arm64: dts: allwinner: bluetooth for Emlid Neutis N5 ARM: dts: sunxi: h3/h5: add missing uart2 rts/cts pins ARM: dts: sun9i: a80: Add Security System node ARM: dts: sun8i: a83t: Add Security System node arm64: dts: allwinner: sun50i: Add Crypto Engine node on H6 arm64: dts: allwinner: sun50i: Add crypto engine node on H5 arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64 ARM: dts: sun8i: H3: Add Crypto Engine node ARM: dts: sun8i: R40: add crypto engine node dt-bindings: crypto: Add DT bindings documentation for sun8i-ce Crypto Engine arm64: dts: allwinner: Add mali GPU supply for H6 boards arm64: dts: allwinner: Add ARM Mali GPU node for H6 ARM: dts: sun8i: a83t: a711: Add touchscreen node ARM: dts: sun5i: olinuxino micro: Fix AT24 node name ARM: dts: sun9i: Add missing watchdog clocks arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth ... Link: https://lore.kernel.org/r/1bf18c83-f41d-4353-9ca2-9585b8693df2.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: atlas7: Fix "debounce-interval" property misspellingGeert Uytterhoeven
"debounce_interval" was never supported. Link: https://lore.kernel.org/r/20191101160356.32034-3-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03arm64: dts: lg1313: DT fix s/#interrupts-cells/#interrupt-cells/Geert Uytterhoeven
The standard DT property is called "#interrupt-cells". Link: https://lore.kernel.org/r/20191101160356.32034-2-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03arm64: dts: lg1312: DT fix s/#interrupts-cells/#interrupt-cells/Geert Uytterhoeven
The standard DT property is called "#interrupt-cells". Link: https://lore.kernel.org/r/20191101160356.32034-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm64-dt-for-v5.5-tag2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.5 (take two) - Video-Input and Serial-ATA support on RZ/G2N, - Color Management Module support on various R-Car Gen3 SoCs, - Initial support for the R-Car M3-W+ (r8a77961) SoC on the Salvator-XS board. * tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+ arm64: dts: renesas: Add Renesas R8A77961 SoC support arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960 dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions arm64: dts: renesas: r8a774b1: Add SATA controller node arm64: dts: renesas: rcar-gen3: Add CMM units arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support Link: https://lore.kernel.org/r/20191101155842.31467-5-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm64-defconfig-for-v5.5-tag2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM64 defconfig updates for v5.5 (take two) - Enable support for the new R-Car M3-W+ (r8a77961) SoC. * tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable R8A77961 SoC Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm-soc-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas ARM SoC updates for v5.5 - Drop legacy DT clock support on R-Car Gen2. * tag 'renesas-arm-soc-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: rcar-gen2: Drop legacy DT clock support Link: https://lore.kernel.org/r/20191101155842.31467-3-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.5 - Refresh shmobile_defconfig for v5.4-rc1. * tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Refresh for v5.4-rc1 Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'omap-for-v5.5/prm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt PRM reset control dts changes for v5.5 merge window This series of changes adds the PRM reset driver nodes for am3/4, omap4/5 and dra7 SoCs. The reset driver changes make it easier to add support for various accelerators for TI SoCs in a more generic way. Note that this branch is based on the PRM reset driver changes branch. * tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add PRM data ARM: dts: am43xx: Add PRM data ARM: dts: am33xx: Add PRM data ARM: dts: omap4: add PRM nodes ARM: dts: dra7: add PRM nodes soc: ti: omap-prm: add omap5 PRM data soc: ti: omap-prm: add am4 PRM data soc: ti: omap-prm: add dra7 PRM data soc: ti: omap-prm: add data for am33xx soc: ti: omap-prm: add omap4 PRM data soc: ti: omap-prm: add support for denying idle for reset clockdomain soc: ti: omap-prm: poll for reset complete during de-assert soc: ti: add initial PRM driver with reset control support dt-bindings: omap: add new binding for PRM instances Link: https://lore.kernel.org/r/pull-1572623173-281197@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3-dell-ariel: Add a serial point aliasLubomir Rintel
Make sure UART3, where the console is, is called ttyS2. That is consistent with the early console. Link: https://lore.kernel.org/r/20191031163455.1711872-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3-dell-ariel: Add a name to /memory nodeLubomir Rintel
Ponted out by DTC: <stdout>: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Link: https://lore.kernel.org/r/20191031163455.1711872-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3: Fix /soc/watchdog node nameLubomir Rintel
There's a typo there that rightfully upsets DTS: <stdout>: Warning (simple_bus_reg): /soc/watchdog@2c000620: simple-bus unit address format error, expected "e0000620" Link: https://lore.kernel.org/r/20191031163455.1711872-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3: Add a name to /clocks nodeLubomir Rintel
It should have one and DTC is indeed unhappy about its absence: <stdout>: Warning (unit_address_vs_reg): /soc/clocks: node has a reg or ranges property, but no unit name Link: https://lore.kernel.org/r/20191031163455.1711872-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEEDTao Ren
Increase the max number of GPIOs from default 512 to 1024 for ASPEED platforms, because Facebook Yamp (AST2500) BMC platform has total 594 GPIO pins (232 provided by ASPEED SoC, and 362 by I/O Expanders). Link: https://lore.kernel.org/r/20191031014040.12898-1-rentao.bupt@gmail.com Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: Add RDA8810PL GPIO controllersManivannan Sadhasivam
Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers in this SoC with maximum of 32 gpios. Except GPIOC, all controllers are capable of generating edge/level interrupts from first 8 lines. Link: https://lore.kernel.org/r/20191030101154.6312-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'hisi-arm64-defconfig-for-5.5' of ↵Olof Johansson
git://github.com/hisilicon/linux-hisi into arm/defconfig ARM64: hisilicon: defconfig updates for 5.5 - enable ARM SMMUv3 PMU and hisi ZIP controller as module for Kunpeng920 SoC * tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable SMMU v3 PMCG arm64: defconfig: Enable HiSilicon ZIP controller Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'hisi-arm64-dt-for-5.5' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.5 - add Mali450 MP4 GPU node in the hi6220 SoC * tag 'hisi-arm64-dt-for-5.5' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: Add Mali-450 MP4 GPU DT entry Link: https://lore.kernel.org/r/5DB95AAB.8060405@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/soc ARM: mach-hisi: Hisilicon SoC updates for 5.5 - drop the ARCH_MULTI_V7 dependency in the sub-menu of ARCH_HISI since ARCH_HISI depends on ARCH_MULTI_V7 * tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi: ARM: hisi: drop useless depend on ARCH_MULTI_V7 Link: https://lore.kernel.org/r/5DB9593D.9050904@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'realtek-arm64-dt-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek ARM64 based SoC DT for v5.5 Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs. Add reset controllers for RTD129x and start using them for UARTs. * tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: dts: realtek: Add RTD129x UART resets arm64: dts: realtek: Add RTD129x reset controller nodes dt-bindings: reset: Add Realtek RTD1295 arm64: dts: realtek: Add watchdog node for RTD129x arm64: dts: realtek: Add oscillator for RTD129x arm64: dts: realtek: Add RTD1296 and Synology DS418 dt-bindings: arm: realtek: Document RTD1296 and Synology DS418 arm64: dts: realtek: Add RTD1293 and Synology DS418j arm64: dts: realtek: Change dual-license from MIT to BSD dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j dt-bindings: arm: realtek: Tidy up conversion to json-schema Link: https://lore.kernel.org/r/20191030041000.31848-2-afaerber@suse.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'realtek-arm64-soc-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/soc Realtek ARM64 based SoC for v5.5 Enable reset controllers and add a mailing list to MAINTAINERS. * tag 'realtek-arm64-soc-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: realtek: Select reset controller MAINTAINERS: Add mailing list for Realtek SoCs Link: https://lore.kernel.org/r/20191030041000.31848-1-afaerber@suse.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge branch 'for_5.5/keystone-dts' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt * 'for_5.5/keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: configs: keystone: enable cpts ARM: dts: k2l-netcp: add cpts refclk_mux node ARM: dts: k2hk-netcp: add cpts refclk_mux node ARM: dts: k2e-netcp: add cpts refclk_mux node ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b ARM: dts: keystone-clocks: add input fixed clocks Link: https://lore.kernel.org/r/1572372856-20598-2-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge branch 'for_5.5/driver-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers * 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs' soc: ti: omap-prm: fix return value check in omap_prm_probe() soc: ti: omap-prm: add omap5 PRM data soc: ti: omap-prm: add am4 PRM data soc: ti: omap-prm: add dra7 PRM data soc: ti: omap-prm: add data for am33xx soc: ti: omap-prm: add omap4 PRM data soc: ti: omap-prm: add support for denying idle for reset clockdomain soc: ti: omap-prm: poll for reset complete during de-assert soc: ti: add initial PRM driver with reset control support dt-bindings: omap: add new binding for PRM instances Link: https://lore.kernel.org/r/1572372856-20598-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04arm64: dts: ls1028a: Fix tmu unit addressFabio Estevam
The following build warning is seen with W=1: arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:531.20-581.5: Warning (simple_bus_reg): /soc/tmu@1f00000: simple-bus unit address format error, expected "1f80000" Fix it by adjusting the tmu unit address to match its reg entry. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: ls1028a: Move thermal-zone out of SoCFabio Estevam
Move thermal-zone node from the soc node to the root node. thermal-zone node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:583.17-612.5: Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cellsFabio Estevam
The following build warning is seen with W=1: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts:196.10-208.4: Warning (avoid_unnecessary_addr_size): /soc/i2c@2000000/fpga@66: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fix it by removing the unnecessary #address-cells/#size-cells. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: imx8mn: Remove duplicated machine compatibleAnson Huang
Machine compatible string normally is located in board DT, remove the duplicated one from SoC dtsi. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: imx8mm: Remove duplicated machine compatibleAnson Huang
Machine compatible string normally is located in board DT, remove the duplicated one from SoC dtsi. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: imx8mq-evk: Add remote controlRogerio Pimentel da Silva
Add remote control to i.MX8M EVK device tree. The rc protocol must be selected by writing to: /sys/devices/platform/ir-receiver/rc/rc0/protocols On my tests, I used "nec" rc protocol: echo nec > protocols Tested using evetest: evtest /dev/input/event0 Output log for each key pressed: Event: time 1568122608.267845, -------------- SYN_REPORT ------------ Event: time 1568122610.503835, type 4 (EV_MSC), code 4 (MSC_SCAN), value 440 Signed-off-by: Rogerio Pimentel da Silva <rpimentel.silva@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: imx: use generic function to exit coherencyStefan Agner
The common ARM architecture code provides a generic function to exit coherency called v7_exit_coherency_flush(). Replace the machine specific implementation using the generic function. Tested on a i.MX 6Dual by hotplugging the secondary CPU under load through sysfs several 1000 times. Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'sh-pfc-for-v5.5-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.5 (take two) - Add support for the new R-Car M3-W+ (r8a77961) SoC, - Small fixes and cleanups.
2019-11-03x86/resctrl: Prevent NULL pointer dereference when reading mondataXiaochen Shen
When a mon group is being deleted, rdtgrp->flags is set to RDT_DELETED in rdtgroup_rmdir_mon() firstly. The structure of rdtgrp will be freed until rdtgrp->waitcount is dropped to 0 in rdtgroup_kn_unlock() later. During the window of deleting a mon group, if an application calls rdtgroup_mondata_show() to read mondata under this mon group, 'rdtgrp' returned from rdtgroup_kn_lock_live() is a NULL pointer when rdtgrp->flags is RDT_DELETED. And then 'rdtgrp' is passed in this path: rdtgroup_mondata_show() --> mon_event_read() --> mon_event_count(). Thus it results in NULL pointer dereference in mon_event_count(). Check 'rdtgrp' in rdtgroup_mondata_show(), and return -ENOENT immediately when reading mondata during the window of deleting a mon group. Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1572326702-27577-1-git-send-email-xiaochen.shen@intel.com
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-11-02 The following pull-request contains BPF updates for your *net-next* tree. We've added 30 non-merge commits during the last 7 day(s) which contain a total of 41 files changed, 1864 insertions(+), 474 deletions(-). The main changes are: 1) Fix long standing user vs kernel access issue by introducing bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel. 2) Accelerated xskmap lookup, from Björn and Maciej. 3) Support for automatic map pinning in libbpf, from Toke. 4) Cleanup of BTF-enabled raw tracepoints, from Alexei. 5) Various fixes to libbpf and selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 10:44:13 +0000