summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-10-21ARM: dts: aspeed: rainier: Enable earlyconJoel Stanley
Rainier was missed when enabling all of the other machines in commit 239566b032f3 ("ARM: dts: aspeed: Set earlycon boot argument"). Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add front panel LEDsJoel Stanley
These were meant to be part of commit 4fb27b3f9176 ("ARM: dts: aspeed: rainier: Add system LEDs") but went missing. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6Isaac Kurth
The state of this GPIO determines whether a factory reset has been requested. If a physical switch is used, it can be high or low. During boot, the software checks and records the state of this switch. If it is different than the previous recorded state, then the read-write portions of memory are reformatted. Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove PSU gpio-keysB. J. Wyman
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7Eddie James
Only the pass 1 Ingraham board (Rainier system) had a micro-controller wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the heartbeat LED, so remove the hog as this device tree supports pass 2. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add eeprom on bus 12Eddie James
The devicetree was missing an eeprom. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Enable KCS channel 2Andrew Jeffery
Rainier uses KCS channel 2 as the source for the debug-trigger application outlined at [1] and implemented at [2]. [1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md [2] https://github.com/openbmc/debug-trigger Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP bindingAndrew Jeffery
The MCTP LPC driver was loaded by hacking up the compatible in the devicetree node for KCS 4. With the introduction of the raw KCS driver this hack is no-longer required. Use the regular compatible string for KCS 4 and configure the appropriate SerIRQ. The reset state of the status bits on KCS 4 is inappropriate for the MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: Adding Inventec Transformers BMCLin.TommySC 林世欽 TAO
Initial introduction of Inventec Transformers x86 family equipped with AST2600 BMC SoC. Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/7d7b20575f994a3c9018223a3c5f198d@inventec.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Fix bus 15 muxed eepromsEddie James
The eeproms on bus 15 muxes were at the wrong addresses. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add IBM Operation Panel I2C deviceEddie James
Set I2C bus 14 to multi-master mode and add the panel device that will register the I2C controller as a slave device. In addition, in early Everest systems, the panel device was behind an I2C switch, which doesn't work for slave mode. Get it working (albeit unreliably, since a master transaction might switch the switch at any moment) by defaulting the switch channel to the one with the panel. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add I2C switch on bus 8Eddie James
The switch controls two busses containing some VRMs. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier and everest: Remove PCA gpio specificationEddie James
Specifying gpio nodes under PCA led controllers no longer does anything, so remove those nodes in the device trees. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node nameEddie James
In keeping with previous systems, call the iio-hwmon bridge node "iio-hwmon-battery" to distinguish it as the battery voltage sensor. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-14ARM: dts: aspeed: fp5280g2: Use the 64M layoutJohn Wang
Use the 64M layout since the flash on the board is 64M Signed-off-by: John Wang <wangzhiqiang02@inspur.com> Link: https://lore.kernel.org/r/20211014072743.939293-1-wangzhiqiang02@inspur.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-12ARM: dts: aspeed: Add TYAN S7106 BMC machineOskar Senft
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC. Signed-off-by: Oskar Senft <osk@google.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210909004920.1634322-1-osk@google.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-12ARM: dts: aspeed: rainier: Add power-config-full-load gpioAdriana Kobylak
Add the power-config-full-load described in: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load The power-config-full-load gpio is designed to be used to specify how many power supplies the system should have, in rainier it is 2 or 4. If enough power supplies fail so that the system no longer has redundancy (no longer n+1), the hardware will signal to the Onboard Chip Controller that the system may be oversubscribed, and performance may need to be reduced so the system can maintain it's powered on state. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211005192226.213539-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-08ARM: dts: aspeed: p10bmc: Define secure boot gpioJoel Stanley
Input pin that indicates that the BMC is configured to boot with security protections enforced. Pulled up by default (secure). Placing the jumper will pull the pin down (bypass security). When in the secure boot state, it makes the EEPROM at 0x50 on bus 14 read only. Link: https://lore.kernel.org/r/20210923074606.283393-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-08ARM: dts: aspeed: mtjade: Add some gpiosQuan Nguyen
Add S0_SCP_AUTH_FAIL, S1_SCP_AUTH_FAIL gpios to indicates firmware authentication fail on each socket. Add gpio RTC_BAT_SEN_EN to enable RTC battery adc sensor. Add BMC_I2C4_O_EN gpio to go high at boot to enable access to I2C4 bus. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Thang Nguyen <thang@os.amperecomputing.com> Link: https://lore.kernel.org/r/20210917082945.19111-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and EverestEddie James
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and Everest systems and add an iio-hwmon node for the 7th channel to report the battery voltage. Tested on Rainier: ~# cat /sys/class/hwmon/hwmon11/in1_input 1347 Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line B6Ben Tyner
gpio-line-names B6 set to checkstop Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-4-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line Q2Ben Tyner
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-3-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: rainier: Define name for gpio line Q2Ben Tyner
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-2-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6Isaac Kurth
The state of this GPIO determines whether a factory reset has been requested. If a physical switch is used, it can be high or low. During boot, the software checks and records the state of this switch. If it is different than the previous recorded state, then the read-write portions of memory are reformatted. Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com> Link: https://lore.kernel.org/r/20210901185236.558771-1-isaac.kurth@ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: aspeed: everest: Add I2C bus 15 muxesEddie James
Add the muxes that are attached on I2C bus 15. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210903214836.48286-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: aspeed: rainier: Add system LEDsEddie James
Add all the missing system LEDs. These are all connected by GPIO expanders. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210903214836.48286-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROMKonstantin Aladyshev
AMD EthanolX CRB uses 24LC128 EEPROM chip to store its FRU information. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20210909132053.3919-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: fp5280g2: Enable KCS 3 for MCTP bindingGeorge Liu
Signed-off-by: George Liu <liuxiwei@inspur.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210819055227.140980-1-liuxiwei@inspur.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-12Merge tag 'smp-urgent-2021-09-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
2021-09-11Merge tag 'riscv-for-linus-5.15-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
2021-09-10riscv: Move EXCEPTION_TABLE to RO_DATA segmentJisheng Zhang
_ex_table section is read-only, so move it to RO_DATA. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: Enable BUILDTIME_TABLE_SORTJisheng Zhang
Enable BUILDTIME_TABLE_SORT to sort the exception table at build time rather than during boot. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: dts: microchip: mpfs-icicle: Fix serial consoleGeert Uytterhoeven
Currently, nothing is output on the serial console, unless "console=ttyS0,115200n8" or "earlycon" are appended to the kernel command line. Enable automatic console selection using chosen/stdout-path by adding a proper alias, and configure the expected serial rate. While at it, add aliases for the other three serial ports, which are provided on the same micro-USB connector as the first one. Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: move the (z)install rules to arch/riscv/MakefileMasahiro Yamada
Currently, the (z)install targets in arch/riscv/Makefile descend into arch/riscv/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/riscv/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: Improve stack randomisation on RV64Kefeng Wang
This enlarges the bits availiable for stack randomisation on RV64 from the default of 8MiB to 1GiB, to match arm64 and x86. Also, update the documentation to reflect our support for stack randomisation. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [Palmer: commit text] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1Heinrich Schuchardt
The EFI system partition uses the FAT file system. Many distributions add an entry in /etc/fstab for the ESP. We must ensure that mounting does not fail. The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE). The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1). So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: defconfig: enable BLK_DEV_NVMEHeinrich Schuchardt
NVMe is a non-volatile storage media attached via PCIe. As NVMe has much higher throughput than other block devices like SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME. The HiFive Unmatched is a board providing M.2 slots for NVMe drives. Enable CONFIG_PCIE_FU740. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-11Merge branch 'linus' into smp/urgentThomas Gleixner
Ensure that all usage sites of get/put_online_cpus() except for the struggler in drivers/thermal are gone. So the last user and the deprecated inlines can be removed.
2021-09-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Limit the linear region to 51-bit when KVM is running in nVHE mode. Otherwise, depending on the placement of the ID map, kernel-VA to hyp-VA translations may produce addresses that either conflict with other HYP mappings or generate addresses outside of the 52-bit addressable range. - Instruct kmemleak not to scan the memory reserved for kdump as this range is removed from the kernel linear map and therefore not accessible. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kdump: Skip kmemleak scan reserved memory for kdump arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
2021-09-10Merge tag 'for-5.15/parisc-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Build warning fixes in Makefile and Dino PCI driver - Fix when sched_clock is marked unstable - Drop strnlen_user() in favour of generic version - Prevent kernel to write outside userspace signal stack - Remove CONFIG_SET_FS including KERNEL_DS and USER_DS from parisc and switch to __get/put_kernel_nofault() * tag 'for-5.15/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement __get/put_kernel_nofault() parisc: Mark sched_clock unstable only if clocks are not syncronized parisc: Move pci_dev_is_behind_card_dino to where it is used parisc: Reduce sigreturn trampoline to 3 instructions parisc: Check user signal stack trampoline is inside TASK_SIZE parisc: Drop useless debug info and comments from signal.c parisc: Drop strnlen_user() in favour of generic version parisc: Add missing FORCE prerequisite in Makefile
2021-09-10arm64: kdump: Skip kmemleak scan reserved memory for kdumpChen Wandun
Trying to boot with kdump + kmemleak, command will result in a crash: "echo scan > /sys/kernel/debug/kmemleak" crashkernel reserved: 0x0000000007c00000 - 0x0000000027c00000 (512 MB) Kernel command line: BOOT_IMAGE=(hd1,gpt2)/vmlinuz-5.14.0-rc5-next-20210809+ root=/dev/mapper/ao-root ro rd.lvm.lv=ao/root rd.lvm.lv=ao/swap crashkernel=512M Unable to handle kernel paging request at virtual address ffff000007c00000 Mem abort info: ESR = 0x96000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 64k pages, 48-bit VAs, pgdp=00002024f0d80000 [ffff000007c00000] pgd=1800205ffffd0003, p4d=1800205ffffd0003, pud=1800205ffffd0003, pmd=1800205ffffc0003, pte=0068000007c00f06 Internal error: Oops: 96000007 [#1] SMP pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : scan_block+0x98/0x230 lr : scan_block+0x94/0x230 sp : ffff80008d6cfb70 x29: ffff80008d6cfb70 x28: 0000000000000000 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000001 x24: 0000000000000000 x23: ffffa88a6b18b398 x22: ffff000007c00ff9 x21: ffffa88a6ac7fc40 x20: ffffa88a6af6a830 x19: ffff000007c00000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffffffff00000000 x13: ffffffffffffffff x12: 0000000000000020 x11: 0000000000000000 x10: 0000000001080000 x9 : ffffa88a6951c77c x8 : ffffa88a6a893988 x7 : ffff203ff6cfb3c0 x6 : ffffa88a6a52b3c0 x5 : ffff203ff6cfb3c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffff20226cb56a40 x0 : 0000000000000000 Call trace: scan_block+0x98/0x230 scan_gray_list+0x120/0x270 kmemleak_scan+0x3a0/0x648 kmemleak_write+0x3ac/0x4c8 full_proxy_write+0x6c/0xa0 vfs_write+0xc8/0x2b8 ksys_write+0x70/0xf8 __arm64_sys_write+0x24/0x30 invoke_syscall+0x4c/0x110 el0_svc_common+0x9c/0x190 do_el0_svc+0x30/0x98 el0_svc+0x28/0xd8 el0t_64_sync_handler+0x90/0xb8 el0t_64_sync+0x180/0x184 The reserved memory for kdump will be looked up by kmemleak, this area will be set invalid when kdump service is bring up. That will result in crash when kmemleak scan this area. Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210910064844.3827813-1-chenwandun@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-09parisc: Implement __get/put_kernel_nofault()Helge Deller
Remove CONFIG_SET_FS from parisc, so we need to add __get_kernel_nofault() and __put_kernel_nofault(), define HAVE_GET_KERNEL_NOFAULT and remove set_fs(), get_fs(), load_sr2(), thread_info->addr_limit, KERNEL_DS and USER_DS. The nice side-effect of this patch is that we now can directly access userspace via sr3 without the need to use a temporary sr2 which is either copied from sr3 or set to zero (for kernel space). Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Arnd Bergmann <arnd@kernel.org>
2021-09-09Merge tag 'for-linus-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Support for VMAP_STACK - Support for splice_write in hostfs - Fixes for virt-pci - Fixes for virtio_uml - Various fixes * tag 'for-linus-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix stub location calculation um: virt-pci: fix uapi documentation um: enable VMAP_STACK um: virt-pci: don't do DMA from stack hostfs: support splice_write um: virtio_uml: fix memory leak on init failures um: virtio_uml: include linux/virtio-uml.h lib/logic_iomem: fix sparse warnings um: make PCI emulation driver init/exit static
2021-09-09Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM development updates from Russell King: - Rename "mod_init" and "mod_exit" so that initcall debug output is actually useful (Randy Dunlap) - Update maintainers entries for linux-arm-kernel to indicate it is moderated for non-subscribers (Randy Dunlap) - Move install rules to arch/arm/Makefile (Masahiro Yamada) - Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij) - Don't warn about atags_to_fdt() stack size (David Heidelberg) - Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann) - Get rid of set_fs() usage (Arnd Bergmann) - Remove checks for GCC prior to v4.6 (Geert Uytterhoeven) * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9118/1: div64: Remove always-true __div64_const32_is_OK() duplicate ARM: 9117/1: asm-generic: div64: Remove always-true __div64_const32_is_OK() ARM: 9116/1: unified: Remove check for gcc < 4 ARM: 9110/1: oabi-compat: fix oabi epoll sparse warning ARM: 9113/1: uaccess: remove set_fs() implementation ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault ARM: 9111/1: oabi-compat: rework fcntl64() emulation ARM: 9114/1: oabi-compat: rework sys_semtimedop emulation ARM: 9108/1: oabi-compat: rework epoll_wait/epoll_pwait emulation ARM: 9107/1: syscall: always store thread_info->abi_syscall ARM: 9109/1: oabi-compat: add epoll_pwait handler ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs() ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault ARM: 9105/1: atags_to_fdt: don't warn about stack size ARM: 9103/1: Drop ARCH_NR_GPIOS definition ARM: 9102/1: move theinstall rules to arch/arm/Makefile ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated ARM: 9099/1: crypto: rename 'mod_init' & 'mod_exit' functions to be module-specific
2021-09-09Merge tag 's390-5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "Except for the xpram device driver removal it is all about fixes and cleanups. - Fix topology update on cpu hotplug, so notifiers see expected masks. This bug was uncovered with SCHED_CORE support. - Fix stack unwinding so that the correct number of entries are omitted like expected by common code. This fixes KCSAN selftests. - Add kmemleak annotation to stack_alloc to avoid false positive kmemleak warnings. - Avoid layering violation in common I/O code and don't unregister subchannel from child-drivers. - Remove xpram device driver for which no real use case exists since the kernel is 64 bit only. Also all hypervisors got required support removed in the meantime, which means the xpram device driver is dead code. - Fix -ENODEV handling of clp_get_state in our PCI code. - Enable KFENCE in debug defconfig. - Cleanup hugetlbfs s390 specific Kconfig dependency. - Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other simple cleanups" * tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: hugetlbfs: s390 is always 64bit s390/ftrace: remove incorrect __va usage s390/zcrypt: remove incorrect kernel doc indicators scsi: zfcp: fix kernel doc comments s390/sclp: add __nonstring annotation s390/hmcdrv_ftp: fix kernel doc comment s390: remove xpram device driver s390/pci: read clp_list_pci_req only once s390/pci: fix clp_get_state() handling of -ENODEV s390/cio: fix kernel doc comment s390/ctrlchar: fix kernel doc comment s390/con3270: use proper type for tasklet function s390/cpum_cf: move array from header to C file s390/mm: fix kernel doc comments s390/topology: fix topology information when calling cpu hotplug notifiers s390/unwind: use current_frame_address() to unwind current task s390/configs: enable CONFIG_KFENCE in debug_defconfig s390/entry: make oklabel within CHKSTG macro local s390: add kmemleak annotation in stack_alloc() s390/cio: dont unregister subchannel from child-drivers
2021-09-09arm64: mm: limit linear region to 51 bits for KVM in nVHE modeArd Biesheuvel
KVM in nVHE mode divides up its VA space into two equal halves, and picks the half that does not conflict with the HYP ID map to map its linear region. This worked fine when the kernel's linear map itself was guaranteed to cover precisely as many bits of VA space, but this was changed by commit f4693c2716b35d08 ("arm64: mm: extend linear region for 52-bit VA configurations"). The result is that, depending on the placement of the ID map, kernel-VA to hyp-VA translations may produce addresses that either conflict with other HYP mappings (including the ID map itself) or generate addresses outside of the 52-bit addressable range, neither of which is likely to lead to anything useful. Given that 52-bit capable cores are guaranteed to implement VHE, this only affects configurations such as pKVM where we opt into non-VHE mode even if the hardware is VHE capable. So just for these configurations, let's limit the kernel linear map to 51 bits and work around the problem. Fixes: f4693c2716b3 ("arm64: mm: extend linear region for 52-bit VA configurations") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210826165613.60774-1-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-09parisc: Mark sched_clock unstable only if clocks are not syncronizedHelge Deller
We check at runtime if the cr16 clocks are stable across CPUs. Only mark the sched_clock unstable by calling clear_sched_clock_stable() if we know that we run on a system which isn't syncronized across CPUs. Signed-off-by: Helge Deller <deller@gmx.de>
2021-09-09parisc: Reduce sigreturn trampoline to 3 instructionsHelge Deller
We can move the INSN_LDI_R20 instruction into the branch delay slot. Signed-off-by: Helge Deller <deller@gmx.de>
2021-09-09parisc: Check user signal stack trampoline is inside TASK_SIZEHelge Deller
Add some additional checks to ensure the signal stack is inside userspace bounds. Signed-off-by: Helge Deller <deller@gmx.de>
2021-09-09parisc: Drop useless debug info and comments from signal.cHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-03-22 02:03:46 +0000