summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-04-11Merge branch 'depends/clk-for-3.10' into next/cleanupOlof Johansson
Bringin in clk subsystem dependencies needed by sunxi. * depends/clk-for-3.10: (26 commits) clk: sunxi: drop an unnecesary kmalloc clk: sunxi: drop CLK_IGNORE_UNUSED clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag clk: mvebu: Use common of_clk_init() function clk: fix clk_mux::flags kerneldoc clk: allow reentrant calls into the clk framework clk: abstract locking out into helper functions clk: zynq: Add missing zynq clk header clk: sunxi: rename compatible strings arm: sunxi: Add useful information about sunxi clocks clk: arm: sunxi: Add a new clock driver for sunxi SOCs clk: ux500: Fix prcmu clocks registration ARM: imx: adapt clk_busy_mux to new clk_mux struct clk: Add composite clock type clk: add table lookup to mux clk: Fix incorrect return type in clk.c clk: prima2: fix return value check in sirfsoc_of_clk_init() clk:SPEAr1340: Correct parent clock configuration documentation: clk: fix couple of misspelling ...
2013-04-11Merge tag 'imx-cleanup-3.10' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: The imx cleanup for 3.10: * Clean up a couple of unneeded function declarations * Remove imx specific cpufreq driver as generic cpufreq-cpu0 works well as the replacement * Remove platform ahci support * Clean up unused ARCH/MACH Kconfig symbols * Remove a couple of unused files * tag 'imx-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: imx: remove mx6q.h ARM: imx: remove Makefile.boot ARM: imx: clk-imx27: Do not register peripheral clock for SSI ARM: imx: avic: Move avic_saved_mask_reg under CONFIG_PM ARM: imx: Remove cpufreq driver ARM: imx: remove pl310_get_save_ptr() declaration ARM: imx: remove duplicated function declaration Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-09Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into ↵Arnd Bergmann
next/cleanup From Nicolas Ferre <nicolas.ferre@atmel.com>: Trivial typos and some macros removal & modification * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: at91: remove unused dbgu_readl() macro Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'cleanup-samsung-for-v3.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim <kgene.kim@samsung.com>: cleanup unused codes for samsung * tag 'cleanup-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ARM: S3C64XX: remove obsolete Makefile line ARM: S3C24XX: remove unneeded "config SMDK2440_CPU2442" ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIG ARM: SAMSUNG: remove "config S3C_BOOT_WATCHDOG" ARM: EXYNOS: change HAVE_SAMSUNG_KEYPAD to KEYBOARD_SAMSUNG ARM: EXYNOS: remove duplicated include from common.c ARM: EXYNOS: drop "select HAVE_SCHED_CLOCK" ARM: S3C24XX: drop "select MACH_NEO1973" ARM: S3C24XX: drop "select MACH_N35" Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'mxs-cleanup-3.10' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo <shawn.guo@linaro.org>: The mxs cleanup for 3.10: * Clean up timer code and move it into drivers/clocksource * Clean up icoll code and move it into drivers/irqchip * Clean up clock code to not include <mach/*> headers * Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*> headers * Clean up mach-mxs code to get it prepared for multiplatform support * tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits) clocksource: mxs_timer: Add semicolon at end of line ARM: mxs: remove unused headers ARM: mxs: merge imx23 and imx28 into one machine_desc ARM: mxs: remove common.h ARM: mxs: move mxs_get_ocotp() into mach-mxs.c ARM: mxs: remove mm.c ARM: mxs: use debug_ll_io_init for low-level debug ARM: mxs: get ocotp base address from device tree ARM: mxs: remove system.c ARM: mxs: get reset address from device tree ARM: mxs: remove empty hardware.h ASoC: mxs-saif: remove mach header inclusion iio: mxs-lradc: remove unneeded mach header inclusion rtc: stmp3xxx: use stmp_reset_block() instead clk: mxs: remove the use of mach level IO accessor clk: mxs: get base address from device tree ARM: mxs: remove unneeded mach-types.h inclusion ARM: mxs: move icoll driver into drivers/irqchip ARM: mxs: call stmp_reset_block() in icoll ARM: mxs: get icoll base address from device tree ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'v3.9-rc5' into next/cleanupArnd Bergmann
This is a dependency for the mxs/cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'tegra-for-3.10-cleanup' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup From Stephen Warren <swarren@wwwdotorg.org>: ARM: tegra: cleanup This branch includes various cleanup of the core Tegra support. * Unification of the separate board-dt-tegra*.c files into a single tegra.c, now that everything is DT-driven and basically identical. * Use of_clk_get() in the Tegra clocksource driver so that clocks are described in DT rather than hard-coding clock names. * Some cleanup of the PMC-related code, with the aim that the PMC "driver" contains more of the code that touches PMC registers, rather than spreading PMC register accesses through other files. * Conversion of the "PMC" driver to acquire resources describe in device tree rather than hard-coding them. * Use of common code for the CPU sleep TLB invalidation. This branch is based on the previous fixes pull request. * tag 'tegra-for-3.10-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: use setup_mm_for_reboot rather than explicit pgd switch ARM: tegra: replace the CPU power on function with PMC call ARM: tegra: pmc: add power on function for secondary CPUs ARM: tegra: pmc: convert PMC driver to support DT only ARM: tegra: fix the PMC compatible string in DT ARM: tegra: pmc: add specific compatible DT string for Tegra30 and Tegra114 ARM: tegra: refactor tegra{20,30}_boot_secondary clocksource: tegra: move to of_clk_get ARM: tegra: Unify Device tree board files ARM: tegra: Rename board-dt-tegra20.c to tegra.c ARM: tegra: Unify tegra{20,30,114}_init_early() Conflicts: drivers/clocksource/tegra20_timer.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge branch 'tegra/fixes' into next/cleanupArnd Bergmann
This is a dependency for tegra/cleanups Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'omap-for-v3.10/fixes-pm-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren <tony@atomide.com>: Non-critical PM fix via Kevin Hilman <khilman@linaro.org>: OMAP PM fixes for v3.10 Note that this has a dependency to omap-for-v3.10/cleanup-v2-signed. * tag 'omap-for-v3.10/fixes-pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method Signed-off-by: Arnd Bergmann <arnd@arndb.de<
2013-04-09ARM: i.MX: remove unused ARCH_* configsPaul Bolle
This removes the unused Kconfig options ARCH_MX5, ARCH_MX51, ARCH_MX53 and MACH_MX21. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM i.MX53: remove platform ahci supportSascha Hauer
The i.MX53 ahci platform support is unused in mainline. To demotivate people using it just remove it from the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-08Merge tag 'omap-for-v3.10/cleanup-v2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren <tony@atomide.com>: Clean up related changes for v3.10 merge window. Mostly clock and PM related with removal of now unused DMA channel definitions. The clock change to use SoC specific lists will make it a little bit easier to add support for new SoCs variants without having to patch all over the place. * tag 'omap-for-v3.10/cleanup-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build ARM: OMAP4: PM: Now remove L4 per clockdomain static depedency with MPU ARM: OMAP4: PM: Remove L4 wakeup depedency with MPU since errata fix exist now ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus() ARM: OMAP4+: Remove out of placed smp_wmb() in secondary wakeup code ARM: OMAP4+: Remove un-necessary cacheflush in secondary CPU boot path ARM: OMAP4+: Remove the un-necessary cache flush from hotplug code ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tuple ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures ARM: OMAP2+: Remove unused DMA channel definitions ARM: OMAP1: Remove unused DMA channel definitions ARM: OMAP2+: clock data: Remove CK_* flags Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08ARM: at91: remove trailing semicolon from macrosJohan Hovold
Remove trailing semicolon from register-access macros. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-08ARM: at91/setup: fix trivial typosJohan Hovold
Fix a few trivial typos in panic, warning and debug messages. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-09ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"Paul Bolle
The only user of Kconfig symbol EXYNOS_DEV_DRM was removed in commit 0a9d5ac307ae ("ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms"). It is safe to remove this symbol too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08ARM: EXYNOS: change the name of USB ohci headerJingoo Han
This patch changes the name of USB ohci header from 'usb-exynos.h' to 'usb-ohci-exynos.h'. This is because this header file has the platdata for only EXYNOS OHCI. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08ARM: SAMSUNG: Remove unnecessary code for dmaPadmavathi Venna
This patch removes the usage of DMACH_DT_PROP and dt_dmach_prop from dma code as the new generic dma dt binding support has been added. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08ARM: S3C24XX: Remove unused GPIO drive strength register definitionsSylwester Nawrocki
There is currently no users of these definitions so remove them. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-05ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup ↵Santosh Shilimkar
method While waking up CPU from off state using clock domain force wakeup, restore the CPU power state to ON state before putting CPU clock domain under hardware control. Otherwise CPU wakeup might fail. The change is recommended for all OMAP4+ devices though the PRCM weakness was observed on OMAP5 devices first. As a result of weakness, lock-up is observed inside the hardware state machine of local CPU PRCM and results are UN-predictable as per designers. In software testing, we have seen hard-locks most of the time where system gets frozen. With power domain state restored, system behaves correctly. So update the code accordingly. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-04-04ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412Alexander Shiyan
S3C2412 boards are already under "if CPU_S3C2412" condition, so additional dependencies on this symbol can be removed. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410Alexander Shiyan
S3C2410 boards are already under "if CPU_S3C2410" condition, so additional dependencies on this symbol can be removed. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boardsAlexander Shiyan
Board options are already under "if ARCH_S3C24XX" condition, so additional dependencies on this symbol can be removed. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"Paul Bolle
s3c_rtc_setname() tests for CONFIG_SAMSUNG_DEV_RTC or CONFIG_PLAT_S3C24XX. But of these two macros only CONFIG_PLAT_S3C24XX actually exists. Now we can see that s3c_device_rtc is only defined if either CONFIG_PLAT_S3C24XX or CONFIG_S3C_DEV_RTC are defined. So, apparently, it was intended to use CONFIG_S3C_DEV_RTC here. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"Paul Bolle
Commit ebc433c2890f ("ARM: S5P64X0: Add HSMMC setup for host Controller") added the Kconfig symbol S5P64X0_SETUP_SDHCI_GPIO. By accident it also used a macro CONFIG_S5P64X0_SETUP_SDHCI. Fix that typo. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04ARM: S3C64XX: remove obsolete Makefile linePaul Bolle
Commit a07613a54d70 ("Merge branch 'samsung/dt' into samsung/cleanup") added this line to arch/arm/mach-s3c64xx/Makefile: obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o But at that time CONFIG_S3C64XX_DEV_SPI wasn't a valid Kconfig macro anymore and arch/arm/mach-s3c64xx/dev-spi.c was already removed. So we can remove this line. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-03ARM: at91: remove unused dbgu_readl() macroNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-02Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into ↵Olof Johansson
next/cleanup Tiny one-line typo patch. * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: ARM: at91: Fix typo in restart code panic message Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02ARM: irq: Call irqchip_init if no init_irq function is specifiedMaxime Ripard
More and more sub-architectures are using only the irqchip_init function. Make the core code call this function if no init_irq field is provided in the machine description to remove some boilerplate code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02Merge branch 'gic' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 into next/cleanup * 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: irqchip: gic: Perform the gic_secondary_init() call via CPU notifier irqchip: gic: Call handle_bad_irq() directly arm: Move chained_irq_(enter|exit) to a generic file arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h + Linux 3.9-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-02ARM: imx: remove mx6q.hShawn Guo
Those stuff defined in mx6q.h is used nowhere now. Remove the header. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02ARM: imx: remove Makefile.bootShawn Guo
Since we have converted IMX to multiplatform build, Makefile.boot is not used anyway. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02ARM: imx: clk-imx27: Do not register peripheral clock for SSIFabio Estevam
imx ssi block has two types of clocks: - ipg: bus clock, the clock needed for accessing registers. - per: peripheral clock, the clock needed for generating the bit rate. Currently ssi driver only supports slave mode and thus need only to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02ARM: imx: avic: Move avic_saved_mask_reg under CONFIG_PMFabio Estevam
When building a kernel with CONFIG_PM undefined, the following warning happens: arch/arm/mach-imx/avic.c:57:12: warning: 'avic_saved_mask_reg' defined but not used [-Wunused-variable] Move avic_saved_mask_reg definition inside the '#ifdef CONFIG_PM' block to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove unused headersShawn Guo
Most of the stuff in the headers are used nowhere now. Move a few things that are useful for mach-mxs.c into there and remove the headers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: merge imx23 and imx28 into one machine_descShawn Guo
Most of the function hooks are same between imx23 and imx28 machine_desc, so merge them into one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove common.hShawn Guo
All three remaining functions declared in common.h are implemented by clock driver. Create header include/linux/clk/mxs.h to contain them and remove common.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move mxs_get_ocotp() into mach-mxs.cShawn Guo
All the users of mxs_get_ocotp() are in mach-mxs.c. Move the function into mach-mxs.c, make it a static function, and then remove ocotp.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove mm.cShawn Guo
The static mapping is used nowhere now. Hence mm.c can be removed completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: use debug_ll_io_init for low-level debugShawn Guo
The only user of the static mapping done in mx23_map_io and mx28_map_io is low-level debug now. Use debug_ll_io_init() instead, so that the static mapping is used nowhere and can be removed completely later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get ocotp base address from device treeShawn Guo
Instead of using the static definitions, get ocotp base address from device tree with mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove system.cShawn Guo
There is no user of function mxs_reset_block() now. Let's move mxs_restart() into mach-mxs.c as a static function and remove system.c completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get reset address from device treeShawn Guo
Instead of using static address definition, get reset address from device tree with mapping, so that core_initcall mxs_arch_reset_init() can be killed. The "rtc" clock code in mxs_arch_reset_init() seems to be zombie, since there is no clk lookup defined in clock driver at all. Remove it together. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove empty hardware.hShawn Guo
The hardware.h is an empty header and used nowhere now. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01clk: mxs: get base address from device treeShawn Guo
Instead of using the static definitions, get clkctrl and digctl base addresses with mapping from device tree. Use macro on variable is not nice, but it's done here to save huge pointless diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-04-01ARM: mxs: remove unneeded mach-types.h inclusionShawn Guo
Remove the unneeded mach-types.h inclusion from mxs.h, which is a leftover from commit 845da6b (ARM: mxs: detect SoC by checking CHIPID register). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move icoll driver into drivers/irqchipShawn Guo
Move icoll.c into drivers/irqchip as irq-mxs.c, and along with the renaming, change the driver to use IRQCHIP_DECLARE. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: call stmp_reset_block() in icollShawn Guo
Call stmp_reset_block() rather than mxs_reset_block(), so that <mach/common.h> inclusion can be removed from icoll driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get icoll base address from device treeShawn Guo
Rather than using the static definition, it gets icoll base address with mapping from device tree. As the result, <mach/mxs.h> inclusion can be removed from the driver now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move timer driver into drivers/clocksourceShawn Guo
Move mxs timer driver into drivers/clocksource as mxs_timer.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: select STMP_DEVICE and use it for timer codeShawn Guo
Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit (git 2.34.1) at 2025-05-10 00:25:48 +0000