| Age | Commit message (Collapse) | Author |
|---|
|
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit.
Fixes: 722e42e45c2f1 ("perf/x86: Support counter mask")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250508134452.73960-1-adrian.hunter@intel.com
|
|
perf always allocates contiguous AUX pages based on aux_watermark.
However, this contiguous allocation doesn't benefit all PMUs. For
instance, ARM SPE and TRBE operate with virtual pages, and Coresight
ETR allocates a separate buffer. For these PMUs, allocating contiguous
AUX pages unnecessarily exacerbates memory fragmentation. This
fragmentation can prevent their use on long-running devices.
This patch modifies the perf driver to be memory-friendly by default,
by allocating non-contiguous AUX pages. For PMUs requiring contiguous
pages (Intel BTS and some Intel PT), the existing
PERF_PMU_CAP_AUX_NO_SG capability can be used. For PMUs that don't
require but can benefit from contiguous pages (some Intel PT), a new
capability, PERF_PMU_CAP_AUX_PREFER_LARGE, is added to maintain their
existing behavior.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250508232642.148767-1-yabinc@google.com
|
|
Add a simple rdmsrl_on_cpu() compatibility wrapper for
rdmsrq_on_cpu(), to make life in -next easier, where
the PM tree recently grew more uses of the old API.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Link: https://lore.kernel.org/r/20250512145517.6e0666e3@canb.auug.org.au
|
|
So 'make W=1' complains about a couple of kernel-doc descriptions
in our MM primitives in pgtable.c:
arch/x86/mm/pgtable.c:623: warning: Function parameter or struct member 'reserve' not described in 'reserve_top_address'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'p4d' not described in 'p4d_set_huge'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'addr' not described in 'p4d_set_huge'
... so on
Fix them all up, add missing parameter documentation, and fix various spelling
inconsistencies while at it.
[ mingo: Harmonize kernel-doc annotations some more. ]
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250514062637.3287779-1-shivankg@amd.com
|
|
The NanoPi R5S has 4 GPIO LEDs, a RED one for SYStem power and 3 green
LEDs meant to indicate that a cable is connected to either of the
2.5GbE LAN ports or the 1GbE WAN port.
In the NanoPi R5S schematic (2204; page 19) as well as on the PCB and on
the case, SYS is used and not POWER. So replace 'power' with 'sys'.
But keep the 'power_led' label/phandle even though the kernel doesn't
use it, but it may be used outside of it.
The SYStem LED already had "heartbeat" as its default-trigger.
Set the default-trigger to "netdev" for the NICs so they will show when
LAN1/LAN2/WAN is connected and set their default-state to "off".
Also assign labels as close as possible to the labels on the case, while
still being descriptive enough in their own right.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250513170056.96259-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
PP1516 are Touchscreen devices built around the PX30 SoC and companion
devices to PX30-Cobra, again with multiple display options.
The devices feature an EMMC, OTG port and a 720x1280 display with a
touchscreen and camera
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-7-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Cobra are Touchscreen devices built around the PX30 SoC using
a variety of display options.
The devices feature an EMMC, network port, usb host + OTG ports and
a 720x1280 display with a touchscreen.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Using snps,reset-* properties to handle the ethernet-phy resets is
deprecated and instead a real phy node should be used.
Move the Ringneck phy-reset properties to such a node
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Using snps,reset-* properties for handling the phy-reset is deprecated
and instead a real phy node should be defined that then contains the
reset-gpios handling.
To facilitate this, add the core mdio node under the px30's gmac, similar
to how the other Rockchip socs already do this.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250514150745.2437804-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Puma with Haikou
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-5-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The u2phy1_host port is the part of the USB PHY1 (namely the
HOST1_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST1_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers and associated part in USB2.0 PHY.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-4-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Currently, the onboard Cypress CYUSB3304 USB hub is not defined in
the device tree, and hub reset pin is provided as vcc5v0_host
regulator to usb phy. This causes instability issues, as a result
of improper reset duration.
The fixed regulator device requests the GPIO during probe in its
inactive state (except if regulator-boot-on property is set, in
which case it is requested in the active state). Considering gpio
is GPIO_ACTIVE_LOW for Puma, it means it’s driving it high. Then
the regulator gets enabled (because regulator-always-on property),
which drives it to its active state, meaning driving it low.
The Cypress CYUSB3304 USB hub actually requires the reset to be
asserted for at least 5 ms, which we cannot guarantee right now
since there's no delay in the current config, meaning the hub may
sometimes work or not. We could add delay as offered by
fixed-regulator but let's rather fix this by using the proper way
to model onboard USB hubs.
Define hub_2_0 and hub_3_0 nodes, as the onboard Cypress hub
consist of two 'logical' hubs, for USB2.0 and USB3.0.
Use the 'reset-gpios' property of hub to assign reset pin instead
of using regulator. Rename the vcc5v0_host regulator to
cy3304_reset to be more meaningful. Pin is configured to
output-high by default, which sets the hub in reset state
during pin controller initialization. This allows to avoid double
enumeration of devices in case the bootloader has setup the USB
hub before the kernel.
The vdd-supply and vdd2-supply properties in hub nodes are
added to provide correct dt-bindings, although power supplies are
always enabled based on HW design.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org # 6.6
Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-3-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The rk3036 does contain a usb2phy, just until now it was just used
implicitly without additional configuration. As we now have the bits
in place for it getting actually controlled, add the necessary phy-node
to the GRF simple-mfd.
Enable the phy-ports in the same patch to not create bisectability
issues, as hooking up the phys to the usb controllers would create
probe deferrals until a board enables them. Doing everything in one
patch, solves that issue.
Only rk3036-kylin actually enabled the usb controllers, so is the only
board affected.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503201512.991277-4-heiko@sntech.de
|
|
Even though they will be the same for all boards, i2c and uart aliases
are supposed to live in the individual board files, to not create
aliases for disabled nodes.
So move the newly added aliases for rk3528 over to the Radxa E20C board,
which is the only rk3528 board right now.
Fixes: d3a05f490d04 ("arm64: dts: rockchip: Add I2C controllers for RK3528")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250510220106.2108414-1-heiko@sntech.de
|
|
use too
Expose certain 'struct cpuinfo_x86' fields via asm-offsets for x86_64
too, so that it will be possible to set CPU capabilities from 64-bit
asm code.
32-bit already used these fields, so simply move those offset exports into
the unified asm-offsets.c file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250514104242.1275040-12-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Add proper pahole version dependency to CONFIG_GENDWARFKSYMS to avoid
module loading errors
- Fix UAPI header tests for the OpenRISC architecture
- Add dependency on the libdw package in Debian and RPM packages
- Disable -Wdefault-const-init-unsafe warnings on Clang
- Make "make clean ARCH=um" also clean the arch/x86/ directory
- Revert the use of -fmacro-prefix-map=, which causes issues with
debugger usability
* tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "module.builtin" to "modules.builtin"
Revert "kbuild, rust: use -fremap-path-prefix to make paths relative"
Revert "kbuild: make all file references relative to source root"
kbuild: fix dependency on sorttable
init: remove unused CONFIG_CC_CAN_LINK_STATIC
um: let 'make clean' properly clean underlying SUBARCH as well
kbuild: Disable -Wdefault-const-init-unsafe
kbuild: rpm-pkg: Add (elfutils-devel or libdw-devel) to BuildRequires
kbuild: deb-pkg: Add libdw-dev:native to Build-Depends-Arch
usr/include: openrisc: don't HDRTEST bpf_perf_event.h
kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86
|
|
Remove hard-coded strings by using the str_disabled_enabled() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210224246.363318-1-thorsten.blum@linux.dev
|
|
Remove hard-coded strings by using the str_enabled_disabled() and
str_on_off() helper functions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250117114625.64903-2-thorsten.blum@linux.dev
|
|
Remove hard-coded strings by using the str_write_read() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210100648.1440-2-thorsten.blum@linux.dev
|
|
strcpy() is deprecated; use strscpy() instead.
Don't cast the destination buffer from 'u8[]' to 'char *' to satisfy the
__must_be_array() requirement of strscpy().
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250421183110.436265-1-thorsten.blum@linux.dev
|
|
When a device is opened by a userspace driver, via VFIO interface, DMA
window is created. This DMA window has TCE Table and a corresponding
data for userview of TCE table.
When the userspace driver closes the device, all the above infrastructure
is free'ed and the device control given back to kernel. Both DMA window
and TCE table is getting free'ed. But due to a code bug, userview of the
TCE table is not getting free'ed. This is resulting in a memory leak.
Befow is the information from KMEMLEAK
unreferenced object 0xc008000022af0000 (size 16777216):
comm "senlib_unit_tes", pid 9346, jiffies 4294983174
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x59c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
unreferenced object 0xc008000023b00000 (size 4194304):
comm "senlib_unit_tes", pid 9351, jiffies 4294984116
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_create_default_window+0x88/0x120 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x57c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
Fixes: f431a8cde7f1 ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250512224653.35697-1-gbatra@linux.ibm.com
|
|
Now that orig_call can never be NULL, remove the respective check.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512221911.61314-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently a crash in a leaf prog (caused by a bug) produces the
following call trace:
[<000003ff600ebf00>] bpf_prog_6df0139e1fbf2789_fentry+0x20/0x78
[<0000000000000000>] 0x0
This is because leaf progs do not store backchain. Fix by making all
progs do it. This is what GCC and Clang-generated code does as well.
Now the call trace looks like this:
[<000003ff600eb0f2>] bpf_prog_6df0139e1fbf2789_fentry+0x2a/0x80
[<000003ff600ed096>] bpf_trampoline_201863462940+0x96/0xf4
[<000003ff600e3a40>] bpf_prog_05f379658fdd72f2_classifier_0+0x58/0xc0
[<000003ffe0aef070>] bpf_test_run+0x210/0x390
[<000003ffe0af0dc2>] bpf_prog_test_run_skb+0x25a/0x668
[<000003ffe038a90e>] __sys_bpf+0xa46/0xdb0
[<000003ffe038ad0c>] __s390x_sys_bpf+0x44/0x50
[<000003ffe0defea8>] __do_syscall+0x150/0x280
[<000003ffe0e01d5c>] system_call+0x74/0x98
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512122717.54878-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It
seems to be using the same baseboard as the HP OmniBook X 14 so just use
that for now.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-4-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a label to the sound node to make it easier to override from other
nodes.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-2-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Only two little a520s share the same L2, every a720 has their own L2
cache.
Fixes: d2350377997f ("arm64: dts: qcom: add initial SM8650 dtsi")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250405105529.309711-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Link LVDS clocks to the from MDP4 to the MMCC and back from the MMCC
to the MDP4 display controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-7-6b212160b44c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.
Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-x1e001de-devkit-dts-enable-usb-a-ports-v1-1-81153b2d1edf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DTS support for Qualcomm qcs6490-rb3gen2 industrial mezzanine board.
Signed-off-by: Sahil Chandna <quic_chandna@quicinc.com>
Signed-off-by: Nirmesh Kumar Singh <quic_nkumarsi@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250323123333.1622860-1-quic_nkumarsi@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit d37e2646c8a5 ("arm64: dts: qcom: x1e80100-pmics: Enable all SMB2360
separately") disables all SMB2360s and let the board DTS explicitly enable
them. The HP OmniBook DTS is from before this change and is missing the
explicit enabling. Add that to get all USB root ports.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250319160509.1812805-1-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Solved by Dmitry Baryshkov on the APQ8064 SoC
Link: https://lore.kernel.org/all/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com/
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-expressatt-solve-dts-errors-v1-1-14012a4bc315@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable support for download mode to collect RAM dumps in case of a
system crash, allowing post mortem analysis.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-ipq5018-syscon-v1-2-eb1ad2414c3c@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable Venus on Lenovo Miix 630 and specify corresponding firmware file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20250425-miix-630-venus-v2-1-cdfca385a0c8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the PCIe controller and PHY nodes for RDP 432-c2.
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-2-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add phy and controller nodes for a 2-lane Gen2 and
a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
one global interrupt.
NOTE: the PCIe controller supports gen3, yet the phy is limited to gen2.
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250514-ipq5018-pcie-v10-1-5b42a8eff7ea@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Both ports seem to work, just like on other X1E laptops.
Tested with a Type-C-to-HDMI2.0 dock (translating into up to 2 DP lanes
worth of bandwidth).
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250514-topic-romu_dp-v1-1-6242d6acb5e5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
|
When operating at low speeds, the display may throw an underflow
error and the display itself goes blank. Increasing the fifo-th
value appears to correct this problem and the display can now
operate when the system is operating at speeds as low as 100MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504102959.81830-1-aford173@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add nodes for the DMAC IPs found on the Renesas RZ/V2H(P) SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250423143422.3747702-7-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
arch_uprobe_skip_sstep() returns true if instruction was emulated, that
is to say, there is no need to single step for the emulated instructions.
regs->csr_era will point to the destination address directly after the
exception, so the resume_era related code is redundant, just remove them.
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When executing the "perf probe" and "perf stat" test cases about some
cryptographic algorithm, the output shows that "Trace/breakpoint trap".
This is because it uses the software singlestep breakpoint for uprobes
on LoongArch, and no need to use the hardware singlestep. So just remove
the related function call to user_{en,dis}able_single_step() for uprobes
on LoongArch.
How to reproduce:
Please make sure CONFIG_UPROBE_EVENTS is set and openssl supports sm2
algorithm, then execute the following command.
cd tools/perf && make
./perf probe -x /usr/lib64/libcrypto.so BN_mod_mul_montgomery
./perf stat -e probe_libcrypto:BN_mod_mul_montgomery openssl speed sm2
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Save and restore CSR.CNTC for hibernation which is similar to suspend.
For host this is unnecessary because sched clock is ensured continuous,
but for kvm guest sched clock isn't enough because rdtime.d should also
be continuous.
Host::rdtime.d = Host::CSR.CNTC + counter
Guest::rdtime.d = Host::CSR.CNTC + Host::CSR.GCNTC + Guest::CSR.CNTC + counter
so,
Guest::rdtime.d = Host::rdtime.d + Host::CSR.GCNTC + Guest::CSR.CNTC
To ensure Guest::rdtime.d continuous, Host::rdtime.d should be at first
continuous, while Host::CSR.GCNTC / Guest::CSR.CNTC is maintained by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now arch_cpu_idle() is annotated with __cpuidle which means it is in
the .cpuidle.text section, but __arch_cpu_idle() isn't. Thus, fix the
missing .cpuidle.text section assignment for __arch_cpu_idle() in order
to correct backtracing with nmi_backtrace().
The principle is similar to the commit 97c8580e85cf81c ("MIPS: Annotate
cpu_wait implementations with __cpuidle")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Cc: stable@vger.kernel.org
Fixes: 803b0fc5c3f2baa6e5 ("LoongArch: Add process management")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
dcn32_calculate_wm_and_dlg()
DC_FP_START()
dcn32_calculate_wm_and_dlg_fpu()
dcn32_find_dummy_latency_index_for_fw_based_mclk_switch()
dcn32_internal_validate_bw()
dcn32_enable_phantom_stream()
dc_create_stream_for_sink()
kzalloc(GFP_KERNEL)
__kmem_cache_alloc_node()
__cond_resched()
DC_FP_END()
This patch is similar to commit d02198550423a0b (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
Cc: stable@vger.kernel.org
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect external
peripherals. It features:
- Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz)
- 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM
- between 16 and 128 GiB eMMC flash
- AXP707 PMIC (compatible to AXP803)
- 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY
- XR829 WIFI+Bluetooth chip
- 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors
(connected via a USB hub connected to USB1 on the SoC)
- microSD card slot
- 3.5mm A/V port
- 12V power supply
- connectors for an LVDS or MIPI-DSI panel
Add the devicetree describing the board's peripherals and their
connections.
Despite being a devboard, the manufacturer does not publish a schematic
(I asked), so the PMIC rail assignments were bases on BSP dumps,
educated guesses and some experimentation. Dropping the always-on
property from any of the rails carrying it will make the board hang as
soon as the kernel turns off unused regulators.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505164729.18175-4-andre.przywara@arm.com
[wens@csie.org: fix property in &usbphy; fix comment typo in &usb_otg]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Enable the missing configs to get all devices on the MediaTek Genio
1200, 700, 510 and 350 EVK boards probing, as indicated by the DT
kselftest.
This includes support for:
Genio 1200/700/510/350:
* MT6359/MT6357 PMICs Auxiliary ADC
Genio 1200/700/510:
* MDP3 (video scaling and color space conversion IP block)
* ITE IT5205 Type-C USB Alternate Mode Passive MUX
* Himax HX8279 controller based KD070FHFID078 DSI panel
Genio 700/510:
* Richtek RT1715 USB Type-C PD Controller
Genio 1200:
* MediaTek PCIe PHY
* Mediatek MT6360 USB Type-C Port Controller
Genio 350:
* STARTEK KD070FHFID015 DSI panel
* MediaTek UART DMA controller (APDMA)
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513-genio-defconfig-v1-1-c3862f91b6b2@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
lazy_mmu_mode is not supposed to permit nesting. But in practice this
does happen with CONFIG_DEBUG_PAGEALLOC, where a page allocation inside
a lazy_mmu_mode section (such as zap_pte_range()) will change
permissions on the linear map with apply_to_page_range(), which
re-enters lazy_mmu_mode (see stack trace below).
The warning checking that nesting was not happening was previously being
triggered due to this. So let's relax by removing the warning and
tolerate nesting in the arm64 implementation. The first (inner) call to
arch_leave_lazy_mmu_mode() will flush and clear the flag such that the
remainder of the work in the outer nest behaves as if outside of lazy
mmu mode. This is safe and keeps tracking simple.
Code review suggests powerpc deals with this issue in the same way.
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at arch/arm64/include/asm/pgtable.h:89 __apply_to_page_range+0x85c/0x9f8
Modules linked in: ip_tables x_tables ipv6
CPU: 6 UID: 0 PID: 1 Comm: systemd Not tainted 6.15.0-rc5-00075-g676795fe9cf6 #1 PREEMPT
Hardware name: QEMU KVM Virtual Machine, BIOS 2024.08-4 10/25/2024
pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __apply_to_page_range+0x85c/0x9f8
lr : __apply_to_page_range+0x2b4/0x9f8
sp : ffff80008009b3c0
x29: ffff80008009b460 x28: ffff0000c43a3000 x27: ffff0001ff62b108
x26: ffff0000c43a4000 x25: 0000000000000001 x24: 0010000000000001
x23: ffffbf24c9c209c0 x22: ffff80008009b4d0 x21: ffffbf24c74a3b20
x20: ffff0000c43a3000 x19: ffff0001ff609d18 x18: 0000000000000001
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000003
x14: 0000000000000028 x13: ffffbf24c97c1000 x12: ffff0000c43a3fff
x11: ffffbf24cacc9a70 x10: ffff0000c43a3fff x9 : ffff0001fffff018
x8 : 0000000000000012 x7 : ffff0000c43a4000 x6 : ffff0000c43a4000
x5 : ffffbf24c9c209c0 x4 : ffff0000c43a3fff x3 : ffff0001ff609000
x2 : 0000000000000d18 x1 : ffff0000c03e8000 x0 : 0000000080000000
Call trace:
__apply_to_page_range+0x85c/0x9f8 (P)
apply_to_page_range+0x14/0x20
set_memory_valid+0x5c/0xd8
__kernel_map_pages+0x84/0xc0
get_page_from_freelist+0x1110/0x1340
__alloc_frozen_pages_noprof+0x114/0x1178
alloc_pages_mpol+0xb8/0x1d0
alloc_frozen_pages_noprof+0x48/0xc0
alloc_pages_noprof+0x10/0x60
get_free_pages_noprof+0x14/0x90
__tlb_remove_folio_pages_size.isra.0+0xe4/0x140
__tlb_remove_folio_pages+0x10/0x20
unmap_page_range+0xa1c/0x14c0
unmap_single_vma.isra.0+0x48/0x90
unmap_vmas+0xe0/0x200
vms_clear_ptes+0xf4/0x140
vms_complete_munmap_vmas+0x7c/0x208
do_vmi_align_munmap+0x180/0x1a8
do_vmi_munmap+0xac/0x188
__vm_munmap+0xe0/0x1e0
__arm64_sys_munmap+0x20/0x38
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x16c
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x19c
irq event stamp: 281312
hardirqs last enabled at (281311): [<ffffbf24c780fd04>] bad_range+0x164/0x1c0
hardirqs last disabled at (281312): [<ffffbf24c89c4550>] el1_dbg+0x24/0x98
softirqs last enabled at (281054): [<ffffbf24c752d99c>] handle_softirqs+0x4cc/0x518
softirqs last disabled at (281019): [<ffffbf24c7450694>] __do_softirq+0x14/0x20
---[ end trace 0000000000000000 ]---
Fixes: 5fdd05efa1cd ("arm64/mm: Batch barriers when updating kernel mappings")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/aCH0TLRQslXHin5Q@arm.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250512150333.5589-1-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
