| Age | Commit message (Collapse) | Author |
|---|
|
Camellia in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The glue helper's XTS routines are no longer used, so drop them.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Twofish in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Serpent in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement CAST6 in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Camellia in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the function pointers in the GCM implementation with static branches,
which are based on code patching, which occurs only at module load time.
This avoids the severe performance penalty caused by the use of retpolines.
In order to retain the ability to switch between different versions of the
implementation based on the input size on cores that support AVX and AVX2,
use static branches instead of static calls.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the gcm(aes-ni) driver open codes the scatterlist handling
that is encapsulated by the skcipher walk API. So let's switch to that
instead.
Also, move the handling at the end of gcmaes_crypt_by_sg() that is
dependent on whether we are encrypting or decrypting into the callers,
which always do one or the other.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The gcm(aes-ni) driver is only built for x86_64, which does not make
use of highmem. So testing for PageHighMem is pointless and can be
omitted.
While at it, replace GFP_ATOMIC with the appropriate runtime decided
value based on the context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drop some prototypes that are declared but never called.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The GCM mode driver uses 16 byte aligned buffers on the stack to pass
the IV to the asm helpers, but unfortunately, the x86 port does not
guarantee that the stack pointer is 16 byte aligned upon entry in the
first place. Since the compiler is not aware of this, it will not emit
the additional stack realignment sequence that is needed, and so the
alignment is not guaranteed to be more than 8 bytes.
So instead, allocate some padding on the stack, and realign the IV
pointer by hand.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AES-NI driver implements XTS via the glue helper, which consumes
a struct with sets of function pointers which are invoked on chunks
of input data of the appropriate size, as annotated in the struct.
Let's get rid of this indirection, so that we can perform direct calls
to the assembler helpers. Instead, let's adopt the arm64 strategy, i.e.,
provide a helper which can consume inputs of any size, provided that the
penultimate, full block is passed via the last call if ciphertext stealing
needs to be applied.
This also allows us to enable the XTS mode for i386.
Tested-by: Eric Biggers <ebiggers@google.com> # x86_64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XTS asm helper arrangement is a bit odd: the 8-way stride helper
consists of back-to-back calls to the 4-way core transforms, which
are called indirectly, based on a boolean that indicates whether we
are performing encryption or decryption.
Given how costly indirect calls are on x86, let's switch to direct
calls, and given how the 8-way stride doesn't really add anything
substantial, use a 4-way stride instead, and make the asm core
routine deal with any multiple of 4 blocks. Since 512 byte sectors
or 4 KB blocks are the typical quantities XTS operates on, increase
the stride exported to the glue helper to 512 bytes as well.
As a result, the number of indirect calls is reduced from 3 per 64 bytes
of in/output to 1 per 512 bytes of in/output, which produces a 65% speedup
when operating on 1 KB blocks (measured on a Intel(R) Core(TM) i7-8650U CPU)
Fixes: 9697fa39efd3f ("x86/retpoline/crypto: Convert crypto assembler indirect jumps")
Tested-by: Eric Biggers <ebiggers@google.com> # x86_64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a NEON-accelerated implementation of BLAKE2b.
On Cortex-A7 (which these days is the most common ARM processor that
doesn't have the ARMv8 Crypto Extensions), this is over twice as fast as
SHA-256, and slightly faster than SHA-1. It is also almost three times
as fast as the generic implementation of BLAKE2b:
Algorithm Cycles per byte (on 4096-byte messages)
=================== =======================================
blake2b-256-neon 14.0
sha1-neon 16.3
blake2s-256-arm 18.8
sha1-asm 20.8
blake2s-256-generic 26.0
sha256-neon 28.9
sha256-asm 32.0
blake2b-256-generic 38.9
This implementation isn't directly based on any other implementation,
but it borrows some ideas from previous NEON code I've written as well
as from chacha-neon-core.S. At least on Cortex-A7, it is faster than
the other NEON implementations of BLAKE2b I'm aware of (the
implementation in the BLAKE2 official repository using intrinsics, and
Andrew Moon's implementation which can be found in SUPERCOP). It does
only one block at a time, so it performs well on short messages too.
NEON-accelerated BLAKE2b is useful because there is interest in using
BLAKE2b-256 for dm-verity on low-end Android devices (specifically,
devices that lack the ARMv8 Crypto Extensions) to replace SHA-1. On
these devices, the performance cost of upgrading to SHA-256 may be
unacceptable, whereas BLAKE2b-256 would actually improve performance.
Although BLAKE2b is intended for 64-bit platforms (unlike BLAKE2s which
is intended for 32-bit platforms), on 32-bit ARM processors with NEON,
BLAKE2b is actually faster than BLAKE2s. This is because NEON supports
64-bit operations, and because BLAKE2s's block size is too small for
NEON to be helpful for it. The best I've been able to do with BLAKE2s
on Cortex-A7 is 18.8 cpb with an optimized scalar implementation.
(I didn't try BLAKE2sp and BLAKE3, which in theory would be faster, but
they're more complex as they require running multiple hashes at once.
Note that BLAKE2b already uses all the NEON bandwidth on the Cortex-A7,
so I expect that any speedup from BLAKE2sp or BLAKE3 would come only
from the smaller number of rounds, not from the extra parallelism.)
For now this BLAKE2b implementation is only wired up to the shash API,
since there is no library API for BLAKE2b yet. However, I've tried to
keep things consistent with BLAKE2s, e.g. by defining
blake2b_compress_arch() which is analogous to blake2s_compress_arch()
and could be exported for use by the library API later if needed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add an ARM scalar optimized implementation of BLAKE2s.
NEON isn't very useful for BLAKE2s because the BLAKE2s block size is too
small for NEON to help. Each NEON instruction would depend on the
previous one, resulting in poor performance.
With scalar instructions, on the other hand, we can take advantage of
ARM's "free" rotations (like I did in chacha-scalar-core.S) to get an
implementation get runs much faster than the C implementation.
Performance results on Cortex-A7 in cycles per byte using the shash API:
4096-byte messages:
blake2s-256-arm: 18.8
blake2s-256-generic: 26.0
500-byte messages:
blake2s-256-arm: 20.3
blake2s-256-generic: 27.9
100-byte messages:
blake2s-256-arm: 29.7
blake2s-256-generic: 39.2
32-byte messages:
blake2s-256-arm: 50.6
blake2s-256-generic: 66.2
Except on very short messages, this is still slower than the NEON
implementation of BLAKE2b which I've written; that is 14.0, 16.4, 25.8,
and 76.1 cpb on 4096, 500, 100, and 32-byte messages, respectively.
However, optimized BLAKE2s is useful for cases where BLAKE2s is used
instead of BLAKE2b, such as WireGuard.
This new implementation is added in the form of a new module
blake2s-arm.ko, which is analogous to blake2s-x86_64.ko in that it
provides blake2s_compress_arch() for use by the library API as well as
optionally register the algorithms with the shash API.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add helper functions for shash implementations of BLAKE2s to
include/crypto/internal/blake2s.h, taking advantage of
__blake2s_update() and __blake2s_final() that were added by the previous
patch to share more code between the library and shash implementations.
crypto_blake2s_setkey() and crypto_blake2s_init() are usable as
shash_alg::setkey and shash_alg::init directly, while
crypto_blake2s_update() and crypto_blake2s_final() take an extra
'blake2s_compress_t' function pointer parameter. This allows the
implementation of the compression function to be overridden, which is
the only part that optimized implementations really care about.
The new functions are inline functions (similar to those in sha1_base.h,
sha256_base.h, and sm3_base.h) because this avoids needing to add a new
module blake2s_helpers.ko, they aren't *too* long, and this avoids
indirect calls which are expensive these days. Note that they can't go
in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S
from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency.
Finally, use these new helper functions in the x86 implementation of
BLAKE2s. (This part should be a separate patch, but unfortunately the
x86 implementation used the exact same function names like
"crypto_blake2s_update()", so it had to be updated at the same time.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The shash_alg structs for the four variants of BLAKE2s are identical
except for the algorithm name, driver name, and digest size. So, avoid
code duplication by using a macro to define these structs.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Counter mode is a stream cipher chaining mode that is typically used
with inputs that are of arbitrarily length, and so a tail block which
is smaller than a full AES block is rule rather than exception.
The current ctr(aes) implementation for arm64 always makes a separate
call into the assembler routine to process this tail block, which is
suboptimal, given that it requires reloading of the AES round keys,
and prevents us from handling this tail block using the 5-way stride
that we use for better performance on deep pipelines.
So let's update the assembler routine so it can handle any input size,
and uses NEON permutation instructions and overlapping loads and stores
to handle the tail block. This results in a ~16% speedup for 1420 byte
blocks on cores with deep pipelines such as ThunderX2.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if
faster driver is enabled") intended to hide modes from the plain NEON
driver that are also implemented by the faster bit sliced NEON one if
both are enabled. However, the defined() CPP function does not detect
if the bit sliced NEON driver is enabled as a module. So instead, let's
use IS_ENABLED() here.
Fixes: 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Follow the same approach as the arm64 driver for implementing a version
of AES-NI in CBC mode that supports ciphertext stealing. This results in
a ~2x speed increase for relatively short inputs (less than 256 bytes),
which is relevant given that AES-CBC with ciphertext stealing is used
for filename encryption in the fscrypt layer. For larger inputs, the
speedup is still significant (~25% on decryption, ~6% on encryption)
Tested-by: Eric Biggers <ebiggers@google.com> # x86_64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block
size multiples") refactored the chacha block handling in the glue code in
a way that may result in the counter increment to be omitted when calling
chacha_block_xor_neon() to process a full block. This violates the skcipher
API, which requires that the output IV is suitable for handling more input
as long as the preceding input has been presented in round multiples of the
block size. Also, the same code is exposed via the chacha library interface
whose callers may actually rely on this increment to occur even for final
blocks that are smaller than the chacha block size.
So increment the counter after calling chacha_block_xor_neon().
Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
|
|
Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
|
|
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
|
|
When a split lock is detected always make sure to disable interrupts
before returning from the trap handler.
The kernel exit code assumes that all exits run with interrupts
disabled, otherwise the SWAPGS sequence can race against interrupts and
cause recursing page faults and later panics.
The problem will only happen on CPUs with split lock disable
functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville.
Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Fixes: bce9b042ec73 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Even though hardware tag-based mode currently doesn't support checking
vmalloc allocations, it doesn't use shadow memory and works with
VMAP_STACK as is. Change VMAP_STACK definition accordingly.
Link: https://lkml.kernel.org/r/ecdb2a1658ebd88eb276dee2493518ac0e82de41.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I3552cbc12321dec82cd7372676e9372a2eb452ac
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's a config option CONFIG_KASAN_STACK that has to be enabled for
KASAN to use stack instrumentation and perform validity checks for
stack variables.
There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled.
Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is
enabled.
Note, that CONFIG_KASAN_STACK is an option that is currently always
defined when CONFIG_KASAN is enabled, and therefore has to be tested
with #if instead of #ifdef.
Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hardware tag-based KASAN is now ready, enable the configuration option.
Link: https://lkml.kernel.org/r/a6fa50d3bb6b318e05c6389a44095be96442b8b0.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add error reporting for hardware tag-based KASAN. When
CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag
fault handler.
SAS bits aren't set in ESR for all faults reported in EL1, so it's
impossible to find out the size of the access the caused the fault. Adapt
KASAN reporting code to handle this case.
Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide implementation of KASAN functions required for the hardware
tag-based mode. Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt
common KASAN code to support the new mode.
Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes
(either related to shadow memory or compiler instrumentation). Expand
those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS.
Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the intoduction of hardware tag-based KASAN some kernel checks of
this kind:
ifdef CONFIG_KASAN
will be updated to:
if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
x86 and s390 use a trick to #undef CONFIG_KASAN for some of the code
that isn't linked with KASAN runtime and shouldn't have any KASAN
annotations.
Also #undef CONFIG_KASAN_GENERIC with CONFIG_KASAN.
Link: https://lkml.kernel.org/r/9d84bfaaf8fabe0fc89f913c9e420a30bd31a260.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch add a set of arch_*() memory tagging helpers currently only
defined for arm64 when hardware tag-based KASAN is enabled. These helpers
will be used by KASAN runtime to implement the hardware tag-based mode.
The arch-level indirection level is introduced to simplify adding hardware
tag-based KASAN support for other architectures in the future by defining
the appropriate arch_*() macros.
Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hardware tag-based KASAN uses the memory tagging approach, which requires
all allocations to be aligned to the memory granule size. Align the
allocations to MTE_GRANULE_SIZE via ARCH_SLAB_MINALIGN when
CONFIG_KASAN_HW_TAGS is enabled.
Link: https://lkml.kernel.org/r/fe64131606b1c2aabfd34ae99554c0d9df18eb19.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When MTE is present, the GCR_EL1 register contains the tags mask that
allows to exclude tags from the random generation via the IRG instruction.
With the introduction of the new Tag-Based KASAN API that provides a
mechanism to reserve tags for special reasons, the MTE implementation has
to make sure that the GCR_EL1 setting for the kernel does not affect the
userspace processes and viceversa.
Save and restore the kernel/user mask in GCR_EL1 in kernel entry and exit.
Link: https://lkml.kernel.org/r/578b03294708cc7258fad0dc9c2a2e809e5a8214.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The gcr_user mask is a per thread mask that represents the tags that are
excluded from random generation when the Memory Tagging Extension is
present and an 'irg' instruction is invoked.
gcr_user affects the behavior on EL0 only.
Currently that mask is an include mask and it is controlled by the user
via prctl() while GCR_EL1 accepts an exclude mask.
Convert the include mask into an exclude one to make it easier the
register setting.
Note: This change will affect gcr_kernel (for EL1) introduced with a
future patch.
Link: https://lkml.kernel.org/r/946dd31be833b660334c4f93410acf6d6c4cf3c4.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) feature
and requires it to be enabled. MTE supports
This patch adds a new mte_enable_kernel() helper, that enables MTE in
Synchronous mode in EL1 and is intended to be called from KASAN runtime
during initialization.
The Tag Checking operation causes a synchronous data abort as a
consequence of a tag check fault when MTE is configured in synchronous
mode.
As part of this change enable match-all tag for EL1 to allow the kernel to
access user pages without faulting. This is required because the kernel
does not have knowledge of the tags set by the user in a page.
Note: For MTE, the TCF bit field in SCTLR_EL1 affects only EL1 in a
similar way as TCF0 affects EL0.
MTE that is built on top of the Top Byte Ignore (TBI) feature hence we
enable it as part of this patch as well.
Link: https://lkml.kernel.org/r/7352b0a0899af65c2785416c8ca6bf3845b66fa1.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the implementation of the in-kernel fault handler.
When a tag fault happens on a kernel address:
* MTE is disabled on the current CPU,
* the execution continues.
When a tag fault happens on a user address:
* the kernel executes do_bad_area() and panics.
The tag fault handler for kernel addresses is currently empty and will be
filled in by a future commit.
Link: https://lkml.kernel.org/r/20201203102628.GB2224@gaia
Link: https://lkml.kernel.org/r/ad31529b073e22840b7a2246172c2b67747ed7c4.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: ensure CONFIG_ARM64_PAN is enabled with MTE]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The hardware tag-based KASAN for compatibility with the other modes stores
the tag associated to a page in page->flags. Due to this the kernel
faults on access when it allocates a page with an initial tag and the user
changes the tags.
Reset the tag associated by the kernel to a page in all the meaningful
places to prevent kernel faults on access.
Note: An alternative to this approach could be to modify page_to_virt().
This though could end up being racy, in fact if a CPU checks the
PG_mte_tagged bit and decides that the page is not tagged but another CPU
maps the same with PROT_MTE and becomes tagged the subsequent kernel
access would fail.
Link: https://lkml.kernel.org/r/9073d4e973747a6f78d5bdd7ebe17f290d087096.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide helper functions to manipulate allocation and pointer tags for
kernel addresses.
Low-level helper functions (mte_assign_*, written in assembly) operate tag
values from the [0x0, 0xF] range. High-level helper functions
(mte_get/set_*) use the [0xF0, 0xFF] range to preserve compatibility with
normal kernel pointers that have 0xFF in their top byte.
MTE_GRANULE_SIZE and related definitions are moved to mte-def.h header
that doesn't have any dependencies and is safe to include into any
low-level header.
Link: https://lkml.kernel.org/r/c31bf759b4411b2d98cdd801eb928e241584fd1f.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) which is
an armv8.5-a architecture extension.
Enable the correct asm option when the compiler supports it in order to
allow the usage of ALTERNATIVE()s with MTE instructions.
Link: https://lkml.kernel.org/r/d03d1157124ea3532eaeb77507988733f5734986.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename kasan_init_tags() to kasan_init_sw_tags() as the upcoming hardware
tag-based KASAN mode will have its own initialization routine. Also
similarly to kasan_init() mark kasan_init_tags() as __init.
Link: https://lkml.kernel.org/r/71e52af72a09f4b50c8042f16101c60e50649fbb.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Software tag-based KASAN mode is fully initialized with kasan_init_tags(),
while the generic mode only requires kasan_init(). Move the
initialization message for tag-based mode into kasan_init_tags().
Also fix pr_fmt() usage for KASAN code: generic.c doesn't need it as it
doesn't use any printing functions; tag-based mode should use "kasan:"
instead of KBUILD_MODNAME (which stands for file name).
Link: https://lkml.kernel.org/r/29a30ea4e1750450dd1f693d25b7b6cb05913ecf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't use kasan_depth. Only define and use it
when one of the software KASAN modes are enabled.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
