summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-07-13x86/vsyscall: allow seccomp filter in vsyscall=emulateWill Drewry
If a seccomp filter program is installed, older static binaries and distributions with older libc implementations (glibc 2.13 and earlier) that rely on vsyscall use will be terminated regardless of the filter program policy when executing time, gettimeofday, or getcpu. This is only the case when vsyscall emulation is in use (vsyscall=emulate is the default). This patch emulates system call entry inside a vsyscall=emulate by populating regs->ax and regs->orig_ax with the system call number prior to calling into seccomp such that all seccomp-dependencies function normally. Additionally, system call return behavior is emulated in line with other vsyscall entrypoints for the trace/trap cases. [ v2: fixed ip and sp on SECCOMP_RET_TRAP/TRACE (thanks to luto@mit.edu) ] Reported-and-tested-by: Owen Kibel <qmewlo@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: SH: Convert out[bwl] macros to inline functions sh: Fix up se7721 GPIOLIB=y build warnings.
2012-07-13Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull a couple of KVM fixes from Avi Kivity: "One is an adjustment for an irq layer change that affected device assignment, the other a one-liner ppc fix." * git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE KVM: Fix device assignment threaded irq handler
2012-07-12SH: Convert out[bwl] macros to inline functionsCorey Minyard
The macros just called BUG(), but that results in unused variable warnings all over the place, like in the IPMI driver. The build regression emails were annoying me, so here's the fix. I have not even compile tested this, but it's rather obvious. [ port type mangled to unsigned long ] Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-11Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge random patches from Andrew Morton. * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits) memblock: free allocated memblock_reserved_regions later mm: sparse: fix usemap allocation above node descriptor section mm: sparse: fix section usemap placement calculation xtensa: fix incorrect memset shmem: cleanup shmem_add_to_page_cache shmem: fix negative rss in memcg memory.stat tmpfs: revert SEEK_DATA and SEEK_HOLE drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT fat: fix non-atomic NFS i_pos read MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section sgi-xp: nested calls to spin_lock_irqsave() fs: ramfs: file-nommu: add SetPageUptodate() drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails h8300/uaccess: add mising __clear_user() h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user() h8300/time: add missing #include <asm/irq_regs.h> h8300/signal: fix typo "statis" h8300/pgtable: add missing #include <asm-generic/pgtable.h> drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled ...
2012-07-11xtensa: fix incorrect memsetAlan Cox
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871 Reported-by: <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/uaccess: add mising __clear_user()Geert Uytterhoeven
Fix the build error: include/linux/regset.h: In function 'user_regset_copyout_zero': include/linux/regset.h:289:3: error: implicit declaration of function '__clear_user' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user()Geert Uytterhoeven
__gu_val is const if the passed ptr is const, giving: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:442:2: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:448:4: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:499:3: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:508:3: error: assignment of read-only variable '__gu_val' make[4]: *** [init/main.o] Error 1 As we don't care about the actual value of __gu_val in the unhandled case (it will cause a link error anyway), just remove the assignment. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/time: add missing #include <asm/irq_regs.h>Geert Uytterhoeven
Fix the build error: arch/h8300/kernel/time.c: In function 'h8300_timer_tick': arch/h8300/kernel/time.c:39:2: error: implicit declaration of function 'get_irq_regs' [-Werror=implicit-function-declaration] arch/h8300/kernel/time.c:39:42: error: invalid type argument of '->' (have 'int') Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/signal: fix typo "statis"Geert Uytterhoeven
The keyword is "static", not "statis": arch/h8300/kernel/signal.c:455:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' arch/h8300/kernel/signal.c: In function 'do_notify_resume': arch/h8300/kernel/signal.c:511:3: error: implicit declaration of function 'do_signal' [-Werror=implicit-function-declaration] arch/h8300/kernel/signal.c: At top level: arch/h8300/kernel/signal.c:414:1: warning: 'handle_signal' defined but not used [-Wunused-function] Introduced in commit 7ae4e32a6514 ("h8300: switch to saved_sigmask-based sigsuspend/rt_sigsuspend") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/pgtable: add missing #include <asm-generic/pgtable.h>Geert Uytterhoeven
Fix the h8300 build error: kernel/sched/core.c: In function 'context_switch': kernel/sched/core.c:2061:2: error: implicit declaration of function 'arch_start_context_switch' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: use "#elif defined(CONFIG_*)" instead of "#elif CONFIG_*"Geert Uytterhoeven
Fix the warnings: arch/mn10300/kernel/irq.c:173:7: warning: "CONFIG_MN10300_TTYSM1_TIMER9" is not defined [-Wundef] arch/mn10300/kernel/irq.c:175:7: warning: "CONFIG_MN10300_TTYSM1_TIMER3" is not defined [-Wundef] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: mm/dma-alloc.c needs <linux/export.h>Geert Uytterhoeven
Fix the warnings: arch/mn10300/mm/dma-alloc.c: At top level: arch/mn10300/mm/dma-alloc.c:63:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:63:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:63:1: warning: parameter names (without types) in function declaration [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:75:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: kernel/traps.c needs <linux/export.h>Geert Uytterhoeven
Fix the warning: arch/mn10300/kernel/traps.c:304:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/kernel/traps.c:304:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/kernel/traps.c:304:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: kernel/internal.h needs <linux/irqreturn.h>Geert Uytterhoeven
Fix the nm10300 build failure: In file included from arch/mn10300/kernel/csrc-mn10300.c:14:0: arch/mn10300/kernel/internal.h:42:1: error: unknown type name 'irqreturn_t' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: remove duplicate definition of PTRACE_O_TRACESYSGOODGeert Uytterhoeven
Fix the warning: include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default] arch/mn10300/include/asm/ptrace.h:85:0: note: this is the location of the previous definition We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: move setup_jiffies_interrupt() to cevt-mn10300.cGeert Uytterhoeven
Move the static inline function setup_jiffies_interrupt() from <asm/timex.h> to arch/mn10300/kernel/cevt-mn10300.c, which is its only callsite. This allows to remove the inclusion of <asm/hardirq.h> and <linux/irq.h> from <asm/timex.h> and <unit/timex.h>, fixing include hell like: include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:46:42: error: division by zero in #if ... make[4]: *** [arch/mn10300/kernel/asm-offsets.s] Error 1 and (after a quick hack for the above by defining CLOCK_TICK_RATE in <linux/jiffies.h>): In file included from include/linux/notifier.h:15:0, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:718, from include/linux/gfp.h:4, from include/linux/irq.h:20, from arch/mn10300/unit-asb2303/include/unit/timex.h:15, from arch/mn10300/include/asm/timex.h:15, from include/linux/timex.h:174, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, include/linux/srcu.h:55:22: error: field 'work' has incomplete type As a consequence, we do need a few more inclusions of <asm/irq.h>, namely in arch/mn10300/unit-asb2303/smc91111.c and arch/mn10300/unit-asb2305/unit-init.c. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fix from Chris Metcalf: "This is a single change to fix backtracing in big-endian mode." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: big-endian: properly bswap instruction bundles when backtracing
2012-07-11Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: - multiple omap2+ bug fixes - a regression on ux500 dt support - a build failure on shmobile * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n ARM: ux500: Over-ride the DT device naming scheme for pinctrl ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set of: address: Don't fail a lookup just because a node has no reg property ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
2012-07-11MN10300: Fix a missing semicolonDavid Howells
The declaration of arch_release_thread_info() needs a semicolon. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11Merge branch 'for-upstream-master' of git://github.com/agraf/linux-2.6Avi Kivity
PPC fix from Alex Graf: "It contains an important bug fix which can lead to guest freezes when using PAPR guests with PR KVM." * 'for-upstream-master' of git://github.com/agraf/linux-2.6: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11powerpc/kvm: Fix "PR" KVM implementation of H_CEDEBenjamin Herrenschmidt
H_CEDE should enable the vcpu's MSR:EE bit. It does on "HV" KVM (it's burried in the assembly code though) and as far as I can tell, qemu does it as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-10Merge tag 'fixes-for-v3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yes, this is a *LATE* GPIO pull request with fixes for v3.5. Grant moved across the planet and accidentally fell off the grid, so he asked me to take over the GPIO merges for a while 10 days ago. Since then I went over the archives and collected this pile of fixes, and pulled two of them from the TI maintainer Kevin Hilman. Then waited for them to at least hit linux-next once or twice." GPIO fixes for v3.5: - Invalid context restore on bank 0 for OMAP driver in runtime suspend/resume cycle - Check for NULL platform data in sta-2x11 driver - Constrain selection of the V1 MSM GPIO driver to applicable platforms (Kconfig issue) - Make sure the correct output value is set in the wm8994 driver - Export devm_gpio_request_one() so it can be used in modules. Apparently some in-kernel modules can be configured to use this leading to breakage. - Check that the GPIO is valid in the lantiq driver - Fix the flag bits introduced for v3.5, so they don't overlap - Fix a device tree intialization bug for imx21-compatible devices - Carry over the OF node to the TPS65910 GPIO chip struct * tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65910: initialize of_node of gpio_chip gpio/mxc: make irqs work for fsl,imx21-gpio devices gpio: fix bits conflict for gpio flags mips: pci-lantiq: Fix check for valid gpio gpio: export devm_gpio_request_one gpiolib: wm8994: Pay attention to the value set when enabling as output gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs gpio-sta2x11: don't use pdata if null gpio/omap: fix invalid context restore of gpio bank-0 gpio/omap: fix irq loss while in idle with debounce on
2012-07-10Merge tag 'omap-fixes-for-v3.5-rc6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren <tony@atomide.com>: Here is one PM regression fix and a defconfig change to disable echi-omap because the driver currently causes issues with PM. This annoys Kevin as it makes it harder for him to validate that PM is working. The proper fixes for the echi-omap are being discussed, but looks like it will not be properly working with PM until in v3.7. * tag 'omap-fixes-for-v3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-10powerpc/numa: Avoid stupid uninitialized warning from gccBenjamin Herrenschmidt
Newer gcc are being a bit blind here (it's pretty obvious we don't reach the code path using the array if we haven't initialized the pointer) but none of that is performance critical so let's just silence it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10powerpc: Fix build of some debug irq codeBenjamin Herrenschmidt
There was a typo, checking for CONFIG_TRACE_IRQFLAG instead of CONFIG_TRACE_IRQFLAGS causing some useful debug code to not be built This in turns causes a build error on BookE 64-bit due to incorrect semicolons at the end of a couple of macros, so let's fix that too Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@vger.kernel.org [v3.4]
2012-07-10powerpc: More fixes for lazy IRQ vs. idleBenjamin Herrenschmidt
Looks like we still have issues with pSeries and Cell idle code vs. the lazy irq state. In fact, the reset fixes that went upstream are exposing the problem more by causing BUG_ON() to trigger (which this patch turns into a WARN_ON instead). We need to be careful when using a variant of low power state that has the side effect of turning interrupts back on, to properly set all the SW & lazy state to look as if everything is enabled before we enter the low power state with MSR:EE off as we will return with MSR:EE on. If not, we have a discrepancy of state which can cause things to go very wrong later on. This patch moves the logic into a helper and uses it from the pseries and cell idle code. The power4/970 idle code already got things right (in assembly even !) so I'm not touching it. The power7 "bare metal" idle code is subtly different and correct. Remains PA6T and some hypervisor based Cell platforms which have questionable code in there, but they are mostly dead platforms so I'll fix them when I manage to get final answers from the respective maintainers about how the low power state actually works on them. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@vger.kernel.org [v3.4]
2012-07-09ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable itKevin Hilman
The EHCI driver is not stable enough to be enabled by default. In v3.5, it has at least the following problems: - warning dump during bootup - hang during suspend - prevents CORE powerdomain from entering retention during idle (even when no USB devices connected.) This demonstrates that this driver has not been thoroughly tested and therfore should not be enabled in the default defconfig. In addition, the problems above cause new PM regressions which need be addressed before this driver should be enabled in the default defconfig. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-07Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Last merge window, we had some updates from Al cleaning up the signal restart handling. These have caused some problems on ARM, and while Al has some fixes, we have some concerns with Al's patches but we've been unsuccesful with discussing this. We have got to the point where we need to do something, and we've decided that the best solution is to revert the appropriate commits until Al is able to reply to us. Also included here are four patches to fix warnings that I've noticed in my build system, and one fix for kprobes test code." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix warning caused by wrongly typed arm_dma_limit ARM: fix warnings about atomic64_read ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6 ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK" ARM: 7442/1: Revert "remove unused restart trampoline" ARM: fix set_domain() macro ARM: fix mach-versatile/pci.c warning
2012-07-06ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=nMagnus Damm
Fix build error in the case of SMP=y but ARCH_SH73A0=n introduced by: 9601e87 ARM: shmobile: fix smp build The use of of_machine_is_compatible() will link in the the SoC-specific symbols: "sh73a0_get_core_count", "sh73a0_smp_prepare_cpus", "sh73a0_secondary_init" and "sh73a0_boot_secondary". This patch adds an ugly #ifdef wrapper as a stop-gap solution. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Tested-by: Simon Horman <horms@verge.net.au> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06Merge branch 'ux500/fixes-3.5' into fixesArnd Bergmann
From Lee Jones <lee.jones@linaro.org>: * ux500/fixes-3.5: ARM: ux500: Over-ride the DT device naming scheme for pinctrl ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set of: address: Don't fail a lookup just because a node has no reg property I ended up rebasing Lee's branch on 3.5-rc5 because we have more patches lined for 3.6 that depend on them, and I want to keep all branches in arm-soc be based on -rc releases rather than random commits in the upstream history. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06ARM: ux500: Over-ride the DT device naming scheme for pinctrlLee Jones
When pin control mapping tables are written the registered device name is supplied for use in name-based searches within the pinctrl driver. In the case of the DB8500 the string "pinctrl-db8500" is used. However, when we register the driver with Device Tree, its naming convention uses something that looks more like "pinctrl.2". To work around the device naming inconsistencies between devices registered via platform code and the ones registered by Device Tree, we use AUXDATA to over-ride the Device Tree naming scheme. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-06ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not setLee Jones
When MACH_UX500_DT and all related Device Tree configurations are forced off the warning and error below prevent the kernel from compiling. This simple patch fixes both issues and allows for full build and boot of ST-Ericsson's low-cost development board, Snowball. Warnings fixed: arch/arm/mach-ux500/board-mop500.c:680:32: warning: ‘snowball_of_platform_devs’ defined but not used Errors fixed: arch/arm/mach-ux500/timer.c: In function ‘ux500_timer_init’: arch/arm/mach-ux500/timer.c:66:3: error: implicit declaration of function ‘of_find_matching_node’ arch/arm/mach-ux500/timer.c:66:6: warning: assignment makes pointer from integer without a cast Cc: stable@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-06Merge branch 'for_3.5/fixes/pm-3' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2012-07-05ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timerPaul Walmsley
Kevin discovered that commit c8d82ff68fb6873691536cf33021977efbf5593c ("ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database") broke CORE idle on OMAP3. This prevents device low power states. The root cause is that the 32K sync timer IP block does not support smart-idle mode[1], and so the hwmod code keeps the IP block in no-idle mode while it is active. This in turn prevents the WKUP clockdomain from transitioning to idle. There is a hardcoded sleep dependency that prevents the CORE_L3 and CORE_CM clockdomains from transitioning to idle when the WKUP clockdomain is active[2], so the chip cannot enter any device low power states. It turns out that there is no need to take the 32k sync timer out of idle. The IP block itself probably does not have any native idle handling at all, due to its simplicity. Furthermore, the PRCM will never request target idle for this IP block while the kernel is running, due to the sleep dependency that prevents the WKUP clockdomain from idling while the CORE_L3 clockdomain is active. So we can safely leave the 32k sync timer in target-force-idle mode, even while we continue to access it. This workaround is implemented by defining a new clockdomain flag, CLKDM_ACTIVE_WITH_MPU, that indicates that the clockdomain is guaranteed to be active whenever the MPU is inactive. If an IP block's main functional clock exists inside this clockdomain, and the IP block does not support smart-idle modes, then the hwmod code will place the IP block into target force-idle mode even when enabled. The WKUP clockdomains on OMAP3/4 are marked with this flag. (On OMAP2xxx, no OCP header existed on the 32k sync timer.) Other clockdomains also should be marked with this flag, but those changes are deferred until a later merge window, to create a minimal fix. Another theoretically clean fix for this problem would be to implement PM runtime-based control for 32k sync timer accesses. These PM runtime calls would need to located in a custom clocksource, since the 32k sync timer is currently used as an MMIO clocksource. But in practice, there would be little benefit to doing so; and there would be some cost, due to the addition of unnecessary lines of code and the additional CPU overhead of the PM runtime and hwmod code - unnecessary in this case. Another possible fix would have been to modify the pm34xx.c code to force the IP block idle before entering WFI. But this would not have been an acceptable approach: we are trying to remove this type of centralized IP block idle control from the PM code. This patch is a collaboration between Kevin Hilman <khilman@ti.com> and Paul Walmsley <paul@pwsan.com>. Thanks to Vaibhav Hiremath <hvaibhav@ti.com> for providing comments on an earlier version of this patch. Thanks to Tero Kristo <t-kristo@ti.com> for identifying a bug in an earlier version of this patch. Thanks to Benoît Cousson <b-cousson@ti.com> for identifying some bugs in several versions of this patch and for implementation comments. References: 1. Table 16-96 "REG_32KSYNCNT_SYSCONFIG" of the OMAP34xx TRM Rev. ZU (SWPU223U), available from: http://www.ti.com/pdfs/wtbu/OMAP34x_ES3.1.x_PUBLIC_TRM_vzU.zip 2. Table 4-72 "Sleep Dependencies" of the OMAP34xx TRM Rev. ZU (SWPU223U) 3. ibid. Cc: Tony Lindgren <tony@atomide.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-07-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Small fixes on multiple ARM platforms - A build regression from a previous fix on dove and mv78xx0 - Two fixes for recently (3.5-rc1) changed mmp/pxa code - multiple omap2+ bug fixes - two trivial fixes for i.MX - one v3.5 regression for mxs" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: apx4devkit: fix FEC enabling PHY clock ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4 ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks ARM: Orion: Fix WDT compile for Dove and MV78xx0 ARM: mmp: remove mach/gpio-pxa.h ARM: imx: assert SCC gate stays enabled ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure ARM: imx27_visstrim_m10: Do not include <asm/system.h> ARM: pxa: hx4700: Fix basic suspend/resume
2012-07-05Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fix from Marcelo Tosatti: "Memory leak and oops on the x86 mmu code, and sanitization of the KVM_IRQFD ioctl." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: fix shrinking page from the empty mmu KVM: fix fault page leak KVM: Sanitize KVM_IRQFD flags KVM: Add missing KVM_IRQFD API documentation KVM: Pass kvm_irqfd to functions
2012-07-05mips: pci-lantiq: Fix check for valid gpioRoland Stigge
This patch fixes two checks for valid gpio number, formerly (wrongly) considering zero as invalid, now using gpio_is_valid(). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05ARM: fix warning caused by wrongly typed arm_dma_limitRussell King
arch/arm/mm/init.c: In function 'arm_memblock_init': arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast by fixing the typecast in its definition when DMA_ZONE is disabled. This was missed in 4986e5c7c (ARM: mm: fix type of the arm_dma_limit global variable). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: fix warnings about atomic64_readRussell King
Fix: net/netfilter/xt_connbytes.c: In function 'connbytes_mt': net/netfilter/xt_connbytes.c:43: warning: passing argument 1 of 'atomic64_read' discards qualifiers from pointer target type ... by adding the missing const. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6Rabin Vincent
'sub pc, pc, #1b-2b+8-2' results in address<1:0> == '10'. sub pc, pc, #const (== ADR pc, #const) performs an interworking branch (BXWritePC()) on ARMv7+ and a simple branch (BranchWritePC()) on earlier versions. In ARM state, BXWritePC() is UNPREDICTABLE when address<1:0> == '10'. In ARM state on ARMv6+, BranchWritePC() ignores address<1:0>. Before ARMv6, BranchWritePC() is UNPREDICTABLE if address<1:0> != '00' So the instruction is UNPREDICTABLE both before and after v6. Acked-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05Merge tag 'omap-fixes-for-v3.5-rc5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes PM related fixes for omaps mostly to get suspend/resume working again. * tag 'omap-fixes-for-v3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4 ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-05Merge branch 'mxs/fixes-for-3.5' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes * 'mxs/fixes-for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: apx4devkit: fix FEC enabling PHY clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-05ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailableWill Deacon
We currently return -EPERM if the user requests mode exclusion that is not supported by the CPU. This looks pretty confusing from userspace and is inconsistent with other architectures (ppc, x86). This patch returns -EOPNOTSUPP instead. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK"Will Deacon
This reverts commit 6b5c8045ecc7e726cdaa2a9d9c8e5008050e1252. Conflicts: arch/arm/kernel/ptrace.c The new syscall restarting code can lead to problems if we take an interrupt in userspace just before restarting the svc instruction. If a signal is delivered when returning from the interrupt, the TIF_SYSCALL_RESTARTSYS will remain set and cause any syscalls executed from the signal handler to be treated as a restart of the previously interrupted system call. This includes the final sigreturn call, meaning that we may fail to exit from the signal context. Furthermore, if a system call made from the signal handler requires a restart via the restart_block, it is possible to clear the thread flag and fail to restart the originally interrupted system call. The right solution to this problem is to perform the restarting in the kernel, avoiding the possibility of handling a further signal before the restart is complete. Since we're almost at -rc6, let's revert the new method for now and aim for in-kernel restarting at a later date. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7442/1: Revert "remove unused restart trampoline"Will Deacon
This reverts commit fa18484d0947b976a769d15c83c50617493c81c1. We need the restart trampoline back so that we can revert a related problematic patch 6b5c8045ecc7e726cdaa2a9d9c8e5008050e1252 ("arm: new way of handling ERESTART_RESTARTBLOCK"). Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: fix set_domain() macroRussell King
Avoid polluting drivers with a set_domain() macro, which interferes with structure member names: drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c:294:33: error: macro "set_domain" passed 2 arguments, but takes just 1 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05Merge tag 'omap-fixes-b-for-3.5rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes A few more OMAP fixes for 3.5-rc. These fix some bugs with power management and McBSP.
2012-07-05ARM: apx4devkit: fix FEC enabling PHY clockLauri Hintsala
Ethernet stopped to work after mxs clk framework change. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-04ARM: fix mach-versatile/pci.c warningRussell King
arch/arm/mach-versatile/pci.c: In function 'versatile_map_irq': arch/arm/mach-versatile/pci.c:342: warning: unused variable 'devslot' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>