| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Split kernel large page mappings into 4k mappings in case debug
pagealloc is enabled again. This got accidentally removed by commit
bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
- Fix error handling in KVM's sthyi handling
- Add missing include to s390's uapi ptrace.h
- Update defconfigs
* tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: add missing linux/const.h include
KVM: s390: fix sthyi error handling
s390: update defconfigs
s390/vmem: split pages when debug pagealloc is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:
- SoCFPGA: Fix incorrect I2C property for SCL signal
- Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
RZ/V2L.
- Juno/Vexpress: remove a dangling symlink
- at91: sam9x60 SoC detection compatible strings
- nspire: Fix arm primecell compatible string
On the NXP i.MX platform, there multiple issues that get addressed:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable
disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
bus_power_dev child, so that runtime PM can translate into the
necessary GPC power domain action
On the driver side, there are two fixes for tegra memory controller
drivers addressing regressions from the merge window, a couple of
minor correctness fixes for SCMI and SMCCC firmware, as well as a
build fix for an lcd backlight driver"
* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
backlight: corgi_lcd: fix missing prototype
memory: tegra: make icc_set_bw return zero if BWMGR not supported
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
ARM: dts: at91: sam9x60: fix the SOC detection
ARM: dts: nspire: Fix arm primecell compatible string
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
...
|
|
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Adrian Reber reported the following CRIU build bug after
commit b8af5999779d ("s390/ptrace: make all psw related
defines also available for asm"):
compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
523 | if (psw->mask & PSW_MASK_RI) {
| ^~~~~~~~~~~
Add the missing linux/const.h include to fix this.
Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes: b8af5999779d ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes for build system, builtin cmdline handling, bpf and
{copy, clear}_user, together with a trivial cleanup"
* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
LoongArch: BPF: Fix check condition to call lu32id in move_imm()
LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
LoongArch: Fix return value underflow in exception path
LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
LoongArch: Fix module relocation error with binutils 2.41
LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'
|
|
Stuff CR0 and/or CR4 to be compliant with a restricted guest if and only
if KVM itself is not configured to utilize unrestricted guests, i.e. don't
stuff CR0/CR4 for a restricted L2 that is running as the guest of an
unrestricted L1. Any attempt to VM-Enter a restricted guest with invalid
CR0/CR4 values should fail, i.e. in a nested scenario, KVM (as L0) should
never observe a restricted L2 with incompatible CR0/CR4, since nested
VM-Enter from L1 should have failed.
And if KVM does observe an active, restricted L2 with incompatible state,
e.g. due to a KVM bug, fudging CR0/CR4 instead of letting VM-Enter fail
does more harm than good, as KVM will often neglect to undo the side
effects, e.g. won't clear rmode.vm86_active on nested VM-Exit, and thus
the damage can easily spill over to L1. On the other hand, letting
VM-Enter fail due to bad guest state is more likely to contain the damage
to L2 as KVM relies on hardware to perform most guest state consistency
checks, i.e. KVM needs to be able to reflect a failed nested VM-Enter into
L1 irrespective of (un)restricted guest behavior.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Fixes: bddd82d19e2e ("KVM: nVMX: KVM needs to unset "unrestricted guest" VM-execution control in vmcs02 if vmcs12 doesn't set it")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows
dereferencing memslots during WRMSR emulation, drop the requirement that
"next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a
better fix than avoiding the pastpath, but at the time it was thought that
accessing SRCU-protected data in the fastpath was a one-off edge case.
This reverts commit 5c30e8101e8d5d020b1d7119117889756a6ed713.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Temporarily acquire kvm->srcu for read when potentially emulating WRMSR in
the VM-Exit fastpath handler, as several of the common helpers used during
emulation expect the caller to provide SRCU protection. E.g. if the guest
is counting instructions retired, KVM will query the PMU event filter when
stepping over the WRMSR.
dump_stack+0x85/0xdf
lockdep_rcu_suspicious+0x109/0x120
pmc_event_is_allowed+0x165/0x170
kvm_pmu_trigger_event+0xa5/0x190
handle_fastpath_set_msr_irqoff+0xca/0x1e0
svm_vcpu_run+0x5c3/0x7b0 [kvm_amd]
vcpu_enter_guest+0x2108/0x2580
Alternatively, check_pmu_event_filter() could acquire kvm->srcu, but this
isn't the first bug of this nature, e.g. see commit 5c30e8101e8d ("KVM:
SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"). Providing
protection for the entirety of WRMSR emulation will allow reverting the
aforementioned commit, and will avoid having to play whack-a-mole when new
uses of SRCU-protected structures are inevitably added in common emulation
helpers.
Fixes: dfdeda67ea2d ("KVM: x86/pmu: Prevent the PMU from counting disallowed events")
Reported-by: Greg Thelen <gthelen@google.com>
Reported-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use vmread_error() to report VM-Fail on VMREAD for the "asm goto" case,
now that trampoline case has yet another wrapper around vmread_error() to
play nice with instrumentation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721235637.2345403-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Mark vmread_error_trampoline() as noinstr, and add a second trampoline
for the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=n case to enable instrumentation
when handling VM-Fail on VMREAD. VMREAD is used in various noinstr
flows, e.g. immediately after VM-Exit, and objtool rightly complains that
the call to the error trampoline leaves a no-instrumentation section
without annotating that it's safe to do so.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0xc9:
call to vmread_error_trampoline() leaves .noinstr.text section
Note, strictly speaking, enabling instrumentation in the VM-Fail path
isn't exactly safe, but if VMREAD fails the kernel/system is likely hosed
anyways, and logging that there is a fatal error is more important than
*maybe* encountering slightly unsafe instrumentation.
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721235637.2345403-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As was attempted commit 14717e203186 ("kvm: Conditionally register IRQ
bypass consumer"): "if we don't support a mechanism for bypassing IRQs,
don't register as a consumer. Initially this applied to AMD processors,
but when AVIC support was implemented for assigned devices,
kvm_arch_has_irq_bypass() was always returning true.
We can still skip registering the consumer where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
This eliminates meaningless dev_info()s when the connect fails
between producer and consumer", such as on Linux hosts where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
Cc: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Yong He <alexyonghe@tencent.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217379
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20230724111236.76570-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The pid_table of ipiv is the persistent memory allocated by
per-vcpu, which should be counted into the memory cgroup.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Message-Id: <CAPm50aLxCQ3TQP2Lhc0PX3y00iTRg+mniLBqNDOC=t9CLxMwwA@mail.gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The code was blindly assuming that kvm_cpu_get_interrupt never returns -1
when there is a pending interrupt.
While this should be true, a bug in KVM can still cause this.
If -1 is returned, the code before this patch was converting it to 0xFF,
and 0xFF interrupt was injected to the guest, which results in an issue
which was hard to debug.
Add WARN_ON_ONCE to catch this case and skip the injection
if this happens again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230726135945.260841-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the APICv is inhibited, the irr_pending optimization is used.
Therefore, when kvm_apic_update_irr sets bits in the IRR,
it must set irr_pending to true as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230726135945.260841-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If APICv is inhibited, then IPIs from peer vCPUs are done by
atomically setting bits in IRR.
This means, that when __kvm_apic_update_irr copies PIR to IRR,
it has to modify IRR atomically as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230726135945.260841-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
added cache handling for store hypervisor info. This also changed the
possible return code for sthyi_fill().
Instead of only returning a condition code like the sthyi instruction would
do, it can now also return a negative error value (-ENOMEM). handle_styhi()
was not changed accordingly. In case of an error, the negative error value
would incorrectly injected into the guest PSW.
Add proper error handling to prevent this, and update the comment which
describes the possible return values of sthyi_fill().
Fixes: 9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20230727182939.2050744-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"11 hotfixes. Five are cc:stable and the remainder address post-6.4
issues or aren't considered serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: fix hardware poison check in unpoison_memory()
proc/vmcore: fix signedness bug in read_from_oldmem()
mailmap: update remaining active codeaurora.org email addresses
mm: lock VMA in dup_anon_vma() before setting ->anon_vma
mm: fix memory ordering for mm_lock_seq and vm_lock_seq
scripts/spelling.txt: remove 'thead' as a typo
mm/pagewalk: fix EFI_PGT_DUMP of espfix area
shmem: minor fixes to splice-read implementation
tmpfs: fix Documentation of noswap and huge mount options
Revert "um: Use swap() to make code cleaner"
mm/damon/core-test: initialise context before test in damon_test_set_attrs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A couple of SME updates for recent fixes (one of which went to
stable): reverting the flushing of the SME hardware state along with
the thread flushing and making sure we have the correct vector length
before reallocating.
- An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs"
is 0 (the spec reports the number of IDs in the mapping range minus
1).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()
arm64/sme: Set new vector length before reallocating
arm64/fpsimd: Don't flush SME register hardware state along with thread
|
|
In the current configuration, cpu_has_lsx and cpu_has_lasx cannot be
constants. So cleanup the __builtin_constant_p() checking to reduce the
complexity.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As the code comment says, the initial aim is to reduce one instruction
in some corner cases, if bit[51:31] is all 0 or all 1, no need to call
lu32id. That is to say, it should call lu32id only if bit[51:31] is not
all 0 and not all 1. The current code always call lu32id, the result is
right but the logic is unexpected and wrong, fix it.
Cc: stable@vger.kernel.org # 6.1
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Reported-by: Colin King (gmail) <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently nettrace does not work on LoongArch due to missing
bpf_probe_read{,str}() support, with the error message:
ERROR: failed to load kprobe-based eBPF
ERROR: failed to load kprobe-based bpf
According to commit 0ebeea8ca8a4d1d ("bpf: Restrict bpf_probe_read{,
str}() only to archs where they work"), we only need to select
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support,
because LoongArch does have non-overlapping address ranges for kernel
and userspace.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch fixes an underflow issue in the return value within the
exception path, specifically at .Llt8 when the remaining length is less
than 8 bytes.
Cc: stable@vger.kernel.org
Fixes: 8941e93ca590 ("LoongArch: Optimize memory ops (memset/memcpy/memmove)")
Reported-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On FDT systems these command line processing are already taken care of
by early_init_dt_scan_chosen(). Add similar handling to the ACPI (non-
FDT) code path to allow these config options to work for ACPI (non-FDT)
systems too.
Signed-off-by: Zhihong Dong <donmor3000@hotmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Binutils 2.41 enables linker relaxation by default, but the kernel
module loader doesn't support that, so just disable it. Otherwise we
get such an error when loading modules:
"Unknown relocation type 102"
As an alternative, we could add linker relaxation support in the kernel
module loader. But it is relatively large complexity that may or may not
bring a similar gain, and we don't really want to include this linker
pass in the kernel.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a port of commit 4fe4a6374c4db9ae2b ("MIPS: Only fiddle with
CHECKFLAGS if `need-compiler'") to LoongArch.
We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_LOONGARCH variable, not set for targets such
as `distclean', etc. that neither include `.config' nor use the compiler.
Starting from commit 805b2e1d427aab4 ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags. If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned.
It doesn't cause problems on LoongArch now. But as a guard we replace
the check for CONFIG_LOONGARCH with one for `need-compiler' instead, so
as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This reverts commit 9b0da3f22307af693be80f5d3a89dc4c7f360a85.
The sigio.c is clearly user space code which is handled by
arch/um/scripts/Makefile.rules (see USER_OBJS rule).
The above mentioned commit simply broke this agreement,
we may not use Linux kernel internal headers in them without
thorough thinking.
Hence, revert the wrong commit.
Link: https://lkml.kernel.org/r/20230724143131.30090-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307212304.cH79zJp1-lkp@intel.com/
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Richard Weinberger <richard@nod.at>
Cc: Yang Guang <yang.guang5@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts fix for v6.5
- Fix incorrect I2C property for SCL signal
* tag 'socfpga_dts_fix_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix incorrect I2C property for SCL signal
Link: https://lore.kernel.org/r/20230724145617.887443-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.5
- Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L.
* tag 'renesas-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690463347.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The corgi_lcd_limit_intensity() function is called from platform
and defined in a driver, but the driver does not see the declaration:
drivers/video/backlight/corgi_lcd.c:434:6: error: no previous prototype for 'corgi_lcd_limit_intensity' [-Werror=missing-prototypes]
434 | void corgi_lcd_limit_intensity(int limit)
Move the prototype into a header that can be included from both
sides to shut up the warning.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Changes from before and new defaults:
- enable USER_EVENTS
- enable FAULT_INJECTION_CONFIGFS (debug only)
- disable FW_LOADER
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
the kernel crashes early during boot when debug pagealloc is enabled:
mem auto-init: stack:off, heap alloc:off, heap free:off
addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630
[..]
Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e
00000000001325fc: eb880002000c srlg %r8,%r8,2
#0000000000132602: b2210051 ipte %r5,%r1,%r0,0
>0000000000132606: b90400d1 lgr %r13,%r1
000000000013260a: 41605008 la %r6,8(%r5)
000000000013260e: a7db1000 aghi %r13,4096
0000000000132612: b221006d ipte %r6,%r13,%r0,0
0000000000132616: e3d0d0000171 lay %r13,4096(%r13)
Call Trace:
__kernel_map_pages+0x14e/0x320
__free_pages_ok+0x23a/0x5a8)
free_low_memory_core_early+0x214/0x2c8
memblock_free_all+0x28/0x58
mem_init+0xb6/0x228
mm_core_init+0xb6/0x3b0
start_kernel+0x1d2/0x5a8
startup_continue+0x36/0x40
Kernel panic - not syncing: Fatal exception: panic_on_oops
This is caused by using large mappings on machines with EDAT1/EDAT2. Add
the code to split the mappings into 4k pages if debug pagealloc is enabled
by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel
command line option.
Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.
Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We recently changed the fpsimd thread flush to flush the physical SME
state as well as the thread state for the current thread. Unfortunately
this leads to intermittent corruption in interaction with the lazy
FPSIMD register switching. When under heavy load such as can be
triggered by the startup phase of fp-stress it is possible that the
current thread may not be scheduled prior to returning to userspace, and
indeed we may end up returning to the last thread that was scheduled on
the PE without ever exiting the kernel to any other task. If that
happens then we will not reload the register state from memory, leading
to loss of any SME register state.
Since this was purely an attempt to defensively close off potential
problems revert the change.
Fixes: af3215fd0230 ("arm64/fpsimd: Exit streaming mode when flushing tasks")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230724-arm64-dont-flush-smstate-v1-1-9a8b637ace6c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit c4e34dd99f2e ("x86: simplify load_unaligned_zeropad()
implementation") changes how exceptions around load_unaligned_zeropad()
handled. The kernel now uses the fault_address in fixup_exception() to
verify the address calculations for the load_unaligned_zeropad().
It works fine for #PF, but breaks on #VE since no fault address is
passed down to fixup_exception().
Propagating ve_info.gla down to fixup_exception() resolves the issue.
See commit 1e7769653b06 ("x86/tdx: Handle load_unaligned_zeropad()
page-cross to a shared page") for more context.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Michael Kelley <mikelley@microsoft.com>
Fixes: c4e34dd99f2e ("x86: simplify load_unaligned_zeropad() implementation")
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
- Fix the build when using the toolchain in Debian unstable.
* tag 'm68k-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix invalid .section syntax
|
|
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names start with 'tci' instead of 'tgi'.
Replace the below overflow/underflow interrupt names:
- tgiv0->tciv0
- tgiv1->tciv1
- tgiu1->tciu1
- tgiv2->tciv2
- tgiu2->tciu2
- tgiv3->tciv3
- tgiv4->tciv4
- tgiv6->tciv6
- tgiv7->tciv7
- tgiv8->tciv8
- tgiu8->tciu8
Fixes: 26336d66d021 ("arm64: dts: renesas: r9a07g044: Add MTU3a node")
Fixes: dd123dd01def ("arm64: dts: renesas: r9a07g054: Add MTU3a node")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230724091927.123847-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Zen 2 errata fix from Borislav Petkov:
"Fix an issue on AMD Zen2 processors called Zenbleed.
The bug manifests itself as a data corruption issue when executing
VZEROUPPER under certain microarchitectural conditions"
* tag 'x86_bugs_zenbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Add a Zenbleed fix
x86/cpu/amd: Move the errata checking functionality up
|
|
gas supports several different forms for .section for ELF targets,
including:
.section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
and:
.section "NAME"[, #FLAGS...]
In several places we use a mix of these two forms:
.section NAME, #FLAGS...
A current development snapshot of binutils (2.40.50.20230611) treats
this mixed syntax as an error.
Change to consistently use:
.section NAME, "FLAGS"
as is used elsewhere in the kernel.
Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
Signed-off-by: Ben Hutchings <benh@debian.org>
Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Two fixes for asynchronous destroy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Reinstate support for little endian ELFv1 binaries, which it turns
out still exist in the wild.
- Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it
lead to dead code generation and seemed to trigger compiler bugs in
some edge cases.
- Fix a deadlock in the pseries VAS code, between live migration and
the driver's mmap handler.
- Disable KCOV instrumentation in the powerpc KASAN code.
Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren
Myneni, Russell Currey, and Uwe Kleine-König.
* tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
powerpc/kasan: Disable KCOV in KASAN code
powerpc/512x: lpbfifo: Convert to platform remove callback returning void
powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
check to fault handler to prevent error handling for return values
that don't indicate an error
- Use kfree_sensitive() instead of kfree() in paes crypto code to clear
memory that may contain keys before freeing it
- Fix reply buffer size calculation for CCA replies in zcrypt device
driver
* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: fix reply buffer calculations for CCA replies
s390/crypto: use kfree_sensitive() instead of kfree()
s390/mm: fix per vma lock fault handling
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and
punted directly (eg via DRAIN) (me)
- Capability check fix (Ondrej)
- Regression fix for the mmap changes that went into 6.4, which
apparently broke IA64 (Helge)
* tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux:
ia64: mmap: Consider pgoff when searching for free mapping
io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
io_uring: don't audit the capability check in io_uring_create()
|
|
Unlike Intel's Enhanced IBRS feature, AMD's Automatic IBRS does not
provide protection to processes running at CPL3/user mode, see section
"Extended Feature Enable Register (EFER)" in the APM v2 at
https://bugzilla.kernel.org/attachment.cgi?id=304652
Explicitly enable STIBP to protect against cross-thread CPL3
branch target injections on systems with Automatic IBRS enabled.
Also update the relevant documentation.
Fixes: e7862eda309e ("x86/cpu: Support AMD Automatic IBRS")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230720194727.67022-1-kim.phillips@amd.com
|
