summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2023-10-17vgacon: remove screen_info dependencyArnd Bergmann
The vga console driver is fairly self-contained, and only used by architectures that explicitly initialize the screen_info settings. Chance every instance that picks the vga console by setting conswitchp to call a function instead, and pass a reference to the screen_info there. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Khalid Azzi <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon, arch/*: remove unused screen_info definitionsArnd Bergmann
A number of architectures either kept the screen_info definition for historical purposes as it used to be required by the generic VT code, or they copied it from another architecture in order to build the VGA console driver in an allmodconfig build. The mips definition is used by some platforms, but the initialization on jazz is not needed. Now that vgacon no longer builds on these architectures, remove the stale definitions and initializations. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-5-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17dummycon: limit Arm console size hack to footbridgeArnd Bergmann
The dummycon default console size used to be determined by architecture, but now this is a Kconfig setting on everything except ARM. Tracing this back in the historic git trees, this was used to match the size of VGA console or VGA framebuffer on early machines, but nowadays that code is no longer used, except probably on the old footbridge/netwinder since that is the only one that supports vgacon. On machines with a framebuffer, booting with DT so far results in always using the hardcoded 80x30 size in dummycon, while on ATAGS the setting can come from a bootloader specific override. Both seem to be worse choices than the Kconfig setting, since the actual text size for fbcon also depends on the selected font. Make this work the same way as everywhere else and use the normal Kconfig setting, except for the footbridge with vgacon, which keeps using the traditional code. If vgacon is disabled, footbridge can also ignore the setting. This means the screen_info only has to be provided when either vgacon or EFI are enabled now. To limit the amount of surprises on Arm, change the Kconfig default to the previously used 80x30 setting instead of the usual 80x25. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-4-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon: rework screen_info #ifdef checksArnd Bergmann
On non-x86 architectures, the screen_info variable is generally only used for the VGA console where supported, and in some cases the EFI framebuffer or vga16fb. Now that we have a definite list of which architectures actually use it for what, use consistent #ifdef checks so the global variable is only defined when it is actually used on those architectures. Loongarch and riscv have no support for vgacon or vga16fb, but they support EFI firmware, so only that needs to be checked, and the initialization can be removed because that is handled by EFI. IA64 has both vgacon and EFI, though EFI apparently never uses a framebuffer here. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Khalid Aziz <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-15Revert "x86/smp: Put CPUs into INIT on shutdown if possible"Linus Torvalds
This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the two subsequent fixes to it: 3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs") b1472a60a584 ("x86/smp: Don't send INIT to boot CPU") because it seems to result in hung machines at shutdown. Particularly some Dell machines, but Thomas says "The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs - at least that's what I could figure out from the various bug reports. I don't know which CPUs the DELL machines have, so I can't say it's a pattern. I agree with the revert for now" Ashok Raj chimes in: "There was a report (probably this same one), and it turns out it was a bug in the BIOS SMI handler. The client BIOS's were waiting for the lowest APICID to be the SMI rendevous master. If this is MeteorLake, the BSP wasn't the one with the lowest APIC and it triped here. The BIOS change is also being pushed to others for assimilation :) Server BIOS's had this correctly for a while now" and it does look likely to be some bad interaction between SMI and the non-BSP cores having put into INIT (and thus unresponsive until reset). Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429 Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/ Link: https://forum.artixlinux.org/index.php/topic,5997.0.html Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279 Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-10-15Merge tag 'powerpc-6.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix softlockup/crash when using hcall tracing - Fix pte_access_permitted() for PAGE_NONE on 8xx - Fix inverted pte_young() test in __ptep_test_and_clear_young() on 64-bit BookE - Fix unhandled math emulation exception on 85xx - Fix kernel crash on syscall return on 476 Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N Rao. * tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/47x: Fix 47x syscall return crash powerpc/85xx: Fix math emulation exception powerpc/64e: Fix wrong test in __ptep_test_and_clear_young() powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE powerpc/pseries: Remove unused r0 in the hcall tracing code powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
2023-10-15Merge tag 'smp-urgent-2023-10-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Ingo Molnar: "Fix a Longsoon build warning by harmonizing the arch_[un]register_cpu() prototypes between architectures" * tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu-hotplug: Provide prototypes for arch CPU registration
2023-10-14Merge tag 'x86-urgent-2023-10-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs, and fix kernel-doc build warnings" * tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Disable KASAN in apply_alternatives() x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs x86/resctrl: Fix kernel-doc warnings
2023-10-14Merge tag 'perf-urgent-2023-10-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Fix an LBR sampling bug" * tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Filter vsyscall addresses
2023-10-13Merge tag 'riscv-for-linus-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of build fixes - A fix to avoid mixing up user/kernel-mode breakpoints, which can manifest as a hang when mixing k/uprobes with other breakpoint sources - A fix to avoid double-allocting crash kernel memory - A fix for tracefs syscall name mangling, which was causing syscalls not to show up in tracefs - A fix to the perf driver to enable the hw events when selected, which can trigger a BUG on some userspace access patterns * tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: drivers: perf: Fix panic in riscv SBI mmap support riscv: Fix ftrace syscall handling which are now prefixed with __riscv_ RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK riscv: kdump: fix crashkernel reserving problem on RISC-V riscv: Remove duplicate objcopy flag riscv: signal: fix sigaltstack frame size checking riscv: errata: andes: Makefile: Fix randconfig build issue riscv: Only consider swbp/ss handlers for correct privileged mode riscv: kselftests: Fix mm build by removing testcases subdirectory
2023-10-12Merge tag 'net-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from CAN and BPF. We have a regression in TC currently under investigation, otherwise the things that stand off most are probably the TCP and AF_PACKET fixes, with both issues coming from 6.5. Previous releases - regressions: - af_packet: fix fortified memcpy() without flex array. - tcp: fix crashes trying to free half-baked MTU probes - xdp: fix zero-size allocation warning in xskq_create() - can: sja1000: always restart the tx queue after an overrun - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp - eth: nfp: avoid rmmod nfp crash issues - eth: octeontx2-pf: fix page pool frag allocation warning Previous releases - always broken: - mctp: perform route lookups under a RCU read-side lock - bpf: s390: fix clobbering the caller's backchain in the trampoline - phy: lynx-28g: cancel the CDR check work item on the remove path - dsa: qca8k: fix qca8k driver for Turris 1.x - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work() - eth: ixgbe: fix crash with empty VF macvlan list" * tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) rswitch: Fix imbalance phy_power_off() calling rswitch: Fix renesas_eth_sw_remove() implementation octeontx2-pf: Fix page pool frag allocation warning nfc: nci: assert requested protocol is valid af_packet: Fix fortified memcpy() without flex array. net: tcp: fix crashes trying to free half-baked MTU probes net/smc: Fix pos miscalculation in statistics nfp: flower: avoid rmmod nfp crash issues net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read ethtool: Fix mod state of verbose no_mask bitset net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() mctp: perform route lookups under a RCU read-side lock net: skbuff: fix kernel-doc typos s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp net/smc: Fix dependency of SMC on ISM ixgbe: fix crash with empty VF macvlan list net/mlx5e: macsec: use update_pn flag instead of PN comparation net: phy: mscc: macsec: reject PN update requests ...
2023-10-12Merge tag 'soc-fixes-6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "AngeloGioacchino Del Regno is stepping in as co-maintainer for the MediaTek SoC platform and starts by sending some dts fixes for the mt8195 platform that had been pending for a while. On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer, reflecting that Linus Walleij has been handling this on his own for the past few years. Generic RISC-V kernels are now marked as incompatible with the RZ/Five platform that requires custom hacks both for managing its DMA bounce buffers and for addressing low virtual memory. Finally, there is one bugfix for the AMDTEE firmware driver to prevent a use-after-free bug" * tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: IXP4xx MAINTAINERS entries arm64: dts: mediatek: mt8195: Set DSU PMU status to fail arm64: dts: mediatek: fix t-phy unit name arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
2023-10-12riscv: Fix ftrace syscall handling which are now prefixed with __riscv_Alexandre Ghiti
ftrace creates entries for each syscall in the tracefs but has failed since commit 08d0ce30e0e4 ("riscv: Implement syscall wrappers") which prefixes all riscv syscalls with __riscv_. So fix this by implementing arch_syscall_match_sym_name() which allows us to ignore this prefix. And also ignore compat syscalls like x86/arm64 by implementing arch_trace_is_compat_syscall(). Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231003182407.32198-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-12RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACKJiexun Wang
If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT are enabled simultaneously under RISC-V architecture, it will result in a compilation failure: arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack' 64 | void do_softirq_own_stack(void) | ^~~~~~~~~~~~~~~~~~~~ In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1, from arch/riscv/kernel/irq.c:15: ./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here 8 | static inline void do_softirq_own_stack(void) | ^~~~~~~~~~~~~~~~~~~~ After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK, compilation can be successful. Fixes: dd69d07a5a6c ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK") Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20230913052940.374686-1-wangjiexun@tinylab.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-12riscv: kdump: fix crashkernel reserving problem on RISC-VChen Jiahao
When testing on risc-v QEMU environment with "crashkernel=" parameter enabled, a problem occurred with the following message: [ 0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB) [ 0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __insert_resource+0x8e/0xd0 [ 0.000000] ra : insert_resource+0x28/0x4e [ 0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0 [ 0.000000] gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00 [ 0.000000] t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0 [ 0.000000] s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380 [ 0.000000] a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000 [ 0.000000] a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078 [ 0.000000] s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880 [ 0.000000] s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f [ 0.000000] s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00 [ 0.000000] t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Failed to add a Crash kernel resource at 177e00000 The crashkernel memory has been allocated successfully, whereas it failed to insert into iomem_resource. This is due to the unique reserving logic in risc-v arch specific code, i.e. crashk_res/crashk_low_res will be added into iomem_resource later in init_resources(), which is not aligned with current unified reserving logic in reserve_crashkernel_{generic,low}() and therefore leads to the failure of crashkernel reservation. Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE in init_resources() to fix above problem. Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation") Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com> Link: https://lore.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-12riscv: Remove duplicate objcopy flagSong Shuai
There are two duplicate `-O binary` flags when objcopying from vmlinux to Image/xipImage. RISC-V set `-O binary` flag in both OBJCOPYFLAGS in the top-level riscv Makefile and OBJCOPYFLAGS_* in the boot/Makefile, and the objcopy cmd in Kbuild would join them together. The `-O binary` flag is only needed for objcopying Image, so remove the OBJCOPYFLAGS in the top-level riscv Makefile. Fixes: c0fbcd991860 ("RISC-V: Build flat and compressed kernel images") Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230914091334.1458542-1-songshuaishuai@tinylab.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-12x86/alternatives: Disable KASAN in apply_alternatives()Kirill A. Shutemov
Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ] Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y") Reported-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com
2023-10-12riscv: signal: fix sigaltstack frame size checkingAndy Chiu
The alternative stack checking in get_sigframe introduced by the Vector support is not needed and has a problem. It is not needed as we have already validate it at the beginning of the function if we are already on an altstack. If not, the size of an altstack is always validated at its allocation stage with sigaltstack_size_valid(). Besides, we must only regard the size of an altstack if the handler of a signal is registered with SA_ONSTACK. So, blindly checking overflow of an altstack if sas_ss_size not equals to zero will check against wrong signal handlers if only a subset of signals are registered with SA_ONSTACK. Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector") Reported-by: Prashanth Swaminathan <prashanthsw@google.com> Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20230822164904.21660-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-11cpu-hotplug: Provide prototypes for arch CPU registrationRussell King (Oracle)
Provide common prototypes for arch_register_cpu() and arch_unregister_cpu(). These are called by acpi_processor.c, with weak versions, so the prototype for this is already set. It is generally not necessary for function prototypes to be conditional on preprocessor macros. Some architectures (e.g. Loongarch) are missing the prototype for this, and rather than add it to Loongarch's asm/cpu.h, do the job once for everyone. Since this covers everyone, remove the now unnecessary prototypes in asm/cpu.h, and therefore remove the 'static' from one of ia64's arch_register_cpu() definitions. [ tglx: Bring back the ia64 part and remove the ACPI prototypes ] Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1qkoRr-0088Q8-Da@rmk-PC.armlinux.org.uk
2023-10-11x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUsBorislav Petkov (AMD)
Fix erratum #1485 on Zen4 parts where running with STIBP disabled can cause an #UD exception. The performance impact of the fix is negligible. Reported-by: René Rebe <rene@exactcode.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: René Rebe <rene@exactcode.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/D99589F4-BC5D-430B-87B2-72C20370CF57@exactcode.com
2023-10-10Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-10-11 We've added 14 non-merge commits during the last 5 day(s) which contain a total of 12 files changed, 398 insertions(+), 104 deletions(-). The main changes are: 1) Fix s390 JIT backchain issues in the trampoline code generation which previously clobbered the caller's backchain, from Ilya Leoshkevich. 2) Fix zero-size allocation warning in xsk sockets when the configured ring size was close to SIZE_MAX, from Andrew Kanner. 3) Fixes for bpf_mprog API that were found when implementing support in the ebpf-go library along with selftests, from Daniel Borkmann and Lorenz Bauer. 4) Fix riscv JIT to properly sign-extend the return register in programs. This fixes various test_progs selftests on riscv, from Björn Töpel. 5) Fix verifier log for async callback return values where the allowed range was displayed incorrectly, from David Vernet. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline selftests/bpf: Add testcase for async callback return value failure bpf: Fix verifier log for async callback return values xdp: Fix zero-size allocation warning in xskq_create() riscv, bpf: Track both a0 (RISC-V ABI) and a5 (BPF) return values riscv, bpf: Sign-extend return values selftests/bpf: Make seen_tc* variable tests more robust selftests/bpf: Test query on empty mprog and pass revision into attach selftests/bpf: Adapt assert_mprog_count to always expect 0 count selftests/bpf: Test bpf_mprog query API via libbpf and raw syscall bpf: Refuse unused attributes in bpf_prog_{attach,detach} bpf: Handle bpf_mprog_query with NULL entry bpf: Fix BPF_PROG_QUERY last field check ==================== Link: https://lore.kernel.org/r/20231010223610.3984-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'linux-can-fixes-for-6.6-20231009' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-10-09 Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state detection and wait behavior. John Watts contributes a patch to only show the sun4i_can Kconfig option on ARCH_SUNXI. A patch by Miquel Raynal fixes the soft-reset workaround for Renesas SoCs in the sja1000 driver. Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver fixes the id2 register for the tcan4553. 2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC. * tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: Fix id2_register for tcan4553 can: flexcan: remove the auto stop mode for IMX93 can: sja1000: Always restart the Tx queue after an overrun arm64: dts: imx93: add the Flex-CAN stop mode by GPR can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior ==================== Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-11powerpc/47x: Fix 47x syscall return crashMichael Ellerman
Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP:  b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. Fixes: 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") Cc: stable@vger.kernel.org # v5.12+ Reported-by: Eddie James <eajames@linux.ibm.com> Tested-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/linuxppc-dev/fdaadc46-7476-9237-e104-1d2168526e72@linux.ibm.com/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://msgid.link/20231010114750.847794-1-mpe@ellerman.id.au
2023-10-11s390/bpf: Fix unwinding past the trampolineIlya Leoshkevich
When functions called by the trampoline panic, the backtrace that is printed stops at the trampoline, because the trampoline does not store its caller's frame address (backchain) on stack; it also stores the return address at a wrong location. Store both the same way as is already done for the regular eBPF programs. Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com
2023-10-11s390/bpf: Fix clobbering the caller's backchain in the trampolineIlya Leoshkevich
One of the first things that s390x kernel functions do is storing the the caller's frame address (backchain) on stack. This makes unwinding possible. The backchain is always stored at frame offset 152, which is inside the 160-byte stack area, that the functions allocate for their callees. The callees must preserve the backchain; the remaining 152 bytes they may use as they please. Currently the trampoline uses all 160 bytes, clobbering the backchain. This causes kernel panics when using __builtin_return_address() in functions called by the trampoline. Fix by reducing the usage of the caller-reserved stack area by 8 bytes in the trampoline. Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Reported-by: Song Liu <song@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231010203512.385819-2-iii@linux.ibm.com
2023-10-10Merge tag 'irq-urgent-2023-10-10-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of updates for interrupt chip drivers: - Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is caused by a control bit being moved to a different location - Update the SM8150 device tree PDC resource so the version register can be read - Make the Renesas RZG2L driver correct for interrupts which are outside of the LSB in the TSSR register by using the proper macro for calculating the mask - Document the Renesas RZ2GL device tree binding correctly and update them for a few devices which faul to boot otherwise - Use the proper accessor in the RZ2GL driver instead of blindly dereferencing an unchecked pointer - Make GICv3 handle the dma-non-coherent attribute correctly - Ensure that all interrupt controller nodes on RISCV are marked as initialized correctly Maintainer changes: - Add a new entry for GIC interrupt controllers and assign Marc Zyngier as the maintainer - Remove Marc Zyngier from the core and driver maintainer entries as he is burried in work and short of time to handle that. Thanks to Marc for all the great work he has done in the past couple of years! Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for v3.2 HW") has a incorrect SOB chain. The real author is Neil. His patch was posted by Dmitry once and Neil picked it up from the list and reposted it with the bogus SOB chain. Not a big deal, but worth to mention. I wanted to fix that up, but then got distracted and Marc piled more changes on top. So I decided to leave it as is instead of rebasing world" * tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove myself from the general IRQ subsystem maintenance MAINTAINERS: Add myself as the ARM GIC maintainer irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data() irqchip/stm32-exti: add missing DT IRQ flag translation irqchip/riscv-intc: Mark all INTC nodes as initialized irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing irqchip/gic-v3-its: Split allocation from initialisation of its_node dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property arm64: dts: qcom: sm8150: extend the size of the PDC resource irqchip/qcom-pdc: Add support for v3.2 HW
2023-10-10Merge tag 'hyperv-fixes-signed-20231009' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering) - fix hv_kvp_daemon to support keyfile based connection profile (Shradha Gupta) * tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv/hv_kvp_daemon:Support for keyfile based connection profile hyperv: reduce size of ms_hyperv_info x86/hyperv: Add common print prefix "Hyper-V" in hv_init x86/hyperv: Remove hv_vtl_early_init initcall x86/hyperv: Restrict get_vtl to only VTL platforms
2023-10-10powerpc/85xx: Fix math emulation exceptionChristophe Leroy
Booting mpc85xx_defconfig kernel on QEMU leads to: Bad trap at PC: fe9bab0, SR: 2d000, vector=800 awk[82]: unhandled trap (5) at 0 nip fe9bab0 lr fe9e01c code 5 in libc-2.27.so[fe5a000+17a000] awk[82]: code: 3aa00000 3a800010 4bffe03c 9421fff0 7ca62b78 38a00000 93c10008 83c10008 awk[82]: code: 38210010 4bffdec8 9421ffc0 7c0802a6 <fc00048e> d8010008 4815190d 93810030 Trace/breakpoint trap WARNING: no useful console This is because allthough CONFIG_MATH_EMULATION is selected, Exception 800 calls unknown_exception(). Call emulation_assist_interrupt() instead. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/066caa6d9480365da9b8ed83692d7101e10ac5f8.1695657339.git.christophe.leroy@csgroup.eu
2023-10-09riscv, bpf: Track both a0 (RISC-V ABI) and a5 (BPF) return valuesBjörn Töpel
The RISC-V BPF uses a5 for BPF return values, which are zero-extended, whereas the RISC-V ABI uses a0 which is sign-extended. In other words, a5 and a0 can differ, and are used in different context. The BPF trampoline are used for both BPF programs, and regular kernel functions. Make sure that the RISC-V BPF trampoline saves, and restores both a0 and a5. Fixes: 49b5e77ae3e2 ("riscv, bpf: Add bpf trampoline support for RV64") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231004120706.52848-3-bjorn@kernel.org
2023-10-09riscv, bpf: Sign-extend return valuesBjörn Töpel
The RISC-V architecture does not expose sub-registers, and hold all 32-bit values in a sign-extended format [1] [2]: | The compiler and calling convention maintain an invariant that all | 32-bit values are held in a sign-extended format in 64-bit | registers. Even 32-bit unsigned integers extend bit 31 into bits | 63 through 32. Consequently, conversion between unsigned and | signed 32-bit integers is a no-op, as is conversion from a signed | 32-bit integer to a signed 64-bit integer. While BPF, on the other hand, exposes sub-registers, and use zero-extension (similar to arm64/x86). This has led to some subtle bugs, where a BPF JITted program has not sign-extended the a0 register (return value in RISC-V land), passed the return value up the kernel, e.g.: | int from_bpf(void); | | long foo(void) | { | return from_bpf(); | } Here, a0 would be 0xffff_ffff, instead of the expected 0xffff_ffff_ffff_ffff. Internally, the RISC-V JIT uses a5 as a dedicated register for BPF return values. Keep a5 zero-extended, but explicitly sign-extend a0 (which is used outside BPF land). Now that a0 (RISC-V ABI) and a5 (BPF ABI) differs, a0 is only moved to a5 for non-BPF native calls (BPF_PSEUDO_CALL). Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-056b6ff-2023-10-02/unpriv-isa-asciidoc.pdf # [2] Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/download/draft-20230929-e5c800e661a53efe3c2678d71a306323b60eb13b/riscv-abi.pdf # [2] Link: https://lore.kernel.org/bpf/20231004120706.52848-2-bjorn@kernel.org
2023-10-09powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()Christophe Leroy
Commit 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.") replaced: if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; By: if (pte_young(*ptep)) return 0; But it should be: if (!pte_young(*ptep)) return 0; Fix it. Fixes: 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/8bb7f06494e21adada724ede47a4c3d97e879d40.1695659959.git.christophe.leroy@csgroup.eu
2023-10-09powerpc/8xx: Fix pte_access_permitted() for PAGE_NONEChristophe Leroy
On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing _PAGE_USER. But then pte_user() returns 1 also for PAGE_NONE. As _PAGE_NA prevent reads, add a specific version of pte_read() that returns 0 when _PAGE_NA is set instead of always returning 1. Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
2023-10-08Merge tag 'x86-urgent-2023-10-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix SEV-SNP guest crashes that may happen on NMIs - Fix a potential SEV platform memory setup overflow * tag 'x86-urgent-2023-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Change npages to unsigned long in snp_accept_memory() x86/sev: Use the GHCB protocol when available for SNP CPUID requests
2023-10-08perf/x86/lbr: Filter vsyscall addressesJP Kobryn
We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: JP Kobryn <inwardvessel@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org
2023-10-08x86/resctrl: Fix kernel-doc warningsRandy Dunlap
The kernel test robot reported kernel-doc warnings here: monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line We don't have a syntax for documenting individual data items via kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen for consistency. Fixes: 6a445edce657 ("x86/intel_rdt/cqm: Add RDT monitoring initialization") Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
2023-10-07Merge tag 'parisc-for-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - fix random faults in mmap'd memory on pre PA8800 processors - fix boot crash with nr_cpus=1 on kernel command line * tag 'parisc-for-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Restore __ldcw_align for PA-RISC 2.0 processors parisc: Fix crash with nr_cpus=1 option
2023-10-07parisc: Restore __ldcw_align for PA-RISC 2.0 processorsJohn David Anglin
Back in 2005, Kyle McMartin removed the 16-byte alignment for ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke spinlocks on pre PA8800 processors. The main symptom was random faults in mmap'd memory (e.g., gcc compilations, etc). Unfortunately, the errata for this ldcw change is lost. The issue is the 16-byte alignment required for ldcw semaphore instructions can only be reduced to natural alignment when the ldcw operation can be handled coherently in cache. Only PA8800 and PA8900 processors actually support doing the operation in cache. Aligning the spinlock dynamically adds two integer instructions to each spinlock. Tested on rp3440, c8000 and a500. Signed-off-by: John David Anglin <dave.anglin@bell.net> Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/ Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-07parisc: Fix crash with nr_cpus=1 optionHelge Deller
John David Anglin reported that giving "nr_cpus=1" on the command line causes a crash, while "maxcpus=1" works. Reported-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.18+
2023-10-06arm64: dts: mediatek: mt8195: Set DSU PMU status to failNícolas F. R. A. Prado
The DSU PMU allows monitoring performance events in the DSU cluster, which is done by configuring and reading back values from the DSU PMU system registers. However, for write-access to be allowed by ELs lower than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3 register, as it is disallowed by default. That configuration is not done on the firmware used by the MT8195 SoC, as a consequence, booting a MT8195-based machine like mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the instruction faults to EL3, and BL31 apparently just re-runs the instruction over and over. Mark the DSU PMU node in the Devicetree with status "fail", as the machine doesn't have a suitable firmware to make use of it from the kernel, and allowing its driver to probe would hang the kernel. Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-06arm64: dts: mediatek: fix t-phy unit nameEugen Hristev
dtbs_check throws a warning at t-phy nodes: Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property Warning (unit_address_vs_reg): /soc/t-phy@11c00000: node has a unit name, but no reg or ranges property The ranges is empty thus removing the `@1a243000`, `@11c00000` from the node name. Fixes: 6029cae696c8 ("arm64: dts: mediatek: mt7622: harmonize node names and compatibles") Fixes: 918aed7abd2d ("arm64: dts: mt7986: add pcie related device nodes") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230814093931.9298-2-eugen.hristev@collabora.com Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-4-dad7cd62a8ff@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-06arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regionsMacpaul Lin
The dts file of the MediaTek MT8195 demo board has been updated to include new reserved memory regions. These reserved memory regions are: - SCP - VPU, - Sound DMA - APU. These regions are defined with the "shared-dma-pool" compatible property. In addition, the existing reserved memory regions have been reordered by their addresses to improve readability and maintainability of the DTS file. Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5 Fixes: e4a417520101 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-06arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GBMacpaul Lin
The onboard dram of mt8195-demo board is 8GB. Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5 Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230905034511.11232-1-macpaul.lin@mediatek.com Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-2-dad7cd62a8ff@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A typo fix for a PMU driver, a workround for a side-channel erratum on Cortex-A520 and a fix for the local timer save/restore when using ACPI with Qualcomm's custom CPUs: - Workaround for Cortex-A520 erratum #2966298 - Fix typo in Arm CMN PMU driver that breaks counter overflow handling - Fix timer handling across idle for Qualcomm custom CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer arm64: errata: Add Cortex-A520 speculative unprivileged load workaround arm64: Add Cortex-A520 CPU part definition perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
2023-10-06arm64: dts: imx93: add the Flex-CAN stop mode by GPRHaibo Chen
imx93 A0 chip use the internal q-channel handshake signal in LPCG and CCM to automatically handle the Flex-CAN stop mode. But this method meet issue when do the system PM stress test. IC can't fix it easily. So in the new imx93 A1 chip, IC drop this method, and involve back the old way，use the GPR method to trigger the Flex-CAN stop mode signal. Now NXP claim to drop imx93 A0, and only support imx93 A1. So here add the stop mode through GPR. This patch also fix a typo for aonmix_ns_gpr. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/all/20230726112458.3524165-1-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-05Merge tag 'net-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ...
2023-10-04cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timerOza Pawandeep
Arm® Functional Fixed Hardware Specification defines LPI states, which provide an architectural context loss flags field that can be used to describe the context that might be lost when an LPI state is entered. - Core context Lost - General purpose registers. - Floating point and SIMD registers. - System registers, include the System register based - generic timer for the core. - Debug register in the core power domain. - PMU registers in the core power domain. - Trace register in the core power domain. - Trace context loss - GICR - GICD Qualcomm's custom CPUs preserves the architectural state, including keeping the power domain for local timers active. when core is power gated, the local timers are sufficient to wake the core up without needing broadcast timer. The patch fixes the evaluation of cpuidle arch_flags, and moves only to broadcast timer if core context lost is defined in ACPI LPI. Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com> Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-10-04Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-02x86/sev: Change npages to unsigned long in snp_accept_memory()Tom Lendacky
In snp_accept_memory(), the npages variables value is calculated from phys_addr_t variables but is an unsigned int. A very large range passed into snp_accept_memory() could lead to truncating npages to zero. This doesn't happen at the moment but let's be prepared. Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
2023-10-02x86/sev: Use the GHCB protocol when available for SNP CPUID requestsTom Lendacky
SNP retrieves the majority of CPUID information from the SNP CPUID page. But there are times when that information needs to be supplemented by the hypervisor, for example, obtaining the initial APIC ID of the vCPU from leaf 1. The current implementation uses the MSR protocol to retrieve the data from the hypervisor, even when a GHCB exists. The problem arises when an NMI arrives on return from the VMGEXIT. The NMI will be immediately serviced and may generate a #VC requiring communication with the hypervisor. Since a GHCB exists in this case, it will be used. As part of using the GHCB, the #VC handler will write the GHCB physical address into the GHCB MSR and the #VC will be handled. When the NMI completes, processing resumes at the site of the VMGEXIT which is expecting to read the GHCB MSR and find a CPUID MSR protocol response. Since the NMI handling overwrote the GHCB MSR response, the guest will see an invalid reply from the hypervisor and self-terminate. Fix this problem by using the GHCB when it is available. Any NMI received is properly handled because the GHCB contents are copied into a backup page and restored on NMI exit, thus preserving the active GHCB request or result. [ bp: Touchups. ] Fixes: ee0bfa08a345 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
generated by cgit (git 2.34.1) at 2024-06-23 13:17:52 +0000