summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-03-26arm64: defconfig: ti: k3: enable dma and networkingGrygorii Strashko
Enable TI K3 AM654x/J721E DMA and networking options. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-j721e-common-proc-board: add mcu cpsw nuss pinmux and phy ↵Grygorii Strashko
defs The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-j721e-mcu: add mcu cpsw nuss nodeGrygorii Strashko
Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defsGrygorii Strashko
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-am65-mcu: add cpsw nuss nodeGrygorii Strashko
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
2020-03-25s390/qdio: extend polling support to multiple queuesJulian Wiedmann
When the support for polling drivers was initially added, it only considered Input Queue 0. But as QDIO interrupts are actually for the full device and not a single queue, this doesn't really fit for configurations where multiple Input Queues are used. Rework the qdio code so that interrupts for a polling driver are not split up into actions for each queue. Instead deliver the interrupt as a single event, and let the driver decide which queue needs what action. When re-enabling the QDIO interrupt via qdio_start_irq(), this means that the qdio code needs to (1) put _all_ eligible queues back into a state where they raise IRQs, (2) and afterwards check _all_ eligible queues for new work to bridge the race window. On the qeth side of things (as the only qdio polling driver), we can now add CQ polling support to the main NAPI poll routine. It doesn't consume NAPI budget, and to avoid hogging the CPU we yield control after completing one full queue worth of buffers. The subsequent qdio_start_irq() will check for any additional work, and have us re-schedule the NAPI instance accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "A build fix with certain Kconfig combinations" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioremap: Fix CONFIG_EFI=n build
2020-03-23Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a correctness bug in the ARM64 version of ChaCha for lib/crypto used by WireGuard" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/chacha - correctly walk through blocks
2020-03-21x86/mm: split vmalloc_sync_all()Joerg Roedel
Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-21Merge tag 'powerpc-5.6-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for bugs introduced this cycle: - fix a crash when shutting down a KVM PR guest (our original style of KVM which doesn't use hypervisor mode) - fix for the recently added 32-bit KASAN_VMALLOC support Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson" * tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix kernel crash with PR KVM powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC
2020-03-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix panic() when it occurs during secondary CPU startup - Fix "kpti=off" when KASLR is enabled - Fix howler in compat syscall table for vDSO clock_getres() fallback * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: Fix syscall number of compat_clock_getres arm64: kpti: Fix "kpti=off" when KASLR is enabled arm64: smp: fix crash_smp_send_stop() behaviour arm64: smp: fix smp_send_stop() behaviour
2020-03-20crypto: arm64/chacha - correctly walk through blocksJason A. Donenfeld
Prior, passing in chunks of 2, 3, or 4, followed by any additional chunks would result in the chacha state counter getting out of sync, resulting in incorrect encryption/decryption, which is a pretty nasty crypto vuln: "why do images look weird on webpages?" WireGuard users never experienced this prior, because we have always, out of tree, used a different crypto library, until the recent Frankenzinc addition. This commit fixes the issue by advancing the pointers and state counter by the actual size processed. It also fixes up a bug in the (optional, costly) stride test that prevented it from running on arm64. Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-20KVM: PPC: Fix kernel crash with PR KVMGreg Kurz
With PR KVM, shutting down a VM causes the host kernel to crash: [ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638 [ 314.219299] Faulting instruction address: 0xc008000000d4ddb0 cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0] pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr] lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr] sp: c00000036da07a30 msr: 900000010280b033 dar: c00800000176c638 dsisr: 40000000 current = 0xc00000036d4c0000 paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01 pid = 1992, comm = qemu-system-ppc Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020 enter ? for help [c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr] [c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm] [c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm] [c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm] [c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm] [c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm] [c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm] [c00000036da07c30] c000000000420be0 __fput+0xe0/0x310 [c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0 [c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00 [c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0 [c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30 [c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68 This is caused by a use-after-free in kvmppc_mmu_pte_flush_all() which dereferences vcpu->arch.book3s which was previously freed by kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy() is called after kvmppc_core_vcpu_free() since commit ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code"). The kvmppc_mmu_destroy() helper calls one of the following depending on the KVM backend: - kvmppc_mmu_destroy_hv() which does nothing (Book3s HV) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 32-bit) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 64-bit) - kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc) It turns out that this is only relevant to PR KVM actually. And both 32 and 64 backends need vcpu->arch.book3s to be valid when calling kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy() from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the beginning of kvmppc_core_vcpu_free_pr(). This is consistent with kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr(). For the same reason, if kvmppc_core_vcpu_create_pr() returns an error then this means that kvmppc_mmu_init() was either not called or failed, in which case kvmppc_mmu_destroy() should not be called. Drop the line in the error path of kvm_arch_vcpu_create(). Fixes: ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan
2020-03-19arm64: compat: Fix syscall number of compat_clock_getresVincenzo Frascino
The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: <stable@vger.kernel.org> Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-19x86/ioremap: Fix CONFIG_EFI=n buildBorislav Petkov
In order to use efi_mem_type(), one needs CONFIG_EFI enabled. Otherwise that function is undefined. Use IS_ENABLED() to check and avoid the ifdeffery as the compiler optimizes away the following unreachable code then. Fixes: 985e537a4082 ("x86/ioremap: Map EFI runtime services data as encrypted for SEV") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/7561e981-0d9b-d62c-0ef2-ce6007aff1ab@infradead.org
2020-03-19arm64: kpti: Fix "kpti=off" when KASLR is enabledWill Deacon
Enabling KASLR forces the use of non-global page-table entries for kernel mappings, as this is a decision that we have to make very early on before mapping the kernel proper. When used in conjunction with the "kpti=off" command-line option, it is possible to use non-global kernel mappings but with the kpti trampoline disabled. Since commit 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of non-global mappings and does not take into account whether the kpti trampoline is enabled. This breaks context switching of the TPIDRRO_EL0 register for 64-bit tasks, where the clearing of the register is deferred to the ret-to-user code, but it also breaks the ARM SPE PMU driver which helpfully recommends passing "kpti=off" on the command line! Report whether or not KPTI is actually enabled in arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global variable directly when determining the protection flags for kernel mappings. Cc: Mark Brown <broonie@kernel.org> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Tested-by: Hongbo Yao <yaohongbo@huawei.com> Fixes: 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision") Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: smp: fix crash_smp_send_stop() behaviourCristian Marussi
On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: smp: fix smp_send_stop() behaviourCristian Marussi
On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-16Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - allow use of ARMv8 arch timer in 32-bit VDSO - rename missed .fixup section - fix kbuild issue with stack protector GCC plugin * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin ARM: 8958/1: rename missed uaccess .fixup section ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()
2020-03-16arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID modeMadalin Bucur
The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-idMadalin Bucur
The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15Merge tag 'x86-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Map EFI runtime service data as encrypted when SEV is enabled. Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode. - Remove the warning in the vector management code which triggered when a managed interrupt affinity changed outside of a CPU hotplug operation. The warning was correct until the recent core code change that introduced a CPU isolation feature which needs to migrate managed interrupts away from online CPUs under certain conditions to achieve the isolation" * tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vector: Remove warning on managed interrupt migration x86/ioremap: Map EFI runtime services data as encrypted for SEV
2020-03-15Merge tag 'perf-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A pile of perf fixes: Kernel side: - AMD uncore driver: Replace the open coded sanity check with the core variant, which provides the correct error code and also leaves a hint in dmesg Tooling: - Fix the stdio input handling with glibc versions >= 2.28 - Unbreak the futex-wake benchmark which was reduced to 0 test threads due to the conversion to cpumaps - Initialize sigaction structs before invoking sys_sigactio() - Plug the mapfile memory leak in perf jevents - Fix off by one relative directory includes - Fix an undefined string comparison in perf diff" * tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag tools: Fix off-by 1 relative directory includes perf jevents: Fix leak of mapfile memory perf bench: Clear struct sigaction before sigaction() syscall perf bench futex-wake: Restore thread count default to online CPU count perf top: Fix stdio interface input handling with glibc 2.28+ perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare perf symbols: Don't try to find a vmlinux file when looking for kernel modules perf bench: Share some global variables to fix build with gcc 10 perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files perf env: Do not return pointers to local variables perf tests bp_account: Make global variable static
2020-03-15Merge tag 'ras-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two RAS related fixes: - Shut down the per CPU thermal throttling poll work properly when a CPU goes offline. The missing shutdown caused the poll work to be migrated to a unbound worker which triggered warnings about the usage of smp_processor_id() in preemptible context - Fix the PPIN feature initialization which missed to enable the functionality when PPIN_CTL was enabled but the MSR locked against updates" * tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix logic and comments around MSR_PPIN_CTL x86/mce/therm_throt: Undo thermal polling properly on CPU offline
2020-03-14Merge tag 'arc-5.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix __ALIGN_STR and __ALIGN to not use default junk padding - Misc Kconfig cleanups, header updates * tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: define __ALIGN_STR and __ALIGN symbols for ARC ARC: show_regs: reduce lines of output ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARC: fpu: fix randconfig build error reported by 0-day test service ARC: fix some Kconfig typos ARC: Cleanup old Kconfig IO scheduler options
2020-03-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes for x86 and s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 KVM: s390: Also reset registers in sync regs for initial cpu reset KVM: fix Kconfig menu text for -Werror KVM: x86: remove stale comment from struct x86_emulate_ctxt KVM: x86: clear stale x86_emulate_ctxt->intercept value KVM: SVM: Fix the svm vmexit code for WRMSR KVM: X86: Fix dereference null cpufreq policy
2020-03-14Merge branch 'kvm-null-pointer-fix' into kvm-masterPaolo Bonzini
2020-03-14KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAsVitaly Kuznetsov
When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter with EVMCS GPA = 0 the host crashes because the evmcs_gpa != vmx->nested.hv_evmcs_vmptr condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will happen on vmx->nested.hv_evmcs pointer dereference. Another problematic EVMCS ptr value is '-1' but it only causes host crash after nested_release_evmcs() invocation. The problem is exactly the same as with '0', we mistakenly think that the EVMCS pointer hasn't changed and thus nested.hv_evmcs_vmptr is valid. Resolve the issue by adding an additional !vmx->nested.hv_evmcs check to nested_vmx_handle_enlightened_vmptrld(), this way we will always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL and this is supposed to catch all invalid EVMCS GPAs. Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs() to be consistent with initialization where we don't currently set hv_evmcs_vmptr to '-1'. Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-14Merge tag 'kvm-s390-master-5.6-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fully do the CPU resets as intended With 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") we clarified the meaning of the reset ioctl to fully reset the CPU and not only the parts that can not be handled by userspace. Turns out that we missed some parts.
2020-03-14KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirectNitesh Narayan Lal
Previously all fields of structure kvm_lapic_irq were not initialized before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause an issue when any of those fields are used for processing a request. For example not initializing the msi_redir_hint field before passing to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of kvm_apic_map_get_dest_lapic(). This will specifically happen when the kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage value of msi_redir_hint, which should not happen as the request belongs to APIC fixed delivery mode and we do not want to deliver the interrupt only to the lowest priority candidate. This patch initializes all the fields of kvm_lapic_irq based on the values of ioapic redirect_entry object before passing it on to kvm_bitmap_or_dest_vcpus(). Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> [Set level to false since the value doesn't really matter. Suggested by Vitaly Kuznetsov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-14KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1Sean Christopherson
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1 is not supported[*], i.e. intercepting ENCLS to inject a #UD is unnecessary. Avoiding ENCLS-exiting even when it is reported as supported by the CPU works around a reported issue where SGX is "hard" disabled after an S3 suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control are enumerated as unsupported. While the root cause of the S3 issue is unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a workaround for what is most likely a hardware or firmware issue. As a bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and vmcs02. Note, SGX must be disabled in BIOS to take advantage of this workaround [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are cleared. Soft disabled meaning disabling SGX without clearing the primary CPUID bit (in leaf 0x7) and without poking into non-SGX CPU paths, e.g. for the VMCS controls. Fixes: 0b665d304028 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Reported-by: Toni Spets <toni.spets@iki.fi> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-03-13 The following pull-request contains BPF updates for your *net-next* tree. We've added 86 non-merge commits during the last 12 day(s) which contain a total of 107 files changed, 5771 insertions(+), 1700 deletions(-). The main changes are: 1) Add modify_return attach type which allows to attach to a function via BPF trampoline and is run after the fentry and before the fexit programs and can pass a return code to the original caller, from KP Singh. 2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher objects to be visible in /proc/kallsyms so they can be annotated in stack traces, from Jiri Olsa. 3) Extend BPF sockmap to allow for UDP next to existing TCP support in order in order to enable this for BPF based socket dispatch, from Lorenz Bauer. 4) Introduce a new bpftool 'prog profile' command which attaches to existing BPF programs via fentry and fexit hooks and reads out hardware counters during that period, from Song Liu. Example usage: bpftool prog profile id 337 duration 3 cycles instructions llc_misses 4228 run_cnt 3403698 cycles (84.08%) 3525294 instructions # 1.04 insn per cycle (84.05%) 13 llc_misses # 3.69 LLC misses per million isns (83.50%) 5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition of a new bpf_link abstraction to keep in particular BPF tracing programs attached even when the applicaion owning them exits, from Andrii Nakryiko. 6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering and which returns the PID as seen by the init namespace, from Carlos Neira. 7) Refactor of RISC-V JIT code to move out common pieces and addition of a new RV32G BPF JIT compiler, from Luke Nelson. 8) Add gso_size context member to __sk_buff in order to be able to know whether a given skb is GSO or not, from Willem de Bruijn. 9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output implementation but can be called from tracepoint programs, from Eelco Chaudron. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13x86/mm: Rename is_kernel_text to __is_kernel_textJiri Olsa
The kbuild test robot reported compile issue on x86 in one of the following patches that adds <linux/kallsyms.h> include into <linux/bpf.h>, which is picked up by init_32.c object. The problem is that <linux/kallsyms.h> defines global function is_kernel_text which colides with the static function of the same name defined in init_32.c: $ make ARCH=i386 ... >> arch/x86/mm/init_32.c:241:19: error: redefinition of 'is_kernel_text' static inline int is_kernel_text(unsigned long addr) ^~~~~~~~~~~~~~ In file included from include/linux/bpf.h:21:0, from include/linux/bpf-cgroup.h:5, from include/linux/cgroup-defs.h:22, from include/linux/cgroup.h:28, from include/linux/hugetlb.h:9, from arch/x86/mm/init_32.c:18: include/linux/kallsyms.h:31:19: note: previous definition of 'is_kernel_text' was here static inline int is_kernel_text(unsigned long addr) Renaming the init_32.c is_kernel_text function to __is_kernel_text. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200312195610.346362-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-03-12 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 8 day(s) which contain a total of 12 files changed, 161 insertions(+), 15 deletions(-). The main changes are: 1) Andrii fixed two bugs in cgroup-bpf. 2) John fixed sockmap. 3) Luke fixed x32 jit. 4) Martin fixed two issues in struct_ops. 5) Yonghong fixed bpf_send_signal. 6) Yoshiki fixed BTF enum. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13x86/vector: Remove warning on managed interrupt migrationPeter Xu
The vector management code assumes that managed interrupts cannot be migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE() which triggers when a managed interrupt vector association on a online CPU is cleared. The CPU offline code uses a different mechanism which cannot trigger this. This assumption is not longer correct because the new CPU isolation feature which affects the placement of managed interrupts must be able to move a managed interrupt away from an online CPU. There are two reasons why this can happen: 1) When the interrupt is activated the affinity mask which was established in irq_create_affinity_masks() is handed in to the vector allocation code. This mask contains all CPUs to which the interrupt can be made affine to, but this does not take the CPU isolation 'managed_irq' mask into account. When the interrupt is finally requested by the device driver then the affinity is checked again and the CPU isolation 'managed_irq' mask is taken into account, which moves the interrupt to a non-isolated CPU if possible. 2) The interrupt can be affine to an isolated CPU because the non-isolated CPUs in the calculated affinity mask are not online. Once a non-isolated CPU which is in the mask comes online the interrupt is migrated to this non-isolated CPU In both cases the regular online migration mechanism is used which triggers the WARN_ON_ONCE() in free_moved_vector(). Case #1 could have been addressed by taking the isolation mask into account, but that would require a massive code change in the activation logic and the eventual migration event was accepted as a reasonable tradeoff when the isolation feature was developed. But even if #1 would be addressed, #2 would still trigger it. Of course the warning in free_moved_vector() was overlooked at that time and the above two cases which have been discussed during patch review have obviously never been tested before the final submission. So keep it simple and remove the warning. [ tglx: Rewrote changelog and added a comment to free_moved_vector() ] Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com
2020-03-13powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOCChristophe Leroy
With CONFIG_KASAN_VMALLOC, new page tables are created at the time shadow memory for vmalloc area is unmapped. If some parts of the page table still have entries to the zero page shadow memory, the entries are wrongly marked RW. With CONFIG_KASAN_VMALLOC, almost the entire kernel address space is managed by KASAN. To make it simple, just create KASAN page tables for the entire kernel space at kasan_init(). That doesn't use much more space, and that's anyway already done for hash platforms. Fixes: 3d4247fcc938 ("powerpc/32: Add support of KASAN_VMALLOC") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ef5248fc1f496c6b0dfdb59380f24968f25f75c5.1583513368.git.christophe.leroy@c-s.fr
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12Revert "arm64: dts: sdm845: add IPA information"Alex Elder
This reverts commit 9cc5ae125f0eaee471bc87fb5cbf29385fd9272a. This commit: b303f9f0050b arm64: dts: sdm845: Redefine interconnect provider DT nodes found in the Qualcomm for-next tree removes/redefines the interconnect provider node(s) used for IPA. I'm not sure whether it technically conflicts with the IPA change to "sdm845.dtsi" in for-next, but it renders it broken. Revert this commit in the for-next tree, with the plan to incorporate it into the Qualcomm tree instead. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a build problem with x86/curve25519" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/curve25519 - support assemblers with no adx support
2020-03-12perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flagKim Phillips
Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com
2020-03-11ARC: define __ALIGN_STR and __ALIGN symbols for ARCEugeniy Paltsev
The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11ARC: show_regs: reduce lines of outputVineet Gupta
Before ------ | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | | [ECR ]: 0x00090000 => | [EFA ]: 0x00000000 | [ERET ]: 0x2004aa6c | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | [STAT32]: 0x80080a82 [IE U ] | BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 After ----- | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c | STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18 | BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11Merge tag 'mips_fixes_5.6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "A few MIPS fixes: - DT fixes for CI20 - Fix command line handling - Correct patchwork URL" * tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct MIPS patchwork URL MIPS: DTS: CI20: fix interrupt for pcf8563 RTC MIPS: DTS: CI20: fix PMU definitions for ACT8600 MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling
2020-03-11x86/ioremap: Map EFI runtime services data as encrypted for SEVTom Lendacky
The dmidecode program fails to properly decode the SMBIOS data supplied by OVMF/UEFI when running in an SEV guest. The SMBIOS area, under SEV, is encrypted and resides in reserved memory that is marked as EFI runtime services data. As a result, when memremap() is attempted for the SMBIOS data, it can't be mapped as regular RAM (through try_ram_remap()) and, since the address isn't part of the iomem resources list, it isn't mapped encrypted through the fallback ioremap(). Add a new __ioremap_check_other() to deal with memory types like EFI_RUNTIME_SERVICES_DATA which are not covered by the resource ranges. This allows any runtime services data which has been created encrypted, to be mapped encrypted too. [ bp: Move functionality to a separate function. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # 5.3 Link: https://lkml.kernel.org/r/2d9e16eb5b53dc82665c95c6764b7407719df7a0.1582645327.git.thomas.lendacky@amd.com
2020-03-11bpf: Fix trampoline generation for fmod_ret programsAlexei Starovoitov
fmod_ret progs are emitted as: start = __bpf_prog_enter(); call fmod_ret *(u64 *)(rbp - 8) = rax __bpf_prog_exit(, start); test eax, eax jne do_fexit That 'test eax, eax' is working by accident. The compiler is free to use rax inside __bpf_prog_exit() or inside functions that __bpf_prog_exit() is calling. Which caused "test_progs -t modify_return" to sporadically fail depending on compiler version and kconfig. Fix it by using 'cmp [rbp - 8], 0' instead of 'test eax, eax'. Fixes: ae24082331d9 ("bpf: Introduce BPF_MODIFY_RETURN") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200311003906.3643037-1-ast@kernel.org
2020-03-11KVM: s390: Also reset registers in sync regs for initial cpu resetChristian Borntraeger
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-08arm64: dts: sdm845: add IPA informationAlex Elder
Add IPA-related nodes and definitions to "sdm845.dtsi". Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-01 03:23:13 +0000