summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-03-06arm64: dts: ls1043a: FMan erratum A050385Madalin Bucur
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Revert "KVM: x86: enable -Werror"Christoph Hellwig
This reverts commit ead68df94d248c80fdbae220ae5425eb5af2e753. Using the -Werror flag breaks the build for me due to mostly harmless KASAN or similar warnings: arch/x86/kvm/x86.c: In function ‘kvm_timer_init’: arch/x86/kvm/x86.c:7209:1: error: the frame size of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Feel free to add a CONFIG_WERROR if you care strong enough, but don't break peoples builds for absolutely no good reason. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-25Merge tag 'riscv-for-linux-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of RISC-V related fixes that I've collected and would like to target for 5.6-rc4: - A fix to set up the PMPs on boot, which allows the kernel to access memory on systems that don't set up permissive PMPs before getting to Linux. This only effects machine-mode kernels, which currently means only NOMMU kernels. - A fix to avoid enabling supervisor-mode interrupts when running in machine-mode, also only for NOMMU kernels. - A pair of fixes to our KASAN support to avoid corrupting memory. - A gitignore fix. This boots on QEMU's virt board for me" * tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: adjust the indent riscv: allocate a complete page size for each page table riscv: Fix gitignore RISC-V: Don't enable all interrupts in trap_init() riscv: set pmp configuration if kernel is running in M-mode
2020-02-25Merge branch 'mips-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS maintenance to Thomas Bogendoerfer - this will be my final pull request as MIPS maintainer. Thanks for your helpful comments, useful corrections & responsiveness during the time I've fulfilled the role, and I'm sure I'll pop up elsewhere in the tree somewhere down the line" * 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Hand MIPS over to Thomas MIPS: ingenic: DTS: Fix watchdog nodes MIPS: X1000: Fix clock of watchdog node. MIPS: vdso: Wrap -mexplicit-relocs in cc-option MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()' MIPS: cavium_octeon: Fix syncw generation. mips: vdso: add build time check that no 'jalr t9' calls left MIPS: Disable VDSO time functionality on microMIPS mips: vdso: fix 'jalr t9' crash in vdso code
2020-02-24riscv: adjust the indentZong Li
Adjust the indent to match Linux coding style. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24riscv: allocate a complete page size for each page tableZong Li
Each page table should be created by allocating a complete page size for it. Otherwise, the content of the page table would be corrupted somewhere through memory allocation which allocates the memory at the middle of the page table for other use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes, including the fix for CVE-2020-2732 and a few issues found by 'make W=1'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: rstify new ioctls in api.rst KVM: nVMX: Check IO instruction VM-exit conditions KVM: nVMX: Refactor IO bitmap checks into helper function KVM: nVMX: Don't emulate instructions in guest mode KVM: nVMX: Emulate MTF when performing instruction emulation KVM: fix error handling in svm_hardware_setup KVM: SVM: Fix potential memory leak in svm_cpu_init() KVM: apic: avoid calculating pending eoi from an uninitialized val KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1 kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI kvm/emulate: fix a -Werror=cast-function-type KVM: x86: fix incorrect comparison in trace event KVM: nVMX: Fix some obsolete comments and grammar error KVM: x86: fix missing prototypes KVM: x86: enable -Werror
2020-02-23Merge tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull csky updates from Guo Ren: "Sorry, I missed 5.6-rc1 merge window, but in this pull request the most are the fixes and the rests are between fixes and features. The only outside modification is the MAINTAINERS file update with our mailing list. - cache flush implementation fixes - ftrace modify panic fix - CONFIG_SMP boot problem fix - fix pt_regs saving for atomic.S - fix fixaddr_init without highmem. - fix stack protector support - fix fake Tightly-Coupled Memory code compile and use - fix some typos and coding convention" * tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits) csky: Replace <linux/clk-provider.h> by <linux/of_clk.h> csky: Implement copy_thread_tls csky: Add PCI support csky: Minimize defconfig to support buildroot config.fragment csky: Add setup_initrd check code csky: Cleanup old Kconfig options arch/csky: fix some Kconfig typos csky: Fixup compile warning for three unimplemented syscalls csky: Remove unused cache implementation csky: Fixup ftrace modify panic csky: Add flush_icache_mm to defer flush icache all csky: Optimize abiv2 copy_to_user_page with VM_EXEC csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860) csky: Remove unnecessary flush_icache_* implementation csky: Support icache flush without specific instructions csky/Kconfig: Add Kconfig.platforms to support some drivers csky/smp: Fixup boot failed when CONFIG_SMP csky: Set regs->usp to kernel sp, when the exception is from kernel csky/mm: Fixup export invalid_pte_table symbol csky: Separate fixaddr_init from highmem ...
2020-02-23KVM: nVMX: Check IO instruction VM-exit conditionsOliver Upton
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Refactor IO bitmap checks into helper functionOliver Upton
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Don't emulate instructions in guest modePaolo Bonzini
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Emulate MTF when performing instruction emulationOliver Upton
Since commit 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap flag processor-based execution control for its L2 guest. KVM simply forwards any MTF VM-exits to the L1 guest, which works for normal instruction execution. However, when KVM needs to emulate an instruction on the behalf of an L2 guest, the monitor trap flag is not emulated. Add the necessary logic to kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon instruction emulation for L2. Fixes: 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: fix error handling in svm_hardware_setupLi RongQing
rename svm_hardware_unsetup as svm_hardware_teardown, move it before svm_hardware_setup, and call it to free all memory if fail to setup in svm_hardware_setup, otherwise memory will be leaked remove __exit attribute for it since it is called in __init function Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-22Merge tag 'ras-urgent-2020-02-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two fixes for the AMD MCE driver: - Populate the per CPU MCA bank descriptor pointer only after it has been completely set up to prevent a use-after-free in case that one of the subsequent initialization step fails - Implement a proper release function for the sysfs entries of MCA threshold controls instead of freeing the memory right in the CPU teardown code, which leads to another use-after-free when the associated sysfs file is opened and accessed" * tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Fix kobject lifetime x86/mce/amd: Publish the bank pointer only after setup has succeeded
2020-02-22Merge tag 'x86-urgent-2020-02-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Remove the __force_oder definiton from the kaslr boot code as it is already defined in the page table code which makes GCC 10 builds fail because it changed the default to -fno-common. - Address the AMD erratum 1054 concerning the IRPERF capability and enable the Instructions Retired fixed counter on machines which are not affected by the erratum" * tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF x86/boot/compressed: Don't declare __force_order in kaslr_64.c
2020-02-22Merge tag 's390-5.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index
2020-02-21Merge tag 'for-linus-5.6-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two small fixes for Xen: - a fix to avoid warnings with new gcc - a fix for incorrectly disabled interrupts when calling _cond_resched()" * tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Enable interrupts when calling _cond_resched() x86/xen: Distribute switch variables for initialization
2020-02-21Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "It's all straightforward apart from the changes to mmap()/mremap() in relation to their handling of address arguments from userspace with non-zero tag bits in the upper byte. The change to brk() is necessary to fix a nasty user-visible regression in malloc(), but we tightened up mmap() and mremap() at the same time because they also allow the user to create virtual aliases by accident. It's much less likely than brk() to matter in practice, but enforcing the principle of "don't permit the creation of mappings using tagged addresses" leads to a straightforward ABI without having to worry about the "but what if a crazy program did foo?" aspect of things. Summary: - Fix regression in malloc() caused by ignored address tags in brk() - Add missing brackets around argument to untagged_addr() macro - Fix clang build when using binutils assembler - Fix silly typo in virtual memory map documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: mm: Avoid creating virtual address aliases in brk()/mmap()/mremap() docs: arm64: fix trivial spelling enought to enough in memory.rst arm64: memory: Add missing brackets to untagged_addr() macro arm64: lse: Fix LSE atomics with LLVM
2020-02-21Merge tag 'powerpc-5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6. This is two weeks worth as I was out sick last week: - Three fixes for the recently added VMAP_STACK on 32-bit. - Three fixes related to hugepages on 8xx (32-bit). - A fix for a bug in our transactional memory handling that could lead to a kernel crash if we saw a page fault during signal delivery. - A fix for a deadlock in our PCI EEH (Enhanced Error Handling) code. - A couple of other minor fixes. Thanks to: Christophe Leroy, Erhard F, Frederic Barrat, Gustavo Luiz Duarte, Larry Finger, Leonardo Bras, Oliver O'Halloran, Sam Bobroff" * tag 'powerpc-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S powerpc/xmon: Fix whitespace handling in getstring() powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery powerpc/8xx: Fix clearing of bits 20-23 in ITLB miss powerpc/hugetlb: Fix 8M hugepages on 8xx powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page size powerpc/eeh: Fix deadlock handling dead PHB
2020-02-21KVM: SVM: Fix potential memory leak in svm_cpu_init()Miaohe Lin
When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: apic: avoid calculating pending eoi from an uninitialized valMiaohe Lin
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when ↵Vitaly Kuznetsov
apicv is globally disabled When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*), nothing happens to VMX MSRs on the already existing vCPUs, however, all new ones are created with PIN_BASED_POSTED_INTR filtered out. This is very confusing and results in the following picture inside the guest: $ rdmsr -ax 0x48d ff00000016 7f00000016 7f00000016 7f00000016 This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three. L1 hypervisor may only check CPU0's controls to find out what features are available and it will be very confused later. Switch to setting PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1Vitaly Kuznetsov
Even when APICv is disabled for L1 it can (and, actually, is) still available for L2, this means we need to always call vmx_deliver_nested_posted_interrupt() when attempting an interrupt delivery. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabledSuravee Suthikulpanit
Launching VM w/ AVIC disabled together with pass-through device results in NULL pointer dereference bug with the following call trace. RIP: 0010:svm_refresh_apicv_exec_ctrl+0x17e/0x1a0 [kvm_amd] Call Trace: kvm_vcpu_update_apicv+0x44/0x60 [kvm] kvm_arch_vcpu_ioctl_run+0x3f4/0x1c80 [kvm] kvm_vcpu_ioctl+0x3d8/0x650 [kvm] do_vfs_ioctl+0xaa/0x660 ? tomoyo_file_ioctl+0x19/0x20 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x57/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Investigation shows that this is due to the uninitialized usage of struct vapu_svm.ir_list in the svm_set_pi_irte_mode(), which is called from svm_refresh_apicv_exec_ctrl(). The ir_list is initialized only if AVIC is enabled. So, fixes by adding a check if AVIC is enabled in the svm_refresh_apicv_exec_ctrl(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Fixes: 8937d762396d ("kvm: x86: svm: Add support to (de)activate posted interrupts.") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSEXiaoyao Li
Commit 159348784ff0 ("x86/vmx: Introduce VMX_FEATURES_*") missed bit 26 (enable user wait and pause) of Secondary Processor-based VM-Execution Controls. Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo, and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them uniform. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadowwanpeng li
For the duration of mapping eVMCS, it derefences ->memslots without holding ->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU is already taken. It can be reproduced by running kvm's evmcs_test selftest. ============================= warning: suspicious rcu usage 5.6.0-rc1+ #53 tainted: g w ioe ----------------------------- ./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/8507: #0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [kvm] stack backtrace: cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53 hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016 call trace: dump_stack+0x68/0x9b kvm_read_guest_cached+0x11d/0x150 [kvm] kvm_hv_get_assist_page+0x33/0x40 [kvm] nested_enlightened_vmentry+0x2c/0x60 [kvm_intel] nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel] nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel] vmx_vcpu_run+0x67a/0xe60 [kvm_intel] vcpu_enter_guest+0x35e/0x1bc0 [kvm] kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm] kvm_vcpu_ioctl+0x370/0x680 [kvm] ksys_ioctl+0x235/0x850 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x77/0x780 entry_syscall_64_after_hwframe+0x49/0xbe Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOIMiaohe Lin
Commit 13db77347db1 ("KVM: x86: don't notify userspace IOAPIC on edge EOI") said, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. And var level indicates level-triggered interrupt. But commit 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") replace var level with irq.level by mistake. Fix it by changing irq.level to irq.trig_mode. Cc: stable@vger.kernel.org Fixes: 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-21csky: Implement copy_thread_tlsGuo Ren
This is required for clone3 which passes the TLS value through a struct rather than a register. Cc: Amanieu d'Antras <amanieu@gmail.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Add PCI supportMaJun
Add the pci related code for csky arch to support basic pci virtual function, such as qemu virt-pci-9pfs. Signed-off-by: MaJun <majun258@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Minimize defconfig to support buildroot config.fragmentMa Jun
Some bsp (eg: buildroot) has defconfig.fragment design to add more configs into the defconfig in linux source code tree. For example, we could put different cpu configs into different defconfig.fragments, but they all use the same defconfig in Linux. Signed-off-by: Ma Jun <majun258@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Add setup_initrd check codeGuo Ren
We should give some necessary check for initrd just like other architectures and it seems that setup_initrd() could be a common code for all architectures. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Cleanup old Kconfig optionsKrzysztof Kozlowski
CONFIG_CLKSRC_OF is gone since commit bb0eb050a577 ("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform already selects TIMER_OF. CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03dd ("dma-debug: remove CONFIG_HAVE_DMA_API_DEBUG"). CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21arch/csky: fix some Kconfig typosRandy Dunlap
Fix wording in help text for the CPU_HAS_LDSTEX symbol. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Fixup compile warning for three unimplemented syscallsGuo Ren
Implement fstat64, fstatat64, clone3 syscalls to fixup checksyscalls.sh compile warnings. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Remove unused cache implementationGuo Ren
Only for coding convention, these codes are unnecessary for abiv2. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Fixup ftrace modify panicGuo Ren
During ftrace init, linux will replace all function prologues (call_mcout) with nops, but it need flush_dcache and invalidate_icache to make it work. So flush_cache functions couldn't be nested called by ftrace framework. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Add flush_icache_mm to defer flush icache allGuo Ren
Some CPUs don't support icache.va instruction to maintain the whole smp cores' icache. Using icache.all + IPI casue a lot on performace and using defer mechanism could reduce the number of calling icache _flush_all functions. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Optimize abiv2 copy_to_user_page with VM_EXECGuo Ren
Only when vma is for VM_EXEC, we need sync dcache & icache. eg: - gdb ptrace modify user space instruction code area. Add VM_EXEC condition to reduce unnecessary cache flush. The abiv1 cpus' cache are all VIPT, so we still need to deal with dcache aliasing problem. But there is optimized way to use cache color, just like what's done in arch/csky/abiv1/inc/abi/page.h. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)Guo Ren
Instead of flushing cache per update_mmu_cache() called, we use flush_dcache_page to reduce the frequency of flashing the cache. As abiv2 cpus are all PIPT for icache & dcache, we needn't handle dcache aliasing problem. But their icache can't snoop dcache, so we still need sync_icache_dcache in update_mmu_cache(). Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Remove unnecessary flush_icache_* implementationGuo Ren
The abiv2 CPUs are all PIPT cache, so there is no need to implement flush_icache_page function. The function flush_icache_user_range hasn't been used, so just remove it. The function flush_cache_range is not necessary for PIPT cache when tlb mapping changed. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Support icache flush without specific instructionsGuo Ren
Some CPUs don't support icache specific instructions to flush icache lines in broadcast way. We use cpu control registers to flush local icache and use IPI to notify other cores. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky/Kconfig: Add Kconfig.platforms to support some driversGuo Ren
Such as snps,dw-apb-ictl Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky/smp: Fixup boot failed when CONFIG_SMPGuo Ren
If we use a non-ipi-support interrupt controller, it will cause panic here. We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Set regs->usp to kernel sp, when the exception is from kernelGuo Ren
In the past, we didn't care about kernel sp when saving pt_reg. But in some cases, we still need pt_reg->usp to represent the kernel stack before enter exception. For cmpxhg in atomic.S, we need save and restore usp for above. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky/mm: Fixup export invalid_pte_table symbolGuo Ren
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need invalid_pte_talbe to get result. If a module use these functions, we need export the symbol for it. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Mo Qihui <qihui.mo@verisilicon.com> Cc: Zhange Jian <zhang_jian5@dahuatech.com>
2020-02-21csky: Separate fixaddr_init from highmemGuo Ren
After fixaddr_init is separated from highmem, we could use tcm without highmem selected. (610 (abiv1) don't support highmem, but it could use tcm now.) Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Tightly-Coupled Memory or Sram supportGuo Ren
The implementation are not only used by TCM but also used by sram on SOC bus. It follow existed linux tcm software interface, so that old tcm application codes could be re-used directly. Software interface list in asm/tcm.h: - Variables/Const: __tcmdata, __tcmconst - Functions: __tcmfunc, __tcmlocalfunc - Malloc/Free: tcm_alloc, tcm_free In linux menuconfig: - Choose a TCM contain instrctions + data or separated in ITCM/DTCM. - Determine TCM_BASE (DTCM_BASE) in phyiscal address. - Determine size of TCM or ITCM(DTCM) in page counts. Here is hello tcm example from Documentation/arm/tcm.rst which could be directly used: /* Uninitialized data */ static u32 __tcmdata tcmvar; /* Initialized data */ static u32 __tcmdata tcmassigned = 0x2BADBABEU; /* Constant */ static const u32 __tcmconst tcmconst = 0xCAFEBABEU; static void __tcmlocalfunc tcm_to_tcm(void) { int i; for (i = 0; i < 100; i++) tcmvar ++; } static void __tcmfunc hello_tcm(void) { /* Some abstract code that runs in ITCM */ int i; for (i = 0; i < 100; i++) { tcmvar ++; } tcm_to_tcm(); } static void __init test_tcm(void) { u32 *tcmem; int i; hello_tcm(); printk("Hello TCM executed from ITCM RAM\n"); printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); tcmvar = 0xDEADBEEFU; printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); /* Allocate some TCM memory from the pool */ tcmem = tcm_alloc(20); if (tcmem) { printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); tcmem[0] = 0xDEADBEEFU; tcmem[1] = 0x2BADBABEU; tcmem[2] = 0xCAFEBABEU; tcmem[3] = 0xDEADBEEFU; tcmem[4] = 0x2BADBABEU; for (i = 0; i < 5; i++) printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); tcm_free(tcmem, 20); } } TODO: - Separate fixup mapping from highmem - Support abiv1 Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Initial stack protector supportMao Han
This is a basic -fstack-protector support without per-task canary switching. The protector will report something like when stack corruption is detected: It's tested with strcpy local array overflow in sys_kill and get: stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c TODO: - Support task switch for different cannary Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-20Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA fixes from Mimi Zohar: "Two bug fixes and an associated change for each. The one that adds SM3 to the IMA list of supported hash algorithms is a simple change, but could be considered a new feature" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: add sm3 algorithm to hash algorithm configuration list crypto: rename sm3-256 to sm3 in hash_algo_name efi: Only print errors about failing to get certs if EFI vars are found x86/ima: use correct identifier for SetupMode variable