| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix a (hopefully final) IRQ state tracking bug vs MCE handling
- Fix a documentation link"
* tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix incorrect references to zero-page.txt
x86/mce: Use idtentry_nmi_enter/exit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes this week:
- A fix to actually reserve the device tree's memory. Without this
the device tree can be overwritten on systems that don't otherwise
reserve it. This issue should only manifest on !MMU systems.
- A workaround for a BUG() that triggers when the memory that
originally contained initdata is freed and later repurposed. This
triggers a BUG() on builds that had HARDENED_USERCOPY enabled"
* tag 'riscv-for-linus-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup bootup failure with HARDENED_USERCOPY
RISC-V: Make sure memblock reserves the memory containing DT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"One fix for a regression when booting as a Xen guest on ARM64
introduced probably during the 5.9 cycle. It is very low risk as it is
modifying Xen specific code only.
The exact commit introducing the bug hasn't been identified yet, but
everything was fine in 5.8 and only in 5.9 some configurations started
to fail"
* tag 'for-linus-5.9b-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/arm64: xen: Fix to convert percpu address to gfn correctly
|
|
Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu
address conversion.
In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted
to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v)
assumes the given virtual address is in linear mapped kernel memory
area, it can not convert the per-cpu memory if it is allocated on
vmalloc area.
This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK.
If it is enabled, the first chunk of percpu memory is linear mapped.
In the other case, that is allocated from vmalloc area. Moreover,
if the first chunk of percpu has run out until allocating
xen_vcpu_info, it will be allocated on the 2nd chunk, which is
based on kernel memory or vmalloc memory (depends on
CONFIG_NEED_PER_CPU_KM).
Without this fix and kernel configured to use vmalloc area for
the percpu memory, the Dom0 kernel will fail to boot with following
errors.
[ 0.466172] Xen: initializing cpu0
[ 0.469601] ------------[ cut here ]------------
[ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180
[ 0.484435] Modules linked in:
[ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4
[ 0.493895] Hardware name: Socionext Developer Box (DT)
[ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[ 0.504836] pc : xen_starting_cpu+0x160/0x180
[ 0.509263] lr : xen_starting_cpu+0xb0/0x180
[ 0.513599] sp : ffff8000116cbb60
[ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000
[ 0.522366] x27: 0000000000000000 x26: 0000000000000000
[ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600
[ 0.533129] x23: 0000000000000000 x22: 0000000000000000
[ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010
[ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef
[ 0.554655] x15: ffffffffffffffff x14: 0720072007200720
[ 0.560037] x13: 0720072007200720 x12: 0720072007200720
[ 0.565418] x11: 0720072007200720 x10: 0720072007200720
[ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00
[ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000
[ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000
[ 0.592327] x1 : 000000000000002f x0 : 0000800000000000
[ 0.597716] Call trace:
[ 0.600232] xen_starting_cpu+0x160/0x180
[ 0.604309] cpuhp_invoke_callback+0xac/0x640
[ 0.608736] cpuhp_issue_call+0xf4/0x150
[ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[ 0.618030] __cpuhp_setup_state+0x84/0xf8
[ 0.622192] xen_guest_init+0x324/0x364
[ 0.626097] do_one_initcall+0x54/0x250
[ 0.630003] kernel_init_freeable+0x12c/0x2c8
[ 0.634428] kernel_init+0x1c/0x128
[ 0.637988] ret_from_fork+0x10/0x18
[ 0.641635] ---[ end trace d95b5309a33f8b27 ]---
[ 0.646337] ------------[ cut here ]------------
[ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158!
[ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP
[ 0.662548] Modules linked in:
[ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4
[ 0.673398] Hardware name: Socionext Developer Box (DT)
[ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[ 0.684338] pc : xen_starting_cpu+0x178/0x180
[ 0.688765] lr : xen_starting_cpu+0x144/0x180
[ 0.693188] sp : ffff8000116cbb60
[ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000
[ 0.701955] x27: 0000000000000000 x26: 0000000000000000
[ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600
[ 0.712718] x23: 0000000000000000 x22: 0000000000000000
[ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010
[ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef
[ 0.734245] x15: ffffffffffffffff x14: 0720072007200720
[ 0.739626] x13: 0720072007200720 x12: 0720072007200720
[ 0.745008] x11: 0720072007200720 x10: 0720072007200720
[ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00
[ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000
[ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef
[ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea
[ 0.777304] Call trace:
[ 0.779819] xen_starting_cpu+0x178/0x180
[ 0.783898] cpuhp_invoke_callback+0xac/0x640
[ 0.788325] cpuhp_issue_call+0xf4/0x150
[ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[ 0.797619] __cpuhp_setup_state+0x84/0xf8
[ 0.801779] xen_guest_init+0x324/0x364
[ 0.805683] do_one_initcall+0x54/0x250
[ 0.809590] kernel_init_freeable+0x12c/0x2c8
[ 0.814016] kernel_init+0x1c/0x128
[ 0.817583] ret_from_fork+0x10/0x18
[ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000)
[ 0.827415] ---[ end trace d95b5309a33f8b28 ]---
[ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
6184358da000 ("riscv: Fixup static_obj() fail") attempted to elide a lockdep
failure by rearranging our kernel image to place all initdata within [_stext,
_end], thus triggering lockdep to treat these as static objects. These objects
are released and eventually reallocated, causing check_kernel_text_object() to
trigger a BUG().
This backs out the change to make [_stext, _end] all-encompassing, instead just
moving initdata. This results in initdata being outside of [__init_begin,
__init_end], which means initdata can't be freed.
Link: https://lore.kernel.org/linux-riscv/1593266228-61125-1-git-send-email-guoren@kernel.org/T/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
[Palmer: Clean up commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix a kernel panic in the AES crypto code caused by a BR tail call not
matching the target BTI instruction (when branch target identification
is enabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
crypto: arm64: Use x16 with indirect branch to bti_c
|
|
The AES code uses a 'br x7' as part of a function called by
a macro. That branch needs a bti_j as a target. This results
in a panic as seen below. Using x16 (or x17) with an indirect
branch keeps the target bti_c.
Bad mode in Synchronous Abort handler detected on CPU1, code 0x34000003 -- BTI
CPU: 1 PID: 265 Comm: cryptomgr_test Not tainted 5.8.11-300.fc33.aarch64 #1
pstate: 20400c05 (nzCv daif +PAN -UAO BTYPE=j-)
pc : aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs]
lr : aesbs_xts_encrypt+0x48/0xe0 [aes_neon_bs]
sp : ffff80001052b730
aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs]
__xts_crypt+0xb0/0x2dc [aes_neon_bs]
xts_encrypt+0x28/0x3c [aes_neon_bs]
crypto_skcipher_encrypt+0x50/0x84
simd_skcipher_encrypt+0xc8/0xe0
crypto_skcipher_encrypt+0x50/0x84
test_skcipher_vec_cfg+0x224/0x5f0
test_skcipher+0xbc/0x120
alg_test_skcipher+0xa0/0x1b0
alg_test+0x3dc/0x47c
cryptomgr_test+0x38/0x60
Fixes: 0e89640b640d ("crypto: arm64 - Use modern annotations for assembly functions")
Cc: <stable@vger.kernel.org> # 5.6.x-
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Dave P Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201006163326.2780619-1-jeremy.linton@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
|
|
Currently, the memory containing DT is not reserved. Thus, that region
of memory can be reallocated or reused for other purposes. This may result
in corrupted DT for nommu virt board in Qemu. We may not face any issue
in kendryte as DT is embedded in the kernel image for that.
Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Cc: stable@vger.kernel.org
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"Two bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept
KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
|
|
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes for this week:
- The addition of a symbol export for clint_time_val, which has been
inlined into some timex functions and can be used by drivers.
- A fix to avoid calling get_cycles() before the timers have been
probed.
These both only effect !MMU systems"
* tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Check clint_time_val before use
clocksource: clint: Export clint_time_val for modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"A previous commit to prevent AML memory opregions from accessing the
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: permit ACPI core to map kernel memory used for table overrides
|
|
Commit a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes: a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6
because clint_time_val is used even before CLINT driver is probed
at following places:
1. rand_initialize() calls get_cycles() which in-turn uses
clint_time_val
2. boot_init_stack_canary() calls get_cycles() which in-turn
uses clint_time_val
The issue#1 (above) is fixed by providing custom random_get_entropy()
for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of
boot_init_stack_canary() on get_cycles() and this is aligned with the
boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel.
Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.
[6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)
To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-29
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 28 insertions(+), 8 deletions(-).
The main changes are:
1) fix xdp loading regression in libbpf for old kernels, from Andrii.
2) Do not discard packet when NETDEV_TX_BUSY, from Magnus.
3) Fix corner cases in libbpf related to endianness and kconfig, from Tony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent fix for NMI vs. IRQ state tracking missed to apply the cure
to the MCE handler.
Fixes: ba1f2b2eaa2a ("x86/entry: Fix NMI vs IRQ state tracking")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/87mu17ism2.fsf@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
|
|
The user defined label following "fallthrough" is not considered by GCC
and causes build failure.
kernel-source/include/linux/compiler_attributes.h:208:41: error: attribute
'fallthrough' not preceding a case label or default label [-Werror]
208 define fallthrough _attribute((fallthrough_))
^~~~~~~~~~~~~
Fixes: df561f6688fe ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/bpf/20200928090023.38117-1-zhe.he@windriver.com
|
|
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the x86 interrupt code:
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC
code which got wreckaged when the core interrupt code made the
state tracking logic stricter.
That caused the interrupt line to stay masked after switching from
IO/APIC to PIC delivery mode, which obviously prevents interrupts
from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a
void pointer which is then cast to 'void (*fun)(void *).
This breaks Control Flow Integrity checking in clang. Use proper
helper functions for the three variants reuqired"
* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Unbreak check_timer()
x86/irq: Make run_on_irqstack_cond() typesafe
|
|
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.
This patch makes it invalidate the second cache line as well.
Fixes: 0aed55af88345b ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.wiilliams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
...
pudp = pud_offset(&p4d, addr);
This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return. This happens when the
level is folded (on most arches), and that pointer should not be
iterated.
On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.
Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:
// addr = 0x1007ffff000, end = 0x10080001000
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pud_t *pudp;
// pud_offset returns &p4d itself (a pointer to a value on stack)
pudp = pud_offset(&p4d, addr);
do {
// on second iteratation reading "random" stack value
pud_t pud = READ_ONCE(*pudp);
// next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
next = pud_addr_end(addr, end);
...
} while (pudp++, addr = next, addr != end); // pudp++ iterating over stack
return 1;
}
This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").
s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.
What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.
To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions. And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter. This has
already been discussed in
https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1
Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixed FP register access on Loongsoon-3
- added missing 1074 cpu handling
- fixed Loongson2ef build error
* tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: BCM47XX: Remove the needless check with the 1074K
MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()
MIPS: Loongson2ef: Disable Loongson MMI instructions
MIPS: Loongson-3: Fix fp register access if MSA enabled
|
|
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.
Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.
Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff855 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4ea4 ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.
However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.
This is documented in Intel's SDM and seems also to happen on AMD as well.
This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)
In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.
Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200921103805.9102-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.
The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.
That broke an assumption in i8259_make_irq() which invokes
disable_irq_nosync();
irq_set_chip_and_handler();
enable_irq();
Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.
In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.
As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.
Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
|
|
user-configurable
This patch exposes allow_smaller_maxphyaddr to the user as a module parameter.
Since smaller physical address spaces are only supported on VMX, the
parameter is only exposed in the kvm_intel module.
For now disable support by default, and let the user decide if they want
to enable it.
Modifications to VMX page fault and EPT violation handling will depend
on whether that parameter is enabled.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200903141122.72908-1-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As there is no known soc powered by mips 1074K in bcm47xx series,
the check with 1074K is needless. So just remove it.
Link: https://wireless.wiki.kernel.org/en/users/Drivers/b43/soc
Fixes: 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.") split
1074K from the 74K as an unique CPU type, while it missed to add the
'CPU_1074K' in __get_cpu_type(). So let's add it back.
Fixes: 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
It was missed when I was forking Loongson2ef from Loongson64 but
should be applied to Loongson2ef as march=loongson2f
will also enable Loongson MMI in GCC-9+.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64")
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
Sami reported that run_on_irqstack_cond() requires the caller to cast
functions to mismatching types, which trips indirect call Control-Flow
Integrity (CFI) in Clang.
Instead of disabling CFI on that function, provide proper helpers for
the three call variants. The actual ASM code stays the same as that is
out of reach.
[ bp: Fix __run_on_irqstack() prototype to match. ]
Fixes: 931b94145981 ("x86/entry: Provide helpers for executing on the irqstack")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1052
Link: https://lkml.kernel.org/r/87pn6eb5tv.fsf@nanos.tec.linutronix.de
|
|
If MSA is enabled, FPU_REG_WIDTH is 128 rather than 64, then get_fpr64()
/set_fpr64() in the original unaligned instruction emulation code access
the wrong fp registers. This is because the current code doesn't specify
the correct index field, so fix it.
Fixes: f83e4f9896eff614d0f2547a ("MIPS: Loongson-3: Add some unaligned instructions emulation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #2
- Fix handling of S1 Page Table Walk permission fault at S2
on instruction fetch
- Cleanup kvm_vcpu_dabt_iswrite()
|
|
The commit 0f990222108d ("KVM: Check the allocation of pv cpu mask") we
have in 5.9-rc5 has two issue:
1) Compilation fails for !CONFIG_SMP, see:
https://bugzilla.kernel.org/show_bug.cgi?id=209285
2) This commit completely disables PV TLB flush, see
https://lore.kernel.org/kvm/87y2lrnnyf.fsf@vitty.brq.redhat.com/
The allocation problem is likely a theoretical one, if we don't
have memory that early in boot process we're likely doomed anyway.
Let's solve it properly later.
This reverts commit 0f990222108d214a0924d920e6095b58107d7b59.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a lockdep issue to avoid an asserting triggering during
early boot. There shouldn't be any incorrect behavior as the system
isn't concurrent at the time.
- The addition of a missing fence when installing early fixmap
mappings.
- A corretion to the K210 device tree's interrupt map.
- A fix for M-mode timer handling on the K210.
* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
riscv: Fix Kendryte K210 device tree
riscv: Add sfence.vma after early page table changes
RISC-V: Take text_mutex in ftrace_init_nop()
|
|
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime. The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.
This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The Kendryte K210 SoC CLINT is compatible with Sifive clint v0
(sifive,clint0). Fix the Kendryte K210 device tree clint entry to be
inline with the sifive timer definition documented in
Documentation/devicetree/bindings/timer/sifive,clint.yaml.
The device tree clint entry is renamed similarly to u-boot device tree
definition to improve compatibility with u-boot defined device tree.
To ensure correct initialization, the interrup-cells attribute is added
and the interrupt-extended attribute definition fixed.
This fixes boot failures with Kendryte K210 SoC boards.
Note that the clock referenced is kept as K210_CLK_ACLK, which does not
necessarilly match the clint MTIME increment rate. This however does not
seem to cause any problem for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This invalidates local TLB after modifying the page tables during early init as
it's too early to handle suprious faults as we otherwise do.
Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings")
Reported-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Cleaned up the commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
|
