| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal
Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve readability
(Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej
Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain changes
(Juri Lelli)
- Correctly account for allocated bandwidth during hotplug (Juri
Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task() (John
Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible tasks in
sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use the
WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config (Mathieu
Desnoyers)
PSI enhancements:
- Fix race when task wakes up before psi_sched_switch() adjusts flags
(Chengming Zhou)
IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter
Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat
(Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)"
* tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
rseq: Fix rseq unregistration regression
psi: Fix race when task wakes up before psi_sched_switch() adjusts flags
sched, psi: Don't account irq time if sched_clock_irqtime is disabled
sched: Don't account irq time if sched_clock_irqtime is disabled
sched: Define sched_clock_irqtime as static key
sched/fair: Do not compute overloaded status unnecessarily during lb
sched/fair: Do not compute NUMA Balancing stats unnecessarily during lb
x86/topology: Use x86_sched_itmt_flags for PKG domain unconditionally
x86/topology: Remove x86_smt_flags and use cpu_smt_flags directly
x86/itmt: Move the "sched_itmt_enabled" sysctl to debugfs
x86/itmt: Use guard() for itmt_update_mutex
x86/itmt: Convert "sysctl_sched_itmt_enabled" to boolean
sched/core: Prioritize migrating eligible tasks in sched_balance_rq()
sched/debug: Change need_resched warnings to pr_err
sched/fair: Encapsulate set custom slice in a __setparam_fair() function
sched: Fix race between yield_to() and try_to_wake_up()
docs: Update Schedstat version to 17
sched/stats: Print domain name in /proc/schedstat
sched: Move sched domain name out of CONFIG_SCHED_DEBUG
sched: Report the different kinds of imbalances in /proc/schedstat
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups and typo fixes, and also the removal of
the 'disablelapic' boot parameter"
* tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Remove a stray tab in the IO-APIC type string
x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf
Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text
x86/cpu: Fix typo in x86_match_cpu()'s doc
x86/apic: Remove "disablelapic" cmdline option
Documentation: Merge x86-specific boot options doc into kernel-parameters.txt
x86/ioremap: Remove unused size parameter in remapping functions
x86/ioremap: Simplify setup_data mapping variants
x86/boot/compressed: Remove unused header includes from kaslr.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Introduce the generic section-based annotation infrastructure a.k.a.
ASM_ANNOTATE/ANNOTATE (Peter Zijlstra)
- Convert various facilities to ASM_ANNOTATE/ANNOTATE: (Peter Zijlstra)
- ANNOTATE_NOENDBR
- ANNOTATE_RETPOLINE_SAFE
- instrumentation_{begin,end}()
- VALIDATE_UNRET_BEGIN
- ANNOTATE_IGNORE_ALTERNATIVE
- ANNOTATE_INTRA_FUNCTION_CALL
- {.UN}REACHABLE
- Optimize the annotation-sections parsing code (Peter Zijlstra)
- Centralize annotation definitions in <linux/objtool.h>
- Unify & simplify the barrier_before_unreachable()/unreachable()
definitions (Peter Zijlstra)
- Convert unreachable() calls to BUG() in x86 code, as unreachable()
has unreliable code generation (Peter Zijlstra)
- Remove annotate_reachable() and annotate_unreachable(), as it's
unreliable against compiler optimizations (Peter Zijlstra)
- Fix non-standard ANNOTATE_REACHABLE annotation order (Peter Zijlstra)
- Robustify the annotation code by warning about unknown annotation
types (Peter Zijlstra)
- Allow arch code to discover jump table size, in preparation of
annotated jump table support (Ard Biesheuvel)
* tag 'objtool-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Convert unreachable() to BUG()
objtool: Allow arch code to discover jump table size
objtool: Warn about unknown annotation types
objtool: Fix ANNOTATE_REACHABLE to be a normal annotation
objtool: Convert {.UN}REACHABLE to ANNOTATE
objtool: Remove annotate_{,un}reachable()
loongarch: Use ASM_REACHABLE
x86: Convert unreachable() to BUG()
unreachable: Unify
objtool: Collect more annotations in objtool.h
objtool: Collapse annotate sequences
objtool: Convert ANNOTATE_INTRA_FUNCTION_CALL to ANNOTATE
objtool: Convert ANNOTATE_IGNORE_ALTERNATIVE to ANNOTATE
objtool: Convert VALIDATE_UNRET_BEGIN to ANNOTATE
objtool: Convert instrumentation_{begin,end}() to ANNOTATE
objtool: Convert ANNOTATE_RETPOLINE_SAFE to ANNOTATE
objtool: Convert ANNOTATE_NOENDBR to ANNOTATE
objtool: Generic annotation infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- A segmented Reverse Map table (RMP) is a across-nodes distributed
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
* tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Add the Secure TSC feature for SNP guests
x86/tsc: Init the TSC for Secure TSC guests
x86/sev: Mark the TSC in a secure TSC guest as reliable
x86/sev: Prevent RDTSC/RDTSCP interception for Secure TSC enabled guests
x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
x86/sev: Add Secure TSC support for SNP guests
x86/sev: Relocate SNP guest messaging routines to common code
x86/sev: Carve out and export SNP guest messaging init routines
virt: sev-guest: Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL
virt: sev-guest: Remove is_vmpck_empty() helper
x86/sev/docs: Document the SNP Reverse Map Table (RMP)
x86/sev: Add full support for a segmented RMP table
x86/sev: Treat the contiguous RMP table as a single RMP segment
x86/sev: Map only the RMP table entries instead of the full RMP range
x86/sev: Move the SNP probe routine out of the way
x86/sev: Require the RMPREAD instruction after Zen4
x86/sev: Add support for the RMPREAD instruction
x86/sev: Prepare for using the RMPREAD instruction to access the RMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- A bunch of minor cleanups
* tag 'x86_microcode_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Remove ret local var in early_apply_microcode()
x86/microcode/AMD: Have __apply_microcode_amd() return bool
x86/microcode/AMD: Make __verify_patch_size() return bool
x86/microcode/AMD: Remove bogus comment from parse_container()
x86/microcode/AMD: Return bool from find_blobs_in_containers()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Extend resctrl with the capability of total memory bandwidth
monitoring, thus accomodating systems which support only total but
not local memory bandwidth monitoring. Add the respective new mount
options
- The usual cleanups
* tag 'x86_cache_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Document the new "mba_MBps_event" file
x86/resctrl: Add write option to "mba_MBps_event" file
x86/resctrl: Add "mba_MBps_event" file to CTRL_MON directories
x86/resctrl: Make mba_sc use total bandwidth if local is not supported
x86/resctrl: Compute memory bandwidth for all supported events
x86/resctrl: Modify update_mba_bw() to use per CTRL_MON group event
x86/resctrl: Prepare for per-CTRL_MON group mba_MBps control
x86/resctrl: Introduce resctrl_file_fflags_init() to initialize fflags
x86/resctrl: Use kthread_run_on_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU speculation update from Borislav Petkov:
- Add support for AMD hardware which is not affected by SRSO on the
user/kernel attack vector and advertise it to guest userspace
* tag 'x86_bugs_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Advertise SRSO_USER_KERNEL_NO to userspace
x86/bugs: Add SRSO_USER_KERNEL_NO support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Remove the EDAC PowerPC Cell driver due to the removal of the IBM
Cell blades support
- Add a new EDAC driver for Loongson SoCs which reports single-bit
correctable errors
- Extend the SKX and i10NM EDAC drivers to support UV systems which can
have more than 8 nodes
- Add Intel Clearwater Forest server support to i10nm_edac
- Minor fix
* tag 'edac_updates_for_v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/cell: Remove powerpc Cell driver
EDAC: Add an EDAC driver for the Loongson memory controller
EDAC: Fix typos in comments
EDAC/{i10nm,skx,skx_common}: Support UV systems
EDAC/i10nm: Add Intel Clearwater Forest server support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Remove the shared threshold bank hack on AMD and streamline and
simplify it
- Cleanup and sanitize MCA code
* tag 'ras_core_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Remove shared threshold bank plumbing
x86/mce: Remove the redundant mce_hygon_feature_init()
x86/mce: Convert family/model mixed checks to VFM-based checks
x86/mce: Break up __mcheck_cpu_apply_quirks()
x86/mce: Make four functions return bool
x86/mce/threshold: Remove the redundant this_cpu_dec_return()
x86/mce: Make several functions return bool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by
mul_u64_u64_shr()
Thanks to Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe
Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael
Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM),
Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum,
and Zhu Jun.
* tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix argument order to timer_sub()
powerpc/prom_init: Use IS_ENABLED()
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
powerpc: Use str_on_off() helper in check_cache_coherency()
powerpc: Large user copy aware of full:rt:lazy preemption
powerpc: Add preempt lazy support
powerpc/book3s64/hugetlb: Fix disabling hugetlb when fadump is active
powerpc/vdso: Mark the vDSO code read-only after init
powerpc/64: Use get_user() in start_thread()
macintosh: declare ctl_table as const
selftest/powerpc/ptrace: Cleanup duplicate macro definitions
selftest/powerpc/ptrace/ptrace-pkey: Remove duplicate macros
selftest/powerpc/ptrace/core-pkey: Remove duplicate macros
powerpc/8xx: Drop legacy-of-mm-gpiochip.h header
scsi/cxlflash: Deprecate driver
cxl: Deprecate driver
selftests/powerpc: Fix typo in test-vphn.c
powerpc/xmon: Use str_yes_no() helper in dump_one_paca()
powerpc/32: Replace mulhdu() by mul_u64_u64_shr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use the generic muldi3 libgcc function
- Miscellaneous fixes and improvements
* tag 'm68k-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: libgcc: Fix lvalue abuse in umul_ppmm()
m68k: vga: Fix I/O defines
zorro: Constify 'struct bin_attribute'
m68k: atari: Use str_on_off() helper in atari_nvram_proc_read()
m68k: Use kernel's generic muldi3 libgcc function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Select config option KASAN_VMALLOC if KASAN is enabled
- Select config option VMAP_STACK unconditionally
- Implement arch_atomic_inc() / arch_atomic_dec() functions which
result in a single instruction if compiled for z196 or newer
architectures
- Make layering between atomic.h and atomic_ops.h consistent
- Comment s390 preempt_count implementation
- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation
- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.
- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.
- Optimize __preempt_count_dec_and_test()
- Remove __bootdata annotations from declarations in header files
- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code
- Fix suboptimal kernel image base when running make kasan.config
- Remove huge_pte_none() and huge_pte_none_mostly() as are identical to
the generic variants
- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC, and
REGION3_KERNEL_EXEC defines
- Simplify noexec page protection handling and change the page, segment
and region3 protection definitions automatically if the instruction
execution-protection facility is not available
- Save one instruction and prefer EXRL instruction over EX in string,
xor_*(), amode31 and other functions
- Create /dev/diag misc device to fetch diagnose specific information
from the kernel and provide it to userspace
- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl
- Make ccw_device_get_ciw() consistent and use array indices instead of
pointer arithmetic
- s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into
one place
- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code
- Add missing TLB range adjustment in pud_free_tlb()
- Improve topology setup by adding early polarization detection
- Fix length checks in codepage_convert() function
- The generic bitops implementation is nearly identical to the s390
one. Switch to the generic variant and decrease a bit the kernel
image size
- Provide an optimized arch_test_bit() implementation which makes use
of flag output constraint. This generates slightly better code
- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.
- Various other small improvements, fixes, and cleanups
Also, some changes came in through a merge of 'pci-device-recovery'
branch:
- Add PCI error recovery status mechanism
- Simplify and document debug_next_entry() logic
- Split private data allocation and freeing out of debug file open()
and close() operations
- Add debug_dump() function that gets a textual representation of a
debug info (e.g. PCI recovery hardware error logs)
- Add formatted content of pci_debug_msg_id to the PCI report
* tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/futex: Fix FUTEX_OP_ANDN implementation
s390/diag: Add memory topology information via diag310
s390/bitops: Provide optimized arch_test_bit()
s390/bitops: Switch to generic bitops
s390/ebcdic: Fix length decrement in codepage_convert()
s390/ebcdic: Fix length check in codepage_convert()
s390/ebcdic: Use exrl instead of ex
s390/amode31: Use exrl instead of ex
s390/stackleak: Use exrl instead of ex in __stackleak_poison()
s390/lib: Use exrl instead of ex in xor functions
s390/topology: Improve topology detection
s390/tlb: Add missing TLB range adjustment
s390/pkey: Constify 'struct bin_attribute'
s390/sclp: Constify 'struct bin_attribute'
s390/pci: Constify 'struct bin_attribute'
s390/ipl: Constify 'struct bin_attribute'
s390/crypto/cpacf: Constify 'struct bin_attribute'
s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
s390/cio: Use array indices instead of pointer arithmetic
s390/qdio: Rename feature flag aif_osa to aif_qdio
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
|
|
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Back when we added SMAP support, all versions of binutils didn't
necessarily understand the 'clac' and 'stac' instructions. So we
implemented those instructions manually as ".byte" sequences.
But we've since upgraded the minimum version of binutils to version
2.25, and that included proper support for the SMAP instructions, and
there's no reason for us to use some line noise to express them any
more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Mark serialize() noinstr so that it can be used from instrumentation-
free code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding
per-CPU value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper
x86 maintainers review, went in and broke a bunch of things
* tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Make serialize() always_inline
x86/fred: Fix the FRED RSP0 MSR out of sync with its per-CPU cache
x86: Disable EXECMEM_ROX support
|
|
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
|
|
* for-next/misc:
arm64: Remove duplicate included header
arm64/Kconfig: Drop EXECMEM dependency from ARCH_WANTS_EXECMEM_LATE
arm64: asm: Fix typo in pgtable.h
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Drop INIT_MM_CONTEXT()
|
|
* for-next/cpufeature:
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
arm64/sysreg: Get rid of the TCR2_EL1x SysregFields
arm64/sysreg: Allow a 'Mapping' descriptor for system registers
arm64/cpufeature: Refactor conditional logic in init_cpu_ftr_reg()
arm64: cpufeature: Add HAFT to cpucap_is_possible()
|
|
This driver can no longer be built since support for IBM Cell Blades was
removed, in particular PPC_CELL_COMMON.
Remove the driver.
[ bp: Remove EDAC_CELL from Cell's defconfig too. ]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241218105523.416573-23-mpe@ellerman.id.au
|
|
In order to allow serialize() to be used from noinstr code, make it
__always_inline.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com
|
|
Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags,
remove IRQ*_MOVE_PCNTXT and related code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de
|
|
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
|
|
The futex operation FUTEX_OP_ANDN is supposed to implement
*(int *)UADDR2 &= ~OPARG;
The s390 implementation just implements an AND instead of ANDN.
Add the missing bitwise not operation to oparg to fix this.
This is broken since nearly 19 years, so it looks like user space is
not making use of this operation.
Fixes: 3363fbdd6fb4 ("[PATCH] s390: futex atomic operations")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Introduce diag310 and memory topology related subcodes.
Provide memory topology information obtanied from diag310 to userspace
via diag ioctl.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Commented out since 2011....
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Brian Cain <bcain@quicinc.com>
Link: https://lore.kernel.org/all/20241210103335.437630614@linutronix.de
|
|
Nothing uses the actual functionality and the MCIP controller sets the
flags which disables the deferred affinity change. The other interrupt
controller does not support affinity setting at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Vineet Gupta <vgupta@kernel.org> # arch/arc/
Link: https://lore.kernel.org/all/20241210103335.373392568@linutronix.de
|
|
Add module build support in Kconfig for the TI SCI interrupt aggregator
driver. The driver's default build is built-in and it also depends on
ARCH_K3 as the driver uses some 64 bit ops and should only be built for
64-bit platforms.
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/all/20241224-timodules-v4-2-c5e010f58e2c@baylibre.com
|
|
Add module build support in Kconfig for the TI SCI interrupt router
driver. This driver depends on the TI sci firmware driver which aready
supports module build.
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/all/20241224-timodules-v4-1-c5e010f58e2c@baylibre.com
|
|
The FRED RSP0 MSR is only used for delivering events when running
userspace. Linux leverages this property to reduce expensive MSR
writes and optimize context switches. The kernel only writes the
MSR when about to run userspace *and* when the MSR has actually
changed since the last time userspace ran.
This optimization is implemented by maintaining a per-CPU cache of
FRED RSP0 and then checking that against the value for the top of
current task stack before running userspace.
However cpu_init_fred_exceptions() writes the MSR without updating
the per-CPU cache. This means that the kernel might return to
userspace with MSR_IA32_FRED_RSP0==0 when it needed to point to the
top of current task stack. This would induce a double fault (#DF),
which is bad.
A context switch after cpu_init_fred_exceptions() can paper over
the issue since it updates the cached value. That evidently
happens most of the time explaining how this bug got through.
Fix the bug through resynchronizing the FRED RSP0 MSR with its
per-CPU cache in cpu_init_fred_exceptions().
Fixes: fe85ee391966 ("x86/entry: Set FRED RSP0 on return to userspace instead of context switch")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250110174639.1250829-1-xin%40zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM.
All patches are singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc: fix softlockup in __read_vmcore (part 2)
mm: fix assertion in folio_end_read()
mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled.
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
zram: fix potential UAF of zram table
selftests/mm: set allocated memory to non-zero content in cow test
mm: clear uffd-wp PTE/PMD state on mremap()
module: fix writing of livepatch relocations in ROX text
mm: zswap: properly synchronize freeing resources during CPU hotunplug
Revert "mm: zswap: fix race between [de]compression and CPU hotunplug"
hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode
mm: fix div by zero in bdi_ratio_from_pages
x86/execmem: fix ROX cache usage in Xen PV guests
filemap: avoid truncating 64-bit offset to 32 bits
tools: fix atomic_set() definition to set the value correctly
mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit"
scripts/decode_stacktrace.sh: fix decoding of lines with an additional info
mm/kmemleak: fix percpu memory leak detection failure
|
|
x86_sched_itmt_flags() returns SD_ASYM_PACKING if ITMT support is
enabled by the system. Without ITMT support being enabled, it returns 0
similar to current x86_die_flags() on non-Hybrid systems
(!X86_HYBRID_CPU and !X86_FEATURE_AMD_HETEROGENEOUS_CORES)
On Intel systems that enable ITMT support, either the MC domain
coincides with the PKG domain, or in case of multiple MC groups
within a PKG domain, either Sub-NUMA Cluster (SNC) is enabled or the
processor features Hybrid core layout (X86_HYBRID_CPU) which leads to
three distinct possibilities:
o If PKG and MC domains coincide, PKG domain is degenerated by
sd_parent_degenerate() when building sched domain topology.
o If SNC is enabled, PKG domain is never added since
"x86_has_numa_in_package" is set and the topology will instead contain
NODE and NUMA domains.
o On X86_HYBRID_CPU which contains multiple MC groups within the PKG,
the PKG domain requires x86_sched_itmt_flags().
Thus, on Intel systems that contains multiple MC groups within the PKG
and enables ITMT support, the PKG domain requires
x86_sched_itmt_flags(). In all other cases PKG domain is either never
added or is degenerated. Thus, returning x86_sched_itmt_flags()
unconditionally at PKG domain on Intel systems should not lead to any
functional changes.
On AMD systems with multiple LLCs (MC groups) within a PKG domain,
enabling ITMT support requires setting SD_ASYM_PACKING to the PKG domain
since the core rankings are assigned PKG-wide.
Core rankings on AMD processors is currently set by the amd-pstate
driver when Preferred Core feature is supported. A subset of systems that
support Preferred Core feature can be detected using
X86_FEATURE_AMD_HETEROGENEOUS_CORES however, this does not cover all the
systems that support Preferred Core ranking.
Detecting Preferred Core support on AMD systems requires inspecting CPPC
Highest Perf on all present CPUs and checking if it differs on at least
one CPU. Previous suggestion to use a synthetic feature to detect
Preferred Core support [1] was found to be non-trivial to implement
since BSP alone cannot detect if Preferred Core is supported and by the
time AP comes up, alternatives are patched and setting a X86_FEATURE_*
then is not possible.
Since x86 processors enabling ITMT support that consists multiple
non-NUMA MC groups within a PKG requires SD_ASYM_PACKING flag set at the
PKG domain, return x86_sched_itmt_flags unconditionally for the PKG
domain.
Since x86_die_flags() would have just returned x86_sched_itmt_flags()
after the change, remove the unnecessary wrapper and pass
x86_sched_itmt_flags() directly as the flags function.
Fixes: f3a052391822 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-6-kprateek.nayak@amd.com
|
|
x86_*_flags() wrappers were introduced with commit d3d37d850d1d
("x86/sched: Add SD_ASYM_PACKING flags to x86 ITMT CPU") to add
x86_sched_itmt_flags() in addition to the default domain flags for SMT
and MC domain.
commit 995998ebdebd ("x86/sched: Remove SD_ASYM_PACKING from the
SMT domain flags") removed the ITMT flags for SMT domain but not the
x86_smt_flags() wrappers which directly returns cpu_smt_flags().
Remove x86_smt_flags() and directly use cpu_smt_flags() to derive the
flags for SMT domain. No functional changes intended.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-5-kprateek.nayak@amd.com
|
|
"sched_itmt_enabled" was only introduced as a debug toggle for any funky
ITMT behavior. Move the sysctl controlled from
"/proc/sys/kernel/sched_itmt_enabled" to debugfs at
"/sys/kernel/debug/x86/sched_itmt_enabled" with a notable change that a
cat on the file will return "Y" or "N" instead of "1" or "0" to
indicate that feature is enabled or disabled respectively. Either "0" or
"N" (or any string that kstrtobool() interprets as false) can be written
to the file will disable the feature, and writing either "1" or "Y" (or
any string that kstrtobool() interprets as true) will enable it back
when the platform supports ITMT ranking.
Since ITMT is x86 specific (and PowerPC uses SD_ASYM_PACKING too), the
toggle was moved to "/sys/kernel/debug/x86/" as opposed to
"/sys/kernel/debug/sched/"
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-4-kprateek.nayak@amd.com
|
|
Use guard() for itmt_update_mutex which avoids the extra mutex_unlock()
in the bailout and return paths.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-3-kprateek.nayak@amd.com
|
|
In preparation to move "sysctl_sched_itmt_enabled" to debugfs, convert
the unsigned int to bool since debugfs readily exposes boolean fops
primitives (debugfs_read_file_bool, debugfs_write_file_bool) which can
streamline the conversion.
Since the current ctl_table initializes extra1 and extra2 to SYSCTL_ZERO
and SYSCTL_ONE respectively, the value of "sysctl_sched_itmt_enabled"
can only be 0 or 1 and this datatype conversion should not cause any
functional changes.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-2-kprateek.nayak@amd.com
|
|
The whole module_writable_address() nonsense made a giant mess of
alternative.c, not to mention it still contains bugs -- notable some of the
CFI variants crash and burn.
Mike has been working on patches to clean all this up again, but given the
current state of things, this stuff just isn't ready.
Disable for now, lets try again next cycle.
Fixes: 5185e7f9f3bd ("x86/module: enable ROX caches for module text on 64 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250113112934.GA8385@noisy.programming.kicks-ass.net
|
|
Provide an optimized arch_test_bit() implementation which makes use of
flag output constraint. This generates slightly better code:
bloat-o-meter:
add/remove: 51/19 grow/shrink: 450/2444 up/down: 25198/-49136 (-23938)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The generic bitops implementation is nearly identical to the s390
implementation therefore switch to the generic variant.
This results in a small kernel image size decrease. This is because for
the generic variant the nr parameter for most bitops functions is of
type unsigned int while the s390 variant uses unsigned long.
bloat-o-meter:
add/remove: 670/670 grow/shrink: 167/209 up/down: 21440/-21792 (-352)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The inline assembly uses the ahi instruction to decrement and test
whether more than 256 bytes are left for conversion. But the nr
variable passed is of type unsigned long. Therefore use aghi.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The current code compares whether the nr argument is less or equal to
zero. As nr is of type unsigned long, this isn't correct. Fix this by just
testing for zero. This is also reported by checkpatch:
unsignedLessThanZero: Checking if unsigned expression 'nr--' is less
than zero.
Reported-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
