| Age | Commit message (Collapse) | Author |
|---|
|
The __tlb_remove_table_one() in x86 does not contain architecture-specific
content, so move it to the generic file.
Link: https://lkml.kernel.org/r/aab8a449bc67167943fd2cb5aab0a3a23b7b1cd7.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For the generic tlb_remove_table(), it is implemented in the following two
forms:
1) CONFIG_MMU_GATHER_TABLE_FREE is enabled
tlb_remove_table
--> generic __tlb_remove_table()
2) CONFIG_MMU_GATHER_TABLE_FREE is disabled
tlb_remove_table
--> tlb_remove_page
For case 1), the pagetable_dtor() has already been moved to generic
__tlb_remove_table().
For case 2), now only arm will call tlb_remove_table()/tlb_remove_ptdesc()
when CONFIG_MMU_GATHER_TABLE_FREE is disabled. Let's move
pagetable_dtor() completely to generic tlb_remove_table(), so that the
architectures can follow more easily.
Link: https://lkml.kernel.org/r/0c733ac867b287ec08190676496d1decebf49da2.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several architectures (arm, arm64, riscv and x86) define exactly the same
__tlb_remove_table(), just introduce generic __tlb_remove_table() to
eliminate these duplications.
The s390 __tlb_remove_table() is nearly the same, so also make s390
__tlb_remove_table() version generic.
Link: https://lkml.kernel.org/r/ea372633d94f4d3f9f56a7ec5994bf050bf77e39.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Call pagetable_dtor() for PMD|PUD|P4D tables just before ptdesc is freed -
same as it is done for PTE tables. That allows consolidating TLB free
paths for all table types.
Link: https://lkml.kernel.org/r/ac69360a5f3350ebb2f63cd14b7b45316a130ee4.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/27b3cdc8786bebd4f748380bf82f796482718504.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert __tlb_remove_table() to use struct ptdesc, which will help to move
pagetable_dtor() to __tlb_remove_table().
And page tables shouldn't have swap cache, so use pagetable_free() instead
of free_page_and_swap_cache() to free page table pages.
Link: https://lkml.kernel.org/r/39f60f93143ff77cf5d6b3c3e75af0ffc1480adb.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Page tables shouldn't have swap cache, so use pagetable_free() instead of
free_page_and_swap_cache() to free page table pages.
By the way, move the comment above __tlb_remove_table() to
riscv_tlb_remove_ptdesc(), it will be more appropriate.
Link: https://lkml.kernel.org/r/b89d77c965507b1b102cbabe988e69365cb288b6.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Page tables shouldn't have swap cache, so use pagetable_free() instead of
free_page_and_swap_cache() to free page table pages.
Link: https://lkml.kernel.org/r/cf4b847caf390f96a3e3d534dacb2c174e16c154.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Page tables shouldn't have swap cache, so use pagetable_free() instead of
free_page_and_swap_cache() to free page table pages.
Link: https://lkml.kernel.org/r/327b4b8990729edd4ce97d9d5acbdaff2d9fa1d1.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor()
to do this.
Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used). This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like PMD and PTE level page table, also add statistics for PUD and P4D
page table.
Link: https://lkml.kernel.org/r/4707dffce228ccec5c6662810566dd12b5741c4b.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like other levels of page tables, also use mmu gather mechanism to free
p4d level page table.
Link: https://lkml.kernel.org/r/3fd48525397b34a64f7c0eb76746da30814dc941.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like other levels of page tables, add statistics for P4D level page table.
Link: https://lkml.kernel.org/r/d55fe3c286305aae84457da9e1066df99b3de125.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Four architectures currently implement 5-level pgtables: arm64, riscv, x86
and s390. The first three have essentially the same implementation for
p4d_alloc_one() and p4d_free(), so we've got an opportunity to reduce
duplication like at the lower levels.
Provide a generic version of p4d_alloc_one() and p4d_free(), and make use
of it on those architectures.
Their implementation is the same as at PUD level, except that p4d_free()
performs a runtime check by calling mm_p4d_folded(). 5-level pgtables
depend on a runtime-detected hardware feature on all supported
architectures, so we might as well include this check in the generic
implementation. No runtime check is required in p4d_alloc_one() as the
top-level p4d_alloc() already does the required check.
Link: https://lkml.kernel.org/r/26d69c74a29183ecc335b9b407040d8e4cd70c6a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "move pagetable_*_dtor() to __tlb_remove_table()", v5.
As proposed [1] by Peter Zijlstra below, this patch series aims to move
pagetable_*_dtor() into __tlb_remove_table(). This will cleanup
pagetable_*_dtor() a bit and more gracefully fix the UAF issue [2]
reported by syzbot.
: Notably:
:
: - s390 pud isn't calling the existing pagetable_pud_[cd]tor()
: - none of the p4d things have pagetable_p4d_[cd]tor() (x86,arm64,s390,riscv)
: and they have inconsistent accounting
: - while much of the _ctor calls are in generic code, many of the _dtor
: calls are in arch code for hysterial raisins, this could easily be
: fixed
: - if we fix ptlock_free() to handle NULL, then all the _dtor()
: functions can use it, and we can observe they're all identical
: and can be folded
:
: after all that cleanup, you can move the _dtor from *_free_tlb() into
: tlb_remove_table() -- which for the above case, would then have it called
: from __tlb_remove_table_free().
This patch (of 16):
{pmd,pud,p4d}_alloc_one() is never called if the corresponding page table
level is folded, as {pmd,pud,p4d}_alloc() already does the required check.
We can therefore remove the runtime page table level checks in
{pud,p4d}_alloc_one. The PUD helper becomes equivalent to the generic
version, so we remove it altogether.
This is consistent with the way arm64 and x86 handle this situation
(runtime check in p4d_free() only).
Link: https://lkml.kernel.org/r/cover.1736317725.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/93a1c6bddc0ded9f1a9f15658c1e4af5c93d1194.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory hotplug presently auto-onlines memory into a zone the kernel deems
appropriate if CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
The memhp_default_state boot param enables runtime config, but it's not
possible to do this at build-time.
Remove CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE, and replace it with
CONFIG_MHP_DEFAULT_ONLINE_TYPE_* choices that sync with the boot param.
Selections:
CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE
=> mhp_default_online_type = "offline"
Memory will not be onlined automatically.
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO
=> mhp_default_online_type = "online"
Memory will be onlined automatically in a zone deemed.
appropriate by the kernel.
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL
=> mhp_default_online_type = "online_kernel"
Memory will be onlined automatically.
The zone may allow kernel data (e.g. ZONE_NORMAL).
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE
=> mhp_default_online_type = "online_movable"
Memory will be onlined automatically.
The zone will be ZONE_MOVABLE.
Default to CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE to match the existing
default CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=n behavior.
Existing users of CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y should use
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO.
[gourry@gourry.net: update KConfig comments]
Link: https://lkml.kernel.org/r/20241226182918.648799-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20241220210709.300066-1-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
|
|
Pull OpenRISC updates from Stafford Horne:
- Added support for restartable sequences (me)
- Migration to Generic built-in DTB (Masahiro Yamada)
* tag 'for-linus' of https://github.com/openrisc/linux:
rseq/selftests: Add support for OpenRISC
openrisc: Add support for restartable sequences
openrisc: Add HAVE_REGS_AND_STACK_ACCESS_API support
openrisc: migrate to the generic rule for built-in DTB
|
|
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Introduce a new set of Hyper-V headers in include/hyperv and replace
the old hyperv-tlfs.h with the new headers (Nuno Das Neves)
- Fixes for the Hyper-V VTL mode (Roman Kisel)
- Fixes for cpu mask usage in Hyper-V code (Michael Kelley)
- Document the guest VM hibernation behaviour (Michael Kelley)
- Miscellaneous fixes and cleanups (Jacob Pan, John Starks, Naman Jain)
* tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Documentation: hyperv: Add overview of guest VM hibernation
hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id()
hyperv: Do not overlap the hvcall IO areas in get_vtl()
hyperv: Enable the hypercall output page for the VTL mode
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
Drivers: hv: vmbus: Log on missing offers if any
Drivers: hv: vmbus: Wait for boot-time offers during boot and resume
uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
iommu/hyper-v: Don't assume cpu_possible_mask is dense
Drivers: hv: Don't assume cpu_possible_mask is dense
x86/hyperv: Don't assume cpu_possible_mask is dense
hyperv: Remove the now unused hyperv-tlfs.h files
hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
hyperv: Add new Hyper-V headers in include/hyperv
hyperv: Clean up unnecessary #includes
hyperv: Move hv_connection_id to hyperv-tlfs.h
|
|
SETUP_SLEEP should only save the GPR context, which is symmetric to
SETUP_WAKEUP, so move the acpi_saved_sp handling out of SETUP_SLEEP.
Move "addi.d sp, sp, PT_SIZE" into SETUP_WAKEUP for the same reason.
No functional changes.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1. Early return for user mode triggered exception with all types.
2. Give a chance to call fixup_exception() for default types (like
S390).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit cca98e9f8b5ebcd964 ("mm: enforce that vmap can't map pages
executable") enforces the W^X protection by not allowing remapping
existing pages as executable. Add LoongArch bits so that LoongArch
can benefit the same protection.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Correct the __switch_to() prototype in comments, keep it be the same as
the declaration in switch_to.h.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
SMT cores and their sibling cores share the same L1 and L2 private
caches (of course last level cache is also shared), so correct the
cacheinfo sharing information to let shared_cpu_map correctly reflect
this relationship.
Below is the output of "lscpu" on Loongson-3A6000 (4 cores, 8 threads).
1. Before patch:
L1d: 512 KiB (8 instances)
L1i: 512 KiB (8 instances)
L2: 2 MiB (8 instances)
L3: 16 MiB (1 instance)
2. After patch:
L1d: 256 KiB (4 instances)
L1i: 256 KiB (4 instances)
L2: 1 MiB (4 instances)
L3: 16 MiB (1 instance)
Reported-by: Chao Li <lichao@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As per arch spec, maximum timer bits is configurable and should not be
hardcoded in any way.
Probe timer bits from PRCFG1 and use that to determine the clockevent's
max_delta to be conformance.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When ARCH_IOREMAP is enabled, we are using always accessible DMW for
ioremap(). It makes no sense to create a dedicated mapping for earlycon
given that we can access the region via DMW.
Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is selected. This can ease
debugging for early mapping issues.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch architecture changes for 6.14 depend on the irq-core changes
(AVECINTC fixes) to work well for NUMA, so merge them to create a base.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- samsung: add gs101-mbox driver
- microchip: add sbi-ipc driver
- zynqmp: fix invalid __percpu annotation
- qcom: add IPQ5424 APCS compatible
- mpfs fix copy and paste bug
- th1520: Fix NULL vs IS_ERR() and a memory corruption bug
- tegra-hsp: clear mailbox before using message
* tag 'mailbox-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
riscv: export __cpuid_to_hartid_map
riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
mailbox: th1520: Fix memory corruption due to incorrect array size
mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()
MAINTAINERS: add entry for Samsung Exynos mailbox driver
mailbox: add Samsung Exynos driver
dt-bindings: mailbox: add google,gs101-mbox
mailbox: qcom: Add support for IPQ5424 APCS IPC
dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatible
mailbox: qcom-ipcc: Reset CLEAR_ON_RECV_RD if set from boot firmware
mailbox: add Microchip IPC support
dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
mailbox: tegra-hsp: Clear mailbox before using message
mailbox: mpfs: fix copy and paste bug in probe
mailbox: th1520: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a number of new drivers get added to the defconfig to
support additional hardware.
The stm32 defconfig also turns off a few options to optimize for size"
* tag 'soc-defconfig-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
dt-bindings: soc: samsung: exynos-pmu: Add exynos990-pmu compatible
arm64: defconfig: enable Maxim TCPCI driver
ARM: configs: stm32: Remove useless flags in STM32 defconfig
ARM: configs: stm32: Remove CRYPTO in STM32 defconfig
ARM: configs: stm32: Clean STM32 defconfig
ARM: configs: stm32: Remove FLASH_MEM_BASE and FLASH_SIZE in STM32 defconfig
arm64: defconfig: Enable pinctrl-based I2C mux
arm64: defconfig: Enable Rockchip extensions for Synopsys DW HDMI QP
arm64: defconfig: Enable RFKILL GPIO
arm64: defconfig: Enable TI K3 M4 remoteproc driver
arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
arm64: defconfig: Enable basic Qualcomm SM8750 SoC drivers
arm64: defconfig: remove obsolete CONFIG_SM_DISPCC_8650
arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
arm64: defconfig: Enable sa8775p clock controllers
arm64: defconfig: Enable MediaTek DWMAC
arm64: defconfig: Enable sound for MT8188
arm64: defconfig: Enable MediaTek STAR Ethernet MAC
riscv: defconfig: enable pinctrl and dwmac support for TH1520
arm64: defconfig: Enable Amazon Elastic Network Adaptor
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"Two new SoC families are added here, with devicetree files and a
little bit of infrastructure to allow booting:
- Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
Processor) cores for computation, and two small Cortex-A53 cores
that run the operating system.
- SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
compatible CPU cores with vector support.
Also marketed at AI applications, it has a much slower NPU compared
to BLZP1600, but in turn focuses on the CPU performance"
* tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree
MAINTAINER: Add entry for Blaize SoC
arm64: defconfig: Enable Blaize BLZP1600 platform
arm64: dts: Add initial support for Blaize BLZP1600 CB2
arm64: Add Blaize BLZP1600 SoC family
dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
dt-bindings: Add Blaize vendor prefix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC arm platform code updates from Arnd Bergmann:
"The updates here add code for the Microchip SAMA7D65 SoC, as well as
minor bugfixes for OMAP"
* tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: Fix up the Retu IRQ on Nokia 770
ARM: omap2plus_defconfig: enable charger of TWL603X
ARM: at91: add new SoC sama7d65
ARM: at91: pm: change BU Power Switch to automatic mode
soc: atmel: fix device_node release in atmel_soc_device_init()
ARM: OMAP2+: Fix a typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Temporarily disable jump label support to avoid kernel crash with
32-bit kernel
- Add vdso linker script to 'targets' instead of extra-y
- Remove parisc versions of memcpy_toio and memset_io
* tag 'parisc-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Temporarily disable jump label support
parisc: add vdso linker script to 'targets' instead of extra-y
parisc: Remove memcpy_toio and memset_io
|
|
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4eeb ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove physical address skcipher walking
- Fix boot-up self-test race
Algorithms:
- Optimisations for x86/aes-gcm
- Optimisations for x86/aes-xts
- Remove VMAC
- Remove keywrap
Drivers:
- Remove n2
Others:
- Fixes for padata UAF
- Fix potential rhashtable deadlock by moving schedule_work outside
lock"
* tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits)
rhashtable: Fix rhashtable_try_insert test
dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE
dt-bindings: crypto: qcom,prng: Document SM8750 RNG
dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine
crypto: asymmetric_keys - Remove unused key_being_used_for[]
padata: avoid UAF for reorder_work
padata: fix UAF in padata_reorder
padata: add pd get/put refcnt helper
crypto: skcipher - call cond_resched() directly
crypto: skcipher - optimize initializing skcipher_walk fields
crypto: skcipher - clean up initialization of skcipher_walk::flags
crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt()
crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW
crypto: skcipher - remove redundant clamping to page size
crypto: skcipher - remove unnecessary page alignment of bounce buffer
crypto: skcipher - document skcipher_walk_done() and rename some vars
crypto: omap - switch from scatter_walk to plain offset
crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data
crypto: bcm - Drop unused setting of local 'ptr' variable
crypto: hisilicon/qm - support new function communication
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Intel Trust Domain updates.
The existing TDX code needs a _bit_ of metadata from the TDX module.
But KVM is going to need a bunch more very shortly. Rework the
interface with the TDX module to be more consistent and handle the new
higher volume.
The TDX module has added a few new features. The first is a promise
not to clobber RBP under any circumstances. Basically the kernel now
will refuse to use any modules that don't have this promise. Second,
enable the new "REDUCE_VE" feature. This ensures that the TDX module
will not send some silly virtualization exceptions that the guest had
no good way to handle anyway.
- Centralize global metadata infrastructure
- Use new TDX module features for exception suppression and RBP
clobbering"
* tag 'x86_tdx_for_6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Require the module to assert it has the NO_RBP_MOD mitigation
x86/virt/tdx: Switch to use auto-generated global metadata reading code
x86/virt/tdx: Use dedicated struct members for PAMT entry sizes
x86/virt/tdx: Use auto-generated code to read global metadata
x86/virt/tdx: Start to track all global metadata in one structure
x86/virt/tdx: Rename 'struct tdx_tdmr_sysinfo' to reflect the spec better
x86/tdx: Dump attributes and TD_CTLS on boot
x86/tdx: Disable unnecessary virtualization exceptions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- A large and involved preparatory series to pave the way to add
exception handling for relocate_kernel - which will be a debugging
facility that has aided in the field to debug an exceptionally hard
to debug early boot bug. Plus assorted cleanups and fixes that were
discovered along the way, by David Woodhouse:
- Clean up and document register use in relocate_kernel_64.S
- Use named labels in swap_pages in relocate_kernel_64.S
- Only swap pages for ::preserve_context mode
- Allocate PGD for x86_64 transition page tables separately
- Copy control page into place in machine_kexec_prepare()
- Invoke copy of relocate_kernel() instead of the original
- Move relocate_kernel to kernel .data section
- Add data section to relocate_kernel
- Drop page_list argument from relocate_kernel()
- Eliminate writes through kernel mapping of relocate_kernel page
- Clean up register usage in relocate_kernel()
- Mark relocate_kernel page as ROX instead of RWX
- Disable global pages before writing to control page
- Ensure preserve_context flag is set on return to kernel
- Use correct swap page in swap_pages function
- Fix stack and handling of re-entry point for ::preserve_context
- Mark machine_kexec() with __nocfi
- Cope with relocate_kernel() not being at the start of the page
- Use typedef for relocate_kernel_fn function prototype
- Fix location of relocate_kernel with -ffunction-sections (fix by Nathan Chancellor)
- A series to remove the last remaining absolute symbol references from
.head.text, and enforce this at build time, by Ard Biesheuvel:
- Avoid WARN()s and panic()s in early boot code
- Don't hang but terminate on failure to remap SVSM CA
- Determine VA/PA offset before entering C code
- Avoid intentional absolute symbol references in .head.text
- Disable UBSAN in early boot code
- Move ENTRY_TEXT to the start of the image
- Move .head.text into its own output section
- Reject absolute references in .head.text
- The above build-time enforcement uncovered a handful of bugs of
essentially non-working code, and a wrokaround for a toolchain bug,
fixed by Ard Biesheuvel as well:
- Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
- Disable UBSAN on SEV code that may execute very early
- Disable ftrace branch profiling in SEV startup code
- And miscellaneous cleanups:
- kexec_core: Add and update comments regarding the KEXEC_JUMP flow (Rafael J. Wysocki)
- x86/sysfs: Constify 'struct bin_attribute' (Thomas Weißschuh)"
* tag 'x86-boot-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
x86/sev: Disable ftrace branch profiling in SEV startup code
x86/kexec: Use typedef for relocate_kernel_fn function prototype
x86/kexec: Cope with relocate_kernel() not being at the start of the page
kexec_core: Add and update comments regarding the KEXEC_JUMP flow
x86/kexec: Mark machine_kexec() with __nocfi
x86/kexec: Fix location of relocate_kernel with -ffunction-sections
x86/kexec: Fix stack and handling of re-entry point for ::preserve_context
x86/kexec: Use correct swap page in swap_pages function
x86/kexec: Ensure preserve_context flag is set on return to kernel
x86/kexec: Disable global pages before writing to control page
x86/sev: Don't hang but terminate on failure to remap SVSM CA
x86/sev: Disable UBSAN on SEV code that may execute very early
x86/boot/64: Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
x86/sysfs: Constify 'struct bin_attribute'
x86/kexec: Mark relocate_kernel page as ROX instead of RWX
x86/kexec: Clean up register usage in relocate_kernel()
x86/kexec: Eliminate writes through kernel mapping of relocate_kernel page
x86/kexec: Drop page_list argument from relocate_kernel()
x86/kexec: Add data section to relocate_kernel
x86/kexec: Move relocate_kernel to kernel .data section
...
|
|
On some systems, the same CPU (with the same APIC ID) is assigned a
different logical CPU id after commit ec9aedb2aa1a ("x86/acpi: Ignore
invalid x2APIC entries").
This means that Linux enumerates the CPUs in a different order, which
violates ACPI specification[1] that states:
"OSPM should initialize processors in the order that they appear in
the MADT"
The problematic commit parses all LAPIC entries before any x2APIC
entries, aiming to ignore x2APIC entries with APIC ID < 255 when valid
LAPIC entries exist. However, it disrupts the CPU enumeration order on
systems where x2APIC entries precede LAPIC entries in the MADT.
Fix this problem by:
1) Parsing LAPIC entries first without registering them in the
topology to evaluate whether valid LAPIC entries exist.
2) Restoring the MADT in order parser which invokes either the LAPIC
or the X2APIC parser function depending on the entry type.
The X2APIC parser still ignores entries < 0xff in case that #1 found
valid LAPIC entries independent of their position in the MADT table.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#madt-processor-local-apic-sapic-structure-entry-order
Cc: All applicable <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/all/20241010213136.668672-1-jmattson@google.com/
Fixes: ec9aedb2aa1a ("x86/acpi: Ignore invalid x2APIC entries")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250117081420.4046737-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 6.14, please pull the following:
- Stefan enables the pinctrl-based I2C mux driver which is used on
Raspberry Pi 4 based systems since we switched the Device Tree files
to use the i2c mux representation
* tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable pinctrl-based I2C mux
Link: https://lore.kernel.org/r/20250123203302.1491843-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because the
system can't wake up from suspend (Werner Sembach)
* pci/pm:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.14
- New machines
* IBM SPB1 AST2600 BMC machine, a Sapphire Rapids x86 server
* Ampre Mt Jefferson AST2600 BMC
- Updates to mtmitchell, rainier, blueridge, everest, fuji, system1,
harma, catalina and minerva
- A big rework of yosemite4
* tag 'aspeed-6.14-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (55 commits)
ARM: dts: aspeed: yosemite4: adjust secondary flash name
ARM: dts: aspeed: system1: Use crps PSU driver
ARM: dts: aspeed: minerva: add second source RTC
ARM: dts: aspeed: minerva: add bmc ready led setting
ARM: dts: aspeed: minerva: add i/o expanders on each FCB
ARM: dts: aspeed: minerva: add i/o expanders on bus 0
ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP
ARM: dts: aspeed: catalina: revise ltc4287 shunt-resistor value
arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs
ARM: dts: aspeed: Blueridge and Fuji: Fix LED node names
arm: dts: aspeed: Everest and Fuji: Add VRM presence gpio expander
ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
dt-bindings: arm: aspeed: add IBM SBP1 board
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC
dt-bindings: arm: aspeed: add Mt. Jefferson board
ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board
ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards
ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards
ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards
ARM: dts: aspeed: yosemite4: correct the compatible string for max31790
...
Link: https://lore.kernel.org/r/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/newsoc
RISC-V SpacemiT DT changes for 6.14
This adds support for the SpacemiT K1 SoC and the Banana Pi F3
board using it:
- basic device tree support
- pinctrl dt node info
- update MAINTAINERS info
* tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree
Link: https://wiki.banana-pi.org/Banana_Pi_BPI-F3
Link: https://www.spacemit.com/en/key-stone-k1/
Link: https://lore.kernel.org/r/20250117004911-GYA25021@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
|
|
efi_memattr_init() added a sanity check to avoid firmware caused corruption.
The check is based on efi memmap entry numbers, but kexec only takes the
runtime related memmap entries thus this caused many false warnings, see
below thread for details:
https://lore.kernel.org/all/20250108215957.3437660-2-usamaarif642@gmail.com/
Ard suggests to skip the efi memattr table in kexec, this makes sense because
those memattr fixups are not critical.
Fixes: 8fbe4c49c0cc ("efi/memattr: Ignore table if the size is clearly bogus")
Cc: <stable@vger.kernel.org> # v6.13+
Reported-by: Breno Leitao <leitao@debian.org>
Reported-and-tested-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
|
|
Fix C&P error left unnoticed during the reviews. The FORMAT field spans
over bits 29-31, not 24-27 of the CTR register.
Closes: https://lore.kernel.org/linux-arm-msm/01515ea0-c6f0-479f-9da5-764d9ee79ed6@samsung.com/
Fixes: a9ff94477836 ("ARM: 9433/2: implement cacheinfo support")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
