summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2023-11-06Merge tag 'media/v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - the old V4L2 core videobuf kAPI was finally removed. All media drivers should now be using VB2 kAPI - new automotive driver: mgb4 - new platform video driver: npcm-video - new sensor driver: mt9m114 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge TI-specific parts - ir-rx51 was removed and the N900 DT binding was moved to the pwm-ir-tx generic driver - drop atomisp-specific ov5693, using the upstream driver instead - the camss driver has gained RDI3 support for VFE 17x - the atomisp driver now detects ISP2400 or ISP2401 at run time. No need to set it up at build time anymore - lots of driver fixes, cleanups and improvements * tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM media: venus: Fix firmware path for resources media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by media: venus: hfi_parser: Add check to keep the number of codecs within range media: venus: hfi: add checks to handle capabilities from firmware media: venus: hfi: fix the check to handle session buffer requirement media: venus: hfi: add checks to perform sanity on queue pointers media: platform: cadence: select MIPI_DPHY dependency media: MAINTAINERS: Fix path for J721E CSI2RX bindings media: cec: meson: always include meson sub-directory in Makefile media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr() media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config() media: mediatek: vcodec: using encoder device to alloc/free encoder memory media: imx-jpeg: notify source chagne event when the first picture parsed media: cx231xx: Use EP5_BUF_SIZE macro media: siano: Drop unnecessary error check for debugfs_create_dir/file() media: mediatek: vcodec: Handle invalid encoder vsi media: aspeed: Drop unnecessary error check for debugfs_create_file() Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED Documentation: media: gen-errors.rst: fix confusing ENOTTY description ...
2023-11-06riscv: kernel: Use correct SYM_DATA_*() macro for dataClément Léger
Some data were incorrectly annotated with SYM_FUNC_*() instead of SYM_DATA_*() ones. Use the correct ones. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-4-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Use SYM_*() assembly macros instead of deprecated onesClément Léger
ENTRY()/END()/WEAK() macros are deprecated and we should make use of the new SYM_*() macros [1] for better annotation of symbols. Replace the deprecated ones with the new ones and fix wrong usage of END()/ENDPROC() to correctly describe the symbols. [1] https://docs.kernel.org/core-api/asm-annotations.html Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: use ".L" local labels in assembly when applicableClément Léger
For the sake of coherency, use local labels in assembly when applicable. This also avoid kprobes being confused when applying a kprobe since the size of function is computed by checking where the next visible symbol is located. This might end up in computing some function size to be way shorter than expected and thus failing to apply kprobes to the specified offset. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-2-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: boot: Fix creation of loader.binGeert Uytterhoeven
When flashing loader.bin for K210 using kflash:     [ERROR] This is an ELF file and cannot be programmed to flash directly: arch/riscv/boot/loader.bin Before, loader.bin relied on "OBJCOPYFLAGS := -O binary" in the main RISC-V Makefile to create a boot image with the right format. With this removed, the image is now created in the wrong (ELF) format. Fix this by adding an explicit rule. Fixes: 505b02957e74f0c5 ("riscv: Remove duplicate objcopy flag") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/1086025809583809538dfecaa899892218f44e7e.1698159066.git.geert+renesas@glider.be Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06Merge patch series "riscv: tlb flush improvements"Palmer Dabbelt
Alexandre Ghiti <alexghiti@rivosinc.com> says: This series optimizes the tlb flushes on riscv which used to simply flush the whole tlb whatever the size of the range to flush or the size of the stride. Patch 3 introduces a threshold that is microarchitecture specific and will very likely be modified by vendors, not sure though which mechanism we'll use to do that (dt? alternatives? vendor initialization code?). * b4-shazam-merge: riscv: Improve flush_tlb_kernel_range() riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb riscv: Improve flush_tlb_range() for hugetlb pages riscv: Improve tlb_flush() Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Improve flush_tlb_kernel_range()Alexandre Ghiti
This function used to simply flush the whole tlb of all harts, be more subtile and try to only flush the range. The problem is that we can only use PAGE_SIZE as stride since we don't know the size of the underlying mapping and then this function will be improved only if the size of the region to flush is < threshold * PAGE_SIZE. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlbAlexandre Ghiti
Currently, when the range to flush covers more than one page (a 4K page or a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole tlb comes with a greater cost than flushing a single entry so we should flush single entries up to a certain threshold so that: threshold * cost of flushing a single entry < cost of flushing the whole tlb. Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Improve flush_tlb_range() for hugetlb pagesAlexandre Ghiti
flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form, when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the whole tlb: so set a stride of the size of the hugetlb mapping in order to only flush the hugetlb mapping. However, if the hugepage is a NAPOT region, all PTEs that constitute this mapping must be invalidated, so the stride size must actually be the size of the PTE. Note that THPs are directly handled by flush_pmd_tlb_range(). Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Improve tlb_flush()Alexandre Ghiti
For now, tlb_flush() simply calls flush_tlb_mm() which results in a flush of the whole TLB. So let's use mmu_gather fields to provide a more fine-grained flush of the TLB. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06powerpc/fb: Call internal __phys_mem_access_prot() in fbdev codeThomas Zimmermann
Call __phys_mem_access_prot() from the fbdev mmap helper pgprot_framebuffer(). Allows to avoid the file argument of NULL. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-6-tzimmermann@suse.de
2023-11-06powerpc: Remove file parameter from phys_mem_access_prot()Thomas Zimmermann
Remove 'file' parameter from struct machdep_calls.phys_mem_access_prot and its implementation in pci_phys_mem_access_prot(). The file is not used on PowerPC. By removing it, a later patch can simplify fbdev's mmap code, which uses phys_mem_access_prot() on PowerPC. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> [mpe: Rebase on unrelated changes to phys_mem_access_prot()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-5-tzimmermann@suse.de
2023-11-06powerpc/machdep: Remove trailing whitespacesThomas Zimmermann
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-4-tzimmermann@suse.de
2023-11-05riscv: mm: update T-Head memory type definitionsJisheng Zhang
Update T-Head memory type definitions according to C910 doc [1] For NC and IO, SH property isn't configurable, hardcoded as SH, so set SH for NOCACHE and IO. And also set bit[61](Bufferable) for NOCACHE according to the table 6.1 in the doc [1]. Link: https://github.com/T-head-Semi/openc910 [1] Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20230912072510.2510-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05Merge patch series "riscv: vdso.lds.S: some improvement"Palmer Dabbelt
Jisheng Zhang <jszhang@kernel.org> says: This series renews one of my last year RFC patch[1], tries to improve the vdso layout a bit. patch1 removes useless symbols patch2 merges .data section of vdso into .rodata because they are readonly patch3 is the real renew patch, it removes hardcoded 0x800 .text start addr. But I rewrite the commit msg per Andrew's suggestions and move move .note, .eh_frame_hdr, and .eh_frame between .rodata and .text to keep the actual code well away from the non-instruction data. * b4-shazam-merge: riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr riscv: vdso.lds.S: merge .data section into .rodata section riscv: vdso.lds.S: drop __alt_start and __alt_end symbols Link: https://lore.kernel.org/linux-riscv/20221123161805.1579-1-jszhang@kernel.org/ [1] Link: https://lore.kernel.org/r/20230912072015.2424-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: remove hardcoded 0x800 .text start addrJisheng Zhang
I believe the hardcoded 0x800 and related comments come from the long history VDSO_TEXT_OFFSET in x86 vdso code, but commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds") and commit f6b46ebf904f ("x86 vDSO: new layout") removes the comment and hard coding for x86. Similar as x86 and other arch, riscv doesn't need the rigid layout using VDSO_TEXT_OFFSET since it "no longer matters to the kernel". so we could remove the hard coding now, and removing it brings a small vdso.so and aligns with other architectures. Also, having enough separation between data and text is important for I-cache, so similar as x86, move .note, .eh_frame_hdr, and .eh_frame between .rodata and .text. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-4-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: merge .data section into .rodata sectionJisheng Zhang
The .data section doesn't need to be separate from .rodata section, they are both readonly. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-3-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: drop __alt_start and __alt_end symbolsJisheng Zhang
These two symbols are not used, remove them. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: add userland instruction dump to RISC-V splatsYunhui Cui
Add userland instruction dump and rename dump_kernel_instr() to dump_instr(). An example: [ 0.822439] Freeing unused kernel image (initmem) memory: 6916K [ 0.823817] Run /init as init process [ 0.839411] init[1]: unhandled signal 4 code 0x1 at 0x000000000005be18 in bb[10000+5fb000] [ 0.840751] CPU: 0 PID: 1 Comm: init Not tainted 5.14.0-rc4-00049-gbd644290aa72-dirty #187 [ 0.841373] Hardware name: , BIOS [ 0.841743] epc : 000000000005be18 ra : 0000000000079e74 sp : 0000003fffcafda0 [ 0.842271] gp : ffffffff816e9dc8 tp : 0000000000000000 t0 : 0000000000000000 [ 0.842947] t1 : 0000003fffc9fdf0 t2 : 0000000000000000 s0 : 0000000000000000 [ 0.843434] s1 : 0000000000000000 a0 : 0000003fffca0190 a1 : 0000003fffcafe18 [ 0.843891] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.844357] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.844803] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.845253] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.845722] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 0.846180] s11: 0000000000d144e0 t3 : 0000000000000000 t4 : 0000000000000000 [ 0.846616] t5 : 0000000000000000 t6 : 0000000000000000 [ 0.847204] status: 0000000200000020 badaddr: 00000000f0028053 cause: 0000000000000002 [ 0.848219] Code: f06f ff5f 3823 fa11 0113 fb01 2e23 0201 0293 0000 (8053) f002 [ 0.851016] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230912021349.28302-1-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: kprobes: allow writing to x0Nam Cao
Instructions can write to x0, so we should simulate these instructions normally. Currently, the kernel hangs if an instruction who writes to x0 is simulated. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: provide riscv-specific is_trap_insn()Nam Cao
uprobes expects is_trap_insn() to return true for any trap instructions, not just the one used for installing uprobe. The current default implementation only returns true for 16-bit c.ebreak if C extension is enabled. This can confuse uprobes if a 32-bit ebreak generates a trap exception from userspace: uprobes asks is_trap_insn() who says there is no trap, so uprobes assume a probe was there before but has been removed, and return to the trap instruction. This causes an infinite loop of entering and exiting trap handler. Instead of using the default implementation, implement this function speficially for riscv with checks for both ebreak and c.ebreak. Fixes: 74784081aac8 ("riscv: Add uprobes supported") Signed-off-by: Nam Cao <namcaov@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05s390/mm: make pte_free_tlb() similar to pXd_free_tlb()Alexander Gordeev
Make pte_free_tlb() look similar to pXd_free_tlb() family functions. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/mm: use compound page order to distinguish page tablesAlexander Gordeev
CRSTs always have size of four pages, while 2KB-size page tables always occupy a single page. Use that information to distinguish page tables from CRSTs. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/mm: use full 4KB page for 2KB PTEAlexander Gordeev
Cease using 4KB pages to host two 2KB PTEs. That greatly simplifies the memory management code at the expense of page tables memory footprint. Instead of two PTEs per 4KB page use only upper half of the parent page for a single PTE. With that the list of half-used pages pgtable_list becomes unneeded. Further, the upper byte of the parent page _refcount counter does not need to be used for fragments tracking and could be left alone. Commit 8211dad62798 ("s390: add pte_free_defer() for pgtables sharing page") introduced the use of PageActive flag to coordinate a deferred free with 2KB page table fragments tracking. Since there is no tracking anymore, there is no need for using PageActive flag. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/cmma: rework no-dat handlingHeiko Carstens
Rework the way physical pages are set no-dat / dat: The old way is: - Rely on that all pages are initially marked "dat" - Allocate page tables for the kernel mapping - Enable dat - Walk the whole kernel mapping and set PG_arch_1 bit in all struct pages that belong to pages of kernel page tables - Walk all struct pages and test and clear the PG_arch_1 bit. If the bit is not set, set the page state to no-dat - For all subsequent page table allocations, set the page state to dat (remove the no-dat state) on allocation time Change this rather complex logic to a simpler approach: - Set the whole physical memory (all pages) to "no-dat" - Explicitly set those page table pages to "dat" which are part of the kernel image (e.g. swapper_pg_dir) - For all subsequent page table allocations, set the page state to dat (remove the no-dat state) on allocation time In result the code is simpler, and this also allows to get rid of one odd usage of the PG_arch_1 bit. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/cmma: move arch_set_page_dat() to header fileHeiko Carstens
In order to be usable for early boot code move the simple arch_set_page_dat() function to header file, and add its counter-part arch_set_page_nodat(). Also change the parameters, and the function name slightly. This is required since there aren't any struct pages available in early boot code, and renaming of functions is done to make sure that all users are converted to the new API. Instead of a pointer to a struct page a virtual address is passed, and instead of an order the number of pages for which the page state needs be set. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/cmma: move set_page_stable() and friends to header fileHeiko Carstens
In order to be usable for early boot code move the simple set_page_xxx() function to header file. Also change the parameters, and the function names slightly. This is required since there aren't any struct pages available in early boot code, and renaming of functions is done to make sure that all users are converted to the new API. Instead of a pointer to a struct page a virtual address is passed, and instead of an order the number of pages for which the page state needs be set. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/cmma: move parsing of cmma kernel parameter to early boot codeHeiko Carstens
The "cmma=" kernel command line parameter needs to be parsed early for upcoming changes. Therefore move the parsing code. Note that EX_TABLE handling of cmma_test_essa() needs to be open-coded, since the early boot code doesn't have infrastructure for handling expected exceptions. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/cmma: cleanup inline assembliesHeiko Carstens
Cleanup cmma related inline assemblies: - consolidate inline assemblies - use symbolic names - add same white space where missing - add braces to for-loops which contain a multi-line statement Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390: add USER_STACKTRACE supportHeiko Carstens
Use the perf_callchain_user() code as blueprint to also add support for USER_STACKTRACE. To describe how to use this cite the commit message of the LoongArch implementation which came with commit 4d7bf939df08 ("LoongArch: Add USER_STACKTRACE support"), but replace -fno-omit-frame-pointer option with the s390 specific -mbackchain option: ====================================================================== To get the best stacktrace output, you can compile your userspace programs with frame pointers (at least glibc + the app you are tracing). 1, export "CC = gcc -mbackchain"; 2, compile your programs with "CC"; 3, use uprobe to get stacktrace output. ... echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r2:u64' > uprobe_events echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r2:u64' >> uprobe_events echo 'comm == "demo"' > ./events/uprobes/malloc/filter echo 'comm == "demo"' > ./events/uprobes/free/filter echo 1 > ./options/userstacktrace echo 1 > ./options/sym-userobj ... ====================================================================== Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/perf: implement perf_callchain_user()Heiko Carstens
Daan De Meyer and Neal Gompa reported that s390 does not support perf user stack unwinding. This was never implemented since this requires user space to be compiled with the -mbackchain compile option, which until now no distribution did. However this is going to change with Fedora. Therefore provide a perf_callchain_user() implementation. Note that due to the way s390 sets up stack frames the provided call chains can contain invalid values. This is especially true for the first stack frame, where it is not possible to tell if the return address has been written to the stack already or not. Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Reported-by: Neal Gompa <ngompa@fedoraproject.org> Closes: https://lore.kernel.org/all/CAO8sHcn3+_qrnvp0580aK7jN0Wion5F7KYeBAa4MnCY4mqABPA@mail.gmail.com/ Link: https://lore.kernel.org/all/20231030123558.10816-A-hca@linux.ibm.com Reviewed-by: Neal Gompa <ngompa@fedoraproject.org> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05s390/mm: add missing conversion to use ptdescsAlexander Gordeev
Commit 6326c26c1514 ("s390: convert various pgalloc functions to use ptdescs") missed to convert tlb_remove_table() into tlb_remove_ptdesc() in few locations. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-11-05Merge patch series "Improve PTDUMP and introduce new fields"Palmer Dabbelt
Yu Chien Peter Lin <peterlin@andestech.com> says: This patchset enhances PTDUMP by providing additional information from pagetable entries. The first patch fixes the RSW field, while the second and third patches introduce the PBMT and NAPOT fields, respectively, for RV64 systems. * b4-shazam-merge: riscv: Introduce NAPOT field to PTDUMP riscv: Introduce PBMT field to PTDUMP riscv: Improve PTDUMP to show RSW with non-zero value Link: https://lore.kernel.org/r/20230921025022.3989723-1-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Introduce NAPOT field to PTDUMPYu Chien Peter Lin
This patch introduces the NAPOT field to PTDUMP, allowing it to display the letter "N" for pages that have the 63rd bit set. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-4-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Introduce PBMT field to PTDUMPYu Chien Peter Lin
This patch introduces the PBMT field to the PTDUMP, so it can display the memory attributes for NC or IO. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-3-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Improve PTDUMP to show RSW with non-zero valueYu Chien Peter Lin
RSW field can be used to encode 2 bits of software defined information. Currently, PTDUMP only prints "RSW" when its value is 1 or 3. To fix this issue and improve the debugging experience with PTDUMP, we redefine _PAGE_SPECIAL to its original value and use _PAGE_SOFT as the RSW mask, allow it to print the RSW with any non-zero value. This patch also removes the val from the struct prot_bits as it is no longer needed. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-2-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05RISC-V: capitalise CMO op macrosConor Dooley
The CMO op macros initially used lower case, as the original iteration of the ALT_CMO_OP alternative stringified the first parameter to finalise the assembly for the standard variant. As a knock-on, the T-Head versions of these CMOs had to use mixed case defines. Commit dd23e9535889 ("RISC-V: replace cbom instructions with an insn-def") removed the asm construction with stringify, replacing it an insn-def macro, rending the lower-case surplus to requirements. As far as I can tell from a brief check, CBO_zero does not see similar use and didn't require the mixed case define in the first place. Replace the lower case characters now for consistency with other insn-def macros in the standard and T-Head forms, and adjust the callsites. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230915-aloe-dollar-994937477776@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: don't probe unaligned access speed if already doneJisheng Zhang
If misaligned_access_speed percpu var isn't so called "HWPROBE MISALIGNED UNKNOWN", it means the probe has happened(this is possible for example, hotplug off then hotplug on one cpu), and the percpu var has been set, don't probe again in this case. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: defconfig : add CONFIG_MMC_DW for starfiveJinyu Tang
If these config not set, mmc can't run for jh7110, rootfs can't be found when using SD card. So set CONFIG_MMC_DW=y like arm64 defconfig, and set CONFIG_MMC_DW_STARFIVE=y for starfive. Then starfive vf2 board can start SD card rootfs with mainline defconfig and dtb. Signed-off-by: Jinyu Tang <tangjinyu@tinylab.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230912133128.5247-1-tangjinyu@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: signal: handle syscall restart before get_signalHaorong Lu
In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by: Haorong Lu <ancientmodern4@gmail.com> Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05Merge patch series "Add support to handle misaligned accesses in S-mode"Palmer Dabbelt
Clément Léger <cleger@rivosinc.com> says: Since commit 61cadb9 ("Provide new description of misaligned load/store behavior compatible with privileged architecture.") in the RISC-V ISA manual, it is stated that misaligned load/store might not be supported. However, the RISC-V kernel uABI describes that misaligned accesses are supported. In order to support that, this series adds support for S-mode handling of misaligned accesses as well support for prctl(PR_UNALIGN). Handling misaligned access in kernel allows for a finer grain control of the misaligned accesses behavior, and thanks to the prctl() call, can allow disabling misaligned access emulation to generate SIGBUS. User space can then optimize its software by removing such access based on SIGBUS generation. This series is useful when using a SBI implementation that does not handle misaligned traps as well as detecting misaligned accesses generated by userspace application using the prctrl(PR_SET_UNALIGN) feature. This series can be tested using the spike simulator[1] and a modified openSBI version[2] which allows to always delegate misaligned load/store to S-mode. A test[3] that exercise various instructions/registers can be executed to verify the unaligned access support. [1] https://github.com/riscv-software-src/riscv-isa-sim [2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned [3] https://github.com/clementleger/unaligned_test * b4-shazam-merge: riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN riscv: report misaligned accesses emulation to hwprobe riscv: annotate check_unaligned_access_boot_cpu() with __init riscv: add support for sysctl unaligned_enabled control riscv: add floating point insn support to misaligned access emulation riscv: report perf event for misaligned fault riscv: add support for misaligned trap handling in S-mode riscv: remove unused functions in traps_misaligned.c Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-04Merge tag 'tsm-for-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux Pull unified attestation reporting from Dan Williams: "In an ideal world there would be a cross-vendor standard attestation report format for confidential guests along with a common device definition to act as the transport. In the real world the situation ended up with multiple platform vendors inventing their own attestation report formats with the SEV-SNP implementation being a first mover to define a custom sev-guest character device and corresponding ioctl(). Later, this configfs-tsm proposal intercepted an attempt to add a tdx-guest character device and a corresponding new ioctl(). It also anticipated ARM and RISC-V showing up with more chardevs and more ioctls(). The proposal takes for granted that Linux tolerates the vendor report format differentiation until a standard arrives. From talking with folks involved, it sounds like that standardization work is unlikely to resolve anytime soon. It also takes the position that kernfs ABIs are easier to maintain than ioctl(). The result is a shared configfs mechanism to return per-vendor report-blobs with the option to later support a standard when that arrives. Part of the goal here also is to get the community into the "uncomfortable, but beneficial to the long term maintainability of the kernel" state of talking to each other about their differentiation and opportunities to collaborate. Think of this like the device-driver equivalent of the common memory-management infrastructure for confidential-computing being built up in KVM. As for establishing an "upstream path for cross-vendor confidential-computing device driver infrastructure" this is something I want to discuss at Plumbers. At present, the multiple vendor proposals for assigning devices to confidential computing VMs likely needs a new dedicated repository and maintainer team, but that is a discussion for v6.8. For now, Greg and Thomas have acked this approach and this is passing is AMD, Intel, and Google tests. Summary: - Introduce configfs-tsm as a shared ABI for confidential computing attestation reports - Convert sev-guest to additionally support configfs-tsm alongside its vendor specific ioctl() - Added signed attestation report retrieval to the tdx-guest driver forgoing a new vendor specific ioctl() - Misc cleanups and a new __free() annotation for kvfree()" * tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux: virt: tdx-guest: Add Quote generation support using TSM_REPORTS virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT mm/slab: Add __free() support for kvfree virt: sevguest: Prep for kernel internal get_ext_report() configfs-tsm: Introduce a shared ABI for attestation reports virt: coco: Add a coco/Makefile and coco/Kconfig virt: sevguest: Fix passing a stack buffer as a scatterlist target
2023-11-04Merge tag 'x86_microcode_for_v6.7_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Borislac Petkov: "Major microcode loader restructuring, cleanup and improvements by Thomas Gleixner: - Restructure the code needed for it and add a temporary initrd mapping on 32-bit so that the loader can access the microcode blobs. This in itself is a preparation for the next major improvement: - Do not load microcode on 32-bit before paging has been enabled. Handling this has caused an endless stream of headaches, issues, ugly code and unnecessary hacks in the past. And there really wasn't any sensible reason to do that in the first place. So switch the 32-bit loading to happen after paging has been enabled and turn the loader code "real purrty" again - Drop mixed microcode steppings loading on Intel - there, a single patch loaded on the whole system is sufficient - Rework late loading to track which CPUs have updated microcode successfully and which haven't, act accordingly - Move late microcode loading on Intel in NMI context in order to guarantee concurrent loading on all threads - Make the late loading CPU-hotplug-safe and have the offlined threads be woken up for the purpose of the update - Add support for a minimum revision which determines whether late microcode loading is safe on a machine and the microcode does not change software visible features which the machine cannot use anyway since feature detection has happened already. Roughly, the minimum revision is the smallest revision number which must be loaded currently on the system so that late updates can be allowed - Other nice leanups, fixess, etc all over the place" * tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) x86/microcode/intel: Add a minimum required revision for late loading x86/microcode: Prepare for minimal revision check x86/microcode: Handle "offline" CPUs correctly x86/apic: Provide apic_force_nmi_on_cpu() x86/microcode: Protect against instrumentation x86/microcode: Rendezvous and load in NMI x86/microcode: Replace the all-in-one rendevous handler x86/microcode: Provide new control functions x86/microcode: Add per CPU control field x86/microcode: Add per CPU result state x86/microcode: Sanitize __wait_for_cpus() x86/microcode: Clarify the late load logic x86/microcode: Handle "nosmt" correctly x86/microcode: Clean up mc_cpu_down_prep() x86/microcode: Get rid of the schedule work indirection x86/microcode: Mop up early loading leftovers x86/microcode/amd: Use cached microcode for AP load x86/microcode/amd: Cache builtin/initrd microcode early x86/microcode/amd: Cache builtin microcode too x86/microcode/amd: Use correct per CPU ucode_cpu_info ...
2023-11-04Merge tag 'kbuild-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Implement the binary search in modpost for faster symbol lookup - Respect HOSTCC when linking host programs written in Rust - Change the binrpm-pkg target to generate kernel-devel RPM package - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE - Unify vdso_install rules - Remove unused __memexit* annotations - Eliminate stale whitelisting for __devinit/__devexit from modpost - Enable dummy-tools to handle the -fpatchable-function-entry flag - Add 'userldlibs' syntax * tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: support 'userldlibs' syntax kbuild: dummy-tools: pretend we understand -fpatchable-function-entry kbuild: Correct missing architecture-specific hyphens modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS modpost: merge sectioncheck table entries regarding init/exit sections modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS modpost: disallow the combination of EXPORT_SYMBOL and __meminit* modpost: remove EXIT_SECTIONS macro modpost: remove MEM_INIT_SECTIONS macro modpost: remove more symbol patterns from the section check whitelist modpost: disallow *driver to reference .meminit* sections linux/init: remove __memexit* annotations modpost: remove ALL_EXIT_DATA_SECTIONS macro kbuild: simplify cmd_ld_multi_m kbuild: avoid too many execution of scripts/pahole-flags.sh kbuild: remove ARCH_POSTLINK from module builds kbuild: unify no-compiler-targets and no-sync-config-targets kbuild: unify vdso_install rules docs: kbuild: add INSTALL_DTBS_PATH UML: remove unused cmd_vdso_install ...
2023-11-03Merge tag 'pinctrl-v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No pin control core changes this time. New drivers: - Realtek RTD family pin control driver and RTD1619B, RTD1319D and RTD1315E subdrivers - Nuvoton NPCM8xx combined pin control and GPIO driver - Amlogic T7 pin control driver - Renesas RZ/G3S pin control driver Improvements: - A number of additional UART groups added to the Mediatek MT7981 driver - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660 - Extra GPIO banks for the Sunxi H616 - MLSP I2C6 function support in Qualcomm MSM8226 - Some __counted_by() annotations for dynamic arrays - Ongoing work to make remove() return void - LSBC groups and functions in the Renesas R8A7778" * tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits) pinctrl: Use device_get_match_data() dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes dt-bindings: pinctrl: brcm: Ensure all child node properties are documented pinctrl: renesas: rzn1: Convert to platform remove callback returning void pinctrl: renesas: rzg2l: Add RZ/G3S support dt-bindings: pinctrl: renesas: Document RZ/G3S SoC pinctrl: renesas: rzg2l: Add support for different DS values on different groups pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets pinctrl: renesas: rzg2l: Index all registers based on port offset pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request() pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions pinctrl: intel: fetch community only when we need it pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case pinctrl: cherryview: Convert to platform remove callback returning void pinctrl: sprd-sc9860: Convert to platform remove callback returning void pinctrl: qcom/msm: Convert to platform remove callback returning void pinctrl: qcom/lpi: Convert to platform remove callback returning void ...
2023-11-03Merge tag 'usb-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-11-03Merge tag 'staging-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 6.7-rc1. A bit bigger than 6.6 this time around, as it coincided with the Outreachy and mentorship application process, so we got a bunch of new developers sending in their first changes, which is nice to see. Also in here is a removal of the qlge ethernet driver, and the rtl8192u wireless driver. Both of these were very old and no one was maintaining them, the wireless driver removal was due to no one using it anymore, and no hardware to be found, and is part of a larger effort to remove unused and old wifi drivers from the system. The qlge ethernet driver did have one user pop up after it was dropped, and we are working with the network mainainers to figure out what tree it will come back in from and who will be responsible for it, and if it really is being used or not. Odds are it will show up in a network subsystem pull request after -rc1 is out, but we aren't sure yet. Other smaller changes in here are: - Lots of vc04_services work by Umang to clean up the mess created by the rpi developers long ago, bringing it almost into good enough shape to get out of staging, hopefully next major release, it's getting close. - rtl8192e variable cleanups and removal of unused code and structures - vme_user coding style cleanups - other small coding style cleanups to lots of the staging drivers - octeon typedef removals, and then last-minute revert when it was found to break the build in some configurations (it's a hard driver to build properly, none of the normal automated testing catches it.) All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits) Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t" Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t" Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t" Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t" Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t" Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t" staging: vt6655: Type encoding info dropped from variable name "byRxRate" staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF" staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF" staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType" staging: vt6655: Type encoding info dropped from variable name "byPacketType" staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter" staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime" staging: vt6655: Type encoding info dropped from variable name "pbyTxRate" staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter" staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff" staging: fbtft: Convert to platform remove callback returning void staging: olpc_dcon: Remove I2C_CLASS_DDC support staging: vc04_services: use snprintf instead of sprintf staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx] ...
2023-11-03Merge tag 'char-misc-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ...
2023-11-03Merge tag 's390-6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Get rid of private VM_FAULT flags - Add word-at-a-time implementation - Add DCACHE_WORD_ACCESS support - Cleanup control register handling - Disallow CPU hotplug of CPU 0 to simplify its handling complexity, following a similar restriction in x86 - Optimize pai crypto map allocation - Update the list of crypto express EP11 coprocessor operation modes - Fixes and improvements for secure guests AP pass-through - Several fixes to address incorrect page marking for address translation with the "cmma no-dat" feature, preventing potential incorrect guest TLB flushes - Fix early IPI handling - Several virtual vs physical address confusion fixes - Various small fixes and improvements all over the code * tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits) s390/cio: replace deprecated strncpy with strscpy s390/sclp: replace deprecated strncpy with strtomem s390/cio: fix virtual vs physical address confusion s390/cio: export CMG value as decimal s390: delete the unused store_prefix() function s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir s390/cmma: fix detection of DAT pages s390/sclp: handle default case in sclp memory notifier s390/pai_crypto: remove per-cpu variable assignement in event initialization s390/pai: initialize event count once at initialization s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection s390/mm: add missing arch_set_page_dat() call to gmap allocations s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc() s390/cmma: fix initial kernel address space page table walk s390/diag: add missing virt_to_phys() translation to diag224() s390/mm,fault: move VM_FAULT_ERROR handling to do_exception() s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS s390/mm,fault: remove VM_FAULT_SIGNAL s390/mm,fault: remove VM_FAULT_BADCONTEXT s390/mm,fault: simplify kfence fault handling ...
generated by cgit (git 2.34.1) at 2025-04-25 06:52:24 +0000