| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I think the main one is fixing the dynamic SCS patching when full LTO
is enabled (clang was silently getting this horribly wrong), but it's
all good stuff.
Rob just pointed out that the fix to the workaround for erratum
#2966298 might not be necessary, but in the worst case it's harmless
and since the official description leaves a little to be desired here,
I've left it in.
Summary:
- Fix shadow call stack patching with LTO=full
- Fix voluntary preemption of the FPSIMD registers from assembly code
- Fix workaround for A520 CPU erratum #2966298 and extend to A510
- Fix SME issues that resulted in corruption of the register state
- Minor fixes (missing includes, formatting)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix silcon-errata.rst formatting
arm64/sme: Always exit sme_alloc() early with existing storage
arm64/fpsimd: Remove spurious check for SVE support
arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
arm64: entry: simplify kernel_exit logic
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
arm64: errata: Add Cortex-A510 speculative unprivileged load workaround
arm64: Rename ARM64_WORKAROUND_2966298
arm64: fpsimd: Bring cond_yield asm macro in line with new rules
arm64: scs: Work around full LTO issue with dynamic SCS
arm64: irq: include <linux/cpumask.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Raise minimum clang version to 18.0.0
- Enable initial Rust support for LoongArch
- Add built-in dtb support for LoongArch
- Use generic interface to support crashkernel=X,[high,low]
- Some bug fixes and other small changes
- Update the default config file.
* tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
MAINTAINERS: Add BPF JIT for LOONGARCH entry
LoongArch: Update Loongson-3 default config file
LoongArch: BPF: Prevent out-of-bounds memory access
LoongArch: BPF: Support 64-bit pointers to kfuncs
LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()
LoongArch: Use generic interface to support crashkernel=X,[high,low]
LoongArch: Fix and simplify fcsr initialization on execve()
LoongArch: Let cores_io_master cover the largest NR_CPUS
LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
LoongArch: Add a missing call to efi_esrt_init()
LoongArch: Parsing CPU-related information from DTS
LoongArch: dts: DeviceTree for Loongson-2K2000
LoongArch: dts: DeviceTree for Loongson-2K1000
LoongArch: dts: DeviceTree for Loongson-2K0500
LoongArch: Allow device trees be built into the kernel
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
dt-bindings: loongarch: Add Loongson SoC boards compatibles
dt-bindings: loongarch: Add CPU bindings for LoongArch
LoongArch: Enable initial Rust support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree header detangling from Rob Herring:
"Remove the circular including of of_device.h and of_platform.h along
with all of their implicit includes.
This is the culmination of several kernel cycles worth of fixing
implicit DT includes throughout the tree"
* tag 'devicetree-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Stop circularly including of_device.h and of_platform.h
clk: qcom: gcc-x1e80100: Replace of_device.h with explicit includes
thermal: loongson2: Replace of_device.h with explicit includes
net: can: Use device_get_match_data()
sparc: Use device_get_match_data()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
* tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits)
kbuild: deb-pkg: use debian/<package> for tmpdir
kbuild: deb-pkg: move 'make headers' to build-arch
kbuild: deb-pkg: do not search for 'scripts' directory under arch/
kbuild: deb-pkg: use build ID instead of debug link for dbg package
kbuild: deb-pkg: use more debhelper commands in builddeb
kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules
kbuild: deb-pkg: allow to run debian/rules from output directory
kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed
kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules
kbuild: deb-pkg: factor out common Make options in debian/rules
kbuild: deb-pkg: hard-code Build-Depends
kbuild: deb-pkg: split debian/copyright from the mkdebian script
gen_init_cpio: Apply mtime supplied by user to all file types
kbuild: resolve symlinks for O= properly
docs: dev-tools: Add UAPI checker documentation
check-uapi: Introduce check-uapi.sh
scripts: Introduce a default git.orderFile
kconfig: WERROR unmet symbol dependency
Add .editorconfig file for basic formatting
kconfig: Use KCONFIG_CONFIG instead of .config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are three new drivers this cycle. Also the cmos driver is
getting fixes for longstanding wakeup issues on AMD.
New drivers:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support"
* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
rtc: da9063: Use dev_err_probe()
rtc: da9063: Use device_get_match_data()
rtc: da9063: Make IRQ as optional
rtc: max31335: Fix comparison in max31335_volatile_reg()
rtc: max31335: use regmap_update_bits_check
rtc: max31335: remove unecessary locking
rtc: max31335: add driver support
dt-bindings: rtc: max31335: add max31335 bindings
rtc: rv8803: add wakeup-source support
rtc: ac100: remove misuses of kernel-doc
rtc: class: Remove usage of the deprecated ida_simple_xx() API
rtc: MAINTAINERS: drop Alessandro Zummo
rtc: ma35d1: remove hardcoded UIE support
dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
rtc: rv8803: Add power management support
rtc: ds3232: avoid unused-const-variable warning
rtc: lpc24xx: add missing dependency
rtc: tps6594: Add driver for TPS6594 RTC
rtc: Add driver for Nuvoton ma35d1 rtc controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"Enable percpu page allocator for RISC-V.
There are RISC-V configurations with sparse NUMA configurations and
small vmalloc space causing dynamic percpu allocations to fail as the
backing chunk stride is too far apart"
* tag 'percpu-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
riscv: Enable pcpu page first chunk allocator
mm: Introduce flush_cache_vmap_early()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where normal PCI
stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code (which
perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
* tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: do not reset queue removed from host config
s390/vfio-ap: reset queues associated with adapter for queue unbound from driver
s390/vfio-ap: reset queues filtered from the guest's AP config
s390/vfio-ap: let on_scan_complete() callback filter matrix and update guest's APCB
s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration
s390/vfio-ap: always filter entire AP matrix
s390/net: add Thorsten Winkler as maintainer
s390/pai_ext: split function paiext_push_sample
s390/pai_ext: rework function paiext_copy argments
s390/pai: rework paiXXX_start and paiXXX_stop functions
s390/pai_crypto: split function paicrypt_push_sample
s390/pai: rework paixxxx_getctr interface
s390/ptrace: remove leftover comment
s390/fpu: remove __load_fpu_regs() export
s390/mm,fault: remove not needed tsk variable
s390/pci: fix max size calculation in zpci_memcpy_toio()
s390/kexec: do not automatically select KEXEC option
s390/compat: change default for CONFIG_COMPAT to "n"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
|
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is no need to check for SVE support when changing vector lengths,
even if the system is SME only we still need SVE storage for the streaming
SVE state.
Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sve-enabled-check-v1-1-a26360b00f6d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When writing ZA we currently unconditionally flush the buffer used to store
it as part of ensuring that it is allocated. Since this buffer is shared
with ZT0 this means that a write to ZA when PSTATE.ZA is already set will
corrupt the value of ZT0 on a SME2 system. Fix this by only flushing the
backing storage if PSTATE.ZA was not previously set.
This will mean that short or failed writes may leave stale data in the
buffer, this seems as correct as our current behaviour and unlikely to be
something that userspace will rely on.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-fix-ptrace-za-zt-v1-1-48617517028a@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For historical reasons, the non-KPTI exception return path is duplicated for
EL1 and EL0, with the structure:
.if \el == 0
[ KPTI handling ]
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL0 exception return workaround ]
eret
.else
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL1 exception return workaround ]
eret
.endif
sb
This would be simpler and clearer with the common portions factored out,
e.g.
.if \el == 0
[ KPTI handling ]
.endif
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
.if \el == 0
[ EL0 exception return workaround ]
.else
[ EL1 exception return workaround ]
.endif
eret
sb
This expands to the same code, but is simpler for a human to follow as
it avoids duplicates the restore of LR+SP, and makes it clear that the
ERET is associated with the SB.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240116110221.420467-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".
Fixes: 471470bc7052 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Two small fixes for the parisc architecture:
- Fix PDC address calculation with narrow firmware (64-bit kernel on
32-bit firmware)
- Fix kthread which checks power button get started on qemu too"
* tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/power: Fix power soft-off button emulation on qemu
parisc/firmware: Fix F-extend for PDC addresses
|
|
Pull Xtensa updates from Max Filippov:
- small cleanups in the xtensa PCI and asmmacro code
- fix kernel build with FDPIC toolchain
* tag 'xtensa-20240117' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: don't produce FDPIC output with fdpic toolchain
xtensa: Use PCI_HEADER_TYPE_MFD instead of literal
xtensa: replace <asm-generic/export.h> with <linux/export.h>
xtensa: fix variants path in the Kconfig help
|
|
Pull ARM updates from Russell King:
- add missing neon instructions for the neon support hook
- arrange for davinci to select PINCTRL
- try VMA lock-base page fault handling first
- use memblock_alloc_try_nid_raw() for kasan shadow page
- dma: use kvzalloc() rather than kzalloc()/vzalloc()
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9331/1: ARM/dma-mapping: replace kzalloc() and vzalloc() with kvzalloc()
ARM: 9329/1: kasan: Use memblock_alloc_try_nid_raw for shadow page
ARM: 9328/1: mm: try VMA lock-based page fault handling first
ARM: 9330/1: davinci: also select PINCTRL
ARM: 9327/1: vfp: Add missing VFP instructions to neon_support_hook
|
|
Pull microblaze updates from Michal Simek:
"Just defconfig updates:
- enable NFS, Marvell phy
- sync defconfig with the latest Kconfig layout"
* tag 'microblaze-v6.8' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: defconfig: Enable the Marvell phy driver
microblaze: Enable options to mount a rootfs via NFS
microblaze: Align defconfig with latest Kconfig layout
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()
MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()
MIPS: Fix typos
MIPS: Remove unused shadow GPR support from vector irq setup
MIPS: Allow vectored interrupt handler to reside everywhere for 64bit
mips: Set dump-stack arch description
mips: mm: add slab availability checking in ioremap_prot
mips: Optimize max_mapnr init procedure
mips: Fix max_mapnr being uninitialized on early stages
mips: Fix incorrect max_low_pfn adjustment
mips: dmi: Fix early remap on MIPS32
MIPS: compressed: Use correct instruction for 64 bit code
MIPS: SGI-IP27: hubio: fix nasid kernel-doc warning
MAINTAINERS: Add myself as maintainer of the Ralink architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Mark 32bit syscall helpers as clobbering memory
um: Remove unused register save/restore functions
um: Rely on PTRACE_SETREGSET to set FS/GS base registers
Documentation: kunit: Add clang UML coverage example
arch: um: Add Clang coverage support
um: time-travel: fix time corruption
um: net: Fix return type of uml_net_start_xmit()
um: Always inline stub functions
um: Do not use printk in userspace trampoline
um: Reap winch thread if it fails
um: Do not use printk in SIGWINCH helper thread
um: Don't use vfprintf() for os_info()
um: Make errors to stop ptraced child fatal during startup
um: Drop NULL check from start_userspace
um: Drop support for hosts without SYSEMU_SINGLESTEP support
um: document arch_futex_atomic_op_inuser
um: mmu: remove stub_pages
um: Fix naming clash between UML and scheduler
um: virt-pci: fix platform map offset
|
|
1, Increase NR_CPUS to 256.
2, Enable some cgroup options.
3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options.
4, Enable some CMA/DMA_CMA options.
5, Enable some F2FS options.
6, Enable some DMABUF/UDMABUF options.
7, Enable some USB4 and NTB options.
8, Enable some networking options (MPTCP).
9, Enable Loongson-specific drivers: APB DMA, ASoC.
10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine.
11, Remove obsolete SECURITY_SELINUX_DISABLE.
12, Regenerate the whole file to keep the order of options be the same as
the latest source code.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The test_tag test triggers an unhandled page fault:
# ./test_tag
[ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70
[ 130.640501] Oops[#3]:
[ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a
[ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40
[ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000
[ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000
[ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70
[ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0
[ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0
[ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000
[ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000
[ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988
[ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988
[ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 130.642658] BADV: ffff80001b898004
[ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)]
[ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd)
[ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8
[ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0
[ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000
[ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000
[ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000
[ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000
[ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558
[ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000
[ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc
[ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0
[ 130.644572] ...
[ 130.644629] Call Trace:
[ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988
[ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec
[ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0
[ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44
[ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588
[ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c
[ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94
[ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158
[ 130.645507]
[ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91
[ 130.645729]
[ 130.646418] ---[ end trace 0000000000000000 ]---
On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at
loading a BPF prog with 2039 instructions:
prog = (struct bpf_prog *)ffff80001b894000
insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048
insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page
In the build_insn() function, we are trying to access next instruction
unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next
page and can be not owned by the current process, thus an page fault is
inevitable and then segfault.
So, let's access next instruction only under `dst = imm64` context.
With this fix, we have:
# ./test_tag
test_tag: OK (40945 tests)
Fixes: bbfddb904df6f82 ("LoongArch: BPF: Avoid declare variables in switch-case")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like commit 1cf3bfc60f9836f ("bpf: Support 64-bit pointers to kfuncs")
for s390x, add support for 64-bit pointers to kfuncs for LoongArch.
Since the infrastructure is already implemented in BPF core, the only
thing need to be done is to override bpf_jit_supports_far_kfunc_call().
Before this change, several test_verifier tests failed:
# ./test_verifier | grep # | grep FAIL
#119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL
#120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL
#121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL
#122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL
#123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL
#124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL
#125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL
#126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL
#127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL
#128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL
#129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL
#130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL
#486/p map_kptr: ref: reference state created and released on xchg FAIL
This is because the kfuncs in the loaded module are far away from
__bpf_call_base:
ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod]
9000000002e128d8 T __bpf_call_base
The offset relative to __bpf_call_base does NOT fit in s32, which breaks
the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts
this limit.
Note that to reproduce the above result, tools/testing/selftests/bpf/config
should be applied, and run the test with JIT enabled, unpriv BPF enabled.
With this change, the test_verifier tests now all passed:
# ./test_verifier
...
Summary: 777 PASSED, 0 SKIPPED, 0 FAILED
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The current definition of ftrace_regs_set_instruction_pointer() is not
correct. Obviously, this function is used to set instruction pointer but
not return value, so it should call instruction_pointer_set() instead of
regs_set_return_value().
There is no side effect by now because it is only used for kernel live-
patching which is not supported, so fix it to avoid failure when testing
livepatch in the future.
Fixes: 6fbff14a6382 ("LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch already supports two crashkernel regions in kexec-tools, so we
can directly use the common interface to support crashkernel=X,[high,low]
after commit 0ab97169aa0517079b ("crash_core: add generic function to do
reservation").
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, then define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic();
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/loongarch/Kconfig.
One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need to
take notice:
1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is
specified.
2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
and there is enough memory to be allocated under 4G.
3) When allocating crashkernel above 4G and no "crashkernel=X,low" is
specified, a 128M low memory will be allocated automatically for
swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.
Following test cases have been performed as expected:
1) crashkernel=256M //low=256M
2) crashkernel=1G //low=1G
3) crashkernel=4G //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high //high=4G, low=128M(default)
7) crashkernel=256M,low //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid
10) crashkernel=512M@2560M //low=512M
11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M
Recommended usage in general:
1) In the case of small memory: crashkernel=512M
2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There has been a lingering bug in LoongArch Linux systems causing some
GCC tests to intermittently fail (see Closes link). I've made a minimal
reproducer:
zsh% cat measure.s
.align 4
.globl _start
_start:
movfcsr2gr $a0, $fcsr0
bstrpick.w $a0, $a0, 16, 16
beqz $a0, .ok
break 0
.ok:
li.w $a7, 93
syscall 0
zsh% cc mesaure.s -o measure -nostdlib
zsh% echo $((1.0/3))
0.33333333333333331
zsh% while ./measure; do ; done
This while loop should not stop as POSIX is clear that execve must set
fenv to the default, where FCSR should be zero. But in fact it will
just stop after running for a while (normally less than 30 seconds).
Note that "$((1.0/3))" is needed to reproduce this issue because it
raises FE_INVALID and makes fcsr0 non-zero.
The problem is we are currently relying on SET_PERSONALITY2() to reset
current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before
start_thread which calls lose_fpu(0). We can see if kernel preempt is
enabled, we may switch to another thread after SET_PERSONALITY2() but
before lose_fpu(0). Then bad thing happens: during the thread switch
the value of the fcsr0 register is stored into current->thread.fpu.fcsr,
making it dirty again.
The issue can be fixed by setting current->thread.fpu.fcsr after
lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread
switch won't touch current->thread.fpu.fcsr.
The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS.
I've ran a similar test on MIPS with mainline kernel and it turns out
MIPS is buggy, too. Anyway MIPS do this for supporting different FP
flavors (NaN encodings, etc.) which do not exist on LoongArch. So for
LoongArch, we can simply remove the current->thread.fpu.fcsr setting
from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0).
The while loop failing with the mainline kernel has survived one hour
after this change on LoongArch.
Fixes: 803b0fc5c3f2baa ("LoongArch: Add process management")
Closes: https://github.com/loongson-community/discussions/issues/7
Link: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now loongson_system_configuration::cores_io_master only covers 64 cpus,
if NR_CPUS > 64 there will be memory corruption. So let cores_io_master
cover the largest NR_CPUS (256).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch has hardware page coloring for L1 Cache, so we don't have
cache aliases. But SFB (Store Fill Buffer) still has aliases. So we
define SHMLBA to SZ_64K previously. But there are losts of applications
use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages.
Of course we can fix them one by one, but not easy.
On the other hand, we can simply disable SFB for 4KB page size to fix
cache alias (there will be performance decrease, but acceptable), and
in future we will fix SFB in hardware. So we can safely define SHMLBA to
PAGE_SIZE (use the generic shmparam.h) to make life easier.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update"
feature. But ESRT initialization is missing on LoongArch now, so add a
call to efi_esrt_init() at the end of efi_init().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Generally, we can get cpu-related information, such as model name, from
/proc/cpuinfo. For FDT-based systems, we need to parse the relevant
information from DTS.
BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS
doesn't provide a valid number (usually FDT-based systems).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add DeviceTree file for Loongson-2K2000 processor, which integrates two
64-bit 3-issue superscalar LA364 processor cores.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add DeviceTree file for Loongson-2K1000 processor, which integrates two
64-bit 2-issue superscalar LA264 processor cores.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add DeviceTree file for Loongson-2K0500 processor, which integrates one
64-bit 2-issue superscalar LA264 processor core.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.
We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.
And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Enable initial Rust support for LoongArch.
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
- Convert pci-host-common.c platform .remove() callback to .remove_new()
returning 'void' since it's not useful to return error codes here (Uwe
Kleine-König)
- Log a message about updating AMD USB controller class code (so dwc3, not
xhci, claims it) only when we actually change it (Guilherme G. Piccoli)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc
(Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather
than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen)
* pci/enumeration:
PCI: Fix 64GT/s effective data rate calculation
x86/pci: Clean up open-coded PCIBIOS return code mangling
scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal
powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
x86/pci: Use PCI_HEADER_TYPE_* instead of literals
PCI: Only override AMD USB controller if required
PCI: host-generic: Convert to platform remove callback returning void
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Split function paiext_push_sample() into two parts. The first part
determines the number of bytes to store as raw data in the perf sample
record. This is now function paiext_have_sample().
The second part stores the raw data in the perf event's ring buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Change the function paiext_copy() parameter from a pointer to a
structure to two pointers to memory areas referenced. The other
members of that structure are not needed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
