summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-01-18ARM: dts: sunxi: Fix the LED node namesMaxime Ripard
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20210114113538.1233933-6-maxime@cerno.tech
2021-01-18ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definitionPaul Kocialkowski
This adds a device-tree definition for the CSI0 MCLK pin, which can be used for feeding MIPI CSI-2 sensors. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-01-18arm64: dts: allwinner: h6: Add RSB controller nodeSamuel Holland
The H6 SoC contains an undocumented but fully functional RSB controller. Add support for it. The MMIO register address matches other SoCs of the same generation, and the IRQ matches a hole in the documented IRQ list. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <mripard@kernel.org> [wens@csie.org: Use raw numbers instead of macros for clock/reset index] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-01-14arm64: dts: allwinner: Pine H64: Enable HS200 eMMC modeAndre Przywara
The eMMC modules offered for the Pine64 boards are capable of the HS200 eMMC speed mode, when observing the frequency limit of 150 MHz. Enable that in the DT. This increases the interface speed from ~80 MB/s to ~120 MB/s. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-9-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: Pine64-LTS/SoPine: Enable HS200 eMMC modeAndre Przywara
The eMMC modules offered for the Pine64 boards are capable of the HS200 eMMC speed mode, when observing the frequency limit of 150 MHz. Enable that in the DT. This increases the interface speed from ~80 MB/s to ~120 MB/s. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-8-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHzAndre Przywara
In contrast to the H6 (and later) manuals, the A64 datasheet does not specify any limitations in the maximum possible frequency for eMMC controllers. However experimentation has found that a 150 MHz limit similar to other SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist for the MMC2 controller. Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi. The Pinebook seems to be the an odd exception, since it apparently seems to work with 200 MHz as well, so overwrite this in its board .dts file. Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works. Fixes: 22be992faea7 ("arm64: allwinner: a64: Increase the MMC max frequency") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-7-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequencyAndre Przywara
The H6 manual explicitly lists a frequency limit of 150 MHz for the bus frequency of the MMC controllers. So far we had no explicit limits in the DT, which limited eMMC to the spec defined frequencies, or whatever the driver defines (both Linux and FreeBSD use 52 MHz here). Put those maximum frequencies in the SoC .dtsi, to allow higher speed modes (which still would need to be explicitly enabled, per board). Tested with an eMMC using HS-200 on a Pine H64. Running at the spec'ed 200 MHz indeed fails with I/O errors, but 150 MHz seems to work stably. Fixes: 8f54bd1595b3 ("arm64: allwinner: h6: add device tree nodes for MMC controllers") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-6-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD cardAndre Przywara
The SD card on the SoPine SoM module is somewhat concealed, so was originally defined as "non-removable". However there is a working card-detect pin (tested on two different SoM versions), and in certain SoM base boards it might be actually accessible at runtime. Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the non-removable flag, even though the SD card slot is perfectly accessible and usable there. (It turns out that just *my* board has a broken card detect switch, so I originally thought CD wouldn't work on the LTS.) Drop the "non-removable" flag to describe the SD card slot properly. Fixes: c3904a269891 ("arm64: allwinner: a64: add DTSI file for SoPine SoM") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: Pine64-LTS: Add status LEDAndre Przywara
The Pine64-LTS board features a blue status LED on pin PL7. Describe it in the DT. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-4-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: H6: properly connect USB PHY to port 0Andre Przywara
In recent Allwinner SoCs the first USB host controller (HCI0) shares the first PHY with the MUSB controller. Probably to make this sharing work, we were avoiding to declare this in the DT. This has two shortcomings: - U-Boot (which uses the same .dts) cannot use this port in host mode without a PHY linked, so we were loosing one USB port there. - It requires the MUSB driver to be enabled and loaded, although we don't actually use it. To avoid those issues, let's add this PHY link to the H6 .dtsi file. After all PHY port 0 *is* connected to HCI0, so we should describe it as this. This makes it work in U-Boot, also improves compatiblity when no MUSB driver is loaded (for instance in distribution installers). Fixes: eabb3d424b6d ("arm64: dts: allwinner: h6: add USB2-related device nodes") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-3-andre.przywara@arm.com
2021-01-14arm64: dts: allwinner: A64: properly connect USB PHY to port 0Andre Przywara
In recent Allwinner SoCs the first USB host controller (HCI0) shares the first PHY with the MUSB controller. Probably to make this sharing work, we were avoiding to declare this in the DT. This has two shortcomings: - U-Boot (which uses the same .dts) cannot use this port in host mode without a PHY linked, so we were loosing one USB port there. - It requires the MUSB driver to be enabled and loaded, although we don't actually use it. To avoid those issues, let's add this PHY link to the A64 .dtsi file. After all PHY port 0 *is* connected to HCI0, so we should describe it as this. Remove the part from the Pinebook DTS which already had this property. This makes it work in U-Boot, also improves compatiblity when no MUSB driver is loaded (for instance in distribution installers). Fixes: dc03a047df1d ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
2021-01-13arm64: dts: allwinner: h6: PineH64 model B: Add bluetoothJernej Skrabec
PineH64 model B has wifi+bt combo module. Wifi is already supported, so lets add also bluetooth node. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210110211606.3733056-1-jernej.skrabec@siol.net
2021-01-13arm64: dts: allwinner: pinephone: Support volume key wakeupSamuel Holland
PinePhone volume keys are connected to the LRADC in the A64. Users may want to use them to wake the device from sleep. Support this by declaring the LRADC as a wakeup source. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210113040542.34247-4-samuel@sholland.org
2021-01-13ARM: dts: sun5i: add A10s/A13 mali gpu support fallbackSergio Sota
The A10s/A13 mali gpu was not defined in device tree Add A10 mali gpu as a fallback for A10s/A13 Tested with Olimex-A13-SOM / Olimex-A13-OlinuXino-MICRO "kmscube" 3d cube on screen (60fps / 10%cpu) Versions: Lima:1.1.0 EGL:1.4 OpenGLES:2.0 Mesa:20.2.2 Signed-off-by: Sergio Sota <sergiosota@fanamoel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210108103819.322901-1-sergiosota@fanamoel.com
2021-01-07arm64: dts: allwinner: h5: Add deinterlace nodeJernej Skrabec
Deinterlace core is completely compatible to H3. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210106182523.1325796-1-jernej.skrabec@siol.net
2021-01-07ARM: dts: sun8i: r40: Add deinterlace nodeJernej Skrabec
R40 contains deinterlace core compatible to that in H3. One peculiarity is that RAM gate is shared with CSI1. User manual states it's separate but that's not true. Shared gate was verified with BSP Linux code check and with runtime tests (CPU crashed if CSI1 gate was not ungated). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210106181901.1324075-3-jernej.skrabec@siol.net
2021-01-06arm64: allwinner: dts: pinephone: add 'pine64, pinephone' to the compatible listDylan Van Assche
All revisions of the PinePhone share most of the hardware. This patch makes it easier to detect PinePhone hardware without having to check for each possible revision. Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201230104205.5592-1-me@dylanvanassche.be
2021-01-06dt-bindings: arm: sunxi: document orig PineTab DT as sampleIcenowy Zheng
As the original PineTab DT (which uses sun50i-a64-pinetab name) is only for development samples, document this. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201224024138.19422-1-icenowy@aosc.io
2021-01-06arm64: allwinner: dts: a64: add DT for Early Adopter's PineTabIcenowy Zheng
PineTabs since Early Adopter batch will use a new LCD panel. Add device tree for PineTab with the new panel. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201224024001.19248-2-icenowy@aosc.io
2021-01-06ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff nodeMichael Klein
Add add devicetree information for the regulator-poweroff driver. Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201211151445.115943-4-michael@fossekall.de
2021-01-06ARM: dts: sun8i-v3: Add support for the SL631 Action Camera with IMX179Paul Kocialkowski
The SL631 is a family of Allwinner V3 action cameras sold under various names, such as SJCAM SJ4000 Air or F60 Action Camera. Devices in this family share a common board design but can be found with different image sensors, including the IMX179 and the OV4689. This adds support for a common dtsi for the SL631 family as well as a specific dts for the IMX179 fashion, which will later be populated with an IMX179 node when a driver is available. Features that were tested on the device include: - UART debug - MMC - USB peripheral (e.g. g_ether) - Buttons - SPI NOR flash Note that the exact designer/vendor of these boards is unknown. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201206165131.1041983-6-contact@paulk.fr
2021-01-06ARM: dts: sun8i: Cleanup the Pinecube AXP209 nodePaul Kocialkowski
This fixes a few things with the Pinecube AXP209 node: - No compatible is required since it is using an AXP209 (not AXP203) according to the schematics and this is what the included axp209.dtsi already has; - The interrupt-controller and #interrupt-cells properties are already described in the included axp209.dtsi; - The interrupt comes through the NMI controller, not directly through the GIC. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201206165131.1041983-4-contact@paulk.fr
2021-01-06ARM: dts: sun8i-v3s: Add the V3s NMI IRQ controllerPaul Kocialkowski
The V3s/V3 has a NMI interrupt controller, mainly used for the AXP209. Its address follows the system controller block, which was previously incorrectly described as spanning over 0x1000 address bytes. Even though this is what the Allwinner documentation indicates, precedence from other SoCs such as the R40 suggests that this is not actually the case. This reduces the system controller address span up to the NMI controller and adds a node for the controller, with its dedicated compatible. While the interrupt number was found in Allwinner's documentation, the address for the controller is specified in any Allwinner SDK supporting sun8iw8 (V3/V3s) at: drivers/power/axp_power/axp20/axp20-board.c It was tested to work on a V3 board with an AXP209 connected to the NMI interrupt line. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201206165131.1041983-3-contact@paulk.fr
2021-01-04ARM: dts: sun6i-a31s-sinovoip-bpi-m2: add gpio-line-namesMichael Klein
Add gpio-line-names as documented on gitbooks [1] and in the schematics [2]. [1]: https://bananapi.gitbook.io/bpi-m2/en/bpi-m2_gpio_pin_define [2]: https://drive.google.com/file/d/0B4PAo2nW2KfnRERWNnJGSGxJbmM/view Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201202195144.2105036-1-michael@fossekall.de
2020-12-28ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add regulator nodes vcc-dram and ↵Michael Klein
vcc1v2 Add regulator nodes vcc-dram and vcc1v2 to the devicetree. These regulators correspond to U4 and U5 in the schematics: http://forum.banana-pi.org/t/bpi-m2-zero-schematic-diagram-public/4111 Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201130183841.136708-1-michael@fossekall.de
2020-12-24Merge tag 'riscv-for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt "Avoid trying to initialize memory regions outside the usable range" * tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix usage of memblock_enforce_memory_limit
2020-12-24Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-22Merge tag 'kbuild-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge KASAN updates from Andrew Morton. This adds a new hardware tag-based mode to KASAN. The new mode is similar to the existing software tag-based KASAN, but relies on arm64 Memory Tagging Extension (MTE) to perform memory and pointer tagging (instead of shadow memory and compiler instrumentation). By Andrey Konovalov and Vincenzo Frascino. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits) kasan: update documentation kasan, mm: allow cache merging with no metadata kasan: sanitize objects when metadata doesn't fit kasan: clarify comment in __kasan_kfree_large kasan: simplify assign_tag and set_tag calls kasan: don't round_up too much kasan, mm: rename kasan_poison_kfree kasan, mm: check kasan_enabled in annotations kasan: add and integrate kasan boot parameters kasan: inline (un)poison_range and check_invalid_free kasan: open-code kasan_unpoison_slab kasan: inline random_tag for HW_TAGS kasan: inline kasan_reset_tag for tag-based modes kasan: remove __kasan_unpoison_stack kasan: allow VMAP_STACK for HW_TAGS mode kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK kasan: introduce set_alloc_info kasan: rename get_alloc/free_info kasan: simplify quarantine_put call site kselftest/arm64: check GCR_EL1 after context switch ...
2020-12-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linuxLinus Torvalds
Pull ARM updates from Russell King: - Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits) ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section ARM: 9038/1: Link with '-z norelro' ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro ARM: 9036/1: uncompress: Fix dbgadtb size parameter name ARM: 9035/1: uncompress: Add be32tocpu macro ARM: 9033/1: arm/smp: Drop the macro S(x,s) ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol ARM: 9044/1: vfp: use undef hook for VFP support detection ARM: 9034/1: __div64_32(): straighten up inline asm constraints ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler ARM: 9028/1: disable KASAN in call stack capturing routines ARM: 9026/1: unwind: remove old check for GCC <= 4.2 ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD ARM: 9024/1: Drop useless cast of "u64" to "long long" ARM: 9023/1: Spelling s/mmeory/memory/ ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak ARM: kvm: replace open coded VA->PA calculations with adr_l call ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET ...
2020-12-22Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - support for a partial IOMMU bypass (Alexey Kardashevskiy) - add a DMA API benchmark (Barry Song) - misc fixes (Tiezhu Yang, tangjianqiang) * tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping: selftests/dma: add test application for DMA_MAP_BENCHMARK dma-mapping: add benchmark support for streaming DMA APIs dma-contiguous: fix a typo error in a comment dma-pool: no need to check return value of debugfs_create functions powerpc/dma: Fallback to dma_ops when persistent memory present dma-mapping: Allow mixing bypass and mapped DMA operation
2020-12-22x86/split-lock: Avoid returning with interrupts enabledAndi Kleen
When a split lock is detected always make sure to disable interrupts before returning from the trap handler. The kernel exit code assumes that all exits run with interrupts disabled, otherwise the SWAPGS sequence can race against interrupts and cause recursing page faults and later panics. The problem will only happen on CPUs with split lock disable functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Fixes: bce9b042ec73 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: allow VMAP_STACK for HW_TAGS modeAndrey Konovalov
Even though hardware tag-based mode currently doesn't support checking vmalloc allocations, it doesn't use shadow memory and works with VMAP_STACK as is. Change VMAP_STACK definition accordingly. Link: https://lkml.kernel.org/r/ecdb2a1658ebd88eb276dee2493518ac0e82de41.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I3552cbc12321dec82cd7372676e9372a2eb452ac Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: unpoison stack only with CONFIG_KASAN_STACKAndrey Konovalov
There's a config option CONFIG_KASAN_STACK that has to be enabled for KASAN to use stack instrumentation and perform validity checks for stack variables. There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled. Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is enabled. Note, that CONFIG_KASAN_STACK is an option that is currently always defined when CONFIG_KASAN is enabled, and therefore has to be tested with #if instead of #ifdef. Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: enable CONFIG_KASAN_HW_TAGSAndrey Konovalov
Hardware tag-based KASAN is now ready, enable the configuration option. Link: https://lkml.kernel.org/r/a6fa50d3bb6b318e05c6389a44095be96442b8b0.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: print report from tag fault handlerAndrey Konovalov
Add error reporting for hardware tag-based KASAN. When CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag fault handler. SAS bits aren't set in ESR for all faults reported in EL1, so it's impossible to find out the size of the access the caused the fault. Adapt KASAN reporting code to handle this case. Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: implement HW_TAGS runtimeAndrey Konovalov
Provide implementation of KASAN functions required for the hardware tag-based mode. Those include core functions for memory and pointer tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt common KASAN code to support the new mode. Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: expand CONFIG_KASAN checksAndrey Konovalov
Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes (either related to shadow memory or compiler instrumentation). Expand those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS. Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, x86, s390: update undef CONFIG_KASANAndrey Konovalov
With the intoduction of hardware tag-based KASAN some kernel checks of this kind: ifdef CONFIG_KASAN will be updated to: if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) x86 and s390 use a trick to #undef CONFIG_KASAN for some of the code that isn't linked with KASAN runtime and shouldn't have any KASAN annotations. Also #undef CONFIG_KASAN_GENERIC with CONFIG_KASAN. Link: https://lkml.kernel.org/r/9d84bfaaf8fabe0fc89f913c9e420a30bd31a260.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: add arch layer for memory tagging helpersAndrey Konovalov
This patch add a set of arch_*() memory tagging helpers currently only defined for arm64 when hardware tag-based KASAN is enabled. These helpers will be used by KASAN runtime to implement the hardware tag-based mode. The arch-level indirection level is introduced to simplify adding hardware tag-based KASAN support for other architectures in the future by defining the appropriate arch_*() macros. Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: align allocations for HW_TAGSAndrey Konovalov
Hardware tag-based KASAN uses the memory tagging approach, which requires all allocations to be aligned to the memory granule size. Align the allocations to MTE_GRANULE_SIZE via ARCH_SLAB_MINALIGN when CONFIG_KASAN_HW_TAGS is enabled. Link: https://lkml.kernel.org/r/fe64131606b1c2aabfd34ae99554c0d9df18eb19.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: switch GCR_EL1 in kernel entry and exitVincenzo Frascino
When MTE is present, the GCR_EL1 register contains the tags mask that allows to exclude tags from the random generation via the IRG instruction. With the introduction of the new Tag-Based KASAN API that provides a mechanism to reserve tags for special reasons, the MTE implementation has to make sure that the GCR_EL1 setting for the kernel does not affect the userspace processes and viceversa. Save and restore the kernel/user mask in GCR_EL1 in kernel entry and exit. Link: https://lkml.kernel.org/r/578b03294708cc7258fad0dc9c2a2e809e5a8214.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: convert gcr_user into an exclude maskVincenzo Frascino
The gcr_user mask is a per thread mask that represents the tags that are excluded from random generation when the Memory Tagging Extension is present and an 'irg' instruction is invoked. gcr_user affects the behavior on EL0 only. Currently that mask is an include mask and it is controlled by the user via prctl() while GCR_EL1 accepts an exclude mask. Convert the include mask into an exclude one to make it easier the register setting. Note: This change will affect gcr_kernel (for EL1) introduced with a future patch. Link: https://lkml.kernel.org/r/946dd31be833b660334c4f93410acf6d6c4cf3c4.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: allow enabling in-kernel MTEVincenzo Frascino
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) feature and requires it to be enabled. MTE supports This patch adds a new mte_enable_kernel() helper, that enables MTE in Synchronous mode in EL1 and is intended to be called from KASAN runtime during initialization. The Tag Checking operation causes a synchronous data abort as a consequence of a tag check fault when MTE is configured in synchronous mode. As part of this change enable match-all tag for EL1 to allow the kernel to access user pages without faulting. This is required because the kernel does not have knowledge of the tags set by the user in a page. Note: For MTE, the TCF bit field in SCTLR_EL1 affects only EL1 in a similar way as TCF0 affects EL0. MTE that is built on top of the Top Byte Ignore (TBI) feature hence we enable it as part of this patch as well. Link: https://lkml.kernel.org/r/7352b0a0899af65c2785416c8ca6bf3845b66fa1.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: add in-kernel tag fault handlerVincenzo Frascino
Add the implementation of the in-kernel fault handler. When a tag fault happens on a kernel address: * MTE is disabled on the current CPU, * the execution continues. When a tag fault happens on a user address: * the kernel executes do_bad_area() and panics. The tag fault handler for kernel addresses is currently empty and will be filled in by a future commit. Link: https://lkml.kernel.org/r/20201203102628.GB2224@gaia Link: https://lkml.kernel.org/r/ad31529b073e22840b7a2246172c2b67747ed7c4.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: ensure CONFIG_ARM64_PAN is enabled with MTE] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: reset the page tag in page->flagsVincenzo Frascino
The hardware tag-based KASAN for compatibility with the other modes stores the tag associated to a page in page->flags. Due to this the kernel faults on access when it allocates a page with an initial tag and the user changes the tags. Reset the tag associated by the kernel to a page in all the meaningful places to prevent kernel faults on access. Note: An alternative to this approach could be to modify page_to_virt(). This though could end up being racy, in fact if a CPU checks the PG_mte_tagged bit and decides that the page is not tagged but another CPU maps the same with PROT_MTE and becomes tagged the subsequent kernel access would fail. Link: https://lkml.kernel.org/r/9073d4e973747a6f78d5bdd7ebe17f290d087096.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: mte: add in-kernel MTE helpersVincenzo Frascino
Provide helper functions to manipulate allocation and pointer tags for kernel addresses. Low-level helper functions (mte_assign_*, written in assembly) operate tag values from the [0x0, 0xF] range. High-level helper functions (mte_get/set_*) use the [0xF0, 0xFF] range to preserve compatibility with normal kernel pointers that have 0xFF in their top byte. MTE_GRANULE_SIZE and related definitions are moved to mte-def.h header that doesn't have any dependencies and is safe to include into any low-level header. Link: https://lkml.kernel.org/r/c31bf759b4411b2d98cdd801eb928e241584fd1f.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: enable armv8.5-a asm-arch optionVincenzo Frascino
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) which is an armv8.5-a architecture extension. Enable the correct asm option when the compiler supports it in order to allow the usage of ALTERNATIVE()s with MTE instructions. Link: https://lkml.kernel.org/r/d03d1157124ea3532eaeb77507988733f5734986.1606161801.git.andreyknvl@google.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-06-01 10:00:16 +0000