summaryrefslogtreecommitdiff
path: root/block/bio-integrity.c
AgeCommit message (Collapse)Author
2016-10-28block: remove bio_is_rwChristoph Hellwig
With the addition of the zoned operations the tests in this function became incorrect. But I think it's much better to just open code the allow operations in the only caller anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-20block: simplify and cleanup bvec pool handlingChristoph Hellwig
Instead of a flag and an index just make sure an index of 0 means no need to free the bvec array. Also move the constants related to the bvec pools together and use a consistent naming scheme for them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14block/bio-integrity.c: Add #include "blk.h"Bart Van Assche
This patch avoids that building with W=1 C=2 triggers the following warning: block/bio-integrity.c:35:6: warning: symbol 'blk_flush_integrity' was not declared. Should it be static? Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-09blk-integrity: checking for NULL instead of IS_ERRDan Carpenter
We recently changed bio_integrity_alloc() to return ERR_PTRs instead of NULL but these calls were missed. Fixes: 06c1e3902aa7 ('blk-integrity: empty implementation when disabled') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-03blk-integrity: empty implementation when disabledKeith Busch
This patch moves the blk_integrity_payload definition outside the CONFIG_BLK_DEV_INTERITY dependency and provides empty function implementations when the kernel configuration disables integrity extensions. This simplifies drivers that make use of these to map user data so they don't need to repeat the same configuration checks. Signed-off-by: Keith Busch <keith.busch@intel.com> Updated by Jens to pass an error pointer return from bio_integrity_alloc(), otherwise if CONFIG_BLK_DEV_INTEGRITY isn't set, we return a weird ENOMEM from __nvme_submit_user_cmd() if a meta buffer is set. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: blk_flush_integrity() for bio-based driversDan Williams
Since they lack requests to pin the request_queue active, synchronous bio-based drivers may have in-flight integrity work from bio_integrity_endio() that is not flushed by blk_freeze_queue(). Flush that work to prevent races to free the queue and the final usage of the blk_integrity profile. This is temporary unless/until bio-based drivers start to generically take a q_usage_counter reference while a bio is in-flight. Cc: Martin K. Petersen <martin.petersen@oracle.com> [martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case] Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: Reduce the size of struct blk_integrityMartin K. Petersen
The per-device properties in the blk_integrity structure were previously unsigned short. However, most of the values fit inside a char. The only exception is the data interval size and we can work around that by storing it as a power of two. This cuts the size of the dynamic portion of blk_integrity in half. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: Consolidate static integrity profile propertiesMartin K. Petersen
We previously made a complete copy of a device's data integrity profile even though several of the fields inside the blk_integrity struct are pointers to fixed template entries in t10-pi.c. Split the static and per-device portions so that we can reference the template directly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-11block: Refuse adding appending a gapped integrity page to a bioSagi Grimberg
This is only theoretical at the moment given that the only subsystems that generate integrity payloads are the block layer itself and the scsi target (which generate well aligned integrity payloads). But when we will expose integrity meta-data to user-space, we'll need to refuse appending a page with a gap (if the queue virtual boundary is set). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-07bio integrity: do not assume bio_integrity_pool exists if bioset existsMike Snitzer
bio_integrity_alloc() and bio_integrity_free() assume that if a bio was allocated from a bioset that that bioset also had its bio_integrity_pool allocated using bioset_integrity_create(). This is a very bad assumption given that bioset_create() and bioset_integrity_create() are completely disjoint. Not all callers of bioset_create() have been trained to also call bioset_integrity_create() -- and they may not care to be. Fix this by falling back to kmalloc'ing 'struct bio_integrity_payload' rather than force all bioset consumers to (wastefully) preallocate a bio_integrity_pool that they very likely won't actually need (given the niche nature of the current block integrity support). Otherwise, a NULL pointer "Kernel BUG" with a trace like the following will be observed (as seen on s390x using zfcp storage) because dm-io doesn't use bioset_integrity_create() when creating its bioset: [ 791.643338] Call Trace: [ 791.643339] ([<00000003df98b848>] 0x3df98b848) [ 791.643341] [<00000000002c5de8>] bio_integrity_alloc+0x48/0xf8 [ 791.643348] [<00000000002c6486>] bio_integrity_prep+0xae/0x2f0 [ 791.643349] [<0000000000371e38>] blk_queue_bio+0x1c8/0x3d8 [ 791.643355] [<000000000036f8d0>] generic_make_request+0xc0/0x100 [ 791.643357] [<000000000036f9b2>] submit_bio+0xa2/0x198 [ 791.643406] [<000003ff801f9774>] dispatch_io+0x15c/0x3b0 [dm_mod] [ 791.643419] [<000003ff801f9b3e>] dm_io+0x176/0x2f0 [dm_mod] [ 791.643423] [<000003ff8074b28a>] do_reads+0x13a/0x1a8 [dm_mirror] [ 791.643425] [<000003ff8074b43a>] do_mirror+0x142/0x298 [dm_mirror] [ 791.643428] [<0000000000154fca>] process_one_work+0x18a/0x3f8 [ 791.643432] [<000000000015598a>] worker_thread+0x132/0x3b0 [ 791.643435] [<000000000015d49a>] kthread+0xd2/0xd8 [ 791.643438] [<00000000005bc0ca>] kernel_thread_starter+0x6/0xc [ 791.643446] [<00000000005bc0c4>] kernel_thread_starter+0x0/0xc Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22block: remove management of bi_remaining when restoring original bi_end_ioMike Snitzer
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") regressed all existing callers that followed this pattern: 1) saving a bio's original bi_end_io 2) wiring up an intermediate bi_end_io 3) restoring the original bi_end_io from intermediate bi_end_io 4) calling bio_endio() to execute the restored original bi_end_io The regression was due to BIO_CHAIN only ever getting set if bio_inc_remaining() is called. For the above pattern it isn't set until step 3 above (step 2 would've needed to establish BIO_CHAIN). As such the first bio_endio(), in step 2 above, never decremented __bi_remaining before calling the intermediate bi_end_io -- leaving __bi_remaining with the value 1 instead of 0. When bio_inc_remaining() occurred during step 3 it brought it to a value of 2. When the second bio_endio() was called, in step 4 above, it should've called the original bi_end_io but it didn't because there was an extra reference that wasn't dropped (due to atomic operations being optimized away since BIO_CHAIN wasn't set upfront). Fix this issue by removing the __bi_remaining management complexity for all callers that use the above pattern -- bio_chain() is the only interface that _needs_ to be concerned with __bi_remaining. For the above pattern callers just expect the bi_end_io they set to get called! Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls that aren't associated with the bio_chain() interface. Also, the bio_inc_remaining() interface has been moved local to bio.c. Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-02block: fix regression where bio_integrity_process uses wrong bio_vec iteratorDarrick J. Wong
bio integrity handling is broken on a system with LVM layered atop a DIF/DIX SCSI drive because device mapper clones the bio, modifies the clone, and sends the clone to the lower layers for processing. However, the clone bio has bi_vcnt == 0, which means that when the sd driver calls bio_integrity_process to attach DIX data, the for_each_segment_all() call (which uses bi_vcnt) returns immediately and random garbage is sent to the disk on a disk write. The disk of course returns an error. Therefore, teach bio_integrity_process() to use bio_for_each_segment() to iterate the bio_vecs, since the per-bio iterator tracks which bio_vecs are associated with that particular bio. The integrity handling code is effectively part of the "driver" (it's not the bio owner), so it must use the correct iterator function. v2: Fix a compiler warning about abandoned local variables. This patch supersedes "block: bio_integrity_process uses wrong bio_vec iterator". Patch applies against 3.18-rc6. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-13bio-integrity: remove the needless fail handle of bip_slab creatingGu Zheng
bip_slab is created with SLAB_PANIC, so the fail handler is unneeded. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Integrity checksum flagMartin K. Petersen
Make the choice of checksum a per-I/O property by introducing a flag that can be inspected by the SCSI layer. There are several reasons for this: 1. It allows us to switch choice of checksum without unloading and reloading the HBA driver. 2. During error recovery we need to be able to tell the HBA that checksums read from disk should not be verified and converted to IP checksums. 3. For error injection purposes we need to be able to write a bad guard tag to storage. Since the storage device only supports T10 CRC we need to be able to disable IP checksum conversion on the HBA. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Relocate bio integrity flagsMartin K. Petersen
Move flags affecting the integrity code out of the bio bi_flags and into the block integrity payload. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Add prefix to block integrity profile flagsMartin K. Petersen
Add a BLK_ prefix to the integrity profile flags. Also rename the flags to be more consistent with the generate/verify terminology in the rest of the integrity code. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Clean up the code used to generate and verify integrity metadataMartin K. Petersen
Instead of the "operate" parameter we pass in a seed value and a pointer to a function that can be used to process the integrity metadata. The generation function is changed to have a return value to fit into this scheme. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Make protection interval calculation genericMartin K. Petersen
Now that the protection interval has been detached from the sector size we need to be able to handle sizes that are different from 4K and 512. Make the interval calculation generic. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Deprecate the use of the term sector in the context of block integrityMartin K. Petersen
The protection interval is not necessarily tied to the logical block size of a block device. Stop using the terms "sector" and "sectors". Going forward we will use the term "seed" to describe the initial reference tag value for a given I/O. "Interval" will be used to describe the portion of the data buffer that a given piece of protection information is associated with. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Remove bip_bufMartin K. Petersen
bip_buf is not really needed so we can remove it. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Remove integrity tagging functionsMartin K. Petersen
None of the filesystems appear interested in using the integrity tagging feature. Potentially because very few storage devices actually permit using the application tag space. Remove the tagging functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Replace bi_integrity with bi_specialMartin K. Petersen
For commands like REQ_COPY we need a way to pass extra information along with each bio. Like integrity metadata this information must be available at the bottom of the stack so bi_private does not suffice. Rename the existing bi_integrity field to bi_special and make it a union so we can have different bio extensions for each class of command. We previously used bi_integrity != NULL as a way to identify whether a bio had integrity metadata or not. Introduce a REQ_INTEGRITY to be the indicator now that bi_special can contain different things. In addition, bio_integrity(bio) will now return a pointer to the integrity payload (when applicable). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Get rid of bdev_integrity_enabled()Martin K. Petersen
bdev_integrity_enabled() is only used by bio_integrity_enabled(). Combine these two functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21block: Fix BUG_ON when pi errors occurSagi Grimberg
When getting a pi error we get to bio_integrity_end_io with bi_remaining already decremented to 0 where we will eventually need to call bio_endio with restored original bio completion handler. Calling bio_endio invokes a BUG_ON(). We should call bio_endio_nodec instead, like what is done in bio_integrity_verify_fn. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01bio-integrity: add "bip_max_vcnt" into struct bio_integrity_payloadGu Zheng
Commit 08778795 ("block: Fix nr_vecs for inline integrity vectors") from Martin introduces the function bip_integrity_vecs(get the useful vectors) to fix the issue about nr_vecs for inline integrity vectors that reported by David Milburn. But it seems that bip_integrity_vecs() will return the wrong number if the bio is not based on any bio_set for some reason(bio->bi_pool == NULL), because in that case, the bip_inline_vecs[0] is malloced directly. So here we add the bip_max_vcnt to record the count of vector slots, and cleanup the function bip_integrity_vecs(). Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-19block: move bio.c and bio-integrity.c from fs/ to block/Jens Axboe
They really belong in block/, especially now since it's not in drivers/block/ anymore. Additionally, the get_maintainer script gets it wrong when in fs/. Suggested-by: Christoph Hellwig <hch@infradead.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com>