summaryrefslogtreecommitdiff
path: root/block/blk-merge.c
AgeCommit message (Collapse)Author
2016-08-24block: make sure a big bio is split into at most 256 bvecsMing Lei
After arbitrary bio size was introduced, the incoming bio may be very big. We have to split the bio into small bios so that each holds at most BIO_MAX_PAGES bvecs for safety reason, such as bio_clone(). This patch fixes the following kernel crash: > [ 172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 > [ 172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a > [ 172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0 > [ 172.660399] Oops: 0000 [#1] SMP > [...] > [ 172.664780] Call Trace: > [ 172.664813] [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1] > [ 172.664846] [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4 > [ 172.664880] [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod] > [ 172.664912] [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155 > [ 172.664947] [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache] > [ 172.664981] [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache] > [ 172.665016] [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache] The issue can be reproduced by the following steps: - create one raid1 over two virtio-blk - build bcache device over the above raid1 and another cache device and bucket size is set as 2Mbytes - set cache mode as writeback - run random write over ext4 on the bcache device Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios) Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de> Reported-by: Eric Wheeler <bcache@lists.ewheeler.net> Cc: stable@vger.kernel.org (4.3+) Cc: Shaohua Li <shli@fb.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16block: Fix secure eraseAdrian Hunter
Commit 288dab8a35a0 ("block: add a separate operation type for secure erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering all the places REQ_OP_DISCARD was being used to mean either. Fix those. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 288dab8a35a0 ("block: add a separate operation type for secure erase") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-20block: Fix front merge checkDamien Le Moal
For a front merge, the maximum number of sectors of the request must be checked against the front merge BIO sector, not the current sector of the request. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: do not merge requests without consulting with io schedulerTahsin Erdogan
Before merging a bio into an existing request, io scheduler is called to get its approval first. However, the requests that come from a plug flush may get merged by block layer without consulting with io scheduler. In case of CFQ, this can cause fairness problems. For instance, if a request gets merged into a low weight cgroup's request, high weight cgroup now will depend on low weight cgroup to get scheduled. If high weigt cgroup needs that io request to complete before submitting more requests, then it will also lose its timeslice. Following script demonstrates the problem. Group g1 has a low weight, g2 and g3 have equal high weights but g2's requests are adjacent to g1's requests so they are subject to merging. Due to these merges, g2 gets poor disk time allocation. cat > cfq-merge-repro.sh << "EOF" #!/bin/bash set -e IO_ROOT=/mnt-cgroup/io mkdir -p $IO_ROOT if ! mount | grep -qw $IO_ROOT; then mount -t cgroup none -oblkio $IO_ROOT fi cd $IO_ROOT for i in g1 g2 g3; do if [ -d $i ]; then rmdir $i fi done mkdir g1 && echo 10 > g1/blkio.weight mkdir g2 && echo 495 > g2/blkio.weight mkdir g3 && echo 495 > g3/blkio.weight RUNTIME=10 (echo $BASHPID > g1/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=0k &> /dev/null)& (echo $BASHPID > g2/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=64k &> /dev/null)& (echo $BASHPID > g3/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=256k &> /dev/null)& sleep $((RUNTIME+1)) for i in g1 g2 g3; do echo ---- $i ---- cat $i/blkio.time done EOF # ./cfq-merge-repro.sh ---- g1 ---- 8:16 162 ---- g2 ---- 8:16 165 ---- g3 ---- 8:16 686 After applying the patch: # ./cfq-merge-repro.sh ---- g1 ---- 8:16 90 ---- g2 ---- 8:16 445 ---- g3 ---- 8:16 471 Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09block: add a separate operation type for secure eraseChristoph Hellwig
Instead of overloading the discard support with the REQ_SECURE flag. Use the opportunity to rename the queue flag as well, and remove the dead checks for this flag in the RAID 1 and RAID 10 drivers that don't claim support for secure erase. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: convert merge/insert code to check for REQ_OPs.Mike Christie
This patch converts the block layer merging code to use separate variables for the operation and flags, and to check req_op for the REQ_OP. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, cgroup: use op_is_write helper instead of checking for REQ_WRITEMike Christie
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This patch converts the drivers and cgroup to use the op_is_write helper. This should just cover the simple cases. I did dm, md and bcache in their own patches because they were more involved. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03block: merge: get the 1st and last bvec via helpersMing Lei
This patch applies the two introduced helpers to figure out the 1st and last bvec. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-22block: fix bio splitting on max sectorsMing Lei
After commit e36f62042880(block: split bios to maxpossible length), bio can be splitted in the middle of a vector entry, then it is easy to split out one bio which size isn't aligned with block size, especially when the block size is bigger than 512. This patch fixes the issue by making the max io size aligned to logical block size. Fixes: e36f62042880(block: split bios to maxpossible length) Reported-by: Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-19Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "We don't have a lot of core changes this time around, it's mostly in drivers, which will come in a subsequent pull. The cores changes include: - blk-mq - Prep patch from Christoph, changing blk_mq_alloc_request() to take flags instead of just using gfp_t for sleep/nosleep. - Doc patch from me, clarifying the difference between legacy and blk-mq for timer usage. - Fixes from Raghavendra for memory-less numa nodes, and a reuse of CPU masks. - Cleanup from Geliang Tang, using offset_in_page() instead of open coding it. - From Ilya, rename request_queue slab to it reflects what it holds, and a fix for proper use of bdgrab/put. - A real fix for the split across stripe boundaries from Keith. We yanked a broken version of this from 4.4-rc final, this one works. - From Mike Krinkin, emit a trace message when we split. - From Wei Tang, two small cleanups, not explicitly clearing memory that is already cleared" * 'for-4.5/core' of git://git.kernel.dk/linux-block: block: use bd{grab,put}() instead of open-coding block: split bios to max possible length block: add call to split trace point blk-mq: Avoid memoryless numa node encoded in hctx numa_node blk-mq: Reuse hardware context cpumask for tags blk-mq: add a flags parameter to blk_mq_alloc_request Revert "blk-flush: Queue through IO scheduler when flush not required" block: clarify blk_add_timer() use case for blk-mq bio: use offset_in_page macro block: do not initialise statics to 0 or NULL block: do not initialise globals to 0 or NULL block: rename request_queue slab cache
2016-01-12block: split bios to max possible lengthKeith Busch
This splits bio in the middle of a vector to form the largest possible bio at the h/w's desired alignment, and guarantees the bio being split will have some data. The criteria for splitting is changed from the max sectors to the h/w's optimal sector alignment if it is provided. For h/w that advertise their block storage's underlying chunk size, it's a big performance win to not submit commands that cross them. If sector alignment is not provided, this patch uses the max sectors as before. This addresses the performance issue commit d380561113 attempted to fix, but was reverted due to splitting logic error. Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: <stable@vger.kernel.org> # 4.4.x- Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-08Revert "block: Split bios on chunk boundaries"Jens Axboe
This reverts commit d3805611130af9b911e908af9f67a3f64f4f0914. If we end up splitting on the first segment, we don't adjust the sector count. That results in hitting a BUG() with attempting to split 0 sectors. As this is just a performance issue and not a regression since 4.3 release, let's just rever this change. That gives us more time to test a real fix for 4.5, which would be marked for stable anyway.
2015-12-22block: Split bios on chunk boundariesKeith Busch
For h/w that advertise their block storage's underlying chunk size, it's a big performance win to not submit commands that cross them. This patch uses that criteria if it is provided. If it is not provided, this patch uses the max sectors as before. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-03block: add call to split trace pointMike Krinkin
There is a split tracepoint that is supposed to be called when bio is splitted, and it was called in bio_split function until commit 4b1faf931650d4a35b2a ("block: Kill bio_pair_split()"). But now, no one reports splits, so this patch adds call to trace_block_split back in blk_queue_split right after split. Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-30blk-merge: fix computing bio->bi_seg_front_size in case of single segmentMing Lei
When bio has only one physical segment, we should set bio's bi_seg_front_size as the real(final) size of the single segment. Fixes: 02e707424c2ea(blk-merge: fix blk_bio_segment_split) Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23blk-merge: warn if figured out segment number is bigger than nr_phys_segmentsMing Lei
We had seen lots of reports of this kind issue, so add one warnning in blk-merge, then it can be triggered easily and avoid to depend on warning/bug from drivers. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23blk-merge: fix blk_bio_segment_splitMing Lei
Commit bdced438acd83a(block: setup bi_phys_segments after splitting) introduces function of computing bio->bi_phys_segments during bio splitting. Unfortunately both bio->bi_seg_front_size and bio->bi_seg_back_size arn't computed, so too many physical segments may be obtained for one request since both the two are used to check if one segment across two bios can be possible. This patch fixes the issue by computing the two variables in blk_bio_segment_split(). Fixes: bdced438acd83a(block: setup bi_phys_segments after splitting) Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Mark Salter <msalter@redhat.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23block: fix segment splitMing Lei
Inside blk_bio_segment_split(), previous bvec pointer(bvprvp) always points to the iterator local variable, which is obviously wrong, so fix it by pointing to the local variable of 'bvprv'. Fixes: 5014c311baa2b(block: fix bogus compiler warnings in blk-merge.c) Cc: stable@kernel.org #4.3 Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Mark Salter <msalter@redhat.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: avoid to merge splitted bioMing Lei
The splitted bio has been already too fat to merge, so mark it as NOMERGE. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: setup bi_phys_segments after splittingMing Lei
The number of bio->bi_phys_segments is always obtained during bio splitting, so it is natural to setup it just after bio splitting, then we can avoid to compute nr_segment again during merge. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-17block: blk-merge: fast-clone bio when splitting rw biosMing Lei
biovecs has become immutable since v3.13, so it isn't necessary to allocate biovecs for the new cloned bios, then we can save one extra biovecs allocation/copy, and the allocation is often not fixed-length and a bit more expensive. For example, if the 'max_sectors_kb' of null blk's queue is set as 16(32 sectors) via sysfs just for making more splits, this patch can increase throught about ~70% in the sequential read test over null_blk(direct io, bs: 1M). Cc: Christoph Hellwig <hch@infradead.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> This fixes a performance regression introduced by commit 54efd50bfd, and allows us to take full advantage of the fact that we have immutable bio_vecs. Hand applied, as it rejected violently with commit 5014c311baa2. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-11block: Refuse request/bio merges with gaps in the integrity payloadSagi Grimberg
If a driver sets the block queue virtual boundary mask, it means that it cannot handle gaps so we must not allow those in the integrity payload as well. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Fixed up by me to have duplicate integrity merge functions, depending on whether block integrity is enabled or not. Fixes a compilations issue with CONFIG_BLK_DEV_INTEGRITY unset. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-03block: Check for gaps on front and back mergesJens Axboe
We are checking for gaps to previous bio_vec, which can only detect back merges gaps. Moreover, at the point where we check for a gap, we don't know if we will attempt a back or a front merge. Thus, check for gap to prev in a back merge attempt and check for a gap to next in a front merge attempt. Signed-off-by: Jens Axboe <axboe@fb.com> [sagig: Minor rename change] Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
2015-09-02block: fix bogus compiler warnings in blk-merge.cJens Axboe
The compiler can't figure out that bvprv is initialized whenever 'prev' is set to 1 as well. Use a pointer to bvprv instead, setting it to NULL initially, and get rid of the 'prev' tracking. This dumbs it down enough that gcc is happy. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-02Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-09-01blk: Fix bio_io_vec index when checking bvec gapsKeith Busch
Corrects a coding error from earlier patch. Reported by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Keith Busch <keith.busch@intel.com> Fixes: 03100aada96f ("block: Replace SG_GAPS with new queue limits mask") Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19block: Replace SG_GAPS with new queue limits maskKeith Busch
The SG_GAPS queue flag caused checks for bio vector alignment against PAGE_SIZE, but the device may have different constraints. This patch adds a queue limits so a driver with such constraints can set to allow requests that would have been unnecessarily split. The new gaps check takes the request_queue as a parameter to simplify the logic around invoking this function. This new limit makes the queue flag redundant, so removing it and all usage. Device-mappers will inherit the correct settings through blk_stack_limits(). Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17scatterlist: remove open coded sg_unmark_end instancesDan Williams
Signed-off-by: Dan Williams <dan.j.williams@intel.com> [hch: split from a larger patch by Dan] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: kill merge_bvec_fn() completelyKent Overstreet
As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: make generic_make_request handle arbitrarily sized biosKent Overstreet
The way the block layer is currently written, it goes to great lengths to avoid having to split bios; upper layer code (such as bio_add_page()) checks what the underlying device can handle and tries to always create bios that don't need to be split. But this approach becomes unwieldy and eventually breaks down with stacked devices and devices with dynamic limits, and it adds a lot of complexity. If the block layer could split bios as needed, we could eliminate a lot of complexity elsewhere - particularly in stacked drivers. Code that creates bios can then create whatever size bios are convenient, and more importantly stacked drivers don't have to deal with both their own bio size limitations and the limitations of the (potentially multiple) devices underneath them. In the future this will let us delete merge_bvec_fn and a bunch of other code. We do this by adding calls to blk_queue_split() to the various make_request functions that need it - a few can already handle arbitrary size bios. Note that we add the call _after_ any call to blk_queue_bounce(); this means that blk_queue_split() and blk_recalc_rq_segments() don't need to be concerned with bouncing affecting segment merging. Some make_request_fn() callbacks were simple enough to audit and verify they don't need blk_queue_split() calls. The skipped ones are: * nfhd_make_request (arch/m68k/emu/nfblock.c) * axon_ram_make_request (arch/powerpc/sysdev/axonram.c) * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c) * brd_make_request (ramdisk - drivers/block/brd.c) * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c) * loop_make_request * null_queue_bio * bcache's make_request fns Some others are almost certainly safe to remove now, but will be left for future patches. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Geoff Levand <geoff@infradead.org> Cc: Jim Paris <jim@jtan.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: skip more mq-based drivers, resolve merge conflicts, etc.] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: manipulate bio->bi_flags through helpersJens Axboe
Some places use helpers now, others don't. We only have the 'is set' helper, add helpers for setting and clearing flags too. It was a bit of a mess of atomic vs non-atomic access. With BIO_UPTODATE gone, we don't have any risk of concurrent access to the flags. So relax the restriction and don't make any of them atomic. The flags that do have serialization issues (reffed and chained), we already handle those separately. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-29block: only honor SG gap prevention for merges that contain dataJens Axboe
We can safely merge anything that wont generate an SG list entry, so if the bio is data-less (discard), don't look at potential SG gaps. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-20Fix bug in blk_rq_merge_okWenbo Wang
Use the right array index to reference the last element of rq->biotail->bi_io_vec[] Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com> Reviewed-by: Chong Yuan <chong.yuan@memblaze.com> Fixes: 66cb45aa41315 ("block: add support for limiting gaps in SG lists") Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-11block: remove unused function blk_bio_map_sgChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-11block: prevent request-to-request merging with gaps if not allowedKeith Busch
If the queue has SG_GAPS set, we must not merge across an sg gap. This is caught for the bio case, but currently not for the more rare case of merging two requests directly. Signed-off-by: Keith Busch <keith.busch@intel.com> Cut the dm bits, those will go through the dm tree, and fixed the test_bit() test. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-11block: blk-merge: fix blk_recount_segments()Ming Lei
For cloned bio, bio->bi_vcnt can't be used at all, and we have resort to bio_segments() to figure out how many segment there are in the bio. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-21blk-merge: recaculate segment if it isn't less than max segmentsMing Lei
The problem is introduced by commit 764f612c6c3c231b(blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio), and merge is needed if number of current segment isn't less than max segments. Strictly speaking, bio->bi_vcnt shouldn't be used here since it may not be accurate in cases of both cloned bio or bio cloned from, but bio_segments() is a bit expensive, and bi_vcnt is still the biggest number, so the approach should work. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-09blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bioMing Lei
It isn't correct to figure out req->bi_phys_segments from bio->bi_vcnt if the bio is cloned. Signed-off-by: Ming Lei <ming.lei@canonical.com> Tested-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Don't merge requests if integrity flags differMartin K. Petersen
We'd occasionally merge requests with conflicting integrity flags. Introduce a merge helper which checks that the requests have compatible integrity payloads. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-02blk-merge: fix blk_recount_segmentsMing Lei
QUEUE_FLAG_NO_SG_MERGE is set at default for blk-mq devices, so bio->bi_phys_segment computed may be bigger than queue_max_segments(q) for blk-mq devices, then drivers will fail to handle the case, for example, BUG_ON() in virtio_queue_rq() can be triggerd for virtio-blk: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1359146 This patch fixes the issue by ignoring the QUEUE_FLAG_NO_SG_MERGE flag if the computed bio->bi_phys_segment is bigger than queue_max_segments(q), and the regression is caused by commit 05f1dd53152173(block: add queue flag for disabling SG merging). Reported-by: Kick In <pierre-andre.morey@canonical.com> Tested-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-24block: add support for limiting gaps in SG listsJens Axboe
Another restriction inherited for NVMe - those devices don't support SG lists that have "gaps" in them. Gaps refers to cases where the previous SG entry doesn't end on a page boundary. For NVMe, all SG entries must start at offset 0 (except the first) and end on a page boundary (except the last). Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29block: add queue flag for disabling SG mergingJens Axboe
If devices are not SG starved, we waste a lot of time potentially collapsing SG segments. Enough that 1.5% of the CPU time goes to this, at only 400K IOPS. Add a queue flag, QUEUE_FLAG_NO_SG_MERGE, which just returns the number of vectors in a bio instead of looping over all segments and checking for collapsible ones. Add a BLK_MQ_F_SG_MERGE flag so that drivers can opt-in on the sg merging, if they so desire. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-07block: Explicitly handle discard/write same segmentsKent Overstreet
Immutable biovecs changed the way biovecs are interpreted - drivers no longer use bi_vcnt, they have to go by bi_iter.bi_size (to allow for using part of an existing segment without modifying it). This breaks with discards and write_same bios, since for those bi_size has nothing to do with segments in the biovec. So for now, we need a fairly gross hack - we fortunately know that there will never be more than one segment for the entire request, so we can special case discard/write_same. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2013-12-03block: Really silence spurious compiler warningsKent Overstreet
The uninitialized_var() macro appears to not work on structs... Get rid of it, and manually initialize instead. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-26block: Silence spurious compiler warningsKent Overstreet
Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-23block: Kill bio_iovec_idx(), __bio_iovec()Kent Overstreet
bio_iovec_idx() and __bio_iovec() don't have any valid uses anymore - previous users have been converted to bio_iovec_iter() or other methods. __BVEC_END() has to go too - the bvec array can't be used directly for the last biovec because we might only be using the first portion of it, we have to iterate over the bvec array with bio_for_each_segment() which checks against the current value of bi_iter.bi_size. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk>
2013-11-23block: Convert bio_for_each_segment() to bvec_iterKent Overstreet
More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>