summaryrefslogtreecommitdiff
path: root/block/blk-mq-debugfs.c
AgeCommit message (Collapse)Author
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-03blk-mq: Use pointers for blk_mq_tags bitmap tagsJohn Garry
Introduce pointers for the blk_mq_tags regular and reserved bitmap tags, with the goal of later being able to use a common shared tag bitmap across all HW contexts in a set. Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used Tested-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-03blk-mq: Rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHAREDMing Lei
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request queues, all of which should belong to LUNs attached to same HBA. So rename it to make the point explicitly. [jpg: rebase a few times, add rnbd-clt.c change] Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-07-01blk-mq: remove pointless call of list_entry_rq() in hctx_show_busy_rq()Hou Tao
Just use rq directly, the usage of list_entry_rq() doesn't make any sense. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flagsHou Tao
Else there may be magic numbers in /sys/kernel/debug/block/*/state. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24block: create the request_queue debugfs_dir on registrationLuis Chamberlain
We were only creating the request_queue debugfs_dir only for make_request block drivers (multiqueue), but never for request-based block drivers. We did this as we were only creating non-blktrace additional debugfs files on that directory for make_request drivers. However, since blktrace *always* creates that directory anyway, we special-case the use of that directory on blktrace. Other than this being an eye-sore, this exposes request-based block drivers to the same debugfs fragile race that used to exist with make_request block drivers where if we start adding files onto that directory we can later run a race with a double removal of dentries on the directory if we don't deal with this carefully on blktrace. Instead, just simplify things by always creating the request_queue debugfs_dir on request_queue registration. Rename the mutex also to reflect the fact that this is used outside of the blktrace context. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: drain I/O when all CPUs in a hctx are offlineMing Lei
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22block: remove RQF_COPY_USERChristoph Hellwig
The RQF_COPY_USER is set for bio where the passthrough request mapping helpers decided that bounce buffering is required. It is then used to pad scatterlist for drivers that required it. But given that non-passthrough requests are per definition aligned, and directly mapped pass-through request must be aligned it is not actually required at all. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-09Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "This is the main block updates for 5.3. Nothing earth shattering or major in here, just fixes, additions, and improvements all over the map. This contains: - Series of documentation fixes (Bart) - Optimization of the blk-mq ctx get/put (Bart) - null_blk removal race condition fix (Bob) - req/bio_op() cleanups (Chaitanya) - Series cleaning up the segment accounting, and request/bio mapping (Christoph) - Series cleaning up the page getting/putting for bios (Christoph) - block cgroup cleanups and moving it to where it is used (Christoph) - block cgroup fixes (Tejun) - Series of fixes and improvements to bcache, most notably a write deadlock fix (Coly) - blk-iolatency STS_AGAIN and accounting fixes (Dennis) - Series of improvements and fixes to BFQ (Douglas, Paolo) - debugfs_create() return value check removal for drbd (Greg) - Use struct_size(), where appropriate (Gustavo) - Two lighnvm fixes (Heiner, Geert) - MD fixes, including a read balance and corruption fix (Guoqing, Marcos, Xiao, Yufen) - block opal shadow mbr additions (Jonas, Revanth) - sbitmap compare-and-exhange improvemnts (Pavel) - Fix for potential bio->bi_size overflow (Ming) - NVMe pull requests: - improved PCIe suspent support (Keith Busch) - error injection support for the admin queue (Akinobu Mita) - Fibre Channel discovery improvements (James Smart) - tracing improvements including nvmetc tracing support (Minwoo Im) - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya Kulkarni)" - Various little fixes and improvements to drivers and core" * tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits) blk-iolatency: fix STS_AGAIN handling block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES blk-mq: simplify blk_mq_make_request() blk-mq: remove blk_mq_put_ctx() sbitmap: Replace cmpxchg with xchg block: fix .bi_size overflow block: sed-opal: check size of shadow mbr block: sed-opal: ioctl for writing to shadow mbr block: sed-opal: add ioctl for done-mark of shadow mbr block: never take page references for ITER_BVEC direct-io: use bio_release_pages in dio_bio_complete block_dev: use bio_release_pages in bio_unmap_user block_dev: use bio_release_pages in blkdev_bio_end_io iomap: use bio_release_pages in iomap_dio_bio_end_io block: use bio_release_pages in bio_map_user_iov block: use bio_release_pages in bio_unmap_user block: optionally mark pages dirty in bio_release_pages block: move the BIO_NO_PAGE_REF check into bio_release_pages block: skd_main.c: Remove call to memset after dma_alloc_coherent block: mtip32xx: Remove call to memset after dma_alloc_coherent ...
2019-07-06blk-mq: fix up placement of debugfs directory of queue filesGreg Kroah-Hartman
When the blk-mq debugfs file creation logic was "cleaned up" it was cleaned up too much, causing the queue file to not be created in the correct location. Turns out the check for the directory being present is needed as if that has not happened yet, the files should not be created, and the function will be called later on in the initialization code so that the files can be created in the correct location. Fixes: 6cfc0081b046 ("blk-mq: no need to check return value of debugfs_create functions") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: use blk_op_str() in blk-mq-debugfs.cChaitanya Kulkarni
Now that we've a helper function blk_op_str() to convert the REQ_OP_XXX to string XXX, adjust the code to use that. Get rid of the duplicate array op_name which is now present in the blk-core.c which we renamed it to "blk_op_name" and open coding in the blk-mq-debugfs.c. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: code cleanup queue_poll_stat_show()Chaitanya Kulkarni
This is a pure code cleanup patch and doesn't change any functionality. Having multiple coding styles in the code creates confusion when someone tries to add a new code. Make queue_poll_stat_show() consistent by adding spaces around binary operators with the rest of the code. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: use right format specifier for opChaitanya Kulkarni
In function __blk_mq_debugfs_rq_show variable op has unsigned int type. Since op can never be negative use %u format specifier to match the variable type. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: get rid of redundant elseChaitanya Kulkarni
This is a pure code cleanup patch and doesn't change any functionality. This removes the redundant else in the code which is not needed since we are returning from function anyway. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-17block: use req_op() to maintain consistencyChaitanya Kulkarni
This is a pure code cleanup patch and doesn't change any functionality. In block layer to identify the request operation req_op() macro is used, so change the open coding the req_op() in the blk-mq-debugfs.c. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15blk-mq/debugfs: Fix improper print qualifierPavel Begunkov
struct blk_rq_stat::mean is a u64 value, so use %llu Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13blk-mq: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. When all of these checks are cleaned up, lots of the functions used in the blk-mq-debugfs code can now return void, as no need to check the return value of them either. Overall, this ends up cleaning up the code and making it smaller, always a nice win. Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: switch all files cleared marked as GPLv2 to SPDX tagsChristoph Hellwig
All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-15Merge tag 'v5.0-rc6' into for-5.1/blockJens Axboe
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c. This is needed since io_uring is now based on the block branch, to avoid a conflict between the multi-page bvecs and the bits of io_uring that touch the core block parts. * tag 'v5.0-rc6': (525 commits) Linux 5.0-rc6 x86/mm: Make set_pmd_at() paravirt aware MAINTAINERS: Update the ocores i2c bus driver maintainer, etc blk-mq: remove duplicated definition of blk_mq_freeze_queue Blk-iolatency: warn on negative inflight IO counter blk-iolatency: fix IO hang due to negative inflight counter MAINTAINERS: unify reference to xen-devel list x86/mm/cpa: Fix set_mce_nospec() futex: Handle early deadlock return correctly futex: Fix barrier comment net: dsa: b53: Fix for failure when irq is not defined in dt blktrace: Show requests without sector mips: cm: reprime error cause mips: loongson64: remove unreachable(), fix loongson_poweroff(). sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) signal: Better detection of synchronous signals ...
2019-02-15block: kill BLK_MQ_F_SG_MERGEMing Lei
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: kill QUEUE_FLAG_NO_SG_MERGEMing Lei
Since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting"), physical segment number is mainly figured out in blk_queue_split() for fast path, and the flag of BIO_SEG_VALID is set there too. Now only blk_recount_segments() and blk_recalc_rq_segments() use this flag. Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID is set in blk_queue_split(). For another user of blk_recalc_rq_segments(): - run in partial completion branch of blk_update_request, which is an unusual case - run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed since dm-rq is the only user. Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the current setup of the I/O path, as it isn't going to save you a significant amount of cycles. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09block: kill QUEUE_FLAG_FLUSH_NQJens Axboe
We have various helpers for setting/clearing this flag, and also a helper to check if the queue supports queueable flushes or not. But nobody uses them anymore, kill it with fire. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08Merge tag 'driver-core-5.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core fixes for 5.0-rc6. Well, not so much "driver core" as "debugfs". There's a lot of outstanding debugfs cleanup patches coming in through different subsystem trees, and in that process the debugfs core was found that it really should return errors when something bad happens, to prevent random files from showing up in the root of debugfs afterward. So debugfs was fixed up to handle this properly, and then two fixes for the relay and blk-mq code was needed as it was making invalid assumptions about debugfs return values. There's also a cacheinfo fix in here that resolves a tiny issue. All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: blk-mq: protect debugfs_create_files() from failures relay: check return of create_buf_file() properly debugfs: debugfs_lookup() should return NULL if not found debugfs: return error values, not NULL debugfs: fix debugfs_rename parameter checking cacheinfo: Keep the old value if of_property_read_u32 fails
2019-02-05scsi: block: remove bidi supportChristoph Hellwig
Unused now, and another field in struct request bites the dust. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-31blk-mq: protect debugfs_create_files() from failuresGreg Kroah-Hartman
If debugfs were to return a non-NULL error for a debugfs call, using that pointer later in debugfs_create_files() would crash. Fix that by properly checking the pointer before referencing it. Reported-by: Michal Hocko <mhocko@kernel.org> Reported-and-tested-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-24blk-mq: fix the cmd_flag_name arrayJianchao Wang
Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI. Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17blk-mq: fix dispatch from sw queueMing Lei
When a request is added to rq list of sw queue(ctx), the rq may be from a different type of hctx, especially after multi queue mapping is introduced. So when dispach request from sw queue via blk_mq_flush_busy_ctxs() or blk_mq_dequeue_from_ctx(), one request belonging to other queue type of hctx can be dispatched to current hctx in case that read queue or poll queue is enabled. This patch fixes this issue by introducing per-queue-type list. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Changed by me to not use separately cacheline aligned lists, just place them all in the same cacheline where we had just the one list and lock before. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17blk-mq: export hctx->type in debugfs instead of sysfsMing Lei
Now we only export hctx->type via sysfs, and there isn't such info in hctx entry under debugfs. We often use debugfs only to diagnose queue mapping issue, so add the support in debugfs. Queue mapping becomes a bit more complicated after multiple queue mapping is supported, we may write blktest to verify if queue mapping is valid based on blk-mq-debugfs. Given not necessary to export hctx->type twice, so remove the export from sysfs. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16blk-mq-debugfs: support rq_qosMing Lei
blk-mq-debugfs has been proved as very helpful for debug some tough issues, such as IO hang. We have seen blk-wbt related IO hang several times, even inside Red Hat BZ, there is such report not sovled yet, so this patch adds support debugfs on rq_qos. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove QUEUE_FLAG_BYPASS and ->bypassChristoph Hellwig
Unused since the removal of the legacy request code. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08blk-mq-tag: change busy_iter_fn to return whether to continue or notJens Axboe
We have this functionality in sbitmap, but we don't export it in blk-mq for users of the tags busy iteration. This can be useful for stopping the iteration, if the caller doesn't need to find more requests. Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-mq: cache request hardware queue mappingJens Axboe
We call blk_mq_map_queue() a lot, at least two times for each request per IO, sometimes more. Since we now have an indirect call as well in that function. cache the mapping so we don't have to re-call blk_mq_map_queue() for the same request multiple times. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-mq: pass in request/bio flags to queue mappingJens Axboe
Prep patch for being able to place request based not just on CPU location, but also on the type of request. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove legacy rq taggingJens Axboe
It's now unused, kill it. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: add a report_zones methodChristoph Hellwig
Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-05blk-mq-debugfs: Also show requests that have not yet been startedBart Van Assche
When debugging e.g. the SCSI timeout handler it is important that requests that have not yet been started or that already have completed are also reported through debugfs. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26block, scsi: Change the preempt-only flag into a counterBart Van Assche
The RQF_PREEMPT flag is used for three purposes: - In the SCSI core, for making sure that power management requests are executed even if a device is in the "quiesced" state. - For domain validation by SCSI drivers that use the parallel port. - In the IDE driver, for IDE preempt requests. Rename "preempt-only" into "pm-only" because the primary purpose of this mode is power management. Since the power management core may but does not have to resume a runtime suspended device before performing system-wide suspend and since a later patch will set "pm-only" mode as long as a block device is runtime suspended, make it possible to set "pm-only" mode from more than one context. Since with this change scsi_device_quiesce() is no longer idempotent, make that function return early if it is called for a quiesced queue. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09blk-mq: dequeue request one by one from sw queue if hctx is busyMing Lei
It won't be efficient to dequeue request one by one from sw queue, but we have to do that when queue is busy for better merge performance. This patch takes the Exponential Weighted Moving Average(EWMA) to figure out if queue is busy, then only dequeue request one by one from sw queue when queue is busy. Fixes: b347689ffbca ("blk-mq-sched: improve dispatching from sw queue") Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reported-by: Kashyap Desai <kashyap.desai@broadcom.com> Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=nBart Van Assche
Exclude zoned block device members from struct request_queue for CONFIG_BLK_DEV_ZONED == n. Avoid breaking the build by only building the code that uses these struct request_queue members if CONFIG_BLK_DEV_ZONED != n. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block: Inline blk_queue_nr_zones()Bart Van Assche
Since the implementation of blk_queue_nr_zones() is trivial and since it only has a single caller, inline this function. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20blk-mq-debugfs: Off by one in blk_mq_rq_state_name()Dan Carpenter
If rq_state == ARRAY_SIZE() then we read one element beyond the end of the blk_mq_rq_state_name_array[] array. Fixes: ec6dcf63c55c ("blk-mq-debugfs: Show more request state information") Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29blk-mq: Remove generation seqeunceKeith Busch
This patch simplifies the timeout handling by relying on the request reference counting to ensure the iterator is operating on an inflight and truly timed out request. Since the reference counting prevents the tag from being reallocated, the block layer no longer needs to prevent drivers from completing their requests while the timeout handler is operating on it: a driver completing a request is allowed to proceed to the next state without additional syncronization with the block layer. This also removes any need for generation sequence numbers since the request lifetime is prevented from being reallocated as a new sequence while timeout handling is operating on it. To enables this a refcount is added to struct request so that request users can be sure they're operating on the same request without it changing while they're processing it. The request's tag won't be released for reuse until both the timeout handler and the completion are done with it. Signed-off-by: Keith Busch <keith.busch@intel.com> [hch: slight cleanups, added back submission side hctx lock, use cmpxchg for completions] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-10blk-mq: remove blk_mq_delay_queue()Ming Lei
No driver uses this interface any more, so remove it. Cc: Stefan Haberland <sth@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-17blk-mq-debugfs: Show more request state informationBart Van Assche
Since commit 634f9e4631a8 ("blk-mq: remove REQ_ATOM_COMPLETE usages from blk-mq") blk_rq_is_complete() only reports whether or not a request has completed for legacy queues. Hence modify the blk-mq-debugfs code such that it shows the blk-mq request state again. Fixes: 634f9e4631a8 ("blk-mq: remove REQ_ATOM_COMPLETE usages from blk-mq") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-28blk-mq-debugfs: Show zone locking informationBart Van Assche
When debugging the ZBC code in the mq-deadline scheduler it is very important to know which zones are locked and which zones are not locked. Hence this patch that exports the zone locking information through debugfs. Cc: Omar Sandoval <osandov@fb.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-28blk-mq-debugfs: Reorder queue show and store methodsBart Van Assche
Make sure that the queue show and store methods are contiguous and also that these appear in alphabetical order. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-24blk-mq-debugfs: don't allow write on attributes with seq_operations setEryu Guan
Attributes that only implement .seq_ops are read-only, any write to them should be rejected. But currently kernel would crash when writing to such debugfs entries, e.g. chmod +w /sys/kernel/debug/block/<dev>/requeue_list echo 0 > /sys/kernel/debug/block/<dev>/requeue_list chmod -w /sys/kernel/debug/block/<dev>/requeue_list Fix it by returning -EPERM in blk_mq_debugfs_write() when writing to such attributes. Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-12blk-mq: add missing RQF_STARTED to debugfsJens Axboe
Looking at debug output, we see: ./000000009ddfa913/requeue_list:000000009646711c {.op=READ, .state=idle, gen=0x1 18, abort_gen=0x0, .cmd_flags=, .rq_flags=SORTED|1|SOFTBARRIER|IO_STAT, complete =0, .tag=-1, .internal_tag=217} Note the '1' between SORTED and SOFTBARRIER - that's because no name as defined for RQF_STARTED. Fixed that. Signed-off-by: Jens Axboe <axboe@kernel.dk>