summaryrefslogtreecommitdiff
path: root/block/blk-settings.c
AgeCommit message (Collapse)Author
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-12-12mm: don't cap request size based on read-ahead settingJens Axboe
We ran into a funky issue, where someone doing 256K buffered reads saw 128K requests at the device level. Turns out it is read-ahead capping the request size, since we use 128K as the default setting. This doesn't make a lot of sense - if someone is issuing 256K reads, they should see 256K reads, regardless of the read-ahead setting, if the underlying device can support a 256K read in a single command. This patch introduces a bdi hint, io_pages. This is the soft max IO size for the lower level, I've hooked it up to the bdev settings here. Read-ahead is modified to issue the maximum of the user request size, and the read-ahead max size, but capped to the max request size on the device side. The latter is done to avoid reading ahead too much, if the application asks for a huge read. With this patch, the kernel behaves like the application expects. Link: http://lkml.kernel.org/r/1479498073-8657-1-git-send-email-axboe@fb.com Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10block: hook up writeback throttlingJens Axboe
Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-05block: add code to track actual device queue depthJens Axboe
For blk-mq, ->nr_requests does track queue depth, at least at init time. But for the older queue paths, it's simply a soft setting. On top of that, it's generally larger than the hardware setting on purpose, to allow backup of requests for merging. Fill a hole in struct request with a 'queue_depth' member, that drivers can call to more closely inform the block layer of the real queue depth. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Jan Kara <jack@suse.cz>
2016-10-18block: update chunk_sectors in blk_stack_limits()Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18block: Add 'zoned' queue limitDamien Le Moal
Add the zoned queue limit to indicate the zoning model of a block device. Defined values are 0 (BLK_ZONED_NONE) for regular block devices, 1 (BLK_ZONED_HA) for host-aware zone block devices and 2 (BLK_ZONED_HM) for host-managed zone block devices. The standards defined drive managed model is not defined here since these block devices do not provide any command for accessing zone information. Drive managed model devices will be reported as BLK_ZONED_NONE. The helper functions blk_queue_zoned_model and bdev_zoned_model return the zoned limit and the functions blk_queue_is_zoned and bdev_is_zoned return a boolean for callers to test if a block device is zoned. The zoned attribute is also exported as a string to applications via sysfs. BLK_ZONED_NONE shows as "none", BLK_ZONED_HA as "host-aware" and BLK_ZONED_HM as "host-managed". Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13block: kill off q->flush_flagsJens Axboe
Now that we converted everything to the newer block write cache interface, kill off the queue flush_flags and queueable flush entries. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: kill blk_queue_flush()Jens Axboe
We don't have any drivers left using it, so kill it off. Update documentation to use the newer blk_queue_write_cache(). Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12block: add ability to flag write back caching on a deviceJens Axboe
Add an internal helper and flag for setting whether a queue has write back caching, or write through (or none). Add a sysfs file to show this as well, and make it changeable from user space. This will replace the (awkward) blk_queue_flush() interface that drivers currently use to inform the block layer of write cache state and capabilities. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-11block: Initialize max_dev_sectors to 0Keith Busch
The new queue limit is not used by the majority of block drivers, and should be initialized to 0 for the driver's requested settings to be used. Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25block/sd: Fix device-imposed transfer length limitsMartin K. Petersen
Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-09-02Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "This first core part of the block IO changes contains: - Cleanup of the bio IO error signaling from Christoph. We used to rely on the uptodate bit and passing around of an error, now we store the error in the bio itself. - Improvement of the above from myself, by shrinking the bio size down again to fit in two cachelines on x86-64. - Revert of the max_hw_sectors cap removal from a revision again, from Jeff Moyer. This caused performance regressions in various tests. Reinstate the limit, bump it to a more reasonable size instead. - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me. Most devices have huge trim limits, which can cause nasty latencies when deleting files. Enable the admin to configure the size down. We will look into having a more sane default instead of UINT_MAX sectors. - Improvement of the SGP gaps logic from Keith Busch. - Enable the block core to handle arbitrarily sized bios, which enables a nice simplification of bio_add_page() (which is an IO hot path). From Kent. - Improvements to the partition io stats accounting, making it faster. From Ming Lei. - Also from Ming Lei, a basic fixup for overflow of the sysfs pending file in blk-mq, as well as a fix for a blk-mq timeout race condition. - Ming Lin has been carrying Kents above mentioned patches forward for a while, and testing them. Ming also did a few fixes around that. - Sasha Levin found and fixed a use-after-free problem introduced by the bio->bi_error changes from Christoph. - Small blk cgroup cleanup from Viresh Kumar" * 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits) blk: Fix bio_io_vec index when checking bvec gaps block: Replace SG_GAPS with new queue limits mask block: bump BLK_DEF_MAX_SECTORS to 2560 Revert "block: remove artifical max_hw_sectors cap" blk-mq: fix race between timeout and freeing request blk-mq: fix buffer overflow when reading sysfs file of 'pending' Documentation: update notes in biovecs about arbitrarily sized bios block: remove bio_get_nr_vecs() fs: use helper bio_add_page() instead of open coding on bi_io_vec block: kill merge_bvec_fn() completely md/raid5: get rid of bio_fits_rdev() md/raid5: split bio for chunk_aligned_read block: remove split code in blkdev_issue_{discard,write_same} btrfs: remove bio splitting and merge_bvec_fn() calls bcache: remove driver private bio splitting code block: simplify bio_add_page() block: make generic_make_request handle arbitrarily sized bios blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL) block: don't access bio->bi_error after bio_put() block: shrink struct bio down to 2 cache lines again ...
2015-08-19block: Replace SG_GAPS with new queue limits maskKeith Busch
The SG_GAPS queue flag caused checks for bio vector alignment against PAGE_SIZE, but the device may have different constraints. This patch adds a queue limits so a driver with such constraints can set to allow requests that would have been unnecessarily split. The new gaps check takes the request_queue as a parameter to simplify the logic around invoking this function. This new limit makes the queue flag redundant, so removing it and all usage. Device-mappers will inherit the correct settings through blk_stack_limits(). Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18Revert "block: remove artifical max_hw_sectors cap"Jeff Moyer
This reverts commit 34b48db66e08ca1c1bc07cf305d672ac940268dc. That commit caused performance regressions for streaming I/O workloads on a number of different storage devices, from SATA disks to external RAID arrays. It also managed to trip up some buggy firmware in at least one drive, causing data corruption. The next patch will bump the default max_sectors_kb value to 1280, which will accommodate a 10-data-disk stripe write with chunk size 128k. In the testing I've done using iozone, fio, and aio-stress, a value of 1280 does not show a big performance difference from 512. This will hopefully still help the software RAID setup that Christoph saw the original performance gains with while still not regressing other storage configurations. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: kill merge_bvec_fn() completelyKent Overstreet
As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-12sd: Fix maximum I/O size for BLOCK_PC requestsMartin K. Petersen
Commit bcdb247c6b6a ("sd: Limit transfer length") clamped the maximum size of an I/O request to the MAXIMUM TRANSFER LENGTH field in the BLOCK LIMITS VPD. This had the unfortunate effect of also limiting the maximum size of non-filesystem requests sent to the device through sg/bsg. Avoid using blk_queue_max_hw_sectors() and set the max_sectors queue limit directly. Also update the comment in blk_limits_max_hw_sectors() to clarify that max_hw_sectors defines the limit for the I/O controller only. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Brian King <brking@linux.vnet.ibm.com> Tested-by: Brian King <brking@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-07-17block: make /sys/block/<dev>/queue/discard_max_bytes writeableJens Axboe
Lots of devices support huge discard sizes these days. Depending on how the device handles them internally, huge discards can introduce massive latencies (hundreds of msec) on the device side. We have a sysfs file, discard_max_bytes, that advertises the max hardware supported discard size. Make this writeable, and split the settings into a soft and hard limit. This can be set from 'discard_granularity' and up to the hardware limit. Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw set limit. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-31block: fix blk_stack_limits() regression due to lcm() changeMike Snitzer
Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n") caused blk_stack_limits() to not properly stack queue_limits for stacked devices (e.g. DM). Fix this regression by establishing lcm_not_zero() and switching blk_stack_limits() over to using it. DM uses blk_set_stacking_limits() to establish the initial top-level queue_limits that are then built up based on underlying devices' limits using blk_stack_limits(). In the case of optimal_io_size (io_opt) blk_set_stacking_limits() establishes a default value of 0. With commit 69c953c, lcm(0, n) is no longer n, which compromises proper stacking of the underlying devices' io_opt. Test: $ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536 $ cat /sys/block/sde/queue/optimal_io_size 786432 $ dmsetup create node --table "0 100 linear /dev/sde 0" Before this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 0 After this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 786432 Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.19+ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-21block: remove artifical max_hw_sectors capChristoph Hellwig
Set max_sectors to the value the drivers provides as hardware limit by default. Linux had proper I/O throttling for a long time and doesn't rely on a artifically small maximum I/O size anymore. By not limiting the I/O size by default we remove an annoying tuning step required for most Linux installation. Note that both the user, and if absolutely required the driver can still impose a limit for FS requests below max_hw_sectors_kb. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-09block: fix alignment_offset math that assumes io_min is a power-of-2Mike Snitzer
The math in both blk_stack_limits() and queue_limit_alignment_offset() assume that a block device's io_min (aka minimum_io_size) is always a power-of-2. Fix the math such that it works for non-power-of-2 io_min. This issue (of alignment_offset != 0) became apparent when testing dm-thinp with a thinp blocksize that matches a RAID6 stripesize of 1280K. Commit fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data block size") unlocked the potential for alignment_offset != 0 due to the dm-thin-pool's io_min possibly being a non-power-of-2. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-10block: ensure that bio_add_page() always accepts a page for an empty bioJens Axboe
With commit 762380ad9322 added support for chunk sizes and no merging across them, it broke the rule of always allowing adding of a single page to an empty bio. So relax the restriction a bit to allow for that, similarly to what we have always done. This fixes a crash with mkfs.xfs and 512b sector sizes on NVMe. Reported-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-05block: add notion of a chunk size for request mergingJens Axboe
Some drivers have different limits on what size a request should optimally be, depending on the offset of the request. Similar to dividing a device into chunks. Add a setting that allows the driver to inform the block layer of such a chunk size. The block layer will then prevent merging across the chunks. This is needed to optimally support NVMe with a non-zero stripe size. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-01-08bcache/md: Use raid stripe sizeKent Overstreet
Now that we've got code for raid5/6 stripe awareness, bcache just needs to know about the stripes and when writing partial stripes is expensive - we probably don't want to enable this optimization for raid1 or 10, even though they have stripes. So add a flag to queue_limits. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2013-11-14Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
2013-11-08block: properly stack underlying max_segment_size to DM deviceMike Snitzer
Without this patch all DM devices will default to BLK_MAX_SEGMENT_SIZE (65536) even if the underlying device(s) have a larger value -- this is due to blk_stack_limits() using min_not_zero() when stacking the max_segment_size limit. 1073741824 before patch: 65536 after patch: 1073741824 Reported-by: Lukasz Flis <l.flis@cyfronet.pl> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-31ARM: 7794/1: block: Rename parameter dma_mask to max_addr for ↵Santosh Shilimkar
blk_queue_bounce_limit() The blk_queue_bounce_limit() API parameter 'dma_mask' is actually the maximum address the device can handle rather than a dma_mask. Rename it accordingly to avoid it being interpreted as dma_mask. No functional change. The idea is to fix the bad assumptions about dma_mask wherever it could be miss-interpreted. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-14block: discard granularity might not be power of 2Shaohua Li
In MD raid case, discard granularity might not be power of 2, for example, a 4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for such cases. Reported-by: Neil Brown <neilb@suse.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20block: Implement support for WRITE SAMEMartin K. Petersen
The WRITE SAME command supported on some SCSI devices allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O. This patch implements support for WRITE SAME in the block layer. The blkdev_issue_write_same() function can be used by filesystems and block drivers to replicate a buffer across a block range. This can be used to efficiently initialize software RAID devices, etc. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-01block: do not artificially constrain max_sectors for stacking driversMike Snitzer
blk_set_stacking_limits is intended to allow stacking drivers to build up the limits of the stacked device based on the underlying devices' limits. But defaulting 'max_sectors' to BLK_DEF_MAX_SECTORS (1024) doesn't allow the stacking driver to inherit a max_sectors larger than 1024 -- due to blk_stack_limits' use of min_not_zero. It is now clear that this artificial limit is getting in the way so change blk_set_stacking_limits's max_sectors to UINT_MAX (which allows stacking drivers like dm-multipath to inherit 'max_sectors' from the underlying paths). Reported-by: Vijay Chauhan <vijay.chauhan@netapp.com> Tested-by: Vijay Chauhan <vijay.chauhan@netapp.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-11block: Introduce blk_set_stacking_limits functionMartin K. Petersen
Stacking driver queue limits are typically bounded exclusively by the capabilities of the low level devices, not by the stacking driver itself. This patch introduces blk_set_stacking_limits() which has more liberal metrics than the default queue limits function. This allows us to inherit topology parameters from bottom devices without manually tweaking the default limits in each driver prior to calling the stacking function. Since there is now a clear distinction between stacking and low-level devices, blk_set_default_limits() has been modified to carry the more conservative values that we used to manually set in blk_queue_make_request(). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-05-18block: Fix discard topology stacking and reportingMartin K. Petersen
In some cases we would end up stacking discard_zeroes_data incorrectly. Fix this by enabling the feature by default for stacking drivers and clearing it for low-level drivers. Incorporating a device that does not support dzd will then cause the feature to be disabled in the stacking driver. Also ensure that the maximum discard value does not overflow when exported in sysfs and return 0 in the alignment and dzd fields for devices that don't support discard. Reported-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06block: add a non-queueable flush flagshaohua.li@intel.com
flush request isn't queueable in some drives. Add a flag to let driver notify block layer about this. We can optimize flush performance with the knowledge. Stable: 2.6.39 only Cc: stable@kernel.org Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18Revert "block: add callback function for unplug notification"Jens Axboe
MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f75664570d8b75469cc468f23c2b27220984983b. Conflicts: block/blk-core.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12block: add callback function for unplug notificationJens Axboe
MD would like to know when a queue is unplugged, so it can flush it's bitmap writes. Add such a callback. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe
Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02block: Initialize ->queue_lock to internal lock at queue allocation timeVivek Goyal
There does not seem to be a clear convention whether q->queue_lock is initialized or not when blk_cleanup_queue() is called. In the past it was not necessary but now blk_throtl_exit() takes up queue lock by default and needs queue lock to be available. In fact elevator_exit() code also has similar requirement just that it is less stringent in the sense that elevator_exit() is called only if elevator is initialized. Two problems have been noticed because of ambiguity about spin lock status. - If a driver calls blk_alloc_queue() and then soon calls blk_cleanup_queue() almost immediately, (because some other driver structure allocation failed or some other error happened) then blk_throtl_exit() will run into issues as queue lock is not initialized. Loop driver ran into this issue recently and I noticed error paths in md driver too. Similar error paths should exist in other drivers too. - If some driver provided external spin lock and zapped the lock before blk_cleanup_queue(), then it can lead to issues. So this patch initializes the default queue lock at queue allocation time. block throttling code is one of the users of queue lock and it is initialized at the queue allocation time, so it makes sense to initialize ->queue_lock also to internal lock. A driver can overide that lock later. This will take care of the issue where a driver does not have to worry about initializing the queue lock to default before calling blk_cleanup_queue() Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17block: max hardware sectors limit wrapperMike Snitzer
Implement blk_limits_max_hw_sectors() and make blk_queue_max_hw_sectors() a wrapper around it. DM needs this to avoid setting queue_limits' max_hw_sectors and max_sectors directly. dm_set_device_limits() now leverages blk_limits_max_hw_sectors() logic to establish the appropriate max_hw_sectors minimum (PAGE_SIZE). Fixes issue where DM was incorrectly setting max_sectors rather than max_hw_sectors (which caused dm_merge_bvec()'s max_hw_sectors check to be ineffective). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits insteadMartin K. Petersen
When stacking devices, a request_queue is not always available. This forced us to have a no_cluster flag in the queue_limits that could be used as a carrier until the request_queue had been set up for a metadevice. There were several problems with that approach. First of all it was up to the stacking device to remember to set queue flag after stacking had completed. Also, the queue flag and the queue limits had to be kept in sync at all times. We got that wrong, which could lead to us issuing commands that went beyond the max scatterlist limit set by the driver. The proper fix is to avoid having two flags for tracking the same thing. We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the block layer merging functions. The queue_limit 'no_cluster' is turned into 'cluster' to avoid double negatives and to ease stacking. Clustering defaults to being enabled as before. The queue flag logic is removed from the stacking function, and explicitly setting the cluster flag is no longer necessary in DM and MD. Reported-by: Ed Lin <ed.lin@promise.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-22Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits) xen-blkfront: disable barrier/flush write support Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c block: remove BLKDEV_IFL_WAIT aic7xxx_old: removed unused 'req' variable block: remove the BH_Eopnotsupp flag block: remove the BLKDEV_IFL_BARRIER flag block: remove the WRITE_BARRIER flag swap: do not send discards as barriers fat: do not send discards as barriers ext4: do not send discards as barriers jbd2: replace barriers with explicit flush / FUA usage jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier jbd: replace barriers with explicit flush / FUA usage nilfs2: replace barriers with explicit flush / FUA usage reiserfs: replace barriers with explicit flush / FUA usage gfs2: replace barriers with explicit flush / FUA usage btrfs: replace barriers with explicit flush / FUA usage xfs: replace barriers with explicit flush / FUA usage block: pass gfp_mask and flags to sb_issue_discard dm: convey that all flushes are processed as empty ...
2010-10-13block: Ensure physical block size is unsigned intMartin K. Petersen
Physical block size was declared unsigned int to accomodate the maximum size reported by READ CAPACITY(16). Make sure we use the right type in the related functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01block: set the bounce_pfn to the actual DMA limit rather than to max memoryMalahal Naineni
The bounce_pfn of the request queue in 64 bit systems is set to the current max_low_pfn. Adding more memory later makes this incorrect. Memory allocated beyond this boot time max_low_pfn appear to require bounce buffers (bounce buffers are actually not allocated but used in calculating segments that may result in "over max segments limit" errors). Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01block: revert bad fix for memory hotplug causing bouncesJens Axboe
Revert "block: set the bounce_pfn to the actual DMA limit rather than to max memory" This reverts commit c49825facfd4969585224a896a5e717f88450cad. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-24block: set the bounce_pfn to the actual DMA limit rather than to max memoryMalahal Naineni
The bounce_pfn of the request queue in 64 bit systems is set to the current max_low_pfn. Adding more memory later makes this incorrect. Memory allocated beyond this boot time max_low_pfn appear to require bounce buffers (bounce buffers are actually not allocated but used in calculating segments that may result in "over max segments limit" errors). Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10block/scsi: Provide a limit on the number of integrity segmentsMartin K. Petersen
Some controllers have a hardware limit on the number of protection information scatter-gather list segments they can handle. Introduce a max_integrity_segments limit in the block layer and provide a new scsi_host_template setting that allows HBA drivers to provide a value suitable for the hardware. Add support for honoring the integrity segment limit when merging both bios and requests. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10Consolidate min_not_zeroMartin K. Petersen
We have several users of min_not_zero, each of them using their own definition. Move the define to kernel.h. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()Tejun Heo
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with -EOPNOTSUPP and blk_queue_ordered() is replaced with simpler blk_queue_flush(). blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a device has write cache and can flush it, it should set REQ_FLUSH. If the device can handle FUA writes, it should also set REQ_FUA. All blk_queue_ordered() users are converted. * ORDERED_DRAIN is mapped to 0 which is the default value. * ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH. * ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: implement an unprep function corresponding directly to prepJames Bottomley
Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>