| Age | Commit message (Collapse) | Author |
|---|
|
We have to put the driver tag if dispatch budget can't be got, otherwise
it might cause IO deadlock, especially in case that size of tags is very
small.
Fixes: de1482974080(blk-mq: introduce .get_budget and .put_budget in blk_mq_ops)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the obvious calling convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helper doesn't buy us much over calling kmap_atomic directly.
In fact in the only caller it does a bit of useless work as the
caller already has the bvec at hand, and said caller would even
buggy for a multi-segment bio due to the use of this helper.
So just remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 358a3a6bccb74da9d63a26b2dd5f09f1e9970e0b.
We have cases that aren't covered 100% in the drivers, so for now
we have to retain the shared tag restart loops.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The idea behind it is simple:
1) for none scheduler, driver tag has to be borrowed for flush rq,
otherwise we may run out of tag, and that causes an IO hang. And
get/put driver tag is actually noop for none, so reordering tags
isn't necessary at all.
2) for a real I/O scheduler, we need not allocate a driver tag upfront
for flush rq. It works just fine to follow the same approach as
normal requests: allocate driver tag for each rq just before calling
->queue_rq().
One driver visible change is that the driver tag isn't shared in the
flush request sequence. That won't be a problem, since we always do that
in legacy path.
Then flush rq need not be treated specially wrt. get/put driver tag.
This cleans up the code - for instance, reorder_tags_to_front() can be
removed, and we needn't worry about request ordering in dispatch list
for avoiding I/O deadlock.
Also we have to put the driver tag before requeueing.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need this helper to put the driver tag for flush rq, since we will
not share tag in the flush request sequence in the following patch
in case that I/O scheduler is applied.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of IO scheduler we always pre-allocate one driver tag before
calling blk_insert_flush(), and flush request will be marked as
RQF_FLUSH_SEQ once it is in flush machinery.
So if RQF_FLUSH_SEQ isn't set, we call blk_insert_flush() to handle
the request, otherwise the flush request is dispatched to ->dispatch
list directly.
This is a preparation patch for not preallocating a driver tag for flush
requests, and for not treating flush requests as a special case. This is
similar to what the legacy path does.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the following patch, we will use RQF_FLUSH_SEQ to decide:
1) if the flag isn't set, the flush rq need to be inserted via
blk_insert_flush()
2) otherwise, the flush rq need to be dispatched directly since
it is in flush machinery now.
So we use blk_mq_request_bypass_insert() for requests of bypassing
flush machinery, just like the legacy path did.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block flush need this function without running the queue, so add a
parameter controlling whether we run it or not.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_insert_flush() should only insert request since run queue always
follows it.
In case of bypassing flush, we don't need to run queue because every
blk_insert_flush() follows one run queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When freeing the driver tag of the next rq with an I/O scheduler
configured, we get the first entry of the list. However, this can
race with requeue of a request, and we end up getting the wrong request
from the head of the list. Free the driver tag of next rq before the
failed one is requeued in the failure branch of queue_rq callback.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg policy should keep cpd/pd's alloc_fn and free_fn in pairs,
otherwise policy would register fail.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is enough to just check if we can get the budget via .get_budget().
And we don't need to deal with device state change in .get_budget().
For SCSI, one issue to be fixed is that we have to call
scsi_mq_uninit_cmd() to free allocated ressources if SCSI device fails
to handle the request. And it isn't enough to simply call
blk_mq_end_request() to do that if this request is marked as
RQF_DONTPREP.
Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to look for an active PM request until the next softbarrier
instead of looking for the first non-PM request. Otherwise any cause
of request reordering might starve the PM request(s).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_get_tag() can modify data->ctx. This means that in the
error path of blk_mq_get_request() data->ctx should be passed to
blk_mq_put_ctx() instead of local_ctx. Note: since blk_mq_put_ctx()
ignores its argument, this patch does not change any functionality.
References: commit 1ad43c0078b7 ("blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
if blk-mq use "none" io scheduler, nr_request get a wrong value when
input a number > tag_set->queue_depth. blk_mq_tag_update_depth will get
the smaller one min(nr, set->queue_depth), and then q->nr_request get a
wrong value.
Reproduce:
echo none > /sys/block/nvme0n1/queue/scheduler
echo 1000000 > /sys/block/nvme0n1/queue/nr_requests
cat /sys/block/nvme0n1/queue/nr_requests
1000000
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
That we we can also poll non blk-mq queues. Mostly needed for
the NVMe multipath code, but could also be useful elsewhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With this flag a driver can create a gendisk that can be used for I/O
submission inside the kernel, but which is not registered as user
facing block device. This will be useful for the NVMe multipath
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The hidden gendisks introduced in the next patch need to keep the dev
field in their struct device empty so that udev won't try to create
block device nodes for them. To support that rewrite disk_devt to
look at the major and first_minor fields in the gendisk itself instead
of looking into the struct device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helpers allows to bounce steal the uncompleted bios from a request so
that they can be reissued on another path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helper allows reinserting a bio into a new queue without much
overhead, but requires all queue limits to be the same for the upper
and lower queues, and it does not provide any recursion preventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe changes from Christoph:
"Below are the currently queue nvme updates for Linux 4.15. There are
a few more things that could make it for this merge window, but I'd
like to get things into linux-next, especially for the unlikely case
that Linus decided to cut -rc8.
Highlights:
- support for SGLs in the PCIe driver (Chaitanya Kulkarni)
- disable I/O schedulers for the admin queue (Israel Rukshin)
- various Fibre Channel fixes and enhancements (James Smart)
- various refactoring for better code sharing between transports
(Sagi Grimberg and me)
as well as lots of little bits from various contributors."
|
|
SCSI restarts its queue in scsi_end_request() automatically, so we don't
need to handle this case in blk-mq.
Especailly any request won't be dequeued in this case, we needn't to
worry about IO hang caused by restart vs. dispatch.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now restart is used in the following cases, and TAG_SHARED is for
SCSI only.
1) .get_budget() returns BLK_STS_RESOURCE
- if resource in target/host level isn't satisfied, this SCSI device
will be added in shost->starved_list, and the whole queue will be rerun
(via SCSI's built-in RESTART) in scsi_end_request() after any request
initiated from this host/targe is completed. Forget to mention, host level
resource can't be an issue for blk-mq at all.
- the same is true if resource in the queue level isn't satisfied.
- if there isn't outstanding request on this queue, then SCSI's RESTART
can't work(blk-mq's can't work too), and the queue will be run after
SCSI_QUEUE_DELAY, and finally all starved sdevs will be handled by SCSI's
RESTART when this request is finished
2) scsi_dispatch_cmd() returns BLK_STS_RESOURCE
- if there isn't onprogressing request on this queue, the queue
will be run after SCSI_QUEUE_DELAY
- otherwise, SCSI's RESTART covers the rerun.
3) blk_mq_get_driver_tag() failed
- BLK_MQ_S_TAG_WAITING covers the cross-queue RESTART for driver
allocation.
In one word, SCSI's built-in RESTART is enough to cover the queue
rerun, and we don't need to pay special attention to TAG_SHARED wrt. restart.
In my test on scsi_debug(8 luns), this patch improves IOPS by 20% ~ 30% when
running I/O on these 8 luns concurrently.
Aslo Roman Pen reported the current RESTART is very expensive especialy
when there are lots of LUNs attached in one host, such as in his
test, RESTART causes half of IOPS be cut.
Fixes: https://marc.info/?l=linux-kernel&m=150832216727524&w=2
Fixes: 6d8c6c0f97ad ("blk-mq: Restart a single queue if tag sets are shared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
SCSI devices use host-wide tagset, and the shared driver tag space is
often quite big. However, there is also a queue depth for each lun(
.cmd_per_lun), which is often small, for example, on both lpfc and
qla2xxx, .cmd_per_lun is just 3.
So lots of requests may stay in sw queue, and we always flush all
belonging to same hw queue and dispatch them all to driver.
Unfortunately it is easy to cause queue busy because of the small
.cmd_per_lun. Once these requests are flushed out, they have to stay in
hctx->dispatch, and no bio merge can happen on these requests, and
sequential IO performance is harmed.
This patch introduces blk_mq_dequeue_from_ctx for dequeuing a request
from a sw queue, so that we can dispatch them in scheduler's way. We can
then avoid dequeueing too many requests from sw queue, since we don't
flush ->dispatch completely.
This patch improves dispatching from sw queue by using the .get_budget
and .put_budget callbacks.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For SCSI devices, there is often a per-request-queue depth, which needs
to be respected before queuing one request.
Currently blk-mq always dequeues the request first, then calls
.queue_rq() to dispatch the request to lld. One obvious issue with this
approach is that I/O merging may not be successful, because when the
per-request-queue depth can't be respected, .queue_rq() has to return
BLK_STS_RESOURCE, and then this request has to stay in hctx->dispatch
list. This means it never gets a chance to be merged with other IO.
This patch introduces .get_budget and .put_budget callback in blk_mq_ops,
then we can try to get reserved budget first before dequeuing request.
If the budget for queueing I/O can't be satisfied, we don't need to
dequeue request at all. Hence the request can be left in the IO
scheduler queue, for more merging opportunities.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There may be request in sw queue, and not fetched to domain queue
yet, so check it in kyber_has_work().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So that it becomes easy to support to dispatch from sw queue in the
following patch.
No functional change.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Suggested-by: Christoph Hellwig <hch@lst.de> # for simplifying dispatch logic
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the hw queue is busy, we shouldn't take requests from the scheduler
queue any more, otherwise it is difficult to do IO merge.
This patch fixes the awful IO performance on some SCSI devices(lpfc,
qla2xxx, ...) when mq-deadline/kyber is used by not taking requests if
hw queue is busy.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that if the timeout timer fires after a queue has been
marked "dying" that the affected requests are finished.
Reported-by: chenxiang (M) <chenxiang66@hisilicon.com>
Fixes: commit 287922eb0b18 ("block: defer timeouts to a workqueue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: chenxiang (M) <chenxiang66@hisilicon.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The scheduler framework now supports looking up the appropriate
scheduler with the {name,mq} tupple. We can register mq-deadline
with the alias of 'deadline', so that switching to 'deadline'
will do the right thing based on the type of driver attached to
it.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since we now lookup elevator types with the appropriate multiqueue
capability, allow schedulers to register with an alias alongside
the real name. This is in preparation for allowing 'mq-deadline'
to register an alias of 'deadline' as well.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an IO scheduler is selected via elevator= and it doesn't match
the driver in question wrt blk-mq support, then we fail to boot.
The elevator= parameter is deprecated and only supported for
non-mq devices. Augment the elevator lookup API so that we
pass in if we're looking for an mq capable scheduler or not,
so that we only ever return a valid type for the queue in
question.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to
permit trying WRITE SAME on older SCSI devices, unless ->no_write_same
is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE
SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO:
$ fallocate -zn -l 1k /dev/sdg
fallocate: fallocate failed: Remote I/O error
$ fallocate -zn -l 1k /dev/sdg # OK
$ fallocate -zn -l 1k /dev/sdg # OK
The following calls succeed because sd_done() sets ->no_write_same in
response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing
__blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios.
This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing
and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is
specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if
sd_done() has just set ->no_write_same thus indicating lack of offload
support.
Fixes: c20cfc27a473 ("block: stop using blkdev_issue_write_same for zeroing")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check for CAP_SYS_ADMIN before calling into the driver, similar to
blkdev_flushbuf(). This is safer and can spare a check in the driver.
(Currently BLKROSET is overridden by md and rbd, rbd is missing the
check. md has the check, but it covers a lot more than BLKROSET.)
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is reasonable drop page cache on discard, otherwise that pages may
be written by writeback second later, so thin provision devices will
not be happy. This seems to be a security leak in case of secure discard case.
Also add check for queue_discard flag on early stage.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No callers left.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Iterator helper to apply a function on all the
tags in a given tagset. export it as it will be used
outside the block layer later on.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When we're getting a domain token, if we fail to get a token on our
first attempt, we put the current hardware queue on a wait queue and
then try again just in case a token was freed after our initial attempt
but before we got on the wait queue. If this second attempt succeeds, we
currently leave the hardware queue on the wait queue. Usually this is
okay; we'll just run the hardware queue one extra time when another
token is freed. However, if the hardware queue doesn't have any other
requests waiting, then when it it gets the extra wakeup, it won't have
anything to free and therefore won't wake up any other hardware queues.
If tokens are limited, then we won't make forward progress and the
device will hang.
Reported-by: Bin Zha <zhabin.zb@alibaba-inc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sphinx treats symbols that end with '_' as a kind of special
documentation indicator, so fix that by adding an ending '*'
to it.
../block/bio.c:404: ERROR: Unknown target name: "gfp".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Legacy queue sets request's request_list, mq doesn't. This makes mq does
the same thing, so we can find cgroup of a request. Note, we really
only use blkg field of request_list, it's pointless to allocate mempool
for request_list in mq case.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix two issues:
- the per-cpu stat flush is unnecessary, nobody uses per-cpu stat except
sum it to global stat. We can do the calculation there. The flush just
wastes cpu time.
- some fields are signed int/s64. I don't see the point.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A null pointer dereference can occur when blkcg is removed manually
with writeback IOs inflight. This is caused by the following case:
Writeback kworker submit the bio and set bio->bi_cg_private to tg
in blk_throtl_assoc_bio.
Then we remove the block cgroup manually, the blkg and tg would be
freed if there is no request inflight.
When the submitted bio come back, blk_throtl_bio_endio() fetch the tg
which was already freed.
Fix this by increasing the refcount of blkg in funcion
blk_throtl_assoc_bio() so that the blkg will not be freed until the
bio_endio called.
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jiufei Xue <jiufei.xjf@alibaba-inc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
check pol->cpd_free_fn() instead of pol->cpd_alloc_fn() when free cpd.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The commit "block, bfq: decrease burst size when queues in burst
exit" introduced the decrement of burst_size on the removal of a
bfq_queue from the burst list. Unfortunately, this decrement can
happen to be performed even when burst size is already equal to 0,
because of unbalanced decrements. A description follows of the cause
of these unbalanced decrements, namely a wrong assumption, and of the
way how this wrong assumption leads to unbalanced decrements.
The wrong assumption is that a bfq_queue can exit only if the process
associated with the bfq_queue has exited. This is false, because a
bfq_queue, say Q, may exit also as a consequence of a merge with
another bfq_queue. In this case, Q exits because the I/O of its
associated process has been redirected to another bfq_queue.
The decrement unbalance occurs because Q may then be re-created after
a split, and added back to the current burst list, *without*
incrementing burst_size. burst_size is not incremented because Q is
not a new bfq_queue added to the burst list, but a bfq_queue only
temporarily removed from the list, and, before the commit "bfq-sq,
bfq-mq: decrease burst size when queues in burst exit", burst_size was
not decremented when Q was removed.
This commit addresses this issue by just checking whether the exiting
bfq_queue is a merged bfq_queue, and, in that case, not decrementing
burst_size. Unfortunately, this still leaves room for unbalanced
decrements, in the following rarer case: on a split, the bfq_queue
happens to be inserted into a different burst list than that it was
removed from when merged. If this happens, the number of elements in
the new burst list becomes higher than burst_size (by one). When the
bfq_queue then exits, it is of course not in a merged state any
longer, thus burst_size is decremented, which results in an unbalanced
decrement. To handle this sporadic, unlucky case in a simple way,
this commit also checks that burst_size is larger than 0 before
decrementing it.
Finally, this commit removes an useless, extra check: the check that
the bfq_queue is sync, performed before checking whether the bfq_queue
is in the burst list. This extra check is redundant, because only sync
bfq_queues can be inserted into the burst list.
Fixes: 7cb04004fa37 ("block, bfq: decrease burst size when queues in burst exit")
Reported-by: Philip Müller <philm@manjaro.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Philip Müller <philm@manjaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similarly to CFQ, BFQ has its write-throttling heuristics, and it
is better not to combine them with further write-throttling
heuristics of a different nature.
So this commit disables write-back throttling for a device if BFQ
is used as I/O scheduler for that device.
Signed-off-by: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch removes redundant checks for null values on bio_pool and
bvec_pool.
Found using make coccicheck M=block/ on linux-net tree on the
next-20170929 tag.
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
mempool_destroy() already checks for a NULL value being passed in, this
eliminates duplicate checks.
This was caught by running make coccicheck M=block/ on linus' tree on
commit 77ede3a014a32746002f7889211f0cecf4803163 (current head as of this
patch).
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already have a queue_is_rq_based helper to check if a request_queue
is request based, so we can remove the flag for it.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
