| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fixes from Jens Axboe:
"Bigger than usual for this point in time, the majority is fixing some
issues around BDI lifetimes with the move from the request_queue to
the disk in this release. In detail:
- Series on draining fs IO for del_gendisk() (Christoph)
- NVMe pull request via Christoph:
- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)
- brd locking scope fix (Tetsuo)
- BFQ fix (Paolo)"
* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
block, bfq: reset last_bfqq_created on group change
block: warn when putting the final reference on a registered disk
brd: reduce the brd_devices_mutex scope
kyber: avoid q->disk dereferences in trace points
block: keep q_usage_counter in atomic mode after del_gendisk
block: drain file system I/O on del_gendisk
block: split bio_queue_enter from blk_queue_enter
block: factor out a blk_try_enter_queue helper
block: call submit_bio_checks under q_usage_counter
nvme: fix per-namespace chardev deletion
block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
nvme-pci: Fix abort command id
|
|
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created
queues"), BFQ maintains a per-group pointer to the last bfq_queue
created. If such a queue, say bfqq, happens to move to a different
group, then bfqq is no more a valid last bfq_queue created for its
previous group. That pointer must then be cleared. Not resetting such
a pointer may also cause UAF, if bfqq happens to also be freed after
being moved to a different group. This commit performs this missing
reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts
of newly-created queues").
Such a missing reset is most likely the cause of the crash reported in [1].
With some analysis, we found that this crash was due to the
above UAF. And such UAF did go away with this commit applied [1].
Anyway, before this commit, that crash happened to be triggered in
conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup
queue merges"). The latter was then reverted by commit ebc69e897e17
("Revert "block, bfq: honor already-setup queue merges""). Yet commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains
no error related with the above UAF, and can then be restored.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues")
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
q->disk becomes invalid after the gendisk is removed. Work around this
by caching the dev_t for the tracepoints. The real fix would be to
properly tear down the I/O schedulers with the gendisk, but that is
a much more invasive change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't switch back to percpu mode to avoid the double RCU grace period
when tearing down SCSI devices. After removing the disk only passthrough
commands can be send anyway.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of delaying draining of file system I/O related items like the
blk-qos queues, the integrity read workqueue and timeouts only when the
request_queue is removed, do that when del_gendisk is called. This is
important for SCSI where the upper level drivers that control the gendisk
are separate entities, and the disk can be freed much earlier than the
request_queue, or can even be unbound without tearing down the queue.
Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To prepare for fixing a gendisk shutdown race, open code the
blk_queue_enter logic in bio_queue_enter. This also removes the
pointless flags translation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out the code to try to get q_usage_counter without blocking into
a separate helper. Both to improve code readability and to prepare for
splitting bio_queue_enter from blk_queue_enter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure all bios check the current values of the queue under freeze
protection, i.e. to make sure the zero capacity set by del_gendisk
is actually seen before dispatching to the driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Two small fixes for this release:
- Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
(Johannes)
- Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"
* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
block: genhd: fix double kfree() in __alloc_disk_node()
|
|
While debugging an issue we've found that $DEBUGFS/block/$disk/state
doesn't decode QUEUE_FLAG_HCTX_ACTIVE but only displays its numerical
value.
Add QUEUE_FLAG(HCTX_ACTIVE) to the blk_queue_flag_name array so it'll get
decoded properly.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/4351076388918075bd80ef07756f9d2ce63be12c.1633332053.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"A few block fixes for this release:
- Revert a BFQ commit that causes breakage for people. Unfortunately
it was auto-selected for stable as well, so now 5.14.7 suffers from
it too. Hopefully stable will pick up this revert quickly too, so
we can remove the issue on that end as well.
- Add a quirk for Apple NVMe controllers, which due to their
non-compliance broke due to the introduction of command sequences
(Keith)
- Use shifts in nbd, fixing a __divdi3 issue (Nick)"
* tag 'block-5.15-2021-10-01' of git://git.kernel.dk/linux-block:
nbd: use shifts rather than multiplies
Revert "block, bfq: honor already-setup queue merges"
nvme: add command id quirk for apple controllers
|
|
syzbot is reporting use-after-free read at bdev_free_inode() [1], for
kfree() from __alloc_disk_node() is called before bdev_free_inode()
(which is called after RCU grace period) reads bdev->bd_disk and calls
kfree(bdev->bd_disk).
Fix use-after-free read followed by double kfree() problem
by making sure that bdev->bd_disk is NULL when calling iput().
Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1]
Reported-by: syzbot <syzbot+8281086e8a6fbfbd952a@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/e6dd13c5-8db0-4392-6e78-a42ee5d2a1c4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b.
We have had several folks complain that this causes hangs for them, which
is especially problematic as the commit has also hit stable already.
As no resolution seems to be forthcoming right now, revert the patch.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirty-three fixes, I'm afraid.
Essentially the build up from the last couple of weeks while I've been
dealling with Linux Plumbers conference infrastructure issues. It's
mostly the usual assortment of spelling fixes and minor corrections.
The only core relevant changes are to the sd driver to reduce the spin
up message spew and fix a small memory leak on the freeing path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
scsi: ses: Retry failed Send/Receive Diagnostic commands
scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
scsi: lpfc: Fix gcc -Wstringop-overread warning, again
scsi: lpfc: Use correct scnprintf() limit
scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
scsi: core: Remove 'current_tag'
scsi: acornscsi: Remove tagged queuing vestiges
scsi: fas216: Kill scmd->tag
scsi: qla2xxx: Restore initiator in dual mode
scsi: ufs: core: Unbreak the reset handler
scsi: sd_zbc: Support disks with more than 2**32 logical blocks
scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
scsi: bsg: Fix device unregistration
scsi: sd: Make sd_spinup_disk() less noisy
scsi: ufs: ufs-pci: Fix Intel LKF link stability
scsi: mpt3sas: Clean up some inconsistent indenting
scsi: megaraid: Clean up some inconsistent indenting
scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
scsi: Remove SCSI CDROM MAINTAINERS entry
scsi: megaraid: Fix Coccinelle warning
...
|
|
When running ->fallocate(), blkdev_fallocate() should hold
mapping->invalidate_lock to prevent page cache from being accessed,
otherwise stale data may be read in page cache.
Without this patch, blktests block/009 fails sometimes. With this patch,
block/009 can pass always.
Also as Jan pointed out, no pages can be created in the discarded area
while you are holding the invalidate_lock, so remove the 2nd
truncate_bdev_range().
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
rq_qos framework is only applied on request based driver, so:
1) rq_qos_done_bio() needn't to be called for bio based driver
2) rq_qos_done_bio() needn't to be called for bio which isn't tracked,
such as bios ended from error handling code.
Especially in bio_endio():
1) request queue is referred via bio->bi_bdev->bd_disk->queue, which
may be gone since request queue refcount may not be held in above two
cases
2) q->rq_qos may be freed in blk_cleanup_queue() when calling into
__rq_qos_done_bio()
Fix the potential kernel panic by not calling rq_qos_ops->done_bio if
the bio isn't tracked. This way is safe because both ioc_rqos_done_bio()
and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.
Reported-by: Yu Kuai <yukuai3@huawei.com>
Cc: tj@kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
KASAN reports a use-after-free report when doing fuzz test:
[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338
[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621] dump_stack+0xf1/0x19b
[693354.105626] ? show_regs_print_info+0x5/0x5
[693354.105634] ? printk+0x9c/0xc3
[693354.105638] ? cpumask_weight+0x1f/0x1f
[693354.105648] print_address_description+0x70/0x360
[693354.105654] kasan_report+0x1b2/0x330
[693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670] bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675] ? bfq_cpd_init+0x20/0x20
[693354.105683] cgroup_file_write+0x3aa/0x510
[693354.105693] ? ___slab_alloc+0x507/0x540
[693354.105698] ? cgroup_file_poll+0x60/0x60
[693354.105702] ? 0xffffffff89600000
[693354.105708] ? usercopy_abort+0x90/0x90
[693354.105716] ? mutex_lock+0xef/0x180
[693354.105726] kernfs_fop_write+0x1ab/0x280
[693354.105732] ? cgroup_file_poll+0x60/0x60
[693354.105738] vfs_write+0xe7/0x230
[693354.105744] ksys_write+0xb0/0x140
[693354.105749] ? __ia32_sys_read+0x50/0x50
[693354.105760] do_syscall_64+0x112/0x370
[693354.105766] ? syscall_return_slowpath+0x260/0x260
[693354.105772] ? do_page_fault+0x9b/0x270
[693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784] ? enter_from_user_mode+0x30/0x30
[693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.105875] Allocated by task 1453337:
[693354.106001] kasan_kmalloc+0xa0/0xd0
[693354.106006] kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010] bfq_pd_alloc+0x96/0x120
[693354.106015] blkcg_activate_policy+0x1b7/0x2b0
[693354.106020] bfq_create_group_hierarchy+0x1e/0x80
[693354.106026] bfq_init_queue+0x678/0x8c0
[693354.106031] blk_mq_init_sched+0x1f8/0x460
[693354.106037] elevator_switch_mq+0xe1/0x240
[693354.106041] elevator_switch+0x25/0x40
[693354.106045] elv_iosched_store+0x1a1/0x230
[693354.106049] queue_attr_store+0x78/0xb0
[693354.106053] kernfs_fop_write+0x1ab/0x280
[693354.106056] vfs_write+0xe7/0x230
[693354.106060] ksys_write+0xb0/0x140
[693354.106064] do_syscall_64+0x112/0x370
[693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106114] Freed by task 1453336:
[693354.106225] __kasan_slab_free+0x130/0x180
[693354.106229] kfree+0x90/0x1b0
[693354.106233] blkcg_deactivate_policy+0x12c/0x220
[693354.106238] bfq_exit_queue+0xf5/0x110
[693354.106241] blk_mq_exit_sched+0x104/0x130
[693354.106245] __elevator_exit+0x45/0x60
[693354.106249] elevator_switch_mq+0xd6/0x240
[693354.106253] elevator_switch+0x25/0x40
[693354.106257] elv_iosched_store+0x1a1/0x230
[693354.106261] queue_attr_store+0x78/0xb0
[693354.106264] kernfs_fop_write+0x1ab/0x280
[693354.106268] vfs_write+0xe7/0x230
[693354.106271] ksys_write+0xb0/0x140
[693354.106275] do_syscall_64+0x112/0x370
[693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106329] The buggy address belongs to the object at ffff888be0a35580
which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected
[693354.108511] Memory state around the buggy address:
[693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421] ^
[693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================
blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.
CPU0 CPU1
blkcg_deactivate_policy
spin_lock_irq(&q->queue_lock)
bfq_io_set_weight_legacy
spin_lock_irq(&blkcg->lock)
blkg_to_bfqg(blkg)
pd_to_bfqg(blkg->pd[pol->plid])
^^^^^^blkg->pd[pol->plid] != NULL
bfqg != NULL
pol->pd_free_fn(blkg->pd[pol->plid])
pd_to_bfqg(blkg->pd[pol->plid])
bfqg_put(bfqg)
kfree(bfqg)
blkg->pd[pol->plid] = NULL
spin_unlock_irq(q->queue_lock);
bfq_group_set_weight(bfqg, val, 0)
bfqg->entity.new_weight
^^^^^^trigger uaf here
spin_unlock_irq(&blkcg->lock);
Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BUG: memory leak
unreferenced object 0xffff888129acdb80 (size 96):
comm "syz-executor.1", pid 12661, jiffies 4294962682 (age 15.220s)
hex dump (first 32 bytes):
20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff G...... ..)....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff82264ec8>] kmalloc include/linux/slab.h:591 [inline]
[<ffffffff82264ec8>] kzalloc include/linux/slab.h:721 [inline]
[<ffffffff82264ec8>] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724
[<ffffffff8225b8c4>] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185
[<ffffffff822253da>] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566
[<ffffffff8223b175>] blk_mq_init_queue_data block/blk-mq.c:3100 [inline]
[<ffffffff8223b175>] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124
[<ffffffff826a9303>] loop_add+0x1c3/0x360 drivers/block/loop.c:2344
[<ffffffff826a966e>] loop_control_get_free drivers/block/loop.c:2501 [inline]
[<ffffffff826a966e>] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516
[<ffffffff81597eec>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81597eec>] __do_sys_ioctl fs/ioctl.c:874 [inline]
[<ffffffff81597eec>] __se_sys_ioctl fs/ioctl.c:860 [inline]
[<ffffffff81597eec>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
[<ffffffff843fa745>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff843fa745>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will
not be invoked for cleanup. That leads a memory leak. Swap the
blk_throtl_init() and blk_iolatency_init() calls can solve this.
Reported-by: syzbot+01321b15cc98e6bf96d6@syzkaller.appspotmail.com
Fixes: 19688d7f9592 (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls)
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210915072426.4022924-1-yanfei.xu@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:
CPU0 CPU1
process_one_work nvme_validate_ns
bio_integrity_verify_fn nvme_update_ns_info
nvme_update_disk_info
blk_integrity_unregister
---set queue->integrity as 0
bio_integrity_process
--access bi->profile->verify_fn(bi is a pointer of queue->integity)
Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.
Signed-off-by: Lihong Kou <koulihong@huawei.com>
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.
Reported-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
device_initialize() is used to take a refcount on the device. However,
put_device() is not called during device teardown. This leads to a
leak of private data of the driver core, dev_name(), etc. This is
reported by kmemleak at boot time if we compile kernel with
DEBUG_TEST_DRIVER_REMOVE.
Fix memory leaks during unregistration and implement a release
function.
Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com
Fixes: ead09dd3aed5 ("scsi: bsg: Simplify device registration")
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
blk-mq can't run allocating driver tag and updating ->rqs[tag]
atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver
tag is released.
So there is chance to iterating over one stale request just after the
tag is allocated and before updating ->rqs[tag].
scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi
in-flight requests after scsi host is blocked, so no new scsi command can
be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can
be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT,
but this request may have been kept in another slot of ->rqs[], meantime
the slot can be allocated out but ->rqs[] isn't updated yet. Then this
in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes
trouble in handling scsi error.
Fixes the issue by not iterating over stale request.
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: luojiaxing <luojiaxing@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210906065003.439019-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
has been long overdue. Do this now before -rc1, to avoid annoying
conflicts due to this (Christoph)
- blk-throtl use-after-free fix (Li)
- Improve plug depth for multi-device plugs, greatly increasing md
resync performance (Song)
- blkdev_show() locking fix (Tetsuo)
- n64cart error check fix (Yang)
* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
n64cart: fix return value check in n64cart_probe()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
block: move fs/block_dev.c to block/bdev.c
block: split out operations on block special files
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
block: genhd: don't call blkdev_show() with major_names_lock held
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
|
|
Limiting number of request to BLK_MAX_REQUEST_COUNT at blk_plug hurts
performance for large md arrays. [1] shows resync speed of md array drops
for md array with more than 16 HDDs.
Fix this by allowing more request at plug queue. The multiple_queue flag
is used to only apply higher limit to multiple queue cases.
[1] https://lore.kernel.org/linux-raid/CAFDAVznS71BXW8Jxv6k9dXc2iR3ysX3iZRBww_rzA8WifBFxGg@mail.gmail.com/
Tested-by: Marcin Wanat <marcin.wanat@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move it together with the rest of the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new block/fops.c for all the file and address_space operations
that provide the block special file support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-2-hch@lst.de
[axboe: correct trailing whitespace while at it]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.
Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other
combinations), lockdep complains circular locking dependency at
__loop_clr_fd(), for major_names_lock serves as a locking dependency
aggregating hub across multiple block modules.
======================================================
WARNING: possible circular locking dependency detected
5.14.0+ #757 Tainted: G E
------------------------------------------------------
systemd-udevd/7568 is trying to acquire lock:
ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560
but task is already holding lock:
ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&lo->lo_mutex){+.+.}-{3:3}:
lock_acquire+0xbe/0x1f0
__mutex_lock_common+0xb6/0xe10
mutex_lock_killable_nested+0x17/0x20
lo_open+0x23/0x50 [loop]
blkdev_get_by_dev+0x199/0x540
blkdev_open+0x58/0x90
do_dentry_open+0x144/0x3a0
path_openat+0xa57/0xda0
do_filp_open+0x9f/0x140
do_sys_openat2+0x71/0x150
__x64_sys_openat+0x78/0xa0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #5 (&disk->open_mutex){+.+.}-{3:3}:
lock_acquire+0xbe/0x1f0
__mutex_lock_common+0xb6/0xe10
mutex_lock_nested+0x17/0x20
bd_register_pending_holders+0x20/0x100
device_add_disk+0x1ae/0x390
loop_add+0x29c/0x2d0 [loop]
blk_request_module+0x5a/0xb0
blkdev_get_no_open+0x27/0xa0
blkdev_get_by_dev+0x5f/0x540
blkdev_open+0x58/0x90
do_dentry_open+0x144/0x3a0
path_openat+0xa57/0xda0
do_filp_open+0x9f/0x140
do_sys_openat2+0x71/0x150
__x64_sys_openat+0x78/0xa0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #4 (major_names_lock){+.+.}-{3:3}:
lock_acquire+0xbe/0x1f0
__mutex_lock_common+0xb6/0xe10
mutex_lock_nested+0x17/0x20
blkdev_show+0x19/0x80
devinfo_show+0x52/0x60
seq_read_iter+0x2d5/0x3e0
proc_reg_read_iter+0x41/0x80
vfs_read+0x2ac/0x330
ksys_read+0x6b/0xd0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&p->lock){+.+.}-{3:3}:
lock_acquire+0xbe/0x1f0
__mutex_lock_common+0xb6/0xe10
mutex_lock_nested+0x17/0x20
seq_read_iter+0x37/0x3e0
generic_file_splice_read+0xf3/0x170
splice_direct_to_actor+0x14e/0x350
do_splice_direct+0x84/0xd0
do_sendfile+0x263/0x430
__se_sys_sendfile64+0x96/0xc0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#3){.+.+}-{0:0}:
lock_acquire+0xbe/0x1f0
lo_write_bvec+0x96/0x280 [loop]
loop_process_work+0xa68/0xc10 [loop]
process_one_work+0x293/0x480
worker_thread+0x23d/0x4b0
kthread+0x163/0x180
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
lock_acquire+0xbe/0x1f0
process_one_work+0x280/0x480
worker_thread+0x23d/0x4b0
kthread+0x163/0x180
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
validate_chain+0x1f0d/0x33e0
__lock_acquire+0x92d/0x1030
lock_acquire+0xbe/0x1f0
flush_workqueue+0x8c/0x560
drain_workqueue+0x80/0x140
destroy_workqueue+0x47/0x4f0
__loop_clr_fd+0xb4/0x400 [loop]
blkdev_put+0x14a/0x1d0
blkdev_close+0x1c/0x20
__fput+0xfd/0x220
task_work_run+0x69/0xc0
exit_to_user_mode_prepare+0x1ce/0x1f0
syscall_exit_to_user_mode+0x26/0x60
do_syscall_64+0x4c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
2 locks held by systemd-udevd/7568:
#0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0
#1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop]
stack backtrace:
CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ #757
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack_lvl+0x79/0xbf
print_circular_bug+0x5d6/0x5e0
? stack_trace_save+0x42/0x60
? save_trace+0x3d/0x2d0
check_noncircular+0x10b/0x120
validate_chain+0x1f0d/0x33e0
? __lock_acquire+0x953/0x1030
? __lock_acquire+0x953/0x1030
__lock_acquire+0x92d/0x1030
? flush_workqueue+0x70/0x560
lock_acquire+0xbe/0x1f0
? flush_workqueue+0x70/0x560
flush_workqueue+0x8c/0x560
? flush_workqueue+0x70/0x560
? sched_clock_cpu+0xe/0x1a0
? drain_workqueue+0x41/0x140
drain_workqueue+0x80/0x140
destroy_workqueue+0x47/0x4f0
? blk_mq_freeze_queue_wait+0xac/0xd0
__loop_clr_fd+0xb4/0x400 [loop]
? __mutex_unlock_slowpath+0x35/0x230
blkdev_put+0x14a/0x1d0
blkdev_close+0x1c/0x20
__fput+0xfd/0x220
task_work_run+0x69/0xc0
exit_to_user_mode_prepare+0x1ce/0x1f0
syscall_exit_to_user_mode+0x26/0x60
do_syscall_64+0x4c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f0fd4c661f7
Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff
RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006
RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000
R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050
Commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope") is for
breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling
a different block module results in forming circular locking dependency
due to shared major_names_lock mutex.
The simplest fix is to call probe function without holding
major_names_lock [1], but Christoph Hellwig does not like such idea.
Therefore, instead of holding major_names_lock in blkdev_show(),
introduce a different lock for blkdev_show() in order to break
"sb_writers#$N => &p->lock => major_names_lock" dependency chain.
Link: https://lkml.kernel.org/r/b2af8a5b-3c1b-204e-7f56-bea0b15848d6@i-love.sakura.ne.jp [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/18a02da2-0bf3-550e-b071-2b4ab13c49f0@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Was going to send this one in later this week, but given that -Werror
is now enabled (or at least available), the mq-deadline fix really
should go in for the folks hitting that.
- Ensure dd_queued() is only there if needed (Geert)
- Fix a kerneldoc warning for bio_alloc_kiocb()
- BFQ fix for queue merging
- loop locking fix (Tetsuo)"
* tag 'block-5.15-2021-09-05' of git://git.kernel.dk/linux-block:
loop: reduce the loop_ctl_mutex scope
bio: fix kerneldoc documentation for bio_alloc_kiocb()
block, bfq: honor already-setup queue merges
block/mq-deadline: Move dd_queued() to fix defined but not used warning
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Apparently the last fixup got butter fingered a bit, the correct variable
name is 'nr_vecs', not 'nr_iovecs'.
Link: https://lore.kernel.org/lkml/20210903164939.02f6e8c5@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
The function bfq_setup_merge prepares the merging between two
bfq_queues, say bfqq and new_bfqq. To this goal, it assigns
bfqq->new_bfqq = new_bfqq. Then, each time some I/O for bfqq arrives,
the process that generated that I/O is disassociated from bfqq and
associated with new_bfqq (merging is actually a redirection). In this
respect, bfq_setup_merge increases new_bfqq->ref in advance, adding
the number of processes that are expected to be associated with
new_bfqq.
Unfortunately, the stable-merging mechanism interferes with this
setup. After bfqq->new_bfqq has been set by bfq_setup_merge, and
before all the expected processes have been associated with
bfqq->new_bfqq, bfqq may happen to be stably merged with a different
queue than the current bfqq->new_bfqq. In this case, bfqq->new_bfqq
gets changed. So, some of the processes that have been already
accounted for in the ref counter of the previous new_bfqq will not be
associated with that queue. This creates an unbalance, because those
references will never be decremented.
This commit fixes this issue by reestablishing the previous, natural
behaviour: once bfqq->new_bfqq has been set, it will not be changed
until all expected redirections have occurred.
Signed-off-by: Davide Zini <davidezini2@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210802141352.74353-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If CONFIG_BLK_DEBUG_FS=n:
block/mq-deadline.c:274:12: warning: ‘dd_queued’ defined but not used [-Wunused-function]
274 | static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio)
| ^~~~~~~~~
Fix this by moving dd_queued() just before the sole function that calls
it.
Fixes: 7b05bf771084ff78 ("Revert "block/mq-deadline: Prioritize high-priority requests"")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 38ba64d12d4c ("block/mq-deadline: Track I/O statistics")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210830091128.1854266-1-geert@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights of this round are integrations with fs-verity and
idmapped mounts, the rest is usual mix of minor improvements, speedups
and cleanups.
There are some patches outside of btrfs, namely updating some VFS
interfaces, all straightforward and acked.
Features:
- fs-verity support, using standard ioctls, backward compatible with
read-only limitation on inodes with previously enabled fs-verity
- idmapped mount support
- make mount with rescue=ibadroots more tolerant to partially damaged
trees
- allow raid0 on a single device and raid10 on two devices,
degenerate cases but might be useful as an intermediate step during
conversion to other profiles
- zoned mode block group auto reclaim can be disabled via sysfs knob
Performance improvements:
- continue readahead of node siblings even if target node is in
memory, could speed up full send (on sample test +11%)
- batching of delayed items can speed up creating many files
- fsync/tree-log speedups
- avoid unnecessary work (gains +2% throughput, -2% run time on
sample load)
- reduced lock contention on renames (on dbench +4% throughput,
up to -30% latency)
Fixes:
- various zoned mode fixes
- preemptive flushing threshold tuning, avoid excessive work on
almost full filesystems
Core:
- continued subpage support, preparation for implementing remaining
features like compression and defragmentation; with some
limitations, write is now enabled on 64K page systems with 4K
sectors, still considered experimental
- no readahead on compressed reads
- inline extents disabled
- disabled raid56 profile conversion and mount
- improved flushing logic, fixing early ENOSPC on some workloads
- inode flags have been internally split to read-only and read-write
incompat bit parts, used by fs-verity
- new tree items for fs-verity
- descriptor item
- Merkle tree item
- inode operations extended to be namespace-aware
- cleanups and refactoring
Generic code changes:
- fs: new export filemap_fdatawrite_wbc
- fs: removed sync_inode
- block: bio_trim argument type fixups
- vfs: add namespace-aware lookup"
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reset replace target device to allocation state on close
btrfs: zoned: fix ordered extent boundary calculation
btrfs: do not do preemptive flushing if the majority is global rsv
btrfs: reduce the preemptive flushing threshold to 90%
btrfs: tree-log: check btrfs_lookup_data_extent return value
btrfs: avoid unnecessarily logging directories that had no changes
btrfs: allow idmapped mount
btrfs: handle ACLs on idmapped mounts
btrfs: allow idmapped INO_LOOKUP_USER ioctl
btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
btrfs: allow idmapped SNAP_DESTROY ioctls
btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
btrfs: check whether fsgid/fsuid are mapped during subvolume creation
btrfs: allow idmapped permission inode op
btrfs: allow idmapped setattr inode op
btrfs: allow idmapped tmpfile inode op
btrfs: allow idmapped symlink inode op
btrfs: allow idmapped mkdir inode op
...
|
|
Pull support for struct bio recycling from Jens Axboe:
"This adds bio recycling support for polled IO, allowing quick reuse of
a bio for high IOPS scenarios via a percpu bio_set list.
It's good for almost a 10% improvement in performance, bumping our
per-core IO limit from ~3.2M IOPS to ~3.5M IOPS"
* tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-block:
bio: improve kerneldoc documentation for bio_alloc_kiocb()
block: provide bio_clear_hipri() helper
block: use the percpu bio cache in __blkdev_direct_IO
io_uring: enable use of bio alloc cache
block: clear BIO_PERCPU_CACHE flag if polling isn't supported
bio: add allocation cache abstraction
fs: add kiocb alloc cache flag
bio: optimize initialization of a bio
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
|
|
Pull block fixes from Jens Axboe:
- Revert the mq-deadline priority handling, it's causing serious
performance regressions. While experimental patches exists to fix
this up, it's too late to do so now. Revert it and re-do it properly
for 5.15 instead.
- Fix a NULL vs IS_ERR() regression in this release (Dan)
- Fix a mq-deadline accounting regression in this release (Bart)
- Mark cryptoloop as deprecated. It's broken and dm-crypt fully
supports it, and it's actively intefering with loop. Plan on removal
for 5.16 (Christoph)
* tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block:
cryptoloop: add a deprecation warning
pd: fix a NULL vs IS_ERR() check
Revert "block/mq-deadline: Prioritize high-priority requests"
mq-deadline: Fix request accounting
|
|
This reverts commit fb926032b3209300f9dc454a36b8299582ae545c.
Zhen reports that this commit slows down mq-deadline on a 128 thread
box, going from 258K IOPS to 170-180K. My testing shows that Optane
gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box.
Looking in detail at the code, the main culprit here is needing to sum
percpu counters in the dispatch hot path, leading to very high CPU
utilization there. To make matters worse, the code currently needs to
sum 2 percpu counters, and it does so in the most naive way of iterating
possible CPUs _twice_.
Since we're close to release, revert this commit and we can re-do it
with regular per-priority counters instead for the 5.15 kernel.
Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/
Reported-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Function 'bfq_entity_to_bfqq' is declared twice, so remove the
repeated declaration and blank line.
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1629872391-46399-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dun_bytes needs to be less than or equal to the IV size of the
encryption mode, not just less than or equal to BLK_CRYPTO_MAX_IV_SIZE.
Currently this doesn't matter since blk_crypto_init_key() is never
actually passed invalid values, but we might as well fix this.
Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210825055918.51975-1-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer may call the I/O scheduler .finish_request() callback
without having called the .insert_requests() callback. Make sure that the
mq-deadline I/O statistics are correct if the block layer inserts an I/O
request that bypasses the I/O scheduler. This patch prevents that lower
priority I/O is delayed longer than necessary for mixed I/O priority
workloads.
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.
Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).
Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).
Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.
Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
hidden gendisks will never be marked live.
Fixes: 40b3a52ffc5b ("block: add a sanity check for a live disk in del_gendisk")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824144310.1487816-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support looking up GPT at a non-standard location specified by a block
device driver.
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210820004536.15791-3-digetx@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__bio_iov_append_get_pages() doesn't put not appended pages on
bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do
the same for __bio_iov_iter_get_pages(), even though it looks like it
can't be triggered by userspace in this case.
Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
