summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2019-10-03block: sed-opal: fix sparse warning: convert __be64 dataRandy Dunlap
sparse warns about incorrect type when using __be64 data. It is not being converted to CPU-endian but it should be. Fixes these sparse warnings: ../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:375:20: expected unsigned long long [usertype] align ../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity ../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba ../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Cc: Scott Bauer <scott.bauer@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: linux-block@vger.kernel.org Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-03block: sed-opal: fix sparse warning: obsolete array init.Randy Dunlap
Fix sparse warning: (missing '=') ../block/sed-opal.c:133:17: warning: obsolete array initializer, use C99 syntax Fixes: ff91064ea37c ("block: sed-opal: check size of shadow mbr") Cc: linux-block@vger.kernel.org Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Cc: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27blk-mq: apply normal plugging for HDDMing Lei
Some HDD drive may expose multiple hardware queues, such as MegraRaid. Let's apply the normal plugging for such devices because sequential IO may benefit a lot from plug merging. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27blk-mq: honor IO scheduler for multiqueue devicesMing Lei
If a device is using multiple queues, the IO scheduler may be bypassed. This may hurt performance for some slow MQ devices, and it also breaks zoned devices which depend on mq-deadline for respecting the write order in one zone. Don't bypass io scheduler if we have one setup. This patch can double sequential write performance basically on MQ scsi_debug when mq-deadline is applied. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27block: fix null pointer dereference in blk_mq_rq_timed_out()Yufen Yu
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out() as following: [ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 108.827059] PGD 0 P4D 0 [ 108.827313] Oops: 0000 [#1] SMP PTI [ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431 [ 108.829503] Workqueue: kblockd blk_mq_timeout_work [ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330 [ 108.838191] Call Trace: [ 108.838406] bt_iter+0x74/0x80 [ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450 [ 108.839074] ? __switch_to_asm+0x34/0x70 [ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40 [ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40 [ 108.840273] ? syscall_return_via_sysret+0xf/0x7f [ 108.840732] blk_mq_timeout_work+0x74/0x200 [ 108.841151] process_one_work+0x297/0x680 [ 108.841550] worker_thread+0x29c/0x6f0 [ 108.841926] ? rescuer_thread+0x580/0x580 [ 108.842344] kthread+0x16a/0x1a0 [ 108.842666] ? kthread_flush_work+0x170/0x170 [ 108.843100] ret_from_fork+0x35/0x40 The bug is caused by the race between timeout handle and completion for flush request. When timeout handle function blk_mq_rq_timed_out() try to read 'req->q->mq_ops', the 'req' have completed and reinitiated by next flush request, which would call blk_rq_init() to clear 'req' as 0. After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"), normal requests lifetime are protected by refcount. Until 'rq->ref' drop to zero, the request can really be free. Thus, these requests cannot been reused before timeout handle finish. However, flush request has defined .end_io and rq->end_io() is still called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq' can be reused by the next flush request handle, resulting in null pointer deference BUG ON. We fix this problem by covering flush request with 'rq->ref'. If the refcount is not zero, flush_end_io() return and wait the last holder recall it. To record the request status, we add a new entry 'rq_status', which will be used in flush_end_io(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: stable@vger.kernel.org # v4.18+ Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> ------- v2: - move rq_status from struct request to struct blk_flush_queue v3: - remove unnecessary '{}' pair. v4: - let spinlock to protect 'fq->rq_status' v5: - move rq_status after flush_running_idx member of struct blk_flush_queue Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27rq-qos: get rid of redundant wbt_update_limits()Yufen Yu
We have updated limits after calling wbt_set_min_lat(). No need to update again. Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26iocost: bump up default latency targets for hard disksTejun Heo
The default hard disk param sets latency targets at 50ms. As the default target percentiles are zero, these don't directly regulate vrate; however, they're still used to calculate the period length - 100ms in this case. This is excessively low. A SATA drive with QD32 saturated with random IOs can easily reach avg completion latency of several hundred msecs. A period duration which is substantially lower than avg completion latency can lead to wildly fluctuating vrate. Let's bump up the default latency targets to 250ms so that the period duration is sufficiently long. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26iocost: improve nr_lagging handlingTejun Heo
Some IOs may span multiple periods. As latencies are collected on completion, the inbetween periods won't register them and may incorrectly decide to increase vrate. nr_lagging tracks these IOs to avoid those situations. Currently, whenever there are IOs which are spanning from the previous period, busy_level is reset to 0 if negative thus suppressing vrate increase. This has the following two problems. * When latency target percentiles aren't set, vrate adjustment should only be governed by queue depth depletion; however, the current code keeps nr_lagging active which pulls in latency results and can keep down vrate unexpectedly. * When lagging condition is detected, it resets the entire negative busy_level. This turned out to be way too aggressive on some devices which sometimes experience extended latencies on a small subset of commands. In addition, a lagging IO will be accounted as latency target miss on completion anyway and resetting busy_level amplifies its impact unnecessarily. This patch fixes the above two problems by disabling nr_lagging counting when latency target percentiles aren't set and blocking vrate increases when there are lagging IOs while leaving busy_level as-is. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26iocost: better trace vrate changesTejun Heo
vrate_adj tracepoint traces vrate changes; however, it does so only when busy_level is non-zero. busy_level turning to zero can sometimes be as interesting an event. This patch also enables vrate_adj tracepoint on other vrate related events - busy_level changes and non-zero nr_lagging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26block: don't release queue's sysfs lock during switching elevatorMing Lei
cecf5d87ff20 ("block: split .sysfs_lock into two locks") starts to release & acquire sysfs_lock before registering/un-registering elevator queue during switching elevator for avoiding potential deadlock from showing & storing 'queue/iosched' attributes and removing elevator's kobject. Turns out there isn't such deadlock because 'q->sysfs_lock' isn't required in .show & .store of queue/iosched's attributes, and just elevator's sysfs lock is acquired in elv_iosched_store() and elv_iosched_show(). So it is safe to hold queue's sysfs lock when registering/un-registering elevator queue. The biggest issue is that commit cecf5d87ff20 assumes that concurrent write on 'queue/scheduler' can't happen. However, this assumption isn't true, because kernfs_fop_write() only guarantees that concurrent write aren't called on the same open file, but the write could be from different open on the file. So we can't release & re-acquire queue's sysfs lock during switching elevator, otherwise use-after-free on elevator could be triggered. Fixes the issue by not releasing queue's sysfs lock during switching elevator. Fixes: cecf5d87ff20 ("block: split .sysfs_lock into two locks") Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26blk-mq: move lockdep_assert_held() into elevator_exitMing Lei
Commit c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq") removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with lockdep_assert_held() called in blk_mq_sched_free_requests() which is run in failure path of elevator_init_mq(). blk_mq_sched_free_requests() is called in the following 3 functions: elevator_init_mq() elevator_exit() blk_cleanup_queue() In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly by 'mutex_lock(&q->sysfs_lock)'. So moving the lockdep_assert_held() from blk_mq_sched_free_requests() into elevator_exit() for fixing the report by syzbot. Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com Fixed: c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-24Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type
2019-09-23block: drop device references in bsg_queue_rq()Martin Wilck
Make sure that bsg_queue_rq() calls put_device() if an error is encountered after get_device() was successful. Fixes: cd2f076f1d7a ("bsg: convert to use blk-mq") Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-23block: t10-pi: fix -Wswitch warningMax Gurtovoy
Changing the switch() statement to symbolic constants made the compiler (at least clang-9, did not check gcc) notice that there is one enum value that is not handled here: block/t10-pi.c:62:11: error: enumeration value 'T10_PI_TYPE0_PROTECTION' not handled in switch [-Werror,-Wswitch] Add a BUG_ON statement if we ever get to t10_pi_verify function with TYPE0 and replace the switch() statement with if/else clause for the valid types. Fixes: 9b2061b1a262 ("block: use symbolic constants for t10_pi type") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-17block, bfq: push up injection only after setting service timePaolo Valente
If equal to 0, the injection limit for a bfq_queue is pushed to 1 after a first sample of the total service time of the I/O requests of the queue is computed (to allow injection to start). Yet, because of a mistake in the branch that performs this action, the push may happen also in some other case. This commit fixes this issue. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: increase update frequency of inject limitPaolo Valente
The update period of the injection limit has been tentatively set to 100 ms, to reduce fluctuations. This value however proved to cause, occasionally, the limit to be decremented for some bfq_queue only after the queue underwent excessive injection for a lot of time. This commit reduces the period to 10 ms. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1Paolo Valente
Upon an increment attempt of the injection limit, the latter is constrained not to become higher than twice the maximum number max_rq_in_driver of I/O requests that have happened to be in service in the drive. This high bound allows the injection limit to grow beyond max_rq_in_driver, which may then cause max_rq_in_driver itself to grow. However, since the limit is incremented by only one unit at a time, there is no need for such a high bound, and just max_rq_in_driver+1 is enough. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: update inject limit only after injection occurredPaolo Valente
BFQ updates the injection limit of each bfq_queue as a function of how much the limit inflates the service times experienced by the I/O requests of the queue. So only service times affected by injection must be taken into account. Unfortunately, in the current implementation of this update scheme, the service time of an I/O request rq not affected by injection may happen to be considered in the following case: there is no I/O request in service when rq arrives. This commit fixes this issue by making sure that only service times affected by injection are considered for updating the injection limit. In particular, the service time of an I/O request rq is now considered only if at least one of the following two conditions holds: - the destination bfq_queue for rq underwent injection before rq arrival, and there is still I/O in service in the drive on rq arrival (the service of such unfinished I/O may delay the service of rq); - injection occurs between the arrival and the completion time of rq. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block: centralize PI remapping logic to the block layerMax Gurtovoy
Currently t10_pi_prepare/t10_pi_complete functions are called during the NVMe and SCSi layers command preparetion/completion, but their actual place should be the block layer since T10-PI is a general data integrity feature that is used by block storage protocols. Introduce .prepare_fn and .complete_fn callbacks within the integrity profile that each type can implement according to its needs. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY isn't defined in the config. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block: use symbolic constants for t10_pi typeMax Gurtovoy
Replace all hard-coded values with T10_PI_TYPES to make the code more readable. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...
2019-09-17Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer updates from Thomas Gleixner: "Timers and timekeeping updates: - A large overhaul of the posix CPU timer code which is a preparation for moving the CPU timer expiry out into task work so it can be properly accounted on the task/process. An update to the bogus permission checks will come later during the merge window as feedback was not complete before heading of for travel. - Switch the timerqueue code to use cached rbtrees and get rid of the homebrewn caching of the leftmost node. - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a single function - Implement the separation of hrtimers to be forced to expire in hard interrupt context even when PREEMPT_RT is enabled and mark the affected timers accordingly. - Implement a mechanism for hrtimers and the timer wheel to protect RT against priority inversion and live lock issues when a (hr)timer which should be canceled is currently executing the callback. Instead of infinitely spinning, the task which tries to cancel the timer blocks on a per cpu base expiry lock which is held and released by the (hr)timer expiry code. - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests resulting in faster access to timekeeping functions. - Updates to various clocksource/clockevent drivers and their device tree bindings. - The usual small improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) posix-cpu-timers: Fix permission check regression posix-cpu-timers: Always clear head pointer on dequeue hrtimer: Add a missing bracket and hide `migration_base' on !SMP posix-cpu-timers: Make expiry_active check actually work correctly posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build tick: Mark sched_timer to expire in hard interrupt context hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n posix-cpu-timers: Utilize timerqueue for storage posix-cpu-timers: Move state tracking to struct posix_cputimers posix-cpu-timers: Deduplicate rlimit handling posix-cpu-timers: Remove pointless comparisons posix-cpu-timers: Get rid of 64bit divisions posix-cpu-timers: Consolidate timer expiry further posix-cpu-timers: Get rid of zero checks rlimit: Rewrite non-sensical RLIMIT_CPU comment posix-cpu-timers: Respect INFINITY for hard RTTIME limit posix-cpu-timers: Switch thread group sampling to array posix-cpu-timers: Restructure expiry array posix-cpu-timers: Remove cputime_expires ...
2019-09-15block: also check RQF_STATS in blk_mq_need_time_stamp()Hou Tao
In __blk_mq_end_request() if block stats needs update, we should ensure now is valid instead of 0 even when iostat is disabled. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-15block: make rq sector size accessible for block statsHou Tao
Currently rq->data_len will be decreased by partial completion or zeroed by completion, so when blk_stat_add() is invoked, data_len will be zero and there will never be samples in poll_cb because blk_mq_poll_stats_bkt() will return -1 if data_len is zero. We could move blk_stat_add() back to __blk_mq_complete_request(), but that would make the effort of trying to call ktime_get_ns() once in vain. Instead we can reuse throtl_size field, and use it for both block stats and block throttle, and adjust the logic in blk_mq_poll_stats_bkt() accordingly. Fixes: 4bc6339a583c ("block: move blk_stat_add() to __blk_mq_end_request()") Tested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-14bfq: Fix bfq linkage errorPavel Begunkov
Since commit 795fe54c2a828099e ("bfq: Add per-device weight"), bfq uses blkg_conf_prep() and blkg_conf_finish(), which are not exported. So, it causes linkage error if bfq compiled as a module. Fixes: 795fe54c2a828099e ("bfq: Add per-device weight") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-12block: fix race between switching elevator and removing queuesMing Lei
cecf5d87ff20 ("block: split .sysfs_lock into two locks") starts to release & actuire sysfs_lock again during switching elevator. So it isn't enough to prevent switching elevator from happening by simply clearing QUEUE_FLAG_REGISTERED with holding sysfs_lock, because in-progress switch still can move on after re-acquiring the lock, meantime the flag of QUEUE_FLAG_REGISTERED won't get checked. Fixes this issue by checking 'q->elevator' directly & locklessly after q->kobj is removed in blk_unregister_queue(), this way is safe because q->elevator can't be changed at that time. Fixes: cecf5d87ff20 ("block: split .sysfs_lock into two locks") Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-12block: bypass blk_set_runtime_active for uninitialized q->devStanley Chu
Some devices may skip blk_pm_runtime_init() and have null pointer in its request_queue->dev. For example, SCSI devices of UFS Well-Known LUNs. Currently the null pointer is checked by the user of blk_set_runtime_active(), i.e., scsi_dev_type_resume(). It is better to check it by blk_set_runtime_active() itself instead of by its users. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-10iocost_monitor: Report debtTejun Heo
Report debt and rename del_ms row to delay for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-10blk-iocost: Don't let merges push vtime into the futureTejun Heo
Merges have the same problem that forced-bios had which is fixed by the previous patch. The cost of a merge is calculated at the time of issue and force-advances vtime into the future. Until global vtime catches up, how the cgroup's hweight changes in the meantime doesn't matter and it often leads to situations where the cost is calculated at one hweight and paid at a very different one. See the previous patch for more details. Fix it by never advancing vtime into the future for merges. If budget is available, vtime is advanced. Otherwise, the cost is charged as debt. This brings merge cost handling in line with issue cost handling in ioc_rqos_throttle(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-10blk-iocost: Account force-charged overage in absolute vtimeTejun Heo
Currently, when a bio needs to be force-charged and there isn't enough budget, vtime is simply pushed into the future. This means that the cost of the whole bio is scaled using the current hweight and then charged immediately. Until the global vtime advances beyond this future vtime, the cgroup won't be allowed to issue normal IOs. This is incorrect and can lead to, for example, exploding vrate or extended stalls if vrate range is constrained. Consider the following scenario. 1. A cgroup with a very low hweight runs out of budget. 2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future. 3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime. 4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle. This is because the hweight the overage is calculated at is different from the hweight that it's being paid at. Fix it by remembering the overage in absoulte vtime and continuously paying with the actual budget according to the current hweight at each period. Note that non-forced bios which wait already remembers the cost in absolute vtime. This brings forced-bio accounting in line. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-10blk-iocost: Fix incorrect operation order during iocg freeTejun Heo
ioc_pd_free() first cancels the hrtimers and then deactivates the iocg. However, the iocg timer can run inbetween and reschedule the hrtimers which will end up running after the iocg is freed leading to crashes like the following. general protection fault: 0000 [#1] SMP ... RIP: 0010:iocg_kick_delay+0xbe/0x1b0 RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046 RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400 RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0 R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1 FS: 0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> iocg_delay_timer_fn+0x3d/0x60 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> Fix it by canceling hrtimers after deactivating the iocg. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06bfq: Add per-device weightFam Zheng
This adds to BFQ the missing per-device weight interfaces: blkio.bfq.weight_device on legacy and io.bfq.weight on unified. The implementation pretty closely resembles what we had in CFQ and the parsing code is basically reused. Tests ===== Using two cgroups and three block devices, having weights setup as: Cgroup test1 test2 ============================================ default 100 500 sda 500 100 sdb default default sdc 200 200 cgroup v1 runs -------------- sda.test1.out: READ: bw=913MiB/s sda.test2.out: READ: bw=183MiB/s sdb.test1.out: READ: bw=213MiB/s sdb.test2.out: READ: bw=1054MiB/s sdc.test1.out: READ: bw=650MiB/s sdc.test2.out: READ: bw=650MiB/s cgroup v2 runs -------------- sda.test1.out: READ: bw=915MiB/s sda.test2.out: READ: bw=184MiB/s sdb.test1.out: READ: bw=216MiB/s sdb.test2.out: READ: bw=1069MiB/s sdc.test1.out: READ: bw=621MiB/s sdc.test2.out: READ: bw=622MiB/s Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06bfq: Extract bfq_group_set_weight from bfq_io_set_weight_legacyFam Zheng
This function will be useful when we update weight from the soon-coming per-device interface. Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06bfq: Fix the missing barrier in __bfq_entity_update_weight_prioFam Zheng
The comment of bfq_group_set_weight says the reading of prio_changed should happen before the reading of weight, but a memory barrier is missing here. Add it now, to match the smp_wmb() there. Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06block: fix elevator_get_by_features()Jens Axboe
The lookup logic is broken - 'e' will never be NULL, even if the list is empty. Maintain lookup hit in a separate variable instead. Fixes: a0958ba7fcdc ("block: Improve default elevator selection") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Delay default elevator initializationDamien Le Moal
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Improve default elevator selectionDamien Le Moal
For block devices that do not specify required features, preserve the current default elevator selection (mq-deadline for single queue devices, none for multi-queue devices). However, for devices specifying required features (e.g. zoned block devices ELEVATOR_F_ZBD_SEQ_WRITE feature), select the first available elevator providing the required features. In all cases, default to "none" if no elevator is available or if the initialization of the default elevator fails. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Introduce elevator featuresDamien Le Moal
Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Change elevator_init_mq() to always succeedDamien Le Moal
If the default elevator chosen is mq-deadline, elevator_init_mq() may return an error if mq-deadline initialization fails, leading to blk_mq_init_allocated_queue() returning an error, which in turn will cause the block device initialization to fail and the device not being exposed. Instead of taking such extreme measure, handle mq-deadline initialization failures in the same manner as when mq-deadline is not available (no module to load), that is, default to the "none" scheduler. With this change, elevator_init_mq() return type can be changed to void. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Cleanup elevator_init_mq() useDamien Le Moal
Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before calling elevator_init_mq() to make sure that the queue supports IO scheduling, use the elevator.c function elv_support_iosched() in elevator_init_mq(). This does not introduce any functional change but ensure that elevator_init_mq() does the right thing based on the queue settings. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03block: elevator.c: Remove now unused elevator= argumentMarcos Paulo de Souza
Since the inclusion of blk-mq, elevator argument was not being considered anymore, and it's utility died long with the legacy IO path, now removed too. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Fold with doc removal patch. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03block: mq-deadline: Fix queue restart handlingDamien Le Moal
Commit 7211aef86f79 ("block: mq-deadline: Fix write completion handling") added a call to blk_mq_sched_mark_restart_hctx() in dd_dispatch_request() to make sure that write request dispatching does not stall when all target zones are locked. This fix left a subtle race when a write completion happens during a dispatch execution on another CPU: CPU 0: Dispatch CPU1: write completion dd_dispatch_request() lock(&dd->lock); ... lock(&dd->zone_lock); dd_finish_request() rq = find request lock(&dd->zone_lock); unlock(&dd->zone_lock); zone write unlock unlock(&dd->zone_lock); ... __blk_mq_free_request check restart flag (not set) -> queue not run ... if (!rq && have writes) blk_mq_sched_mark_restart_hctx() unlock(&dd->lock) Since the dispatch context finishes after the write request completion handling, marking the queue as needing a restart is not seen from __blk_mq_free_request() and blk_mq_sched_restart() not executed leading to the dispatch stall under 100% write workloads. Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from dd_dispatch_request() into dd_finish_request() under the zone lock to ensure full mutual exclusion between write request dispatch selection and zone unlock on write request completion. Fixes: 7211aef86f79 ("block: mq-deadline: Fix write completion handling") Cc: stable@vger.kernel.org Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03block: add a helper function to merge the segmentsYoshihiro Shimoda
This patch adds a helper function whether a queue can merge the segments by the DMA MAP layer (e.g. via IOMMU). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-30blkcg: add missing NULL check in ioc_cpd_alloc()Tejun Heo
ioc_cpd_alloc() forgot to check NULL return from kzalloc(). Add it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-29blkcg: fix missing free on error path of blk_iocost_init()Tejun Heo
blk_iocost_init() forgot to free its percpu stat on the error path. Fix it. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Reported-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: add tools/cgroup/iocost_coef_gen.pyTejun Heo
Add a script which can be used to generate device-specific iocost linear model coefficients. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: add tools/cgroup/iocost_monitor.pyTejun Heo
Instead of mucking with debugfs and ->pd_stat(), add drgn based monitoring script. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: implement blk-iocostTejun Heo
This patchset implements IO cost model based work-conserving proportional controller. While io.latency provides the capability to comprehensively prioritize and protect IOs depending on the cgroups, its protection is binary - the lowest latency target cgroup which is suffering is protected at the cost of all others. In many use cases including stacking multiple workload containers in a single system, it's necessary to distribute IO capacity with better granularity. One challenge of controlling IO resources is the lack of trivially observable cost metric. The most common metrics - bandwidth and iops - can be off by orders of magnitude depending on the device type and IO pattern. However, the cost isn't a complete mystery. Given several key attributes, we can make fairly reliable predictions on how expensive a given stream of IOs would be, at least compared to other IO patterns. The function which determines the cost of a given IO is the IO cost model for the device. This controller distributes IO capacity based on the costs estimated by such model. The more accurate the cost model the better but the controller adapts based on IO completion latency and as long as the relative costs across differents IO patterns are consistent and sensible, it'll adapt to the actual performance of the device. Currently, the only implemented cost model is a simple linear one with a few sets of default parameters for different classes of device. This covers most common devices reasonably well. All the infrastructure to tune and add different cost models is already in place and a later patch will also allow using bpf progs for cost models. Please see the top comment in blk-iocost.c and documentation for more details. v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix for a divide-by-zero bug in current_hweight() triggered by zero inuse_sum. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blk-mq: add optional request->alloc_time_nsTejun Heo
There are currently two start time timestamps - start_time_ns and io_start_time_ns. The former marks the request allocation and and the second issue-to-device time. The planned io.weight controller needs to measure the total time bios take to execute after it leaves rq_qos including the time spent waiting for request to become available, which can easily dominate on saturated devices. This patch adds request->alloc_time_ns which records when the request allocation attempt started. As it isn't used for the usual stats, make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are no users and it's active only on queues which need it even when compiled in. v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME gating as suggested by Jens. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>