summaryrefslogtreecommitdiff
path: root/crypto/ecdh.c
AgeCommit message (Collapse)Author
2021-05-28crypto: ecdh - register NIST P384 tfmHui Tang
Add ecdh_nist_p384_init_tfm and register and unregister P384 tfm. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: ecdh - fix 'ecdh_init'Hui Tang
NIST P192 is not unregistered if failed to register NIST P256, actually it need to unregister the algorithms already registered. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: ecdh - fix ecdh-nist-p192's entry in testmgrHui Tang
Add a comment that p192 will fail to register in FIPS mode. Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs and not setting fips_allowed. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: ecdh - extend 'cra_driver_name' with curve nameHui Tang
Currently, 'cra_driver_name' cannot be used to specify ecdh algorithm with a special curve, so extending it with curve name. Although using 'cra_name' can also specify a special curve, but ecdh generic driver cannot be specified when vendor hardware accelerator has registered. Fixes: 6763f5ea2d9a ("crypto: ecdh - move curve_id of ECDH from ...") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-13crypto: ecdh - move curve_id of ECDH from the key to algorithm nameMeng Yu
1. crypto and crypto/atmel-ecc: Move curve id of ECDH from the key into the algorithm name instead in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh' to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh'; 2. crypto/testmgr and net/bluetooth: Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt the modification. Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03crypto: ecdh - avoid buffer overflow in ecdh_set_secret()Ard Biesheuvel
Pavel reports that commit 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") fixes one problem but introduces another: the unconditional memcpy() introduced by that commit may overflow the target buffer if the source data is invalid, which could be the result of intentional tampering. So check params.key_size explicitly against the size of the target buffer before validating the key further. Fixes: 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-04crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()Ard Biesheuvel
ecdh_set_secret() casts a void* pointer to a const u64* in order to feed it into ecc_is_key_valid(). This is not generally permitted by the C standard, and leads to actual misalignment faults on ARMv6 cores. In some cases, these are fixed up in software, but this still leads to performance hits that are entirely avoidable. So let's copy the key into the ctx buffer first, which we will do anyway in the common case, and which guarantees correct alignment. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18crypto: run initcalls for generic implementations earlierEric Biggers
Use subsys_initcall for registration of all templates and generic algorithm implementations, rather than module_init. Then change cryptomgr to use arch_initcall, to place it before the subsys_initcalls. This is needed so that when both a generic and optimized implementation of an algorithm are built into the kernel (not loadable modules), the generic implementation is registered before the optimized one. Otherwise, the self-tests for the optimized implementation are unable to allocate the generic implementation for the new comparison fuzz tests. Note that on arm, a side effect of this change is that self-tests for generic implementations may run before the unaligned access handler has been installed. So, unaligned accesses will crash the kernel. This is arguably a good thing as it makes it easier to detect that type of bug. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: ecc - Actually remove stack VLA usageKees Cook
On the quest to remove all VLAs from the kernel[1], this avoids VLAs by just using the maximum allocation size (4 bytes) for stack arrays. All the VLAs in ecc were either 3 or 4 bytes (or a multiple), so just make it 4 bytes all the time. Initialization routines are adjusted to check that ndigits does not end up larger than the arrays. This includes a removal of the earlier attempt at this fix from commit a963834b4742 ("crypto/ecc: Remove stack VLA usage") [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-09crypto: ecdh - fix to allow multi segment scatterlistsJames Bottomley
Apparently the ecdh use case was in bluetooth which always has single element scatterlists, so the ecdh module was hard coded to expect them. Now we're using this in TPM, we need multi-element scatterlists, so remove this limitation. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: ecdh - remove empty exit()Tudor-Dan Ambarus
Pointer members of an object with static storage duration, if not explicitly initialized, will be initialized to a NULL pointer. The crypto API checks if this pointer is not NULL before using it, we are safe to remove the function. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-03crypto: ecdh - fix concurrency on shared secret and pubkeyTudor-Dan Ambarus
ecdh_ctx contained static allocated data for the shared secret and public key. The shared secret and the public key were doomed to concurrency issues because they could be shared by multiple crypto requests. The concurrency is fixed by replacing per-tfm shared secret and public key with per-request dynamically allocated shared secret and public key. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecdh - add privkey generation supportTudor-Dan Ambarus
Add support for generating ecc private keys. Generation of ecc private keys is helpful in a user-space to kernel ecdh offload because the keys are not revealed to user-space. Private key generation is also helpful to implement forward secrecy. If the user provides a NULL ecc private key, the kernel will generate it and further use it for ecdh. Move ecdh's object files below drbg's. drbg must be present in the kernel at the time of calling. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecdh - comply with crypto_kpp_maxsize()Tudor-Dan Ambarus
crypto_kpp_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. nbytes has no sense now, remove it and directly return the maxsize. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - rename ecdh_make_pub_key()Tudor-Dan Ambarus
Rename ecdh_make_pub_key() to ecc_make_pub_key(). ecdh_make_pub_key() is not dh specific and the reference to dh is wrong. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - remove unnecessary castsTudor-Dan Ambarus
ecc software implementation works with chunks of u64 data. There were some unnecessary casts to u8 and then back to u64 for the ecc keys. This patch removes the unnecessary casts. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - remove unused function argumentsTudor-Dan Ambarus
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: kpp, (ec)dh - fix typosTudor-Dan Ambarus
While here, add missing argument description (ndigits). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09crypto: kpp - constify buffer passed to crypto_kpp_set_secret()Eric Biggers
Constify the buffer passed to crypto_kpp_set_secret() and kpp_alg.set_secret, since it is never modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-24crypto: ecdh - make ecdh_shared_secret uniqueStephen Rothwell
There is another ecdh_shared_secret in net/bluetooth/ecc.c Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: ecdh - Add ECDH software supportSalvatore Benedetto
* Implement ECDH under kpp API * Provide ECC software support for curve P-192 and P-256. * Add kpp test for ECDH with data generated by OpenSSL Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>