summaryrefslogtreecommitdiff
path: root/crypto/skcipher.c
AgeCommit message (Collapse)Author
2017-05-18crypto: skcipher - Add missing API setkey checksHerbert Xu
The API setkey checks for key sizes and alignment went AWOL during the skcipher conversion. This patch restores them. Cc: <stable@vger.kernel.org> Fixes: 4e6c3df4d729 ("crypto: skcipher - Add low-level skcipher...") Reported-by: Baozeng <sploving1@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-13crypto: Replaced gcc specific attributes with macros from compiler.hGideon Israel Dsouza
Continuing from this commit: 52f5684c8e1e ("kernel: use macros from compiler.h instead of __attribute__((...))") I submitted 4 total patches. They are part of task I've taken up to increase compiler portability in the kernel. I've cleaned up the subsystems under /kernel /mm /block and /security, this patch targets /crypto. There is <linux/compiler.h> which provides macros for various gcc specific constructs. Eg: __weak for __attribute__((weak)). I've cleaned all instances of gcc specific attributes with the right macros for the crypto subsystem. I had to make one additional change into compiler-gcc.h for the case when one wants to use this: __attribute__((aligned) and not specify an alignment factor. From the gcc docs, this will result in the largest alignment for that data type on the target machine so I've named the macro __aligned_largest. Please advise if another name is more appropriate. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30crypto: skcipher - introduce walksize attribute for SIMD algosArd Biesheuvel
In some cases, SIMD algorithms can only perform optimally when allowed to operate on multiple input blocks in parallel. This is especially true for bit slicing algorithms, which typically take the same amount of time processing a single block or 8 blocks in parallel. However, other SIMD algorithms may benefit as well from bigger strides. So add a walksize attribute to the skcipher algorithm definition, and wire it up to the skcipher walk API. To avoid confusion between the skcipher and AEAD attributes, rename the skcipher_walk chunksize attribute to 'stride', and set it from the walksize (in the skcipher case) or from the chunksize (in the AEAD case). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-14crypto: skcipher - fix crash in virtual walkArd Biesheuvel
The new skcipher walk API may crash in the following way. (Interestingly, the tcrypt boot time tests seem unaffected, while an explicit test using the module triggers it) Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [<ffff000008431d84>] __memcpy+0x84/0x180 [<ffff0000083ec0d0>] skcipher_walk_done+0x328/0x340 [<ffff0000080c5c04>] ctr_encrypt+0x84/0x100 [<ffff000008406d60>] simd_skcipher_encrypt+0x88/0x98 [<ffff0000083fa05c>] crypto_rfc3686_crypt+0x8c/0x98 [<ffff0000009b0900>] test_skcipher_speed+0x518/0x820 [tcrypt] [<ffff0000009b31c0>] do_test+0x1408/0x3b70 [tcrypt] [<ffff0000009bd050>] tcrypt_mod_init+0x50/0x1000 [tcrypt] [<ffff0000080838f4>] do_one_initcall+0x44/0x138 [<ffff0000081aee60>] do_init_module+0x68/0x1e0 [<ffff0000081524d0>] load_module+0x1fd0/0x2458 [<ffff000008152c38>] SyS_finit_module+0xe0/0xf0 [<ffff0000080836f0>] el0_svc_naked+0x24/0x28 This is due to the fact that skcipher_done_slow() may be entered with walk->buffer unset. Since skcipher_walk_done() already deals with the case where walk->buffer == walk->page, it appears to be the intention that walk->buffer point to walk->page after skcipher_next_slow(), so ensure that is the case. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-01crypto: skcipher - Add separate walker for AEAD decryptionHerbert Xu
The AEAD decrypt interface includes the authentication tag in req->cryptlen. Therefore we need to exlucde that when doing a walk over it. This patch adds separate walker functions for AEAD encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2016-11-30crypto: skcipher - fix crash in skcipher_walk_aead()Ard Biesheuvel
The new skcipher_walk_aead() may crash in the following way due to the walk flag SKCIPHER_WALK_PHYS not being cleared at the start of the walk: Unable to handle kernel NULL pointer dereference at virtual address 00000001 [..] Internal error: Oops: 96000044 [#1] PREEMPT SMP [..] PC is at skcipher_walk_next+0x208/0x450 LR is at skcipher_walk_next+0x1e4/0x450 pc : [<ffff2b93b7104e20>] lr : [<ffff2b93b7104dfc>] pstate: 40000045 sp : ffffb925fa517940 [...] [<ffff2b93b7104e20>] skcipher_walk_next+0x208/0x450 [<ffff2b93b710535c>] skcipher_walk_first+0x54/0x148 [<ffff2b93b7105664>] skcipher_walk_aead+0xd4/0x108 [<ffff2b93b6e77928>] ccm_encrypt+0x68/0x158 So clear the flag at the appropriate time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-28crypto: skcipher - Add skcipher walk interfaceHerbert Xu
This patch adds the skcipher walk interface which replaces both blkcipher walk and ablkcipher walk. Just like blkcipher walk it can also be used for AEAD algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18crypto: skcipher - Remove top-level givcipher interfaceHerbert Xu
This patch removes the old crypto_grab_skcipher helper and replaces it with crypto_grab_skcipher2. As this is the final entry point into givcipher this patch also removes all traces of the top-level givcipher interface, including all implicit IV generators such as chainiv. The bottom-level givcipher interface remains until the drivers using it are converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18crypto: skcipher - Add low-level skcipher interfaceHerbert Xu
This patch allows skcipher algorithms and instances to be created and registered with the crypto API. They are accessible through the top-level skcipher interface, along with ablkcipher/blkcipher algorithms and instances. This patch also introduces a new parameter called chunk size which is meant for ciphers such as CTR and CTS which ostensibly can handle arbitrary lengths, but still behave like block ciphers in that you can only process a partial block at the very end. For these ciphers the block size will continue to be set to 1 as it is now while the chunk size will be set to the underlying block size. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-25crypto: skcipher - Add default key size helperHerbert Xu
While converting ecryptfs over to skcipher I found that it needs to pick a default key size if one isn't given. Rather than having it poke into the guts of the algorithm to get max_keysize, let's provide a helper that is meant to give a sane default (just in case we ever get an algorithm that has no maximum key size). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-18crypto: skcipher - Add crypto_skcipher_has_setkeyHerbert Xu
This patch adds a way for skcipher users to determine whether a key is required by a transform. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-01crypto: skcipher - blkcipher and ablkcipher should it be staticGeliang Tang
Fixes the following sparse warnings: crypto/skcipher.c:94:5: warning: symbol 'crypto_init_skcipher_ops_blkcipher' was not declared. Should it be static? crypto/skcipher.c:185:5: warning: symbol 'crypto_init_skcipher_ops_ablkcipher' was not declared. Should it be static? Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21crypto: skcipher - Add top-level skcipher interfaceHerbert Xu
This patch introduces the crypto skcipher interface which aims to replace both blkcipher and ablkcipher. It's very similar to the existing ablkcipher interface. The main difference is the removal of the givcrypt interface. In order to make the transition easier for blkcipher users, there is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place a request on the stack for synchronous transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>