| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it
broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell,
and apparently it is relying on SHA-1 signature support. These UAPIs
are fairly obscure, and their documentation does not mention which
algorithms they support. iwd really should be using a properly
supported userspace crypto library instead. Regardless, since something
broke we have to revert the change.
It may be possible that some parts of this commit can be reinstated
without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but
for now this just does a full revert to get things working again.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove test vectors for CFB/OFB.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Removes support for sha1 signed kernel modules, importing sha1 signed
x.509 certificates.
rsa-pkcs1pad keeps sha1 padding support, which seems to be used by
virtio driver.
sha1 remains available as there are many drivers and subsystems using
it. Note only hmac(sha1) with secret keys remains cryptographically
secure.
In the kernel there are filesystems, IMA, tpm/pcr that appear to be
using sha1. Maybe they can all start to be slowly upgraded to
something else i.e. blake3, ParallelHash, SHAKE256 as needed.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove zlib-deflate test vectors as it no longer exists in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add some test vectors for 128-bit cmac(camellia) as found in
draft-kato-ipsec-camellia-cmac96and128-01 section 6.2.
The document also shows vectors for camellia-cmac-96, and for VK with a
length greater than 16, but I'm not sure how to express those in testmgr.
This also leaves cts(cbc(camellia)) untested, but I can't seem to find any
tests for that that I could put into testmgr.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch newly adds the test vectors of CTS-CBC/XTS/XCBC modes of
the SM4 algorithm, and also added some test vectors for SM4 GCM/CCM.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Two more fixes:
* some test vectors in commit 79e6e2f3f3ff ("crypto: testmgr - populate
RSA CRT parameters in RSA test vectors") had misplaced commas, which
break the test and trigger KASAN warnings at least on x86-64
* pkcs1pad test vector did not have its CRT parameters
Fixes: 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It contains ARIA ecb(aria), cbc(aria), cfb(aria), ctr(aria), and gcm(aria).
ecb testvector is from RFC standard.
cbc, cfb, and ctr testvectors are from KISA[1], who developed ARIA
algorithm.
gcm(aria) is from openssl test vector.
[1] https://seed.kisa.or.kr/kisa/kcmvp/EgovVerification.do (Korean)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Changes from v1:
* replace some accidental spaces with tabs
In commit f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem
for faster private key operations") we have started to use the additional
primes and coefficients for RSA private key operations. However, these
additional parameters are not present (defined as 0 integers) in the RSA
test vectors.
Some parameters were borrowed from OpenSSL, so I was able to find the
source. I could not find the public source for 1 vector though, so had to
recover the parameters by implementing Appendix C from [1].
[1]: https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Br1.pdf
Fixes: f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operations")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
According to PKCS#1 standard, the 'otherPrimeInfos' field contains
the information for the additional primes r_3, ..., r_u, in order.
It shall be omitted if the version is 0 and shall contain at least
one instance of OtherPrimeInfo if the version is 1, see:
https://www.rfc-editor.org/rfc/rfc3447#page-44
Replace the version number '1' with 0, otherwise, some drivers may
not pass the run-time tests.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.
Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.
Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.
Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for HCTR2 as a template. HCTR2 is a length-preserving
encryption mode that is efficient on processors with instructions to
accelerate AES and carryless multiplication, e.g. x86 processors with
AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions.
As a length-preserving encryption mode, HCTR2 is suitable for
applications such as storage encryption where ciphertext expansion is
not possible, and thus authenticated encryption cannot be used.
Currently, such applications usually use XTS, or in some cases Adiantum.
XTS has the disadvantage that it is a narrow-block mode: a bitflip will
only change 16 bytes in the resulting ciphertext or plaintext. This
reveals more information to an attacker than necessary.
HCTR2 is a wide-block mode, so it provides a stronger security property:
a bitflip will change the entire message. HCTR2 is somewhat similar to
Adiantum, which is also a wide-block mode. However, HCTR2 is designed
to take advantage of existing crypto instructions, while Adiantum
targets devices without such hardware support. Adiantum is also
designed with longer messages in mind, while HCTR2 is designed to be
efficient even on short messages.
HCTR2 requires POLYVAL and XCTR as components. More information on
HCTR2 can be found here: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for POLYVAL, an ε-Δ-universal hash function similar to
GHASH. This patch only uses POLYVAL as a component to implement HCTR2
mode. It should be noted that POLYVAL was originally specified for use
in AES-GCM-SIV (RFC 8452), but the kernel does not currently support
this mode.
POLYVAL is implemented as an shash algorithm. The implementation is
modified from ghash-generic.c.
For more information on POLYVAL see:
Length-preserving encryption with HCTR2:
https://eprint.iacr.org/2021/1441.pdf
AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption:
https://datatracker.ietf.org/doc/html/rfc8452
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a generic implementation of XCTR mode as a template. XCTR is a
blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian
addition rather than big-endian arithmetic which has two advantages: It
is slightly faster on little-endian CPUs and it is less likely to be
implemented incorrect since integer overflows are not possible on
practical input sizes. XCTR is used as a component to implement HCTR2.
More information on XCTR mode can be found in the HCTR2 paper:
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
|
|
The result is set in little endian, so the expected digest needs to
be consistent for big endian machines.
Fixes: f3813f4b287e ("crypto: add rocksoft 64b crc guard tag framework")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220322142107.4581-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that the ffdheXYZ(dh) templates support ephemeral key generation, add
->keygen = 1 TVs for each of them to the testmgr.c.
In order to facilitate string merging by the compiler, set party B's secret
and public keys to the ones specified for party A in the respective
existing known answer test. With GCC 7.5 on x86_64, this leads to an
increase of testmgr.o size by less than half a kB.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add known answer tests for the ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh),
ffdhe6144(dh) and ffdhe8192(dh) templates introduced with the previous
patch to the testmgr. All TVs have been generated with OpenSSL.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only current user of the DH KPP algorithm, the
keyctl(KEYCTL_DH_COMPUTE) syscall, doesn't set the domain parameter ->q
in struct dh. Remove it and any associated (de)serialization code in
crypto_dh_encode_key() and crypto_dh_decode_key. Adjust the encoded
->secret values in testmgr's DH test vectors accordingly.
Note that the dh-generic implementation would have initialized its
struct dh_ctx's ->q from the decoded struct dh's ->q, if present. If this
struct dh_ctx's ->q would ever have been non-NULL, it would have enabled a
full key validation as specified in NIST SP800-56A in dh_is_pubkey_valid().
However, as outlined above, ->q is always NULL in practice and the full key
validation code is effectively dead. A later patch will make
dh_is_pubkey_valid() to calculate Q from P on the fly, if possible, so
don't remove struct dh_ctx's ->q now, but leave it there until that has
happened.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
FIPS 140 requires a minimum security strength of 112 bits. This implies
that the HMAC key must not be smaller than 112 in FIPS mode.
This restriction implies that the test vectors for HMAC that have a key
that is smaller than 112 bits must be disabled when FIPS support is
compiled.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
By adding the support for the flag fips_skip, hash / HMAC test vectors
may be marked to be not applicable in FIPS mode. Such vectors are
silently skipped in FIPS mode.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.
The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.
Export the key to file and run the following command to verify the
fix result:
openssl asn1parse -inform DER -in /path/to/key/file
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix wrong test data at testmgr.h, it seems to be caused
by ignoring the last '\0' when calling sizeof.
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The GCM/CCM mode of the SM4 algorithm is defined in the rfc 8998
specification, and the test case data also comes from rfc 8998.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Considering that the HMAC(SHA-512) DRBG is the default DRBG now, a self
test is to be provided.
The test vector is obtained from a successful NIST ACVP test run.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add test vector params for NIST P384, add test vector for
NIST P384 on vector of tests.
Vector param from:
https://datatracker.ietf.org/doc/html/rfc5903#section-3.1
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a comment that p192 will fail to register in FIPS mode.
Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs
and not setting fips_allowed.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Actual data length of the 'secret' is not equal to the 'secret_size'.
Since the 'curve_id' has removed in the 'secret', the 'secret_size'
should subtract the length of the 'curve_id'.
Fixes: 6763f5ea2d9a ("crypto: ecdh - move curve_id of ECDH from ...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This pulls in the NIST P384/256/192 x509 changes.
|
|
Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.
Summary of changes:
* crypto/ecdsa.c
- add ecdsa_nist_p384_init_tfm
- register and unregister P384 tfm
* crypto/testmgr.c
- add test vector for P384 on vector of tests
* crypto/testmgr.h
- add test vector params for P384(sha1, sha224, sha256, sha384
and sha512)
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. crypto and crypto/atmel-ecc:
Move curve id of ECDH from the key into the algorithm name instead
in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.
In other words, nobody is likely to care anymore today, so let's get rid
of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add testmgr test vectors for SM2 algorithm. These vectors come
from `openssl pkeyutl -sign` and libgcrypt.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete the doubled word "from" in multiple places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The whole point of using an AEAD over length-preserving encryption is
that the data is authenticated. However currently the fuzz tests don't
test any inauthentic inputs to verify that the data is actually being
authenticated. And only two algorithms ("rfc4543(gcm(aes))" and
"ccm(aes)") even have any inauthentic test vectors at all.
Therefore, update the AEAD fuzz tests to sometimes generate inauthentic
test vectors, either by generating a (ciphertext, AAD) pair without
using the key, or by mutating an authentic pair that was generated.
To avoid flakiness, only assume this works reliably if the auth tag is
at least 8 bytes. Also account for the rfc4106, rfc4309, and rfc7539esp
algorithms intentionally ignoring the last 8 AAD bytes, and for some
algorithms doing extra checks that result in EINVAL rather than EBADMSG.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In preparation of introducing KPP implementations of Curve25519, import
the set of test cases proposed by the Zinc patch set, but converted to
the KPP format.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As suggested by Eric for the Blake2b implementation contributed by
David, introduce a set of test vectors for Blake2s covering different
digest and key sizes.
blake2s-128 blake2s-160 blake2s-224 blake2s-256
---------------------------------------------------
len=0 | klen=0 klen=1 klen=16 klen=32
len=1 | klen=16 klen=32 klen=0 klen=1
len=7 | klen=32 klen=0 klen=1 klen=16
len=15 | klen=1 klen=16 klen=32 klen=0
len=64 | klen=0 klen=1 klen=16 klen=32
len=247 | klen=16 klen=32 klen=0 klen=1
len=256 | klen=32 klen=0 klen=1 klen=16
Cc: David Sterba <dsterba@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Test vectors for blake2b with various digest sizes. As the algorithm is
the same up to the digest calculation, the key and input data length is
distributed in a way that tests all combinanions of the two over the
digest sizes.
Based on the suggestion from Eric, the following input sizes are tested
[0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the
padded and the non-padded input buffers are tested.
blake2b-160 blake2b-256 blake2b-384 blake2b-512
---------------------------------------------------
len=0 | klen=0 klen=1 klen=32 klen=64
len=1 | klen=32 klen=64 klen=0 klen=1
len=7 | klen=64 klen=0 klen=1 klen=32
len=15 | klen=1 klen=32 klen=64 klen=0
len=64 | klen=0 klen=1 klen=32 klen=64
len=247 | klen=32 klen=64 klen=0 klen=1
len=256 | klen=64 klen=0 klen=1 klen=32
Where key:
- klen=0: empty key
- klen=1: 1 byte value 0x42, 'B'
- klen=32: first 32 bytes of the default key, sequence 00..1f
- klen=64: default key, sequence 00..3f
The unkeyed vectors are ordered before keyed, as this is required by
testmgr.
CC: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added testvectors for the rfc3686(ctr(sm4)) skcipher algorithm
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added testvectors for the ofb(sm4) and cfb(sm4) skcipher algorithms
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added testvectors for the hmac(sm3) ahash authentication algorithm
changes since v1 & v2:
-nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add an additional gcm(aes) test case that triggers the code path in
the new arm64 driver that deals with tail blocks whose size is not
a multiple of the block size, and where the size of the preceding
input is a multiple of 64 bytes.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a test vector for the ESSIV mode that is the most widely used,
i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes
(the latter is used by tcrypt to encapsulate the authenc template
or h/w instantiations of the same)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
