summaryrefslogtreecommitdiff
path: root/drivers/accel
AgeCommit message (Collapse)Author
2024-10-11accel/ivpu: Remove skip of clock own resource ack on SimicsKarol Wachowski
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal was implemented as part of VPU STATUS register and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add test_mode bit to force turboAndrzej Kacprowski
Add new test_mode BIT(9) that forces firmware to enable turbo burst mode. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Make DB_ID and JOB_ID allocations incrementalTomasz Rusinowicz
Save last used ID and use it to limit the possible values for the ID. This should decrease the rate at which the IDs are reused, which will make debugging easier. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Print JSM message result in case of errorKarol Wachowski
Change debug message to error level in case of receiving non-successful result of JSM message. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add auto selection logic for job schedulerJacek Lawrynowicz
Add ivpu_fw_sched_mode_select() function that can select scheduling mode based on HW and FW versions. This prepares for a switch to HWS on selected platforms. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-17-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add one jiffy to bo_wait_ioctl timeout valueKarol Wachowski
Add one jiffy to ensure wait function never times out before intended timeout value, which could happen if absolute timeout value is less than (1s / CONFIG_HZ) in the future. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Allow reading dvfs_mode debugfs fileAndrzej Kacprowski
Make the dvfs_mode read-write to allow checking current mode. Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove 1-tile power up Simics workaroundKarol Wachowski
Previously Simics was not providing workpoint for configurations with 0 tiles enabled, that had to be worked around in the KMD. This got fixed in Simics and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Stop using hardcoded DRIVER_DATEJacek Lawrynowicz
Hardcoded driver date is useless, so use kernel version as a driver date to make identifying .ko file easier. Also allow to pass DRIVER_DATE on build time to allow versioning the driver in case it is built out of the tree. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW version debugfs entryKarol Wachowski
Add debugfs that prints current firmware version string on read. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-12-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Turn on autosuspend on SimicsKarol Wachowski
With recent Simics update DVFS flows using cdyn were fixed and it is possible to enable D0i3/D3 entry flows on autosuspend. Set autosuspend timeout to 100 ms by default on Simics. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLEKarol Wachowski
Follow HW documentation recommendation of 500 ns delay between setting AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power island enabling. Previously this was only done correctly for VPU 4+. VPU 3.7 had the delay added after power island disable where it is not needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add coredump supportKarol Wachowski
Use coredump (if available) to collect FW logs in case of a FW crash. This makes dmesg more readable and allows to collect more log data. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Limit FW version string lengthJacek Lawrynowicz
Limit FW version string, when parsing FW binary, to 256 bytes and always add NULL-terminate it. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-7-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix fw log printingJacek Lawrynowicz
- Fix empty log detection that couldn't work without read_wrap_count - Start printing wrapped log from correct position (log_start) - Properly handle logs that are wrapped multiple times in reference to reader position - Don't add a newline when log buffer is wrapped - Always add a newline after printing a log buffer in case log does not end with one Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor functions in ivpu_fw_log.cJacek Lawrynowicz
Make function names more consistent and (arguably) readable in fw log code. Add fw_log_print_all_in_bo() that remove duplicated code in ivpu_fw_log_print(). Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-5-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Reset fw log on cold bootTomasz Rusinowicz
Add ivpu_fw_log_reset() that resets the read_index of all FW logs on cold boot so logs are properly read. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Rename ivpu_log_level to fw_log_levelJacek Lawrynowicz
Rename module param ivpu_log_level to fw_log_level, so it is clear what log level is actually changed. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-3-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Update VPU FW API headersAndrzej Kacprowski
This commit bumps: - Boot API from 3.24.0 to 3.26.3 - JSM API from 3.16.0 to 3.25.0 Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-24accel/ivpu: Fix a typoAndrew Kreimer
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240909135655.45938-1-algonell@gmail.com
2024-09-19Merge tag 'dma-mapping-6.12-2024-09-19' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - support DMA zones for arm64 systems where memory starts at > 4GB (Baruch Siach, Catalin Marinas) - support direct calls into dma-iommu and thus obsolete dma_map_ops for many common configurations (Leon Romanovsky) - add DMA-API tracing (Sean Anderson) - remove the not very useful return value from various dma_set_* APIs (Christoph Hellwig) - misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reflow dma_supported dma-mapping: reliably inform about DMA support for IOMMU dma-mapping: add tracing for dma-mapping API calls dma-mapping: use IOMMU DMA calls for common alloc/free page calls dma-direct: optimize page freeing when it is not addressable dma-mapping: clearly mark DMA ops as an architecture feature vdpa_sim: don't select DMA_OPS arm64: mm: keep low RAM dma zone dma-mapping: don't return errors from dma_set_max_seg_size dma-mapping: don't return errors from dma_set_seg_boundary dma-mapping: don't return errors from dma_set_min_align_mask scsi: check that busses support the DMA API before setting dma parameters arm64: mm: fix DMA zone when dma-ranges is missing dma-mapping: direct calls for dma-iommu dma-mapping: call ->unmap_page and ->unmap_sg unconditionally arm64: support DMA zone above 4GB dma-mapping: replace zone_dma_bits by zone_dma_limit dma-mapping: use bit masking to check VM_DMA_COHERENT
2024-09-13accel/qaic: Change to use DEFINE_SHOW_ATTRIBUTE macroLonglong Xia
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. No functional change. Signed-off-by: Longlong Xia <xialonglong@kylinos.cn> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240819095816.447096-1-xialonglong@kylinos.cn
2024-08-29dma-mapping: don't return errors from dma_set_max_seg_sizeChristoph Hellwig
A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
2024-08-26accel: Use XArray instead of IDR for minorsMichał Winiarski
Accel minor management is based on DRM (and is also using struct drm_minor internally), since DRM is using XArray for minors, it makes sense to also convert accel. As the two implementations are identical (only difference being the underlying xarray), move the accel_minor_* functionality to DRM. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-15accel/ivpu: Add missing MODULE_FIRMWARE metadataAlexander F. Lent
Modules that load firmware from various paths at runtime must declare those paths at compile time, via the MODULE_FIRMWARE macro, so that the firmware paths are included in the module's metadata. The accel/ivpu driver loads firmware but lacks this metadata, preventing dracut from correctly locating firmware files. Fix it. Fixes: 9ab43e95f922 ("accel/ivpu: Switch to generation based FW names") Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by: Alexander F. Lent <lx@xanderlent.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240709-fix-ivpu-firmware-metadata-v3-1-55f70bba055b@xanderlent.com
2024-06-28Merge tag 'drm-habanalabs-next-2024-06-23' of ↵Dave Airlie
https://github.com/HabanaAI/drivers.accel.habanalabs.kernel into drm-next This tag contains habanalabs driver changes for v6.11. The notable changes are: - uAPI changes: - Use device-name directory in debugfs-driver-habanalabs. - Expose server type in debugfs. - New features and improvements: - Gradual sleep in polling memory macro. - Reduce Gaudi2 MSI-X interrupt count to 128. - Add Gaudi2-D revision support. - Firmware related changes: - Add timestamp to CPLD info. - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error. - Align Gaudi2 interrupt names. - Check for errors after preboot is ready. - Bug fixes and code cleanups: - Move heartbeat work initialization to early init. - Fix a race when receiving events during reset. - Change the heartbeat scheduling point. - Maintainers: - Change habanalabs maintainer and git repo path. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ofir Bitton <obitton@habana.ai> Link: https://patchwork.freedesktop.org/patch/msgid/ZnfIjTH5AYQvPe7n@obitton-vm-u22.habana-labs.com
2024-06-23accel/habanalabs: gradual sleep in polling memory macroDidi Freiman
It’s better to avoid long sleeps right from the beginning of the polling since the data may be available much sooner than the sleep period. Because polling host memory is inexpensive, this change gradually increases the sleep time up to the user-requested period. Signed-off-by: Didi Freiman <dfreiman@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: move heartbeat work initialization to early initTomer Tayar
The device heartbeat work is currently initialized at device_heartbeat_schedule() which is called at the end of hl_device_init(). However hl_device_init() can fail at a previous step, and in such a case, a subsequent call to hl_device_fini() will lead to calling cleanup_resources() and accessing this work uninitialized. As there is no real need to re-initialize this work every time it is rescheduled, move this initialization to device_early_init() to be done once and early enough. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: print timestamp of last PQ heartbeat on EQ heartbeat failureTomer Tayar
The test packet which is sent to FW for the PQ heartbeat is used also as the trigger in FW to send the EQ heartbeat event. Add the time of the last sent packet to the debug info which is printed upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: dump the EQ entries headers on EQ heartbeat failureTomer Tayar
Add a dump of the EQ entries headers upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: revise print on EQ heartbeat failureTomer Tayar
Don't print the "previous EQ index" value in case of a EQ heartbeat failure, because it is incremented along with the EQ CI and therefore redundant. In addition, as the CPU-CP PI is zeroed when it reaches a value that is twice the queue size, add a value of the CI with a similar wrap around, to make it easier to compare the values. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add more info upon cpu pkt timeoutFarah Kassabri
In order to have better debuggability upon encountering FW issues, We are adding additional info once CPU packet timeout expires. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: additional print in device-in-use infoIlia Levi
When device release triggers a hard reset, there is a printout of the cause. Currently listed causes (that increment context refcount) are active command submissions and exported DMA buffer objects. In any other case, the printout emits "unknown reason". We identify and print another reason - allocated command buffers. Signed-off-by: Ilia Levi <illevi@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalbs/gaudi2: reduce interrupt count to 128Ofir Bitton
Some systems allow a maximum number of 128 MSI-X interrupts. Hence we reduce the interrupt count to 128 instead of 512. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: disable EQ interrupt after disabling pciTal Cohen
When sending disable pci msg towards firmware, there is a possibility that an EQ packet is already pending, disabling EQ interrupt will prevent this from happening. The interrupt will be re-enabled after reset. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: change the heartbeat scheduling pointFarah Kassabri
Currently we schedule the heartbeat thread at late init, only then we set the INTS_REGISTER packet which enables events to be received from firmware. Init may take some time and we want to give firmware 2 full cycles of heartbeat thread after it received INTS_REGISTER. The patch will move the heartbeat thread scheduling to be after driver is done with all initializations. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: unsecure edma max outstanding registerRakesh Ughreja
Netowrk EDMAs uses more outstanding transfers so this needs to be programmed by EDMA firmware. Signed-off-by: Rakesh Ughreja <rughreja@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: remove timestamp registration debug printsOfir Bitton
There are several timestamp registration debug prints which spams the kernel log whenever dyn debug is enabled. Remove those prints. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add cpld ts cpld_timestamp cpucpVitaly Margolin
Add cpld_timestamp field to cpucp_info structure and return cpld timestamp as part of cpld version Signed-off-by: Vitaly Margolin <vmargolin@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add a common handler for clock change eventsTomer Tayar
As the new dynamic EQ includes clock change events which are common and not ASIC-specific, add a common handler for these events. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: add GAUDI2D revision supportFarah Kassabri
Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D device and should be detected and initialized as Gaudi2. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: move hl_eq_heartbeat_event_handle() to common codeTomer Tayar
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and therefore can be moved from Gaudi2-only code to common code, and possibly used for other ASICs. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add an EQ size ASIC propertyTomer Tayar
Future supported ASICs might use the dynamic EQ mechanism with the firmware, and in that case the EQ size won't be equal to the default HL_EQ_SIZE_IN_BYTES value. Add an ASIC property to enable overriding this value. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: assume hard-reset by FW upon MC SEI severe errorTomer Tayar
FW initiates a hard reset upon an MC SEI severe error. Align the driver to expect this reset and avoid accessing the device until the reset is done. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: revise return value handling in ↵Tomer Tayar
gaudi2_hbm_sei_handle_read_err() The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not a bitmask, so there is need for "|= true". In addition, rename the 'rc' variable, as no "return code" is returned here but an indication if a hard reset is required. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: align interrupt names to tableAriel Suller
when reporting tpc events, the dcore and tpc in dcore should be reported and propagated, and not the generatl tpc number Signed-off-by: Ariel Suller <asuller@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: check for errors after preboot is readyFarah Kassabri
Driver should check and report any fatal errors detected by preboot, before it attempts to load the boot fit. Some errors may cause the driver to stop the boot process and mark the device as unusable. This check will allow the driver to fail and print the error reported by preboot and skip the time wasting attempt of trying to load the boot fit, which will fail due to the error. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
generated by cgit (git 2.34.1) at 2025-09-21 22:42:29 +0000