summaryrefslogtreecommitdiff
path: root/drivers/acpi/Makefile
AgeCommit message (Collapse)Author
2016-10-03Merge tag 'tty-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big tty and serial patch set for 4.9-rc1. It also includes some drivers/dma/ changes, as those were needed by some serial drivers, and they were all acked by the DMA maintainer. Also in here is the long-suffering ACPI SPCR patchset, which was passed around from maintainer to maintainer like a hot-potato. Seems I was the sucker^Wlucky one. All of those patches have been acked by the various subsystem maintainers as well. All of this has been in linux-next with no reported issues" * tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits) Revert "serial: pl011: add console matching function" MAINTAINERS: update entry for atmel_serial driver serial: pl011: add console matching function ARM64: ACPI: enable ACPI_SPCR_TABLE ACPI: parse SPCR and enable matching console of/serial: move earlycon early_param handling to serial Revert "drivers/tty: Explicitly pass current to show_stack" tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq nios2: dts: 10m50: Add tx-threshold parameter serial: 8250: Set Altera 16550 TX FIFO Threshold serial: 8250: of: Load TX FIFO Threshold from DT Documentation: dt: serial: Add TX FIFO threshold parameter drivers/tty: Explicitly pass current to show_stack serial: imx: Fix DCD reading serial: stm32: mark symbols static where possible serial: xuartps: Add some register initialisation to cdns_early_console_setup() serial: xuartps: Removed unwanted checks while reading the error conditions serial: xuartps: Rewrite the interrupt handling logic serial: stm32: use mapbase instead of membase for DMA tty/serial: atmel: fix fractional baud rate computation ...
2016-10-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement proudly presents: - A rework of the core infrastructure to optimally spread interrupt for multiqueue devices. The first version was a bit naive and failed to take thread siblings and other details into account. Developed in cooperation with Christoph and Keith. - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is active then no further softirq processsing on interrupt return happens. Otherwise we try to delegate and still run another batch of network packets in the irq return path, which then tries to delegate to ksoftirqd ..... - A proper machine parseable sysfs based alternative for /proc/interrupts. - ACPI support for the GICV3-ITS and ARM interrupt remapping - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC - A new irq chip for the JCore (SuperH) - The usual pile of small fixlets in core and irqchip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) softirq: Let ksoftirqd do its job genirq: Make function __irq_do_set_handler() static ARM/dts: Add EXTI controller node to stm32f429 ARM/STM32: Select external interrupts controller drivers/irqchip: Add STM32 external interrupts support Documentation/dt-bindings: Document STM32 EXTI controller bindings irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs pci/msi: Retrieve affinity for a vector genirq/affinity: Remove old irq spread infrastructure genirq/msi: Switch to new irq spreading infrastructure genirq/affinity: Provide smarter irq spreading infrastructure genirq/msi: Add cpumask allocation to alloc_msi_entry genirq: Expose interrupt information through sysfs irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Cleanup for ITS domain initialization PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table ACPI: Add new IORT functions to support MSI domain handling ...
2016-09-28ACPI: parse SPCR and enable matching consoleAleksey Makarov
'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port Console Redirection Table) [2] as a mandatory ACPI table that specifies the configuration of serial console. Defer initialization of DT earlycon until ACPI/DT decision is made. Parse the ACPI SPCR table, setup earlycon if required, enable specified console. Thanks to Peter Hurley for explaining how this should work. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html [2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24ACPI / watchdog: Add support for WDAT hardware watchdogMika Westerberg
Starting from Intel Skylake the iTCO watchdog timer registers were moved to reside in the same register space with SMBus host controller. Not all needed registers are available though and we need to unhide P2SB (Primary to Sideband) device briefly to be able to read status of required NO_REBOOT bit. The i2c-i801.c SMBus driver used to handle this and creation of the iTCO watchdog platform device. Windows, on the other hand, does not use the iTCO watchdog hardware directly even if it is available. Instead it relies on ACPI Watchdog Action Table (WDAT) table to describe the watchdog hardware to the OS. This table contains necessary information about the the hardware and also set of actions which are executed by a driver as needed. This patch implements a new watchdog driver that takes advantage of the ACPI WDAT table. We split the functionality into two parts: first part enumerates the WDAT table and if found, populates resources and creates platform device for the actual driver. The second part is the driver itself. The reason for the split is that this way we can make the driver itself to be a module and loaded automatically if the WDAT table is found. Otherwise the module is not loaded. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-12ACPI: I/O Remapping Table (IORT) initial supportTomasz Nowicki
IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-07-28Merge tag 'libnvdimm-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
2016-07-25Merge branches 'acpi-drivers', 'acpi-misc' and 'acpi-tools'Rafael J. Wysocki
* acpi-drivers: ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver * acpi-misc: ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular * acpi-tools: tools/acpi: use CROSS_COMPILE to define prefix
2016-07-25Merge branch 'acpi-pmic'Rafael J. Wysocki
* acpi-pmic: ACPI / PMIC: remove modular references from non-modular code ACPI / PMIC: intel: initialize result to 0 ACPI / PMIC: intel: add REGS operation region support ACPI / PMIC: Add opregion driver for Intel BXT WhiskeyCove PMIC ACPI / PMIC: modify the pen function signature to take bit field Conflicts: drivers/acpi/Makefile
2016-07-24nfit: move to nfit/ sub-directoryDan Williams
With the arrival of x86-machine-check support the nfit driver will add a (conditionally-compiled) source file. Prepare for this by moving all nfit source to drivers/acpi/nfit/. This is pure code movement, no functional changes. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21ACPI / DPTF: move int340x_thermal.c to the DPTF folderSrinivas Pandruvada
Since DPTF has its own folder under ACPI, move this file also there. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21ACPI / DPTF: Add DPTF power participant driverSrinivas Pandruvada
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) Platform Power Participant device (INT3407) support. This participant is responsible for exposing platform telemetry such as: max_platform_power platform_power_source adapter_rating battery_steady_power charger_type These attributes are presented via sysfs interface under the INT3407 platform device: $ls /sys/bus/platform/devices/INT3407\:00/dptf_power/ adapter_rating_mw battery_steady_power_mw charger_type max_platform_power_mw platform_power_source ` ACPI methods description used in this driver: PMAX: Maximum platform power that can be supported by the battery in mW. PSRC: System charge source, 0x00 = DC 0x01 = AC 0x02 = USB 0x03 = Wireless Charger ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no AC adapter is plugged in. CTYP: Charger Type, Traditional : 0x01 Hybrid: 0x02 NVDC: 0x03 PBSS: Returns max sustained power for battery in milliWatts. The INT3407 also contains _BTS and _BIX objects, which are compliant to ACPI 5.0, specification. Those objects are already used by ACPI battery (PNP0C0A) driver and information about them is exported via Linux power supply class registration. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-11ACPI: Rename configfs.c to acpi_configfs.c to prevent link errorMika Westerberg
If we compile ACPI configfs.c as module it will confuse the linker as it hides symbols from the actual configfs: Kernel: arch/x86/boot/bzImage is ready (#1236) MODPOST 5739 modules ERROR: "configfs_unregister_subsystem" [samples/configfs/configfs_sample.ko] undefined! ERROR: "configfs_register_subsystem" [samples/configfs/configfs_sample.ko] undefined! ERROR: "config_group_init" [samples/configfs/configfs_sample.ko] undefined! ERROR: "config_item_init_type_name" [samples/configfs/configfs_sample.ko] undefined! ERROR: "config_group_init_type_name" [samples/configfs/configfs_sample.ko] undefined! ERROR: "configfs_undepend_item" [fs/ocfs2/cluster/ocfs2_nodemanager.ko] undefined! ... Prevent these by renaming the file to acpi_configfs.c instead. Reported-by: Scott Lawson <scott.lawson@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for configfsOctavian Purdila
Register the ACPI subsystem with configfs. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-24ACPI / PMIC: Add opregion driver for Intel BXT WhiskeyCove PMICBin Gao
This patch adds operation region driver for Intel BXT WhiskeyCove PMIC. The register mapping is done as per the BXT WC data sheet. Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Signed-off-by: Bin Gao <bin.gao@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-10PCI/ACPI: Add generic MCFG table handlingTomasz Nowicki
On ACPI systems that support memory-mapped config space access, i.e., ECAM, the PCI Firmware Specification says the OS can learn where the ECAM space is from either: - the static MCFG table (for non-hotpluggable bridges), or - the _CBA method (for hotpluggable bridges) The current MCFG table handling code cannot be easily generalized owing to x86-specific quirks, which makes it hard to reuse on other architectures. Implement generic MCFG handling from scratch, including: - Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86) - MCFG region lookup for a (domain, bus_start, bus_end) tuple [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-05-16Merge branches 'acpi-numa', 'acpi-tables' and 'acpi-osi'Rafael J. Wysocki
* acpi-numa: ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present * acpi-tables: ACPI / tables: Fix DSDT override mechanism ACPI / tables: Convert initrd table override to table upgrade mechanism ACPI / x86: Cleanup initrd related code ACPI / tables: Move table override mechanisms to tables.c * acpi-osi: ACPI / osi: Collect _OSI handling into one single file ACPI / osi: Cleanup coding style issues before creating a separate OSI source file ACPI / osi: Cleanup OSI handling code to use bool ACPI / osi: Fix default _OSI(Darwin) support ACPI / osi: Add acpi_osi=!! to allow reverting acpi_osi=! ACPI / osi: Cleanup _OSI("Linux") related code before introducing new support ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings Conflicts: drivers/acpi/internal.h
2016-05-05ACPI / osi: Collect _OSI handling into one single fileLv Zheng
_OSI handling code grows giant and it's time to move them into one file. This patch collects all _OSI handling code into one single file. So that we only have the following functions to be used externally: early_acpi_osi_init(): Used by DMI detections; acpi_osi_init(): Used to initialize OSI command line settings and install Linux specific _OSI handler; acpi_osi_setup(): The API that should be used by the external quirks. acpi_osi_is_win8(): The API is used by the external drivers to determine if BIOS supports Win8. CONFIG_DMI is not useful as stub dmi_check_system() can make everything stub because of strip. No functional changes. Tested-by: Lukas Wunner <lukas@wunner.de> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09ACPI: implement Generic Event DeviceSinan Kaya
Generic Event Device described in ACPI 6.1 allows platforms to handle platform interrupts in ACPI ASL statements. It borrows constructs like _EVT from GPIO events. All interrupts are listed in _CRS and the handler is written in _EVT method. Here is an example. Device (GED0) { Name (_HID, "ACPI0013") Name (_UID, 0) Name(_CRS, ResourceTemplate () { Interrupt(ResourceConsumer, Edge, ActiveHigh, Shared, , , ) {123} }) Method (_EVT, 1) { if (Lequal(123, Arg0)) { } } } Wake capability has not been implemented yet. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-16ACPI / scan: AMBA bus probing supportGraeme Gregory
On ARM64 some devices use the AMBA device and not the platform bus for probing so add support for this. Uses a dummy clock for apb_pclk as ACPI does not have a suitable clock representation and to keep the core AMBA bus code unchanged between probing methods. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-12Merge branches 'acpi-pci', 'acpi-irq' and 'acpi-assorted'Rafael J. Wysocki
* acpi-pci: ACPI, PCI, irq: remove redundant check for null string pointer ACPI / PCI: Simplify acpi_penalize_isa_irq() ACPI, PCI, irq: remove interrupt number restriction ACPI, PCI, irq: remove interrupt count restriction * acpi-irq: ACPI / spi: attach GPIO IRQ from ACPI description to SPI device ACPI / gpio: Add irq_type when a GPIO is used as an interrupt ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol * acpi-assorted: ACPI / SBS: fix inconsistent indenting inside if statement ACPI: Fix build errors due objects compiled unconditionally
2015-12-15ACPI / debugger: Add module support for ACPI debuggerLv Zheng
This patch converts AML debugger into a loadable module. Note that, it implements driver unloading at the level dependent on the module reference count. Which means if ACPI debugger is being used by a userspace program, "rmmod acpi_dbg" should result in failure. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-15ACPI / debugger: Add IO interface to access debugger functionalitiesLv Zheng
This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by userspace programs to access ACPICA debugger functionalities. Known issue: 1. IO flush support acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can be used by acpi_dbg module to implement .flush() filesystem operation. While this patch doesn't go that far. It then becomes userspace tool's duty now to flush old commands before executing new batch mode commands. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09ACPI: Fix build errors due objects compiled unconditionallyJavier Martinez Canillas
If the CONFIG_ACPI Kconfig symbol is not enabled and a partial build is attempted, compile errors will happen due missing types and identifiers. This can be easily reproduced with the following commands: $ export CROSS_COMPILE="arm-linux-gnueabihf-" ARCH=arm $ make allmodconfig $ make M=drivers/acpi/ CC drivers/acpi//tables.o drivers/acpi//tables.c:235:3: warning: 'struct acpi_subtable_proc' declared inside parameter list unsigned int max_entries) ^ drivers/acpi//tables.c:235:3: warning: its scope is only this definition or declaration, which is probably not what you want drivers/acpi//tables.c: In function 'acpi_parse_entries_array': drivers/acpi//tables.c:269:4: error: invalid use of undefined type 'struct acpi_subtable_proc' ... scripts/Makefile.build:258: recipe for target 'drivers/acpi//tables.o' failed make[1]: *** [drivers/acpi//tables.o] Error 1 Makefile:1401: recipe for target '_module_drivers/acpi/' failed make: *** [_module_drivers/acpi/] Error 2 This is because objects are tried to be built unconditionally even when CONFIG_ACPI is not enabled. This is usually not a problem since arches' Kconfig sources drivers/acpi/Kconfig directly and also selects ACPI but the Makefile should conditionally build the objects as well to prevent these build errors. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-12ACPI: Introduce CPU performance controls using CPPCAshwin Chaugule
CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'Rafael J. Wysocki
* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses
2015-08-25ACPI: Decouple ACPI idle and ACPI processor driversAshwin Chaugule
This patch introduces a new Kconfig symbol, ACPI_PROCESSOR_IDLE, which is auto selected by architectures which support the ACPI based C states for CPU Idle management. The processor_idle driver in its present form contains declarations specific to X86 and IA64. Since there are no reasonable defaults for other architectures e.g. ARM64, the driver is selected only for X86 or IA64. This helps in decoupling the ACPI processor_driver from the ACPI processor_idle driver which is useful for the upcoming alternative patchwork for controlling CPU Performance (CPPC) and CPU Idle (LPI). Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI: Split out ACPI PSS from ACPI Processor driverAshwin Chaugule
The ACPI processor driver is currently tied too closely to the ACPI P-states (PSS) and other related constructs for controlling CPU performance. The newer ACPI specification (v5.1 onwards) introduces alternative methods to PSS. These new mechanisms are described within each ACPI Processor object and so they need to be scanned whenever a new Processor object is detected. This patch introduces a new Kconfig symbol to allow for finer configurability among the two options for controlling performance states. There is no change in functionality and the option is auto-selected by the architectures which support it. A future commit will introduce support for CPPC: A newer method of controlling CPU performance. The OS is not expected to support CPPC and PSS at the same time, so the Kconfig option lets us make the two mutually exclusive at compile time. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17ACPI / scan: Move sysfs-related device code to a separate fileRafael J. Wysocki
To reduce the size of scan.c and improve the readability of it, move all code related to device sysfs, modalias creation etc. to a new file called device_sysfs.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-29Merge tag 'libnvdimm-for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm subsystem from Dan Williams: "The libnvdimm sub-system introduces, in addition to the libnvdimm-core, 4 drivers / enabling modules: NFIT: Instantiates an "nvdimm bus" with the core and registers memory devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface table). After registering NVDIMMs the NFIT driver then registers "region" devices. A libnvdimm-region defines an access mode and the boundaries of persistent memory media. A region may span multiple NVDIMMs that are interleaved by the hardware memory controller. In turn, a libnvdimm-region can be carved into a "namespace" device and bound to the PMEM or BLK driver which will attach a Linux block device (disk) interface to the memory. PMEM: Initially merged in v4.1 this driver for contiguous spans of persistent memory address ranges is re-worked to drive PMEM-namespaces emitted by the libnvdimm-core. In this update the PMEM driver, on x86, gains the ability to assert that writes to persistent memory have been flushed all the way through the caches and buffers in the platform to persistent media. See memcpy_to_pmem() and wmb_pmem(). BLK: This new driver enables access to persistent memory media through "Block Data Windows" as defined by the NFIT. The primary difference of this driver to PMEM is that only a small window of persistent memory is mapped into system address space at any given point in time. Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access different portions of the media. BLK-mode, by definition, does not support DAX. BTT: This is a library, optionally consumed by either PMEM or BLK, that converts a byte-accessible namespace into a disk with atomic sector update semantics (prevents sector tearing on crash or power loss). The sinister aspect of sector tearing is that most applications do not know they have a atomic sector dependency. At least today's disk's rarely ever tear sectors and if they do one almost certainly gets a CRC error on access. NVDIMMs will always tear and always silently. Until an application is audited to be robust in the presence of sector-tearing the usage of BTT is recommended. Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig, Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox, Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael Wysocki, and Bob Moore" * tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits) arch, x86: pmem api for ensuring durability of persistent memory updates libnvdimm: Add sysfs numa_node to NVDIMM devices libnvdimm: Set numa_node to NVDIMM devices acpi: Add acpi_map_pxm_to_online_node() libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only pmem: flag pmem block devices as non-rotational libnvdimm: enable iostat pmem: make_request cleanups libnvdimm, pmem: fix up max_hw_sectors libnvdimm, blk: add support for blk integrity libnvdimm, btt: add support for blk integrity fs/block_dev.c: skip rw_page if bdev has integrity libnvdimm: Non-Volatile Devices tools/testing/nvdimm: libnvdimm unit test infrastructure libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory nd_btt: atomic sector updates libnvdimm: infrastructure for btt devices libnvdimm: write blk label set libnvdimm: write pmem label set libnvdimm: blk labels and namespace instantiation ...
2015-06-24libnvdimm, nfit: initial libnvdimm infrastructure and NFIT supportDan Williams
A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-19acpi-video-detect: video: Make video_detect code part of the video moduleHans de Goede
This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-26ACPI: move arm64 GSI IRQ model to generic GSI IRQ layerLorenzo Pieralisi
The code deployed to implement GSI linux IRQ numbers mapping on arm64 turns out to be generic enough so that it can be moved to ACPI core code along with its respective config option ACPI_GENERIC_GSI selectable on architectures that can reuse the same code. Current ACPI IRQ mapping code is not integrated in the kernel IRQ domain infrastructure, in particular there is no way to look-up the IRQ domain associated with a particular interrupt controller, so this first version of GSI generic code carries out the GSI<->IRQ mapping relying on the IRQ default domain which is supposed to be always set on a specific architecture in case the domain structure passed to irq_create/find_mapping() functions is missing. This patch moves the arm64 acpi functions that implement the gsi mappings: acpi_gsi_to_irq() acpi_register_gsi() acpi_unregister_gsi() to ACPI core code. Since the generic GSI<->domain mapping is based on IRQ domains, it can be extended as soon as a way to map an interrupt controller to an IRQ domain is implemented for ACPI in the IRQ domain layer. x86 and ia64 code for GSI mappings cannot rely on the generic GSI layer at present for legacy reasons, so they do not select the ACPI_GENERIC_GSI config options and keep relying on their arch specific GSI mapping layer. Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-25ACPI / sleep: Introduce CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORTGraeme Gregory
ACPI 5.1 does not currently support S states for ARM64 hardware but ACPI code will call acpi_target_system_state() and acpi_sleep_init() for device power management, so introduce CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT and select it for x86 and ia64 only to make sleep functions available, and also introduce stub function to allow other drivers to function until S states are defined for ARM64. It will be no functional change for x86 and IA64. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-02-19Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: "Specifics: - Abstract the code and introduce helper functions for all int340x thermal drivers. From: Srinivas Pandruvada. - Reorganize the ACPI LPAT table support code so that it can be shared for both ACPI PMIC driver and int340x thermal driver. - Add support for Braswell in intel_soc_dts thermal driver. - a couple of small fixes/cleanups for step_wise governor and int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal/int340x_thermal: remove unused uuids. thermal: step_wise: spelling fixes thermal: int340x: fix sparse warning Thermal/int340x: LPAT conversion for temperature ACPI / PMIC: Use common LPAT table handling functions ACPI / LPAT: Common table processing functions thermal: Intel SoC DTS: Add Braswell support Thermal/int340x/int3402: Provide notification support Thermal/int340x/processor_thermal: Add thermal zone support Thermal/int340x/int3403: Use int340x thermal API Thermal/int340x/int3402: Use int340x thermal API Thermal/int340x: Add common thermal zone handler
2015-02-10Merge branch 'acpi-resources'Rafael J. Wysocki
* acpi-resources: (23 commits) Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug x86/PCI: Refine the way to release PCI IRQ resources x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation x86/PCI: Fix the range check for IO resources PCI: Use common resource list management code instead of private implementation resources: Move struct resource_list_entry from ACPI into resource core ACPI: Introduce helper function acpi_dev_filter_resource_type() ACPI: Add field offset to struct resource_list_entry ACPI: Translate resource into master side address for bridge window resources ACPI: Return translation offset when parsing ACPI address space resources ACPI: Enforce stricter checks for address space descriptors ACPI: Set flag IORESOURCE_UNSET for unassigned resources ACPI: Normalize return value of resource parser functions ACPI: Fix a bug in parsing ACPI Memory24 resource ACPI: Add prefetch decoding to the address space parser ACPI: Move the window flag logic to the combined parser ACPI: Unify the parsing of address_space and ext_address_space ACPI: Let the parser return false for disabled resources ...
2015-02-06ACPI: add AMD ACPI2Platform device support for x86 systemKen Xue
This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplugJiang Liu
Enable support of IOAPIC hotplug by: 1) reintroducing ACPI based IOAPIC driver 2) enhance pci_root driver to hook hotplug events The ACPI IOAPIC driver is always enabled if all of ACPI, PCI and IOAPIC are enabled. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-19-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-29ACPI / LPAT: Common table processing functionsSrinivas Pandruvada
Since LPAT table processing is also required for other thermal drivers, moved LPAT table related functions from intel PMIC driver (intel_pmic.c) to a stand alonge module with exported interfaces. In this way there will be no code duplication. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-12-08Merge branches 'acpi-video' and 'acpi-pmic'Rafael J. Wysocki
* acpi-video: ACPI / video: Run _BCL before deciding registering backlight * acpi-pmic: ACPI / PMIC: AXP288: support virtual GPIO in ACPI table ACPI / PMIC: support PMIC operation region for XPower AXP288 ACPI / PMIC: support PMIC operation region for CrystalCove iio/axp288_adc: remove THIS_MODULE owner mfd/axp20x: avoid irq numbering collision iio: adc: Add module device table for autoloading iio: adc: Add support for axp288 adc mfd: axp20x: Extend axp20x to support axp288 pmic
2014-11-26ACPI / PMIC: support PMIC operation region for XPower AXP288Aaron Lu
The Baytrail-T-CR platform firmware has defined two customized operation regions for PMIC chip Dollar Cove XPower - one is for power resource handling and one is for thermal just like the CrystalCove one. This patch adds support for them on top of the common PMIC opregion region code. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> for the MFD part Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-26ACPI / PMIC: support PMIC operation region for CrystalCoveAaron Lu
The Baytrail-T platform firmware has defined two customized operation regions for PMIC chip Crystal Cove - one is for power resource handling and one is for thermal: sensor temperature reporting, trip point setting, etc. This patch adds support for them on top of the existing Crystal Cove PMIC driver. The reason to split code into a separate file intel_pmic.c is that there are more PMIC drivers with ACPI operation region support coming and we can re-use those code. The intel_pmic_opregion_data structure is created also for this purpose: when we need to support a new PMIC's operation region, we just need to fill those callbacks and the two register mapping tables. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> for the MFD part Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI: Add support for device specific propertiesMika Westerberg
Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-11ACPI: introduce ACPI int340x thermal scan handlerZhang Rui
Newer laptops and tablets that use ACPI may have thermal sensors and other devices with thermal control capabilities outside the core CPU/SOC, for thermal safety reasons. They are exposed for the OS to use via 1) INT3400 ACPI device object as the master. 2) INT3401 ~ INT340B ACPI device objects as the slaves. This patch introduces a scan handler to enumerate the INT3400 ACPI device object to platform bus, and prevent its slaves from being enumerated before the controller driver being probed. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-21ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDCHanjun Guo
The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC, as ARM platform is supported only in ACPI 5.0 or higher version, _PDC will not be used in ARM platform, so make Make _PDC only for platforms with Intel CPUs. Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in ACPI processor driver into a single file processor_pdc.c, make x86 and ia64 select it when ACPI is enabled. This patch also use pr_* to replace printk to fix the checkpatch warning and factor acpi_processor_alloc_pdc() a little bit to avoid duplicate pr_err() code. Suggested-by: Robert Richter <rric@kernel.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-30ACPI / scan: always register ACPI LPSS scan handlerRafael J. Wysocki
Prevent platform devices from being created for ACPI LPSS devices if CONFIG_X86_INTEL_LPSS is unset by compiling out the LPSS scan handler's callbacks only in that case and still compiling its device ID list in and registering the scan handler in either case. This change is based on a prototype from Zhang Rui. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30ACPI / scan: always register memory hotplug scan handlerRafael J. Wysocki
Prevent platform devices from being created for ACPI memory device objects if CONFIG_ACPI_HOTPLUG_MEMORY is unset by compiling out the memory hotplug scan handler's callbacks only in that case and still compiling its device ID list in and registering the scan handler in either case. Also unset the memory hotplug scan handler's .attach() callback if acpi_no_memhotplug is set, but still register the scan handler to avoid creating platform devices for ACPI memory devices in that case too. This change is based on a prototype from Zhang Rui. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30ACPI / scan: always register container scan handlerRafael J. Wysocki
Prevent platform devices from being created for ACPI containers if CONFIG_ACPI_CONTAINER is unset by compiling out the container scan handler's callbacks only in that case and still compiling its device ID list in and registering the scan handler in either case. This change is based on a prototype from Zhang Rui. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30ACPI / PNP: use device ID list for PNPACPI device enumerationZhang Rui
ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-06ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"Lan Tianyu
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery directory and breaks some old userspace tools. This patch is to revert 7d7ee95. Fixes: 7d7ee958867a (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c) Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>