summaryrefslogtreecommitdiff
path: root/drivers/acpi/bus.c
AgeCommit message (Collapse)Author
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-07-20ACPICA: Tables: Change table duplication check to be related to ↵Lv Zheng
acpi_gbl_verify_table_checksum ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918 acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table() is prepared for the same purpose. So this patch combines them together using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3d837b5d Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-10Merge branches 'acpi-spcr', 'acpi-osi', 'acpi-bus', 'acpi-scan' and 'acpi-misc'Rafael J. Wysocki
* acpi-spcr: ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata ACPI: SPCR: Use access width to determine mmio usage * acpi-osi: ACPI / osi: Make local function acpi_osi_dmi_linux() static * acpi-bus: ACPI / bus: handle ACPI hotplug schedule errors completely * acpi-scan: ACPI / scan: Indicate to platform when hot remove returns busy * acpi-misc: ACPI / DPTF: constify attribute_group structures ACPI / LPSS: constify attribute_group structures ACPI: BGRT: constify attribute_group structures ACPI / power: constify attribute_group structures
2017-07-04ACPI / bus: handle ACPI hotplug schedule errors completelyLee, Chun-Yi
Kernel should decrements the reference count of ACPI device when the scheduling of ACPI hotplug work failed, and evaluates _OST to notify BIOS the failure. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-07ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()Andy Shevchenko
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-05ACPI / bus: Switch to use new generic UUID APIAndy Shevchenko
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-27ACPI / bus: Introduce a list of ids for "always present" devicesHans de Goede
Several Bay / Cherry Trail devices (all of which ship with Windows 10) hide the LPSS PWM controller in ACPI, typically the _STA method looks like this: Method (_STA, 0, NotSerialized) // _STA: Status { If (OSID == One) { Return (Zero) } Return (0x0F) } Where OSID is some dark magic seen in all Cherry Trail ACPI tables making the machine behave differently depending on which OS it *thinks* it is booting, this gets set in a number of ways which we cannot control, on some newer machines it simple hardcoded to "One" aka win10. This causes the PWM controller to get hidden, which means Linux cannot control the backlight level on cht based tablets / laptops. Since loading the driver for this does no harm (the only in kernel user of it is the i915 driver, which will only uses it when it needs it), this commit makes acpi_bus_get_status() always set status to ACPI_STA_DEFAULT for the LPSS PWM device, fixing the lack of backlight control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [ rjw: Rename the new file to utils.c ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-11Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"Dou Liyang
Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-07ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()Dan O'Donovan
When using devicetree stuff like i2c_client.name or spi_device.modalias is initialized to the first DT compatible id with the vendor prefix stripped. Since some drivers rely on this try to replicate it when using ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-22Merge branches 'acpica' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
2016-12-21ACPI / osl: Remove deprecated ↵Lv Zheng
acpi_get_table_with_size()/early_acpi_os_unmap_memory() Since all users are cleaned up, remove the 2 deprecated APIs due to no users. As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap is renamed to acpi_permanent_mmap to have a consistent coding style across entire Linux ACPI subsystem. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIOTim Chen
Rename CONFIG_SCHED_ITMT for Intel Turbo Boost Max Technology 3.0 to CONFIG_SCHED_MC_PRIO. This makes the configuration extensible in future to other architectures that wish to similarly establish CPU core priorities support in the scheduler. The description in Kconfig is updated to reflect this change with added details for better clarity. The configuration is explicitly default-y, to enable the feature on CPUs that have this feature. It has no effect on non-TBM3 CPUs. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Cc: jolsa@redhat.com Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/2b2ee29d93e3f162922d72d0165a1405864fbb23.1480444902.git.tim.c.chen@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-24acpi/bus: Set _OSC for diverse core supportSrinivas Pandruvada
Set the OSC_SB_CPC_DIVERSE_HIGH_SUPPORT (bit 12) to enable diverse core support. This is required to enable the BIOS support of the Intel Turbo Boost Max Technology 3.0 feature. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bp@suse.de Link: http://lkml.kernel.org/r/a023623a727e86040a1715797055f6402caefd7e.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-24acpi/bus: Enable HWP CPPC objectsSrinivas Pandruvada
Need to set platform wide _OSC bits to enable CPPC and CPPC version 2. If platform supports CPPC, then BIOS exposes CPPC tables. The primary reason to enable CPPC support is to get the maximum performance of each CPU to check and enable Intel Turbo Boost Max Technology 3.0 (ITMT). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bp@suse.de Link: http://lkml.kernel.org/r/a696f6b17843cee9a542482fae6abab087be9587.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement proudly presents: - A rework of the core infrastructure to optimally spread interrupt for multiqueue devices. The first version was a bit naive and failed to take thread siblings and other details into account. Developed in cooperation with Christoph and Keith. - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is active then no further softirq processsing on interrupt return happens. Otherwise we try to delegate and still run another batch of network packets in the irq return path, which then tries to delegate to ksoftirqd ..... - A proper machine parseable sysfs based alternative for /proc/interrupts. - ACPI support for the GICV3-ITS and ARM interrupt remapping - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC - A new irq chip for the JCore (SuperH) - The usual pile of small fixlets in core and irqchip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) softirq: Let ksoftirqd do its job genirq: Make function __irq_do_set_handler() static ARM/dts: Add EXTI controller node to stm32f429 ARM/STM32: Select external interrupts controller drivers/irqchip: Add STM32 external interrupts support Documentation/dt-bindings: Document STM32 EXTI controller bindings irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs pci/msi: Retrieve affinity for a vector genirq/affinity: Remove old irq spread infrastructure genirq/msi: Switch to new irq spreading infrastructure genirq/affinity: Provide smarter irq spreading infrastructure genirq/msi: Add cpumask allocation to alloc_msi_entry genirq: Expose interrupt information through sysfs irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Cleanup for ITS domain initialization PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table ACPI: Add new IORT functions to support MSI domain handling ...
2016-10-03Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: "The main changes are: - Persistent CPU/node numbering across CPU hotplug/unplug events. This is a pretty involved series of changes that first fetches all the information during bootup and then uses it for the various hotplug/unplug methods. (Gu Zheng, Dou Liyang) - IO-APIC hot-add/remove fixes and enhancements. (Rui Wang) - ... various fixes, cleanups and enhancements" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/apic: Fix silent & fatal merge conflict in __generic_processor_info() acpi: Fix broken error check in map_processor() acpi: Validate processor id when mapping the processor acpi: Provide mechanism to validate processors in the ACPI tables x86/acpi: Set persistent cpuid <-> nodeid mapping when booting x86/acpi: Enable MADT APIs to return disabled apicids x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping x86/acpi: Enable acpi to register all possible cpus at boot time x86/numa: Online memory-less nodes at boot time x86/apic: Get rid of apic_version[] array x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq() x86/ioapic: Ignore root bridges without a companion ACPI device x86/apic: Update comment about disabling processor focus x86/smpboot: Check APIC ID before setting up default routing x86/ioapic: Fix IOAPIC failing to request resource x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd x86/ioapic: Fix setup_res() failing to get resource x86/ioapic: Support hot-removal of IOAPICs present during boot x86/ioapic: Change prototype of acpi_ioapic_add() x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries ...
2016-09-26ACPI / bus: Adjust ACPI subsystem initialization for new table loading modeLv Zheng
This patch enables the following initialization order for the new table loading mode (which is enabled by setting acpi_gbl_parse_table_as_term_list to TRUE): 1. Install default region handlers (SystemMemory, SystemIo, PciConfig, EmbeddedControl via ECDT) without evaluating _REG; 2. Load the table and execute the module level AML opcodes instantly. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-21x86/acpi: Set persistent cpuid <-> nodeid mapping when bootingGu Zheng
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 4. This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled processors at boot time via an additional acpi namespace walk for processors. [ tglx: Remove the unneeded exports ] Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-6-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-12ACPI: I/O Remapping Table (IORT) initial supportTomasz Nowicki
IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-25Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'Rafael J. Wysocki
* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot
2016-07-25Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'Rafael J. Wysocki
* acpi-bus: ACPI / bus: Support for platform initiated graceful shutdown ACPI / bus: Correct the comments about acpi_subsystem_init() ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error() * acpi-pci: ACPI / PCI: make pci_slot explicitly non-modular ACPI / PCI: pci_slot: Use generic pr_debug utility ACPI / PCI: pci_slot: Use more common logging style * acpica: ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel * acpi-doc: ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation
2016-07-21ACPI / processor_idle: Add support for Low Power Idle(LPI) statesSudeep Holla
ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for ACPI reconfiguration notifiersOctavian Purdila
Add support for ACPI reconfiguration notifiers to allow subsystems to react to changes in the ACPI tables that happen after the initial enumeration. This is similar with the way dynamic device tree notifications work. The reconfigure notifications supported for now are device add and device remove. Since ACPICA allows only one table notification handler, this patch makes the table notifier function generic and moves it out of the sysfs specific code. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06ACPI / bus: Support for platform initiated graceful shutdownPrakash, Prashanth
This patch adds support for platform initited graceful shutdown as described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec The OSPM will get a graceful shutdown request via a Notify operator on \_SB device with a value of 0x81 per section 5.6.6. Following the shutdown request from platform the OSPM needs to follow the processing sequence as described in section 6.2.5.1. v3 * Switched to regular work with delays from delayed work * Dropped changes to actypes.h * Small style changes v2 * Switched from standalone driver to a simple notify handler v1 * Initial Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06ACPI / bus: Correct the comments about acpi_subsystem_init()Baoquan He
In acpi_subsystem_init(), function acpi_enable_subsystem() is called to do the real job. However with different flags passed to acpi_enable_subsystem(), different code is executed. In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it will only switch over the platform to the ACPI mode. The remaining part of acpi_enable_subsystem() is done when acpi_bus_init() is called. So the comments above acpi_subsystem_init() is not exact, change it here. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error()Rafael J. Wysocki
acpi_print_osc_error() basically duplicates the functionalit of acpi_handle_debug(), so use that one in there. While at it, convert the explicit KERN_DEBUG prints to pr_debug() (and apply it to continuation messages too). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-07ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT ECLv Zheng
According to the Windows probing result, during the table loading, the EC device described in the ECDT should be used. And the ECDT EC is also effective during the period the namespace objects are initialized (we can see a separate process executing _STA/_INI on Windows before executing other device specific control methods, for example, EC._REG). During the device enumration, the EC device described in the DSDT should be used. But there are differences between Linux and Windows around the device probing order. Thus in Linux, we should enable the DSDT EC as early as possible before enumerating devices in order not to trigger issues related to the device enumeration order differences. This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to fix the gap. This also fixes a user reported regression triggered after we switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant. Fixes: 59f0aa9480cf (ACPI 2.0 / ECDT: Remove early namespace reference from EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261 Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09ACPI 2.0 / ECDT: Enable correct ECDT initialization orderLv Zheng
With wrong ECDT fixes reverted, it is possible to put ECDT probing before acpi_enable_subsystem(). But the ultimate purpose of ECDT re-enabling is to put the ECDT probing before the namespace initialization (acpi_load_tables()). This patch achieves this with protections so that we can enable it later when all necessary corrections are upstreamed. Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-02Merge branch 'acpi-processor'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-03-26ACPI / processor: Request native thermal interrupt handling via _OSCSrinivas Pandruvada
There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-16ACPI: introduce a function to find the first physical deviceAleksey Makarov
Factor out the code that finds the first physical device of a given ACPI device. It is used in several places. Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-12Merge branches 'acpi-scan', 'acpi-bus', 'acpi-osl' and 'acpi-pm'Rafael J. Wysocki
* acpi-scan: ACPI: Fix white space in a structure definition ACPI / utils: Add acpi_dev_present() ACPI / scan: Fix acpi_bus_id_list bookkeeping ACPI / scan: set status to 0 if _STA failed * acpi-bus: ACPI / bus: Show _OSC UUID when _OSC fails ACPI / bus: Tidy up _OSC error spacing * acpi-osl: ACPI / OSL: Add kerneldoc comments to memory mapping functions * acpi-pm: ACPI / PM: Support D3 COLD device in old BIOS for ZPODD
2015-12-22ACPI / bus: Show _OSC UUID when _OSC failsAndy Lutomirski
When _OSC fails and especially when it fails due to an invalid UUID, it's helpful to show the UUID that we tried. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-22ACPI / bus: Tidy up _OSC error spacingAndy Lutomirski
The whitespace in _OSC error reports is weird. Improve it. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-15ACPI / debugger: Add module support for ACPI debuggerLv Zheng
This patch converts AML debugger into a loadable module. Note that, it implements driver unloading at the level dependent on the module reference count. Which means if ACPI debugger is being used by a userspace program, "rmmod acpi_dbg" should result in failure. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-15ACPI / debugger: Add IO interface to access debugger functionalitiesLv Zheng
This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by userspace programs to access ACPICA debugger functionalities. Known issue: 1. IO flush support acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can be used by acpi_dbg module to implement .flush() filesystem operation. While this patch doesn't go that far. It then becomes userspace tool's duty now to flush old commands before executing new batch mode commands. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED()Sudeep Holla
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it with IS_ENABLED(). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI / bus: Move duplicate code to a separate new function mfd: Add support for Intel Sunrisepoint LPSS devices dmaengine: add a driver for Intel integrated DMA 64-bit mfd: make mfd_remove_devices() iterate in reverse order driver core: implement device_for_each_child_reverse() klist: implement klist_prev() Driver core: wakeup the parent device before trying probe ACPI / PM: Attach ACPI power domain only once PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Update the copyright notice and description of power.c
2015-09-01Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'Rafael J. Wysocki
* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses
2015-08-06ACPI / bus: Move duplicate code to a separate new functionRafael J. Wysocki
After merging commit 712e960f0ee9 (ACPI / PM: Attach ACPI power domain only once) with commit 1dcc3d3362b0 (ACPI / bus: Move ACPI bus type registration) there is some duplicate code in acpi_device_is_first_physical_node() and acpi_companion_match() that can be moved to a separate routine and called from both places. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
2015-07-29Merge branch 'acpi-scan' into acpi-pmRafael J. Wysocki
Conflicts: drivers/acpi/scan.c The conflict is resolved by moving the just introduced acpi_device_is_first_physical_node() to bus.c and using the existing acpi_companion_match() from there. There will be an additional commit to combine the two.
2015-07-17ACPI / bus: Move ACPI bus type registrationRafael J. Wysocki
Move the registration of the ACPI bus type to acpi_bus_init() and avoid using ACPI going forward if it fails (too many things depend on the presence of the ACPI bus type). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17ACPI / scan: Move bus operations and notification routines to bus.cRafael J. Wysocki
To reduce the size of scan.c and improve the readability of it, move code related to device notification, the definitions of the ACPI bus operations and the driver management code to drivers/acpi/bus.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17ACPI / scan: Move device matching code to bus.cRafael J. Wysocki
To reduce the size of scan.c and improve the readability of it, move code related device matching into drivers/acpi/bus.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08ACPI: Remove FSF mailing addressesJarkko Nikula
There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-10ACPI / init: Switch over platform to the ACPI mode laterRafael J. Wysocki
Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-03-26ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsiHanjun Guo
Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is used, and then register device's gsi with the core IRQ subsystem. acpi_register_gsi() is similar to DT based irq_of_parse_and_map(), since gsi is unique in the system, so use hwirq number directly for the mapping. We are going to implement stacked domains when GICv2m, GICv3, ITS support are added. CC: Marc Zyngier <marc.zyngier@arm.com> Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Yijing Wang <wangyijing@huawei.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Timur Tabi <timur@codeaurora.org> Tested-by: Robert Richter <rrichter@cavium.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-09-15ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()Bjorn Helgaas
Revert parts of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug"). A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") added equivalent functionality implemented in a different way for both acpiphp and pciehp. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Rajat Jain <rajatxjain@gmail.com>
2014-07-20ACPICA: Linux: Add stub support for Linux specific variables and functions.Lv Zheng
There are global variables and functions not upstreamed to the ACPICA code base. Such symbols still can be referenced by external users as they are listed in the acpixf.h. This patch uses ACPI_GLOBAL and ACPI_EXTERNAL_RETURN_STATUS mechanism to add stub support for such symbols. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-03Merge branch 'acpica'Rafael J. Wysocki
* acpica: (63 commits) ACPICA: Namespace: Remove _PRP method support. ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPICA: acpidump: Fix repetitive table dump in -n mode. ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem. ACPICA: Clean up redudant definitions already defined elsewhere ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h> ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h> ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages. ACPICA: Update version to 20140424. ACPICA: Comment/format update, no functional change. ACPICA: Events: Update GPE handling and initialization code. ACPICA: Remove extraneous error message for large number of GPEs. ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries. ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT. ACPICA: acpidump: Add support to force using RSDT. ACPICA: Back port of improvements on exception code. ACPICA: Back port of _PRP update. ACPICA: acpidump: Fix truncated RSDP signature validation. ACPICA: Linux header: Add support for stubbed externals. ...