summaryrefslogtreecommitdiff
path: root/drivers/acpi/proc.c
AgeCommit message (Collapse)Author
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-28ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flagsRafael J. Wysocki
The run_wake flag in struct acpi_device_wakeup_flags stores the information on whether or not the device can generate wakeup signals at run time, but in ACPI that really is equivalent to being able to generate wakeup signals at all. In fact, run_wake will always be set after successful executeion of acpi_setup_gpe_for_wake(), but if that fails, the device will not be able to use a wakeup GPE at all, so it won't be able to wake up the systems from sleep states too. Hence, run_wake actually means that the device is capable of triggering wakeup and so it is equivalent to the valid flag. For this reason, drop run_wake from struct acpi_device_wakeup_flags and make sure that the valid flag is only set if acpi_setup_gpe_for_wake() has been successful. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-15ACPI: change acpi_sleep_proc_init() to return voidRami Rosen
This patch changes the type of the return value of the acpi_sleep_proc_init() method to be void, as this method never fails and its return value is never used. Signed-off-by: Rami Rosen <ramirose@gmail.com>\ [ rjw : Fixed up the static inline stub ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-05ACPI / proc: remove unneeded NULL checkDan Carpenter
We already verified that "ldev" was non-NULL earlier and also we dereference again without checking a three lines later. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06ACPI / proc: Include appropriate header file in proc.cRashika
Include appropriate header file internal.h in proc.c because function acpi_sleep_proc_init() has its prototype declaration in internal.h. This eliminates the following warning in proc.c: drivers/acpi/proc.c:148:12: warning: no previous prototype for ‘acpi_sleep_proc_init’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-12ACPI / proc: Remove alarm proc fileLan Tianyu
Alarm proc file provides the info and control of RTC-CMOS alarm and RTC CMOS driver provides wakealarm sysfs attribute for the same purpose. The alarm file isn't compiled into kernel when RTC CMOS driver is selected. The driver is default to be selected for x86 platform. So alarm file is default not to include. This patch is to remove it to prepare remove /proc/acpi directory. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-06ACPI / PM: Walk physical_node_list under physical_node_lockRafael J. Wysocki
The list of physical devices corresponding to an ACPI device object is walked by acpi_system_wakeup_device_seq_show() and physical_device_enable_wakeup() without taking that object's physical_node_lock mutex. Since each of those functions may be run at any time as a result of a user space action, the lack of appropriate locking in them may lead to a kernel crash if that happens during device hot-add or hot-remove involving the device object in question. Fix the issue by modifying acpi_system_wakeup_device_seq_show() and physical_device_enable_wakeup() to use physical_node_lock as appropriate. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: All <stable@vger.kernel.org>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-27ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parentAndreas Fleig
Fix /proc/acpi/wakeup for devices without bus or parent This patch fixes printing the wakeup status for devices without a bus or parent, such as laptop lid switches and sleep buttons. These devices have an empty physical_node_list, because acpi_bind_one is never run for them. [rjw: White space and coding style.] Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-22ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()Cyril Roelandt
The LEN variable is unsigned, therefore checking whether it is less than 0 is useless. Also drop the LEN variable, since the COUNT parameter can be used instead. [rjw: Changed the subject.] Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-09-21ACPI: Allow ACPI binding with USB-3.0 hubLan Tianyu
A USB port's position and connectability can't be identified on some boards via USB hub registers. ACPI _UPC and _PLD can help to resolve this issue and so it is necessary to bind USB with ACPI. This patch is to allow ACPI binding with USB-3.0 hub. Current ACPI only can bind one struct-device to one ACPI device node. This can not work with USB-3.0 hub, because the USB-3.0 hub has two logical devices. Each works for USB-2.0 and USB-3.0 devices. In the Linux USB subsystem, those two logical hubs are treated as two seperate devices that have two struct devices. But in the ACPI DSDT, these two logical hubs share one ACPI device node. So there is a requirement to bind multi struct-devices to one ACPI device node. This patch is to resolve such problem. Following is the ACPI device nodes' description under xhci hcd. Device (XHC) Device (RHUB) Device (HSP1) Device (HSP2) Device (HSP3) Device (HSP4) Device (SSP1) Device (SSP2) Device (SSP3) Device (SSP4) Topology in the Linux device XHC USB-2.0 logical hub USB-3.0 logical hub HSP1 SSP1 HSP2 SSP2 HSP3 SSP3 HSP4 SSP4 This patch also modifies the output of /proc/acpi/wakeup. One ACPI node can be associated with multiple devices: XHC S4 *enabled pci:0000:00:14.0 RHUB S0 disabled usb:usb1 disabled usb:usb2 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-10-31acpi: add export.h to files using THIS_MODULE/EXPORT_SYMBOLPaul Gortmaker
These files were relying on module.h to come in via the path in an include/acpi header file, but we don't want to have instances of module.h being included from include/* files if it can be avoided. Have the files include export.h instead. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-01-07ACPI / PM: Use device wakeup flags for handling ACPI wakeup devicesRafael J. Wysocki
There are ACPI devices (buttons and the laptop lid) that can wake up the system from sleep states and have no "physical" companion devices. The ACPI subsystem uses two flags, wakeup.state.enabled and wakeup.flags.always_enabled, for handling those devices, but they are not accessible through the standard device wakeup infrastructure. User space can only control them via the /proc/acpi/wakeup interface that is not really convenient (e.g. the way in which devices are enabled to wake up the system is not portable between different systems, because it requires one to know the devices' "names" used in the system's ACPI tables). To address this problem, use standard device wakeup flags instead of the special ACPI flags for handling those devices. In particular, use device_set_wakeup_capable() to mark the ACPI wakeup devices during initialization and use device_set_wakeup_enable() to allow or disallow them to wake up the system from sleep states. Rework the /proc/acpi/wakeup interface to take these changes into account. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07ACPI / PM: Do not enable multiple devices to wake up simultaneouslyRafael J. Wysocki
If a device is enabled to wake up the system from sleep states via /proc/acpi/wakeup and there are other devices associated with the same wakeup GPE, all of these devices are automatically enabled to wake up the system. This isn't correct, because the fact the GPE is shared need not imply that wakeup power has to be enabled for all the devices at the same time (i.e. it is possible that one device will have its wakeup power enabled and it will wake up the system from a sleep state if the shared wakeup GPE is enabled, while another device having its wakeup power disabled will not wake up the system even though the GPE is enabled). Rework acpi_system_write_wakeup_device() so that it only enables wakeup for one device at a time. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: remove deprecated ACPI procfs I/FZhang Rui
Rmove deprecated ACPI procfs I/F, including /proc/acpi/debug_layer /proc/acpi/debug_level /proc/acpi/info /proc/acpi/dsdt /proc/acpi/fadt /proc/acpi/sleep because the sysfs I/F is already available and has been working well for years. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-02-04Fix misspellings of "separate" in strings.Adam Buchbinder
Some string messages misspell "separate"; this fixes them. No change in functionality. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-28ACPI: clean up video.c boundary checks and typesArjan van de Ven
proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-03ACPI: Fix bound checks for copy_from_user in the acpi /proc codeArjan van de Ven
The ACPI /proc write() code takes an unsigned length argument like any write() function, but then assigned it to a *signed* integer called "len". Only after this is a sanity check for len done to make it not larger than 4. Due to the type change a len < 0 is in principle also possible; this patch adds a check for this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07ACPI: convert acpi_device_lock spinlock to mutexShaohua Li
Convert acpi_device_lock to a mutex to avoid a potential race upon access to /proc/acpi/wakeup Delete the lock entirely in wakeup.c since it is not necessary (and can not sleep) Found-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_sleep_proc_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_sleep_proc_init() directly. Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7), apparently to make sure that the /proc hierarchy already exists: 2003/02/13 12:38:03-06:00 mochel acpi sleep: demote sleep proc file creation. - Make acpi_sleep_proc_init() a late_initcall(), and not called from acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at least there when we create the dang file. This should no longer be an issue because acpi_bus_init() (called early in acpi_init()) creates acpi_root_dir (/proc/acpi). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09Merge branch 'alarm' into releaseLen Brown
2009-01-09ACPICA: create acpica/ directoryLen Brown
also, delete sleep/ and delete ACPI_CFLAGS from Makefile Signed-off-by: Len Brown <len.brown@intel.com>