summaryrefslogtreecommitdiff
path: root/drivers/acpi/utils.c
AgeCommit message (Collapse)Author
2016-07-19nfit: make DIMM DSMs optionalDan Williams
Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions implemented" attempted to fix a QEMU regression by supporting its usage of a zero-mask as a valid response to a DSM-family probe request. However, this behavior breaks HP platforms that return a zero-mask by default causing the probe to misidentify the DSM-family. Instead, the QEMU regression can be fixed by simply not requiring the DSM family to be identified. This effectively reverts commit 4995734e973a, and removes the DSM requirement from the init path. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-24acpi, nfit: fix acpi_check_dsm() vs zero functions implementedDan Williams
QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on configuration it may only implement the function0 dsm to indicate that no other DSMs are available. Commit 31eca76ba2fc "nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but QEMU is spec compliant. Per the spec the way to indicate that no functions are supported is: If Function Index is zero, the return is a buffer containing one bit for each function index, starting with zero. Bit 0 indicates whether there is support for any functions other than function 0 for the specified UUID and Revision ID. If set to zero, no functions are supported (other than function zero) for the specified UUID and Revision ID. Update the nfit driver to determine the family (interface UUID) without requiring the implementation to define any other functions, i.e. short-circuit acpi_check_dsm() to succeed per the spec. The nfit driver appears to be the only user passing funcs==0 to acpi_check_dsm(), so this behavior change of the common routine should be limited to the probing done by the nfit driver. Cc: Len Brown <lenb@kernel.org> Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Reported-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Tested-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-23Merge tag 'libnvdimm-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this update was stabilized before the merge window and appeared in -next. The "device dax" implementation was revised this week in response to review feedback, and to address failures detected by the recently expanded ndctl unit test suite. Not included in this pull request are two dax topic branches (dax error handling, and dax radix-tree locking). These topics were deferred to get a few more days of -next integration testing, and to coordinate a branch baseline with Ted and the ext4 tree. Vishal and Ross will send the error handling and locking topics respectively in the next few days. This branch has received a positive build result from the kbuild robot across 226 configs. Summary: - Device DAX for persistent memory: Device DAX is the device-centric analogue of Filesystem DAX (CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped without need of an intervening file system. Device DAX is strict, precise and predictable. Specifically this interface: a) Guarantees fault granularity with respect to a given page size (pte, pmd, or pud) set at configuration time. b) Enforces deterministic behavior by being strict about what fault scenarios are supported. Persistent memory is the first target, but the mechanism is also targeted for exclusive allocations of performance/feature differentiated memory ranges. - Support for the HPE DSM (device specific method) command formats. This enables management of these first generation devices until a unified DSM specification materializes. - Further ACPI 6.1 compliance with support for the common dimm identifier format. - Various fixes and cleanups across the subsystem" * tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits) libnvdimm, dax: fix deletion libnvdimm, dax: fix alignment validation libnvdimm, dax: autodetect support libnvdimm: release ida resources Revert "block: enable dax for raw block devices" /dev/dax, core: file operations and dax-mmap /dev/dax, pmem: direct access to persistent memory libnvdimm: stop requiring a driver ->remove() method libnvdimm, dax: record the specified alignment of a dax-device instance libnvdimm, dax: reserve space to store labels for device-dax libnvdimm, dax: introduce device-dax infrastructure nfit: add sysfs dimm 'family' and 'dsm_mask' attributes tools/testing/nvdimm: ND_CMD_CALL support nfit: disable vendor specific commands nfit: export subsystem ids as attributes nfit: fix format interface code byte order per ACPI6.1 nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism nfit, libnvdimm: clarify "commands" vs "_DSMs" libnvdimm: increase max envelope size for ioctl acpi/nfit: Add sysfs "id" for NVDIMM ID ...
2016-04-11acpi: widen acpi_evaluate_dsm() revision and function-index argumentsJerry Hoemann
The ACPI specification states that arguments "Revision ID" and "Function Index" to a _DSM are type "Integer." Type Integers are 64 bit quantities. The function evaluate_dsm specifies these types as simple "int" which are 32 bits. Widen type passed to acpi_evaluate_dsm and its callers and derived callers to pass correct type. acpi_check_dsm and acpi_evaluate_dsm_typed had similar issue and were corrected as well. This is in preparation for libnvdimm implementing a generic _DSM passthrough facility to have the capacity to pass 64-bit values as the ACPI specification allows. [djbw: clarify the changelog, add rationale] Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-09ACPI / utils: Rename acpi_dev_present()Lukas Wunner
acpi_dev_present() was originally named after pci_dev_present() to signify the similarity of the two functions. However Rafael J. Wysocki pointed out that the exported function acpi_dev_present() is easily confused with the non-exported acpi_device_is_present(). Additionally in ACPI parlance the term "present" usually refers to the "device is present" bit returned by the _STA control method, yet acpi_dev_present() merely checks presence in the namespace. It does not invoke _STA at all, let alone check the "device is present" bit. As suggested by Rafael, rename the function to acpi_dev_found() and adjust all existing call sites. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-22ACPI / util: cast data to u64 before shifting to fix sign extensionColin Ian King
obj->buffer.pointer[i] should be cast to u64 to prevent an unintentional sign extension. For example, if pointer[7] is 0x80, then the value 0xffffffffff000000 is or'd into mask rather than the intended value 0xff00000000000000 Detected with static analysis by CoverityScan Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09ACPI / util: remove redundant check if element is NULLColin Ian King
element is &package->package.elements[i] which can never be NULL so the check to see if it is NULL is redundant and can be removed. Detected with static analysis by CoverityScan Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09ACPI / utils: Add acpi_dev_present()Lukas Wunner
There's an idiom in use by 7 Linux drivers to detect the presence of a particular ACPI HID by walking the namespace with acpi_get_devices(). The callback passed to acpi_get_devices() is mostly identical across the drivers, leading to lots of duplicate code. Add acpi_dev_present(), the ACPI equivalent to pci_dev_present(), allowing us to deduplicate all that boilerplate in the drivers. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08ACPI: Remove FSF mailing addressesJarkko Nikula
There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: video: Make video_detect code part of the video moduleHans de Goede
This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-12ACPI / utils: Drop error messages from acpi_evaluate_reference()Rafael J. Wysocki
Some of the error messages printed by acpi_evaluate_reference() with the KERN_ERR priority should really be debug messages, but then they would be redundant, because acpi_util_eval_error() is called too at the same spots (except for one). Drop the kernel messages from there entirely and leave the acpi_util_eval_error() to handle the debug printing. In one case, replace the kernel message with a call to acpi_util_eval_error(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18ACPI: remove unnecessary sizeof(u8)Fabian Frederick
sizeof(u8) is always 1. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-10ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()Zhang Rui
Add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package(), so that we can use this helper for more cases like _ART/_TRT. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-09-24ACPI / utils: Update acpi_check_dsm() commentsYijing Wang
Update function comments. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26ACPI: add dynamic_debug supportBjørn Mork
Commit 1a699476e258 ("ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()") added debug messages for a few common events. These debug messages are unconditionally enabled if CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented meaning, making the ACPI system spew lots of unwanted noise on any kernel with dynamic debugging. The bug was introduced by commit fbfddae69657 ("ACPI: Add acpi_handle_<level>() interfaces"), which added the CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning. Fix by adding real support for dynamic_debug. Fixes: fbfddae69657 ("ACPI: Add acpi_handle_<level>() interfaces") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04ACPI: Clean up memory allocationsjhbird.choi@samsung.com
Use acpi_os_allocate_zeroed instead of acpi_os_allocate + memset. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-22ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OSTRafael J. Wysocki
Replace acpi_evaluate_hotplug_ost() with acpi_evaluate_ost() everywhere and drop the ACPI_HOTPLUG_OST symbol so that hotplug _OST is supported unconditionally. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-02-21ACPI: rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost()Jiang Liu
Rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost() for later resue. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-05ACPI / utils: remove a pointless NULL checkDan Carpenter
"element" can't be NULL because it is the address of a struct member. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-12Merge branch 'acpi-dsm'Rafael J. Wysocki
* acpi-dsm: ACPI / extlog: replace open-coded _DSM code with helper functions ACPI / nouveau: replace open-coded _DSM code with helper functions nouveau / ACPI: fix memory leak in ACPI _DSM related code ACPI / i915: replace open-coded _DSM code with helper functions ACPI / i2c-hid: replace open-coded _DSM code with helper functions ACPI / TPM: detect PPI features by checking availability of _DSM functions ACPI / TPM: replace open-coded _DSM code with helper functions ACPI / TPM: match node name instead of full path when searching for TPM device PCI / pci-label: treat PCI label with index 0 as valid label ACPI / PCI: replace open-coded _DSM code with helper functions PCI / pci-label: release allocated ACPI object on error recovery path ACPI: introduce helper interfaces for _DSM method
2014-01-05ACPI: introduce helper interfaces for _DSM methodJiang Liu
There are several drivers making use of ACPI _DSM method to detect and invoke device specific methods. Currently every driver has implemented its private version to support ACPI _DSM method. So this patch introduces three helper functions to support ACPI _DSM method, which will be used to replace open-coded versions. It helps to simplify code and improve code readability. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPI: Fix spelling mistake in error messagesColin Ian King
Fix spelling mistake "expecing" --> "expecting" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-10ACPI: improve acpi_extract_package() utilityAl Stone
The current version requires one to know the size of the package a priori; this is almost impossible if the package is composed of strings of variable length. This change allows the utility to allocate a buffer of the proper size if asked. Signed-off-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15ACPI: introduce two helper functions for _EJ0 and _LCKJiang Liu
Introduce two helper functions, acpi_evaluate_ej0() and acpi_evaluate_lck(), that will execute the _EJ0 and _LCK ACPI control methods, respectively, and use them to simplify the ACPI scan code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15ACPI: introduce helper function acpi_execute_simple_method()Jiang Liu
Introduce helper function acpi_execute_simple_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15ACPI: introduce helper function acpi_has_method()Jiang Liu
Introduce helper function acpi_has_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Add acpi_handle_<level>() interfacesToshi Kani
This patch introduces acpi_handle_<level>(), where <level> is a kernel message level such as err/warn/info, to support improved logging messages for ACPI, esp. hot-plug operations. acpi_handle_<level>() appends "ACPI" prefix and ACPI object path to the messages. This improves diagnosis of hotplug operations since an error message in a log file identifies an object that caused an issue. This interface acquires the global namespace mutex to obtain an object path. In interrupt context, it shows the object path as <n/a>. acpi_handle_<level>() takes acpi_handle as an argument, which is passed to ACPI hotplug notify handlers from the ACPICA. Therefore, it is always available unlike other kernel objects, such as device. For example: acpi_handle_err(handle, "Device don't exist, dropping EJECT\n"); logs an error message like this at KERN_ERR. ACPI: \_SB_.SCK4.CPU4: Device don't exist, dropping EJECT ACPI hot-plug drivers can use acpi_handle_<level>() when they need to identify a target ACPI object path in their messages, such as error cases. The usage model is similar to dev_<level>(). acpi_handle_<level>() can be used when a device is not created or is invalid during hot-plug operations. ACPI object path is also consistent on the platform, unlike device name that gets incremented over hotplug operations. ACPI drivers should use dev_<level>() when a device object is valid. Device name provides more user friendly information, and avoids acquiring the global ACPI namespace mutex. ACPI drivers also continue to use pr_<level>() when they do not need to specify device information, such as boot-up messages. Note: ACPI_[WARNING|INFO|ERROR]() are intended for the ACPICA and are not associated with the kernel message level. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-09-21ACPI: Use ACPICA native way to decode the PLD bufferFeng Tang
This patch is on top of the ACPICA 20120816 release, which implemented a native way to decode PLD buffer, so use it instead of leting upper level users do the decoding. v2: Modify the check for PLD buffer length to reject buffers whose length < 16 Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04ACPI: Add an interface to evaluate _OSTToshi Kani
Added acpi_evaluate_hotplug_opt(). All ACPI hotplug handlers must call this function when evaluating _OST for hotplug operations. If the platform does not support _OST, this function returns AE_NOT_FOUND and has no effect on the platform. ACPI_HOTPLUG_OST is defined when all relevant ACPI hotplug operations, such as CPU, memory and container hotplug, are enabled. This assures consistent behavior among the hotplug operations with regarding the _OST support. When ACPI_HOTPLUG_OST is not defined, this function is a no-op. ACPI PCI hotplug is not enhanced to support _OST at this time since it is a legacy method being replaced by PCIe native hotplug. _OST support for ACPI PCI hotplug may be added in future if necessary. Some platforms may require the OS to support _OST in order to support ACPI hotplug operations. For example, if a platform has the management console where user can request a hotplug operation from, this _OST support would be required for the management console to show the result of the hotplug request to user. Added macro definitions of _OST source events and status codes. Also renamed OSC_SB_CPUHP_OST_SUPPORT to OSC_SB_HOTPLUG_OST_SUPPORT since this _OSC bit is not specific to CPU hotplug. This bit is defined in Table 6-147 of ACPI 5.0 as follows. Bits: 3 Field Name: Insertion / Ejection _OST Processing Support Definition: This bit is set if OSPM will evaluate the _OST object defined under a device when processing insertion and ejection source event codes. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-11ACPI: Add _PLD supportMatthew Garrett
Add a simple helper function to allow drivers to obtain the physical device location data. Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-14Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-02-16ACPI: delete unused acpi_evaluate_string()Len Brown
Roel found a logic issue in the #if 0 acpi_evaluate_string(): - || (element->type != ACPI_TYPE_BUFFER) + && (element->type != ACPI_TYPE_BUFFER) delete the dead code. pointed-out-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-28ACPI: replace acpi_integer by u64Lin Ming
acpi_integer is now obsolete and removed from the ACPICA code base, replaced by u64. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26ACPI: scheduling in atomic via acpi_evaluate_integer ()Pavel Machek
Now I know why I had strange "scheduling in atomic" problems: acpi_evaluate_integer() does malloc(..., irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL)... which is (of course) broken. There's no way to reliably tell if we need GFP_ATOMIC or not from code, this one for example fails to detect spinlocks held. Fortunately, allocation seems small enough to be done on stack. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-22ACPICA: Fixes for external Reference ObjectsBob Moore
All Reference Objects returned via the AcpiEvaluteObject interface are now marked as type "REFERENCE" instead of "ANY". The type ANY is now reservered for NULL objects - either NULL package elements or unresolved named references. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11ACPICA: Warn if packages with invalid references are evaluatedThomas Renninger
And return an error to avoid NULL pointer access by the caller Lin Ming's patch avoids corrupted mem access when BIOS has invalid references included, the handle is now zero instead of corrupted. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16ACPI: sparse fix, replace macro with static functionHarvey Harrison
replace acpi_util_eval_error macro with static function. Avoid these sparse warnings due to using buffer within the macro. drivers/acpi/utils.c:273:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:259:21: originally declared here drivers/acpi/utils.c:279:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:259:21: originally declared here drivers/acpi/utils.c:368:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:375:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:382:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:402:4: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16ACPI: avoid irqrouter_resume might_sleep oops on resume from S4Len Brown
__might_sleep+0x8e/0x93 acpi_os_wait_semaphore+0x50/0xa3 acpi_ut_acquire_mutex+0x28/0x6a acpi_ns_get_node+0x46/0x88 acpi_ns_evaluate+0x2d/0xfc acpi_rs_set_srs_method_data+0xc5/0xe1 acpi_set_current_resources+0x31/0x3f acpi_pci_link_set+0xfc/0x1a5 irqrouter_resume+0x48/0x5f and __might_sleep+0x8e/0x93 kmem_cache_alloc+0x2a/0x8f acpi_evaluate_integer+0x32/0x96 acpi_bus_get_status+0x30/0x84 acpi_pci_link_set+0x12a/0x1a5 irqrouter_resume+0x48/0x5f http://bugzilla.kernel.org/show_bug.cgi?id=6810 Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: delete acpi_os_free(), use kfree() directlyLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>