summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2019-04-15Merge tag 'libnvdimm-fixes-5.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "I debated holding this back for the v5.2 merge window due to the size of the "zero-key" changes, but affected users would benefit from having the fixes sooner. It did not make sense to change the zero-key semantic in isolation for the "secure-erase" command, but instead include it for all security commands. The short background on the need for these changes is that some NVDIMM platforms enable security with a default zero-key rather than let the OS specify the initial key. This makes the security enabling that landed in v5.0 unusable for some users. Summary: - Compatibility fix for nvdimm-security implementations with a default zero-key. - Miscellaneous small fixes for out-of-bound accesses, cleanup after initialization failures, and missing debug messages" * tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: tools/testing/nvdimm: Retain security state after overwrite libnvdimm/pmem: fix a possible OOB access when read and write pmem libnvdimm/security, acpi/nfit: unify zero-key for all security commands libnvdimm/security: provide fix for secure-erase to use zero-key libnvdimm/btt: Fix a kmemdup failure check libnvdimm/namespace: Fix a potential NULL pointer dereference acpi/nfit: Always dump _DSM output payload
2019-04-09ACPICA: Namespace: remove address node from global list after method terminationErik Schmauss
ACPICA commit b233720031a480abd438f2e9c643080929d144c3 ASL operation_regions declare a range of addresses that it uses. In a perfect world, the range of addresses should be used exclusively by the AML interpreter. The OS can use this information to decide which drivers to load so that the AML interpreter and device drivers use different regions of memory. During table load, the address information is added to a global address range list. Each node in this list contains an address range as well as a namespace node of the operation_region. This list is deleted at ACPI shutdown. Unfortunately, ASL operation_regions can be declared inside of control methods. Although this is not recommended, modern firmware contains such code. New module level code changes unintentionally removed the functionality of adding and removing nodes to the global address range list. A few months ago, support for adding addresses has been re- implemented. However, the removal of the address range list was missed and resulted in some systems to crash due to the address list containing bogus namespace nodes from operation_regions declared in control methods. In order to fix the crash, this change removes dynamic operation_regions after control method termination. Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by: Michael J Gruber <mjg@fedoraproject.org> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-04Merge tag 'acpi-5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent stale GPE events from triggering spurious system wakeups from suspend-to-idle (Furquan Shaikh)" * tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of GPEs before enabling them
2019-04-04Merge branch 'acpica' into acpiRafael J. Wysocki
* acpica: ACPICA: Clear status of GPEs before enabling them
2019-03-30Merge tag 'acpi-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This corrects a previous attempt to make Linux use its own set of ACPI debug flags different from the upstream ACPICA's default (Erik Schmauss)" * tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: use different default debug value than ACPICA
2019-03-30libnvdimm/security, acpi/nfit: unify zero-key for all security commandsDave Jiang
With zero-key defined, we can remove previous detection of key id 0 or null key in order to deal with a zero-key situation. Syncing all security commands to use the zero-key. Helper functions are introduced to return the data that points to the actual key payload or the zero_key. This helps uniformly handle the key material even with zero_key. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-28ACPICA: Clear status of GPEs before enabling themFurquan Shaikh
Commit 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") was added to stop clearing event status bits unconditionally in the system-wide suspend and resume paths. This was done because of an issue with a laptop lid appaering to be closed even when it was used to wake up the system from suspend (see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which happened because event status bits were cleared unconditionally on system resume. Though this change fixed the issue in the resume path, it introduced regressions in a few suspend paths. First regression was reported and fixed in the S5 entry path by commit fa85015c0d95 ("ACPICA: Clear status of all events when entering S5"). Next regression was reported and fixed for all legacy sleep paths by commit f317c7dc12b7 ("ACPICA: Clear status of all events when entering sleep states"). However, there still is a suspend-to-idle regression, since suspend-to-idle does not follow the legacy sleep paths. In the suspend-to-idle case, wakeup is enabled as part of device suspend. If the status bits of wakeup GPEs are set when they are enabled, it causes a premature system wakeup to occur. To address that problem, partially revert commit 18996f2db918 to restore GPE status bits clearing before the GPE is enabled in acpi_ev_enable_gpe(). Fixes: 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") Signed-off-by: Furquan Shaikh <furquan@google.com> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25ACPI / CPPC: Fix guaranteed performance handlingSrinivas Pandruvada
As per the ACPI specification, "Guaranteed Performance Register" is a "Buffer" field and it cannot be "Integer", so treat the "Integer" type for "Guaranteed Performance Register" field as invalid and ignore its value in that case. Also save one cpc_read() call when "Guaranteed Performance Register" is not present, which means a register defined as: "Register(SystemMemory, 0, 0, 0, 0)". Fixes: 29523f095397 ("ACPI / CPPC: Add support for guaranteed performance") Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25ACPI: use different default debug value than ACPICAErik Schmauss
Rather than setting debug output flags during early init, its makes more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for Linux. ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d Link: https://github.com/acpica/acpica/commit/60903715 Fixes: ce5cbf53496b ("ACPI: Set debug output flags independent of ACPICA") Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-22acpi/nfit: Always dump _DSM output payloadDan Williams
The dynamic-debug statements for command payload output only get emitted when the command is not ND_CMD_CALL. Move the output payload dumping ahead of the early return path for ND_CMD_CALL. Fixes: 31eca76ba2fc9 ("...whitelisted dimm command marshaling mechanism") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-19ACPI / utils: Drop reference in test for device presenceAndy Shevchenko
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-16Merge tag 'devdax-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-03-14Merge tag 'acpi-5.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix a couple of issues and do some cleanups on top of the previous ACPI changes for 5.1-rc1. Specifics: - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko) - Prevent user space from getting confusing error values on failing ACPI sysfs accesses (Rafael Wysocki) - Simplify leaf node detection in the PPTT parsing code by using a new flag defined in ACPI 6.3 (Jeremy Linton) - Add missing "static" in some places in the ACPI configfs code (Andy Shevchenko) - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)" * tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sysfs: Prevent get_status() from returning acpi_status ACPI / device_sysfs: Avoid OF modalias creation for removed device ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static ACPI: tables: Simplify PPTT leaf node detection ACPI: Documentation: Fix path for acpidbg tool
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
2019-03-14Merge branches 'acpi-tables', 'acpi-debug', 'acpi-doc' and 'acpi-misc'Rafael J. Wysocki
* acpi-tables: ACPI: tables: Simplify PPTT leaf node detection * acpi-debug: ACPI: sysfs: Prevent get_status() from returning acpi_status * acpi-doc: ACPI: Documentation: Fix path for acpidbg tool * acpi-misc: ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static
2019-03-13Merge tag 'libnvdimm-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has been in -next since before the merge window opened, with no known collisions / issues reported. The only detail worth noting, outside the summary below, is that the "libnvdimm-start-pad" topic has been truncated to just cleanups and small fixes. The full topic branch would have doubled down on hacks around the "section alignment" limitation of the core-mm, instead effort is now being spent to address that root issue in the memory hotplug implementation for v5.2. - Fix nfit-bus command submission regression - Support retrieval of short-ARS results if the ARS state is "requires continuation", and even if the "no_init_ars" module parameter is specified - Allow busy-polling of the kernel ARS state by allowing root to reset the exponential back-off timer - Filter potentially stale ARS results by tracking query-ARS relative to the previous start-ARS - Enhance dax_device alignment checks - Add support for the Hyper-V family of device-specific-methods (DSMs) - Add several fixes and workarounds for Hyper-V compatibility - Fix support to cache the dirty-shutdown-count at init" * tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits) libnvdimm/namespace: Clean up holder_class_store() libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings acpi/nfit: Update NFIT flags error message libnvdimm/btt: Fix LBA masking during 'free list' population libnvdimm/btt: Remove unnecessary code in btt_freelist_init libnvdimm/pfn: Remove dax_label_reserve dax: Check the end of the block-device capacity with dax_direct_access() nfit/ars: Avoid stale ARS results nfit/ars: Allow root to busy-poll the ARS state machine nfit/ars: Introduce scrub_flags nfit/ars: Remove ars_start_flags nfit/ars: Attempt short-ARS even in the no_init_ars case nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot acpi/nfit: Require opt-in for read-only label configurations libnvdimm/pmem: Honor force_raw for legacy pmem regions libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init() libnvdimm: Fix altmap reservation size calculation libnvdimm, pfn: Fix over-trim in trim_pfn_device() acpi/nfit: Fix bus command validation libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family ...
2019-03-12ACPI: sysfs: Prevent get_status() from returning acpi_statusRafael J. Wysocki
The return value of get_status() is passed to user space on errors, so it should not return acpi_status values then. Make it return error values that are meaningful for user space instead. This also makes a Clang warning regarding the initialization of a local variable in get_status() go away. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12ACPI / device_sysfs: Avoid OF modalias creation for removed deviceAndy Shevchenko
If SSDT overlay is loaded via ConfigFS and then unloaded the device, we would like to have OF modalias for, already gone. Thus, acpi_get_name() returns no allocated buffer for such case and kernel crashes afterwards: ACPI: Host-directed Dynamic ACPI Table Unload ads7950 spi-PRP0001:00: Dropping the link to regulator.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:create_of_modalias.isra.1+0x4c/0x150 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0 Call Trace: __acpi_device_uevent_modalias+0xb0/0x100 spi_uevent+0xd/0x40 ... In order to fix above let create_of_modalias() check the status returned by acpi_get_name() and bail out in case of failure. Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381 Reported-by: Ferry Toth <fntoth@gmail.com> Tested-by: Ferry Toth<fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12ACPI / configfs: Mark local data structures staticAndy Shevchenko
There is no need to have non-static local data structures. otherwise sparse is not happy: CHECK drivers/acpi/acpi_configfs.c drivers/acpi/acpi_configfs.c:100:31: warning: symbol 'acpi_table_bin_attrs' was not declared. Should it be static? drivers/acpi/acpi_configfs.c:196:27: warning: symbol 'acpi_table_attrs' was not declared. Should it be static? drivers/acpi/acpi_configfs.c:236:34: warning: symbol 'acpi_table_group_ops' was not declared. Should it be static? Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12ACPI / configfs: Mark local functions staticAndy Shevchenko
There is no need to have non-static local functions. otherwise compiler is not happy: CC [M] drivers/acpi/acpi_configfs.o drivers/acpi/acpi_configfs.c:105:9: warning: no previous prototype for ‘acpi_table_signature_show’ [-Wmissing-prototypes] ssize_t acpi_table_signature_show(struct config_item *cfg, char *str) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/acpi/acpi_configfs.c:115:9: warning: no previous prototype for ‘acpi_table_length_show’ [-Wmissing-prototypes] ssize_t acpi_table_length_show(struct config_item *cfg, char *str) ^~~~~~~~~~~~~~~~~~~~~~ ... Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11Merge branch 'for-5.1/nfit/ars' into libnvdimm-for-nextDan Williams
Merge several updates to the ARS implementation. Highlights include: * Support retrieval of short-ARS results if the ARS state is "requires continuation", and even if the "no_init_ars" module parameter is specified. * Allow busy-polling of the kernel ARS state by allowing root to reset the exponential back-off timer. * Filter potentially stale ARS results by tracking query-ARS relative to the previous start-ARS.
2019-03-11Merge branch 'for-5.1/libnvdimm' into libnvdimm-for-nextDan Williams
Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights include: * Support for the Hyper-V family of device-specific-methods (DSMs) * Several fixes and workarounds for Hyper-V compatibility. * Fix for the support to cache the dirty-shutdown-count at init.
2019-03-11ACPI: tables: Simplify PPTT leaf node detectionJeremy Linton
ACPI 6.3 bumps the PPTT table revision and adds a LEAF_NODE flag. This allows us to avoid a second pass through the table to assure that the node in question is a leaf. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-10Merge tag 'platform-drivers-x86-v5.1-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ...
2019-03-08Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and ↵Stephen Boyd
'clk-SA-fixes' into clk-next - Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message
2019-03-08Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...
2019-03-06Merge tag 'acpi-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates including ACPI 6.3 support among other things, APEI updates including the ARM Software Delegated Exception Interface (SDEI) support, ACPI EC driver fixes and cleanups and other assorted improvements. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190215 including ACPI 6.3 support and more: * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik Schmauss). * Update of the PCC Identifier structure in PDTT (Erik Schmauss). * Support for new Generic Affinity Structure subtable in SRAT (Erik Schmauss). * New PCC operation region support (Erik Schmauss). * Support for GICC statistical profiling for MADT (Erik Schmauss). * New Error Disconnect Recover notification support (Erik Schmauss). * New PPTT Processor Structure Flags fields support (Erik Schmauss). * ACPI 6.3 HMAT updates (Erik Schmauss). * GTDT Revision 3 support (Erik Schmauss). * Legacy module-level code (MLC) support removal (Erik Schmauss). * Update/clarification of messages for control method failures (Bob Moore). * Warning on creation of a zero-length opregion (Bob Moore). * acpiexec option to dump extra info for memory leaks (Bob Moore). * More ACPI error to firmware error conversions (Bob Moore). * Debugger fix (Bob Moore). * Copyrights update (Bob Moore) - Clean up sleep states support code in ACPICA (Christoph Hellwig) - Rework in_nmi() handling in the APEI code and add suppor for the ARM Software Delegated Exception Interface (SDEI) to it (James Morse) - Fix possible out-of-bounds accesses in BERT-related core (Ross Lagerwall) - Fix the APEI code parsing HEST that includes a Deferred Machine Check subtable (Yazen Ghannam) - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files (YueHaibing) - Switch the APEI ERST code to the new generic UUID API (Andy Shevchenko) - Update the MAINTAINERS entry for APEI (Borislav Petkov) - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui) - Fix DMI checks handling in the ACPI backlight driver and add the "Lunch Box" chassis-type check to it (Hans de Goede) - Add support for using ACPI table overrides included in built-in initrd images (Shunyong Yang) - Update ACPI device enumeration to treat the PWM2 device as "always present" on Lenovo Yoga Book (Yauhen Kharuzhy) - Fix up the enumeration of device objects with the PRP0001 device ID (Andy Shevchenko) - Clean up PPTT parsing error messages (John Garry) - Clean up debugfs files creation handling (Greg Kroah-Hartman, Rafael Wysocki) - Clean up the ACPI DPTF Makefile (Masahiro Yamada)" * tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) ACPI / bus: Respect PRP0001 when retrieving device match data ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book ACPI / video: Extend chassis-type detection with a "Lunch Box" check ..
2019-03-04Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (48 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon cpufreq: Replace double NOT (!!) with single NOT (!) cpufreq: intel_pstate: Add reasons for failure and debug messages cpufreq: dt: Implement online/offline() callbacks ...
2019-03-04Merge branches 'pm-cpuidle' and 'powercap'Rafael J. Wysocki
* pm-cpuidle: ACPI / processor: Set P_LVL{2,3} idle state descriptions intel_idle: add support for Jacobsville cpuidle: dt: bail out if the idle-state DT node is not compatible cpuidle: use BIT() for idle state flags and remove CPUIDLE_DRIVER_FLAGS_MASK Documentation: driver-api: PM: Add cpuidle document cpuidle: New timer events oriented governor for tickless systems * powercap: powercap/intel_rapl: add Ice Lake mobile powercap: intel_rapl: add support for Jacobsville
2019-03-04Merge branches 'acpi-video' and 'acpi-x86'Rafael J. Wysocki
* acpi-video: ACPI / video: Extend chassis-type detection with a "Lunch Box" check ACPI / video: Refactor and fix dmi_is_desktop() * acpi-x86: ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
2019-03-04Merge branch 'acpi-apei'Rafael J. Wysocki
* acpi-apei: (29 commits) efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region MAINTAINERS: Add James Morse to the list of APEI reviewers ACPI / APEI: Add support for the SDEI GHES Notification type firmware: arm_sdei: Add ACPI GHES registration helper ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry() ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length ACPI / APEI: Make GHES estatus header validation more user friendly ACPI / APEI: Pass ghes and estatus separately to avoid a later copy ACPI / APEI: Let the notification helper specify the fixmap slot ACPI / APEI: Move locking to the notification helper arm64: KVM/mm: Move SEA handling behind a single 'claim' interface KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors ACPI / APEI: Generalise the estatus queue's notify code ACPI / APEI: Don't update struct ghes' flags in read/clear estatus ACPI / APEI: Remove spurious GHES_TO_CLEAR check ...
2019-03-04Merge branches 'acpi-tables', 'acpi-debug', 'acpi-ec' and 'acpi-dptf'Rafael J. Wysocki
* acpi-tables: ACPI/PPTT: Add acpi_pptt_warn_missing() to consolidate logs ACPI / tables: table override from built-in initrd * acpi-debug: ACPI: debug: Clean up acpi_aml_init() ACPI: no need to check return value of debugfs_create functions * acpi-ec: Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk" ACPI: EC: Simplify boot EC checks in acpi_ec_add() ACPI: EC: Eliminate acpi_config_boot_ec() ACPI: EC: Make acpi_ec_dsdt_probe() more straightforward ACPI: EC: Make acpi_ec_ecdt_probe() more straightforward ACPI: EC: Declare boot_ec as static ACPI: EC: Clean up probing for early EC * acpi-dptf: ACPI / DPTF: remove header search path to the parent directory
2019-03-04Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPICA: Get rid of acpi_sleep_dispatch() ACPICA: Update version to 20190108 ACPICA: All acpica: Update copyrights to 2019 ACPICA: acpiexec: Add option to dump extra info for memory leaks ACPICA: Convert more ACPI errors to firmware errors
2019-03-01acpi/nfit: Update NFIT flags error messageToshi Kani
ACPI NFIT flags field reports major errors on NVDIMM, which need user's attention. Update the current log to a proper error message with dev_err(). The current message string is kept for grep-compatibility. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Robert Elliott <elliott@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-27ACPI / bus: Respect PRP0001 when retrieving device match dataAndy Shevchenko
In the PRP0001 case, the compatible string may have additional data affiliated with the device. When we call device_get_match_data() on such device, we will get nothing since currently acpi_device_get_match_data() doesn't respect PRP0001. To fix the above, try acpi_of_match_device() if there is no ACPI table in the driver. Anyway, note that the device is expected to get its own proper ACPI ID. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24Merge back earlier cpufreq material for v5.1.Rafael J. Wysocki
2019-02-24ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formattingErik Schmauss
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24ACPICA: ACPI 6.3: add Error Disconnect Recover Notification valueErik Schmauss
ACPICA commit 205ac8fc721073f1e609df963b14ef2237aeba73 Link: https://github.com/acpica/acpica/commit/205ac8fc Reviewed-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24ACPICA: ACPI 6.3: add PCC operation region support for AML interpreterErik Schmauss
ACPICA commit a4849944e80f97970e99843f4975850753584a4e This change adds PCC operation region support in the AML interpreter and a default handler for acpiexec. According to the specification, the PCC operation region performs a transaction when the COMD field is written. This allows ASL to write data to other fields before sending the data. In order to accommodate this protocol, a temorary buffer is added to the regionfield object to accumulate writes. If any offset that spans COMD is written, the temporary buffer is sent to the PCC operation region handler to be processed. This change also renames the PCC keyword to platform_comm_channel. Link: https://github.com/acpica/acpica/commit/a4849944 Reviewed-by: Kyle Pelton <kyle.d.pelton@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-22clk: x86: Move clk-lpss.h to platform_data/x86Andy Shevchenko
clk-lpss.h is solely x86 related header. Move it to correct folder. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20nfit/ars: Avoid stale ARS resultsDan Williams
Gate ARS result consumption on whether the OS issued start-ARS since the previous consumption. The BIOS may only clear its result buffers after a successful start-ARS. Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks") Cc: <stable@vger.kernel.org> Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20nfit/ars: Allow root to busy-poll the ARS state machineDan Williams
The ARS implementation implements exponential back-off on the poll interval to prevent high-frequency access to the DIMM / platform interface. Depending on when the ARS completes the poll interval may exceed the completion event by minutes. Allow root to reset the timeout each time it probes the status. A one-second timeout is still enforced, but root can otherwise can control the poll interval. Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: <stable@vger.kernel.org> Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20nfit/ars: Introduce scrub_flagsDan Williams
In preparation for introducing new flags to gate whether ARS results are stale, or poll the completion state, convert the existing flags to an unsigned long with enumerated values. This conversion allows the flags to be atomically updated outside of ->init_mutex. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20nfit/ars: Remove ars_start_flagsDan Williams
The ars_start_flags property of 'struct acpi_nfit_desc' is no longer used since ARS_REQ_SHORT and ARS_REQ_LONG were added. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20nfit/ars: Attempt short-ARS even in the no_init_ars caseDan Williams
The no_init_ars option is meant to prevent long-ARS, but short-ARS should be allowed to grab any immediate results. Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: <stable@vger.kernel.org> Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20ACPI: APEI: Fix possible out-of-bounds access to BERT regionRoss Lagerwall
Check that the length recorded in the generic error status block is within the region before checking the contents of the region itself. Otherwise it may result in an out-of-bounds access if the system firmware has generated a status block with an invalid length (larger than the mapped region). Also move the block_status check so that it only happens after the block has been verified to be within the mapped region. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Borislav Petkov <bp@suse.de> Tested-by: Tyler Baicar <baicar.tyler@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18ACPI / processor: Set P_LVL{2,3} idle state descriptionsYazen Ghannam
The ACPI idle driver will fallback to using the legacy P_LVL* SystemIO method of entering C-states if the _CST method is disabled and P_BLK is defined. However, in this case the C2 and C3 states won't have a description set, so the user will see "<null>" when reading the description from sysfs. Give each of these states a description. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18ACPI / CPPC: Add a helper to get desired performanceXiongfeng Wang
This patch add a helper to get the value of desired performance register. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [ rjw: More white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIGErik Schmauss
ACPICA commit 0015e2491bda996ddb9d56bfa4ee39644acbb22b Link: https://github.com/acpica/acpica/commit/0015e249 Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18ACPICA: Update/clarify messages for control method failuresBob Moore
ACPICA commit 2efd616e5b1c960f407763e6782f7dc259ea55df Attempting to improve error messages to clarify that errors are bubbled up from the original error, possibly across nested methods. Link: https://github.com/acpica/acpica/commit/2efd616e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>