summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-zpodd.c
AgeCommit message (Collapse)Author
2014-03-14libata: zpodd: eliminate odd_can_poweroffAaron Lu
Now that we can directly get the ACPI device conterpart of the physical ATA transport device, the odd_can_poweroff can be eliminated. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-11-23ata: fix acpi_bus_get_device() return value checkYijing Wang
Since acpi_bus_get_device() returns plain int and not acpi_status, ACPI_FAILURE() should not be used for checking its return value. Fix that. tj: Dropped unused local variable @status from odd_can_poweroff(). Reported by kbuild test bot. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Aaron Lu <aaron.lu@intel.com> Cc: linux-ide@vger.kernel.org Cc: kbuild test robot <fengguang.wu@intel.com>
2013-08-23ata: acpi: rework the ata acpi bind supportAaron Lu
Binding ACPI handle to SCSI device has several drawbacks, namely: 1 During ATA device initialization time, ACPI handle will be needed while SCSI devices are not created yet. So each time ACPI handle is needed, instead of retrieving the handle by ACPI_HANDLE macro, a namespace scan is performed to find the handle for the corresponding ATA device. This is inefficient, and also expose a restriction on calling path not holding any lock. 2 The binding to SCSI device tree makes code complex, while at the same time doesn't bring us any benefit. All ACPI handlings are still done in ATA module, not in SCSI. Rework the ATA ACPI binding code to bind ACPI handle to ATA transport devices(ATA port and ATA device). The binding needs to be done only once, since the ATA transport devices do not go away with hotplug. And due to this, the flush_work call in hotplug handler for ATA bay is no longer needed. Tested on an Intel test platform for binding and runtime power off for ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot and S3, where its SATA port node has _SDD and _GTF control methods when configured as an AHCI controller and its PATA device node has _GTF control method when configured as an IDE controller. SATA PMP binding and ATA hotplug is not tested. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Dirk Griesbach <spamthis@freenet.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-24libata-zpodd: must use ata_tf_init()Sergei Shtylyov
There are some SATA controllers which have both devices 0 and 1 but this module just zeroes out taskfile and sets then ATA_TFLAG_DEVICE (not sure that's needed) which could lead to a wrong device being selected just before issuing command. Thus we should call ata_tf_init() which sets up the device register value properly, like all other users of ata_exec_internal() do... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-02-20[libata] fix smatch warning for zpodd_wake_devAaron Lu
Fix a smatch warning caused by an useless pointer check. The context parameter (aka. ata_dev) will never be NULL until we remove the acpi notification handler, so it is pointless to check it for NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25[libata] scsi: no poll when ODD is powered offAaron Lu
When the ODD is powered off, any action the user did to the ODD that would generate a media event will trigger an ACPI interrupt, so the poll for media event is no longer necessary. And the poll will also cause a runtime status change, which will stop the ODD from staying in powered off state, so the poll should better be stopped. But since we don't have access to the gendisk structure in LLDs, here comes the disk_events_disable_depth for scsi device. This field is a hint set by LLDs to convey information to upper layer drivers. A value of 0 means media poll is necessary for the device, while values above 0 means media poll is not needed and should better be skipped. So we can increase its value when we are to power off the ODD in ATA layer and decrease its value when the ODD is powered on, effectively silence the media events poll. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21libata: expose pm qos flags for ata deviceAaron Lu
Expose pm qos flags to user space so that user has a chance to disable ZPODD feature, if he/she has a broken platform or devices or simply does not like this feature. This flag is exposed to user space only for ZPODD devices. Due to this flag, it is possible the ODD is ZP ready but we didn't power it off. So the zp_ready flag will need to be cleared whenever we found the ODD is not in ZP ready state. Previously, once zp_ready is set, the ODD will always be powered off and the flag will be cleared in post_poweron. But this is no longer the case now. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21libata: handle power transition of ODDAaron Lu
When ata port is runtime suspended, it will check if the ODD attched to it is a zero power(ZP) capable ODD and if the ZP capable ODD is in zero power ready state. And if this is not the case, the highest acpi state will be limited to ACPI_STATE_D3_HOT to avoid powering off the ODD. And if the ODD can be powered off, runtime wake capability needs to be enabled and powered_off flag will be set to let resume code knows that the ODD was in powered off state. And on resume, before it is powered on, if it was powered off during suspend, runtime wake capability needs to be disabled. After it is recovered, the ODD is considered functional, post power on processing like eject tray if the ODD is drawer type is done, and several ZPODD related fields will also be reset. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21libata: check zero power ready status for ZPODDAaron Lu
Per the Mount Fuji spec, the ODD is considered zero power ready when: - For slot type ODD, no media inside; - For tray type ODD, no media inside and tray closed. The information can be retrieved by either the returned information of command GET_EVENT_STATUS_NOTIFICATION(the command is used to poll for media event) or sense code. The information provided by the media status byte is not accurate, it is possible that after a new disc is just inserted, the status byte still returns media not present. So this information can not be used as the deciding factor, we use sense code to decide if zpready status is true. When we first sensed the ODD in the zero power ready state, the zp_sampled will be set and timestamp will be recoreded. And after ODD stayed in this state for some pre-defined period, the ODD is considered as power off ready and the zp_ready flag will be set. The zp_ready flag serves as the deciding factor other code will use to see if power off is OK for the ODD. The Mount Fuji spec suggests a delay should be used here, to avoid the case user ejects the ODD and then instantly inserts a new one again, so that we can avoid a power transition. And some ODDs may be slow to place its head to the home position after disc is ejected, so a delay here is generally a good idea. And the delay time can be changed via the module param zpodd_poweroff_delay. The zero power ready status check is performed in the ata port's runtime suspend code path, when port is not frozen yet, as we need to issue some IOs to the ODD. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21libata: move acpi notification code to zpoddAaron Lu
Since the ata acpi notification code introduced in commit 3bd46600a7a7e938c54df8cdbac9910668c7dfb0 is solely for ZPODD, and we now have a dedicated place for it, move these code there. And the ata_acpi_add_pm_notifier code is changed a little bit in that it is now invoked when scsi device is not bound with ACPI yet, so the way to get the acpi handle is different with the previous version. And the ata_acpi_add/remove_pm_notifier is also simplified a little bit in that it doesn't check if the acpi_device for the handle exists or not as the odd_can_poweroff function already checked that. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21libata: identify and init ZPODD devicesAaron Lu
The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>