summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2016-09-30ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"Tang Yuantian
This reverts commit 640847298e2b7f19 ("ahci: qoriq: Disable NCQ on ls2080a SoC") The erratum has been fixed in ls2080a v2.0 and later soc. In reality, customer will not get any ls2080a v1.0 soc. Neither apply to any products. So reverting this commit won't create any side effect. Blacklisting v2.0 could also be a option, but that needs to check the soc version which is not suitable in the driver. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-22pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERRHarman Kalra
Signed-off-by: Harman Kalra <harman4linux@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-22ata: Replace BUG() with BUG_ON().Harman Kalra
Replace BUG() with BUG_ON(). Caught by coccinelle. Signed-off-by: Harman Kalra <harman4linux@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-20ata: sata_mv: Replacing dma_pool_alloc and memset with a single call ↵Harman Kalra
dma_pool_zalloc. Replacing dma_pool_alloc and memset with a single call to dma_pool_zalloc Signed-off-by: Harman Kalra <harman4linux@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-09libata: Some drives failing on SCT Write SameShaun Tancheff
Restrict support SCT Write Same to devices which also support ZAC where support is required. Reported-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-06ahci: use pci_alloc_irq_vectorsChristoph Hellwig
Use the new pci_alloc_irq_vectors API to allocate MSI-X and MSI vectors. The big advantage over the old code is that we can use the same API for MSI and MSI-X, and that we don't need to store the MSI-X vector mapping in driver-private data structures. This first conversion keeps the probe order as-is: MSI-X multi vector, MSI multi vector, MSI single vector, MSI-X single vector and last a single least legacy interrupt line. There is one small change of behavior: we now check the "MSI Revert to Single Message" flag for MSI-X in addition to MSI. Because the API to find the Linux IRQ number for a MSI/MSI-X vector is PCI specific, but libahaci is bus-agnostic I had to a get_irq_vector function pointer to struct ahci_host_priv. The alternative would be to move the multi-vector case of ahci_host_activate to ahci.c and just call ata_host_activate directly from the others users of ahci_host_activate. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-06Merge branch 'master' into for-4.9Tejun Heo
2016-08-30pata_ninja32: Avoid corrupting status flagsAlan Cox
Ninja32 needs to set some flags to indicate it does 32bit IO. However it currently assigns this which loses the initializing flag and causes a warning spew. Fix it to use a logical or as is intended. Signed-off-by: Alan Cox <alan@linux.intel.com> Tested-by: Ellmar Stelnberger <estellnb@elstel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-25libata: SCT Write Same handle ATA_DFLAG_PIOShaun Tancheff
Use non DMA write log when ATA_DFLAG_PIO is set. Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25libata: SCT Write Same / DSM TrimShaun Tancheff
Correct handling of devices with sector_size other that 512 bytes. In the case of a 4Kn device sector_size it is possible to describe a much larger DSM Trim than the current fixed default of 512 bytes. This patch assumes the minimum descriptor is sector_size and fills out the descriptor accordingly. The ACS-2 specification is quite clear that the DSM command payload is sized as number of 512 byte transfers so a 4Kn device will operate correctly without this patch. Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25libata: Add support for SCT Write SameShaun Tancheff
SATA drives may support write same via SCT. This is useful for setting the drive contents to a specific pattern (0's). Translate a SCSI WRITE SAME 16 command to be either a DSM TRIM command or an SCT Write Same command. Based on the UNMAP flag: - When set translate to DSM TRIM - When not set translate to SCT Write Same Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25libata: Safely overwrite attached page in WRITE SAME xlatShaun Tancheff
Safely overwriting the attached page to ATA format from the SCSI formatted variant. Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Tejun Heo <tj@kernel.org>
2016-08-11ahci: disable correct irq for dummy portsChristoph Hellwig
irq already contains the interrupt number for the port, don't add the port index to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: d684a90d38e2 ("ahci: per-port msix support") Cc: stable@vger.kernel.org v4.5+
2016-08-11ahci: also use a per-port lock for the multi-MSIX caseChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10ahci: st: Add ports-implemented property in supportPatrice Chotard
Despite ST AHCI version = 1.3, reading HOST_PORTS_IMPL returns 0. So force_port_map to 1 by using ports-implemented DT property. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10ahci: qoriq: enable snoopable sata read and writeTang Yuantian
By default the SATA IP on the qoriq SoCs does not generating coherent/snoopable transactions. This patch enable it in the sata axicc register. In addition, the dma-coherent property must be set on the SATA controller nodes. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10ahci: qoriq: adjust sata parameterTang Yuantian
The default values for Port Phy2Cfg register and Port Phy3Cfg register are better, no need to overwrite them. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-09libata-scsi: fix MODE SELECT translation for Control mode pageTom Yan
scsi_done() was called repeatedly and apparently because of that, the kernel would call trace when we touch the Control mode page: Call Trace: [<ffffffff812ea0d2>] dump_stack+0x63/0x81 [<ffffffff81079cfb>] __warn+0xcb/0xf0 [<ffffffff81079e2d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa00f51b0>] ata_eh_finish+0xe0/0xf0 [libata] [<ffffffffa00fb830>] sata_pmp_error_handler+0x640/0xa50 [libata] [<ffffffffa00470ed>] ahci_error_handler+0x1d/0x70 [libahci] [<ffffffffa00f55f0>] ata_scsi_port_error_handler+0x430/0x770 [libata] [<ffffffffa00eff8d>] ? ata_scsi_cmd_error_handler+0xdd/0x160 [libata] [<ffffffffa00f59d7>] ata_scsi_error+0xa7/0xf0 [libata] [<ffffffffa00913ba>] scsi_error_handler+0xaa/0x560 [scsi_mod] [<ffffffffa0091310>] ? scsi_eh_get_sense+0x180/0x180 [scsi_mod] [<ffffffff81098eb8>] kthread+0xd8/0xf0 [<ffffffff815d913f>] ret_from_fork+0x1f/0x40 [<ffffffff81098de0>] ? kthread_worker_fn+0x170/0x170 ---[ end trace 8b7501047e928a17 ]--- Removed the unnecessary code and let ata_scsi_translate() do the job. Also, since ata_mselect_control() has no ATA command to send to the device, ata_scsi_mode_select_xlat() should return 1 for it, so that ata_scsi_translate() will finish early to avoid ata_qc_issue(). Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-09libata-scsi: use u8 array to store mode page copyTom Yan
ata_mselect_*() would initialize a char array for storing a copy of the current mode page. However, char could be signed char. In that case, bytes larger than 127 would be converted to negative number. For example, 0xff from def_control_mpage[] would become -1. This prevented ata_mselect_control() from working at all, since when it did the read-only bits check, there would always be a mismatch. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-27Merge tag 'leds_for_4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-26Merge branch 'for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
2016-07-23Merge branch 'for-4.7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fix from Tejun Heo: "Another fallout from max_sectors bump a couple years ago. The lite-on optical drive times out on large requests" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: LITE-ON CX1-JB256-HP needs lower max_sectors
2016-07-20libata-scsi: better style in ata_msense_*()Tom Yan
`changeable` is the "version" of mode page requested by the user. It will be less confusing/misleading if we do not check it "together" with the setting bits of the drive. Not to mention that we currently have ata_mselect_*() implemented in a way that each of them will serve exclusively a particular bit on each page. The old style will hence make the condition look even more unnecessarily arcane if the ata_msense_*() is reflecting more than one bit. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-20AHCI: Clear GHC.IS to prevent unexpectly asserting INTxPang Raymond
Due to PCI subsystem behaviour, unloading AHCI driver will disable MSI and enable INTx. When HBA supports MSIx or Multiple MSI, Driver's irq handler doesn't clear GHC.IS register. It works well when reading or writing data and GHC.IS is always non-zero. But when unloading driver (or any other operation which causes disable MSIx and enable INTx), PCI subsystem uses config write(Rx04.bit10) to enable INTx. Because GHC.IS is non-zero, HBA will falsely assume some port needs interrupt service. Then it asserts INTx. To make things worse, when AHCI controller shares the same interrupt pin with other PCI device, that PCI device's ISR will be called and nobody de-asserts previous INTx. This patch clears GHC.IS in ahci_port_stop() even when using MSIx or MMSI to prevent this case. It ensures GHC.IS is zero before PCI subsystem enables INTx. tj: Minor updates to the comment. Signed-off-by: Raymond Pang <raymond_rule@hotmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-19ata: sata_dwc_460ex: remove redundant dev_err callWei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*Christoph Hellwig
This avoid the need to always translate between the two in ata_prot_flags and generally cleans up the taskfile protocol usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18libata: remove ata_is_nodataChristoph Hellwig
The only caller can just check for !ata_is_data instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18libata: LITE-ON CX1-JB256-HP needs lower max_sectorsTejun Heo
Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Cc: stable@vger.kernel.org # v3.19+ Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: minor cleanup for ata_scsi_zbc_out_xlatDamien Le Moal
The reset_all variable name is misleading as this bit is also applicable to open, close, and finish actions. So rename that variable to "all" and remove the unnecessary mask operation that's already done earlier. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: split from the previous patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: Fix ZBC management out command translationDamien Le Moal
The subcommand for NCQ NON-DATA must be specified in the feature (low byte), not the high-order count byte. Also make sure to properly cast the all bit to a u16 before shiting it by 8 to avoid undefined behavior. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: split the original patch into two, updated changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: Fix translation of REPORT ZONES commandDamien Le Moal
Include reporting options when translating REPORT ZONES commmand to ATA NCQ, and make sure we only look at the actually specified bits in the CDB for the options. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: update patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15ata: Handle ATA NCQ NO-DATA commands correctlyHannes Reinecke
Add a new taskfile protocol ATA_PROT_NCQ_NODATA to handle ATA NCQ NO-DATA commands correctly. And fixup ata_scsi_zbc_out_xlat() to use it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14libata-eh: decode all taskfile protocolsHannes Reinecke
Some taskfile protocol values where missing in ata_eh_link_report(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14ata: fixup ATA_PROT_NODATAHannes Reinecke
The taskfile protocol is a numeric value, and can not be ORed. Currently this is harmless as the protocol is always zeroed before, but if it ever has a non-zero value the ORing would create incorrect results. Signed-off-by: Hannes Reinecke <hare@suse.de> [hch: updated patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14libata: use ata_is_ncq() accessorsHannes Reinecke
Use accessor functions instead of the raw value. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: avoid repeated calculation of number of TRIM rangesTom Yan
Currently libata statically allows only 1-block (512-byte) payload for each TRIM command. Each payload can carry 64 TRIM ranges since each range requires 8 bytes. It is silly to keep doing the calculation (512 / 8) in different places. Hence, define the new ATA_MAX_TRIM_RNUM for the result. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: reject WRITE SAME (16) with n_block that exceeds limitTom Yan
Currently if a WRITE SAME (16) command is issued to the SATL with "number of blocks" that is larger than the "Maximum write same length" (which is the maximum number of blocks per TRIM command allowed in libata, currently 65535 * 512 / 8 blocks), the SATL will accept the command and translate it to a TRIM command with the upper limit. However, according to SBC (as of sbc4r11.pdf), the "device server" should terminate the command with "Invalid field in CDB" in that case. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()Tom Yan
To make it consistent with the recently added ata_mselect_control(). We probably shouldn't have the word "mode" in its name anyway, since that's not the case for other ata_msense_*() / ata_mselect_*() either. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: fix D_SENSE bit relection in control mode pageTom Yan
The bit should always be set to 1 when the requested version of page is "changeable" because we've made it so in ata_mselect_control(). Also, it should always be set to 1 if ATA_DFLAG_D_SENSE is set (when the requested version of page is "current" or "default"). Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12ata: hpt366: fix incorrect mask when checking at cmd_high_timeColin Ian King
According to the HPT366 data sheet, PCI config space dword 0x40-0x43 bits 11:8 specify the primary drive cmd_high_time, however, currently just 3 bits of the 4 are being used because the mask is 0x700 and not 0x0f00. Fix the mask, allowing for the 40MHz clock to be detected. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: correct SPC version descriptorTom Yan
The comment suggests we should be having an SPC-3 version descriptor but the 0260h is the code for "SPC-2 (no version claimed)". Correct it to 0300h so that it has the "SPC-3 (no version claimed)" descriptor. Note that we are claiming SPC-3 version compatibility in the VERSION field of the standard INQUIRY data. Therefore, I assume the typo was on the code but not on the comment. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: set CmdQue bit in standard INQUIRY data to 1Tom Yan
Avoid performance bottleneck when being SCSI pass-through'd to virtual machines with other OSes (e.g. Windows) via virtio-scsi and scsi-block in qemu. Ref.: https://github.com/YanVugenfirer/kvm-guest-drivers-windows/issues/63 Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: fix SET FEATURES "filtering" for ata_msense_caching()Tom Yan
Without this fix, the DRA bit of the caching mode page would not be updated when the read look-ahead feature is toggled (e.g. with `smartctl --set`), but will only be until, for example, the write cache feature is touched. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: set correct VERSION field for ZAC devicesTom Yan
Commit 856c46639309 ("libata: support device-managed ZAC devices") had the line that "bumps" the VERSION field in standard INQUIRY data removed. Add it back and claim SPC-5 version compatibility, which matches with the current version descriptor "SPC-5 (no version claimed)" that is used for ZAC devices. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06libata-scsi: correct cbd to CDB in commentTom Yan
It's Command Descriptor Block. Also capitalized it. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06libata-scsi: do not respond with "invalid field" for FORMAT UNITTom Yan
It does not make sense and is confusing to respond with "Invalid field in CDB" while we have no support at all implemented for FORMAT UNIT. It is decent to let it go to the default, which will respond with "Invalid command operation code" instead. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-28Merge branch 'for-4.7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Two trivial fixes - one for a bug in the allocation failure path and the other a compiler warning fix" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: sata_mv: fix mis-conversion in mv_write_cached_reg() ata: fix return value check in ahci_seattle_get_port_info()
2016-06-28drivers: ata: pata_arasan_cf: use the same name for the same lockIago Abal
Note that `&acdev->host->lock' and `qc->ap->lock' denote the same lock, and it's particularly confusing to spin_lock on the former but spin_unlock on the latter. Signed-off-by: Iago Abal <mail@iagoabal.eu> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-20leds: convert IDE trigger to common disk triggerStephan Linz
This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
generated by cgit (git 2.34.1) at 2024-07-01 11:45:31 +0000