summaryrefslogtreecommitdiff
path: root/drivers/auxdisplay
AgeCommit message (Collapse)Author
2016-11-30auxdisplay: ht16k33: select framebuffer helper modulesRobin van der Gracht
The new driver caused a rare randconfig failure: drivers/auxdisplay/ht16k33.o:(.data.ht16k33_fb_ops+0xc): undefined reference to `fb_sys_read' drivers/auxdisplay/ht16k33.o:(.data.ht16k33_fb_ops+0x10): undefined reference to `fb_sys_write' This selects the respective helper modules. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10auxdisplay: ht16k33: Driver for LED controllerRobin van der Gracht
Added a driver for the Holtek HT16K33 LED controller with keyscan. Signed-off-by: Robin van der Gracht <robin@protonic.nl> CC: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-06auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displaysPaul Burton
Add a driver for simple ASCII LCD displays found on the MIPS Boston, Malta & SEAD3 development boards. The Boston display is an independent memory mapped device with a simple memory mapped 8 byte register space containing the 8 ASCII characters to display. The Malta display is exposed as part of the Malta board registers, and provides 8 registers each of which corresponds to one of the ASCII characters to display. The SEAD3 display is slightly more complex, exposing an interface to an S6A0069 LCD controller via registers provided by the boards CPLD. However although the displays differ in their register interface, we require similar functionality on each board so abstracting away the differences within a single driver allows us to share a significant amount of code & ensure consistent behaviour. The driver displays the Linux kernel version as the default message, but allows the message to be changed via a character device. Messages longer then the number of characters that the display can show will scroll. This provides different behaviour to the existing LCD display code for the MIPS Malta or MIPS SEAD3 platforms in the following ways: - The default string to display is not "LINUX ON MALTA" or "LINUX ON SEAD3" but "Linux" followed by the version number of the kernel (UTS_RELEASE). - Since that string tends to be significantly longer it scrolls twice as fast, moving every 500ms rather than every 1s. - The LCD won't be updated until the driver is probed, so it doesn't provide the early "LINUX" string. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14062/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-14auxdisplay: ks0108: initialize local parport variableSudip Mukherjee
The local variable ks0108_parport is used by other functions to write to the parallel port. We missed initializing it when we converted the driver to use new Parallel Port codes. Fixes: 4edd70c133f3 ("auxdisplay: ks0108: use new parport device model") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05auxdisplay: ks0108: use new parport device modelSudip Mukherjee
Modify auxdisplay driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05auxdisplay: ks0108: use min_tSudip Mukherjee
Using min_t() is preffered than using min(). Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05auxdisplay: ks0108: start using pr_*Sudip Mukherjee
Start using pr_* macros instead of using printk and in the process define pr_fmt. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05auxdisplay: ks0108: fix refcountSudip Mukherjee
parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Cc: <stable@vger.kernel.org> # 2.6.32+ Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29framebuffer: Use fb_<level>Joe Perches
Neaten and shorten the code using the new fb_<level> macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-05-25auxdisplay: section cleanup in cfag12864bfb driverHenrik Kretzschmar
This fixes a two section mismatches and makes remove() __devexit. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-07auxdisplay: move cfag12864bfb's probe function to .devinit.textUwe Kleine-König
A pointer to cfag12864bfb_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avuton Olrich <avuton@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-01auxdisplay: remove PARPORT dependencyH Hartley Sweeten
Remove PARPORT dependency for Auxiliary Display support. This is not needed since the dependency for the KS0108 driver is PARPORT_PC. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24auxdisplay: small cleanupsAkinobu Mita
- Use BUILD_BUG_ON for CFAG12864B_SIZE instead of runtime-check - Use get_zeroed_page() Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04Miguel Ojeda has movedMiguel Ojeda
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22cfag12864b fixMiguel Ojeda
This one-liner patch fixes a bug in drivers/auxdisplay/cfag12864b.c At cfag12864b_init(), the driver tries to kalloc some memory in the variable cfag12864b_cache. Then, as usual, it checks if the call failed. However, it checks cfag12864b_buffer instead. This patch changes the "cfag12864b_buffer" to "cfag12864b_cache" so the correct variable is checked. Signed-off-by: Miguel Ojeda <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Use menuconfig objects II - auxdisplayJan Engelhardt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01cfag12864bfb: Use sys_ instead of cfb_ framebuffer accessorsAvuton Olrich
Because the framebuffer memory is allocated system RAM, use the sys_ drawing libraries. It also fixes the following compile error: LD .tmp_vmlinux1 drivers/built-in.o:(.data+0x8b48): undefined reference to `cfb_fillrect' drivers/built-in.o:(.data+0x8b50): undefined reference to `cfb_copyarea' drivers/built-in.o:(.data+0x8b58): undefined reference to `cfb_imageblit' [adaplas] Use fb_sys_read/write for the same reasons as above. Signed-off-by: Avuton Olrich <avuton@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10[S390] Kconfig: refine depends statements.Martin Schwidefsky
Refine some depends statements to limit their visibility to the environments that are actually supported. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-20[PATCH] cfag12864b: fix crash when built-in and no parport presentMiguel Ojeda
The problem comes when ks0108/cfag12864b are built-in and no parallel port is present. ks0108_init() is called first, as it should be, but fails to load (as there is no parallel port to use). After that, cfag12864b_init() gets called, without knowing anything about ks0108 failed, and calls ks0108_writecontrol(), which dereferences an uninitialized pointer. Init order is OK, I think. The problem is how to stop cfag12864b_init() being called if ks0108 failed to load. modprobe does it for us, but, how when built-in? Signed-off-by: Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] drivers: add LCD supportMiguel Ojeda Sandonis
Add support for auxiliary displays, the ks0108 LCD controller, the cfag12864b LCD and adds a framebuffer device: cfag12864bfb. - Add a "auxdisplay/" folder in "drivers/" for auxiliary display drivers. - Add support for the ks0108 LCD Controller as a device driver. (uses parport interface) - Add support for the cfag12864b LCD as a device driver. (uses ks0108 LCD Controller driver) - Add a framebuffer device called cfag12864bfb. (uses cfag12864b LCD driver) - Add the usual Documentation, includes, Makefiles, Kconfigs, MAINTAINERS, CREDITS... - Miguel Ojeda will maintain all the stuff above. [rdunlap@xenotime.net: workqueue fixups] [akpm@osdl.org: kconfig fix] Signed-off-by: Miguel Ojeda Sandonis <maxextreme@gmail.com> Cc: Greg KH <greg@kroah.com> Acked-by: Paulo Marques <pmarques@grupopie.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>