summaryrefslogtreecommitdiff
path: root/drivers/base/power
AgeCommit message (Collapse)Author
2017-09-04Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: ACPI / PM: Check low power idle constraints for debug only PM / s2idle: Rename platform operations structure PM / s2idle: Rename ->enter_freeze to ->enter_s2idle PM / s2idle: Rename freeze_state enum and related items PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE ACPI / PM: Prefer suspend-to-idle over S3 on some systems platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle PM / suspend: Define pr_fmt() in suspend.c PM / suspend: Use mem_sleep_labels[] strings in messages PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq() PM / core: Add error argument to dpm_show_time() PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq() PM / s2idle: Rearrange the main suspend-to-idle loop PM / timekeeping: Print debug messages when requested PM / sleep: Mark suspend/hibernation start and finish PM / sleep: Do not print debug messages by default PM / suspend: Export pm_suspend_target_state
2017-09-04Merge branches 'pm-core', 'pm-opp', 'pm-domains', 'pm-cpu' and 'pm-avs'Rafael J. Wysocki
* pm-core: PM / wakeup: Set power.can_wakeup if wakeup_sysfs_add() fails * pm-opp: PM / OPP: Fix get sharing CPUs when hotplug is used PM / OPP: OF: Use pr_debug() instead of pr_err() while adding OPP table * pm-domains: PM / Domains: Convert to using %pOF instead of full_name PM / Domains: Extend generic power domain debugfs PM / Domains: Add time accounting to various genpd states * pm-cpu: PM / CPU: replace raw_notifier with atomic_notifier * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for RV1108
2017-08-25PM / Domains: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-11PM / s2idle: Rename freeze_state enum and related itemsRafael J. Wysocki
Rename the freeze_state enum representing the suspend-to-idle state machine states to s2idle_states and rename the related variables and functions accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08PM / wakeup: Set power.can_wakeup if wakeup_sysfs_add() failsRafael J. Wysocki
Currently, an error from wakeup_sysfs_add() in device_set_wakeup_capable() causes the device's power.can_wakeup flag to remain unset even though the device technically is capable of signaling wakeup. If wakeup_sysfs_add() fails user space may not be able to enable the device to wake up the system from sleep states, but at least for some devices that does not matter. For this reason, set or clear power.can_wakeup upfront and if wakeup_sysfs_add() returns an error, print a message to the log. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01PM / OPP: Fix get sharing CPUs when hotplug is usedWaldemar Rymarkiewicz
We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does not exist. This can happen on platforms where not all possible CPUs are available at start up ie. hotplugged out. The CPU device is not registered in the system so we are not able to check struct device to set the sharing CPUs bitmask properly. Example (real use case): 2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to register opp_table due to the fact there is no struct device for cpu1 (remains offline at bootup). To solve the bug, stop using device struct to check device_node. Instead get CPU device_node directly from device tree with of_get_cpu_node(). Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq()Rafael J. Wysocki
Restore the pm_wakeup_pending() check in __device_suspend_noirq() removed by commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) as that allows the function to return earlier if there's a wakeup event pending already (so that it may spend less time on carrying out operations that will be reversed shortly anyway) and rework the main suspend-to-idle loop to take that optimization into account. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / core: Add error argument to dpm_show_time()Rafael J. Wysocki
Make the core device suspend/resume code also call dpm_show_time() on failures and add an error argument to this function so that the message printed by it can reflect the success or failure condition. This makes the debug messages in question look less confusing in the failing cases. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()Rafael J. Wysocki
Put the device interrupts disabling and enabling as well as cpuidle_pause() and cpuidle_resume() called during the "noirq" stages of system suspend into separate functions to allow the core suspend-to-idle code to be optimized (later). The only functional difference this makes is that debug facilities and diagnostic tools will not include the above operations into the "noirq" device suspend/resume duration measurements. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / Domains: Extend generic power domain debugfsThara Gopinath
This patch extends the existing generic power domain debugfs. Changes involve the following - Introduce a unique debugfs entry for each generic power domain with the following attributes - current_state - Displays current state of the domain. - devices - Displays the devices associated with this domain. - sub_domains - Displays the sub power domains. - active_time - Displays the time the domain was in active state in ms. - total_idle_time - Displays the time the domain was in any of the idle states in ms. - idle_states - Displays the various idle states and the time spent in each idle state in ms. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / Domains: Add time accounting to various genpd statesThara Gopinath
This patch adds support to calculate the time spent by the generic power domains in on and various idle states. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22PM / sleep: Do not print debug messages by defaultRafael J. Wysocki
Debug messages from the system suspend/hibernation infrastructure can fill up the entire kernel log buffer in some cases and anyway they are only useful for debugging. They depend on CONFIG_PM_DEBUG, but that is set as a rule as some generally useful diagnostic facilities depend on it too. For this reason, avoid printing those messages by default, but make it possible to turn them on as needed with the help of a new sysfs attribute under /sys/power/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20Merge branches 'intel_pstate' and 'pm-domains'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Correct the busy calculation for KNL * pm-domains: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
2017-07-19PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if ↵Sudeep Holla
present If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data) Cc: 4.4+ <stable@vger.kernel.org> # v4.4+ Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-16PM / OPP: OF: Use pr_debug() instead of pr_err() while adding OPP tableViresh Kumar
Some platforms add the OPPs dynamically from platform specific drivers instead of getting them statically from DT. The cpufreq-dt driver already ignores the return value of dev_pm_opp_of_cpumask_add_table() to not error out for such cases, but we still end up printing error message from that routine. That's not nice. Convert the print message to use pr_debug() instead. Reported-by: Mason <slash.tmp@free.fr> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-14Merge branches 'pm-qos' and 'pm-devfreq'Rafael J. Wysocki
* pm-qos: PM / QoS: return -EINVAL for bogus strings * pm-devfreq: PM / devfreq: constify attribute_group structures. PM / devfreq: tegra: fix error return code in tegra_devfreq_probe() PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()
2017-07-12PM / QoS: return -EINVAL for bogus stringsDan Carpenter
In the current code, if the user accidentally writes a bogus command to this sysfs file, then we set the latency tolerance to an uninitialized variable. Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-10Merge tag 'pm-extra-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These revert one recent change in the generic power domains framework, fix a recently introduced build issue in there and constify attribute_group structures in some places. Specifics: - Revert a recent change in the generic power domains (genpd) framework that led to regressions and turned out the be misguided (Rafael Wysocki). - Fix a recently introduced build issue in the generic power domains (genpd) framework (Arnd Bergmann). - Constify attribute_group structures in the PM core, the cpufreq stats code and in intel_pstate (Arvind Yadav)" * tag 'pm-extra-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: constify attribute_group structures cpufreq: cpufreq_stats: constify attribute_group structures PM / sleep: constify attribute_group structures PM / Domains: provide pm_genpd_poweroff_noirq() stub Revert "PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device"
2017-07-10Merge branches 'pm-domains', 'pm-sleep' and 'pm-cpufreq'Rafael J. Wysocki
* pm-domains: PM / Domains: provide pm_genpd_poweroff_noirq() stub Revert "PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device" * pm-sleep: PM / sleep: constify attribute_group structures * pm-cpufreq: cpufreq: intel_pstate: constify attribute_group structures cpufreq: cpufreq_stats: constify attribute_group structures
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-07-04PM / Domains: provide pm_genpd_poweroff_noirq() stubArnd Bergmann
When CONFIG_PM_SLEEP is disabled, we don't have a pm_genpd_poweroff_noirq function definition: drivers/base/power/domain.c: In function 'pm_genpd_init': drivers/base/power/domain.c:1549:37: error: 'pm_genpd_poweroff_noirq' undeclared (first use in this function); did you mean 'genpd_power_off_unused'? This adds another NULL definition for it, just like we already have for the other _noirq handlers. Fixes: 10da65423fdb (PM / Domains: Call driver's noirq callbacks) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04Revert "PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd ↵Rafael J. Wysocki
device" Revert commit 8b55e55ee443 (PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device) which was misguided (the change made by it was not necessary) and it introduced a call to a function that may sleep into an atomic context code path. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-03Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems platform: x86: intel-hid: Wake up the system from suspend-to-idle platform: x86: intel-vbtn: Wake up the system from suspend-to-idle ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle platform/x86: Add driver for ACPI INT0002 Virtual GPIO device PCI / PM: Restore PME Enable if skipping wakeup setup PM / sleep: Print timing information if debug is enabled ACPI / PM: Clean up device wakeup enable/disable code ACPI / PM: Change log level of wakeup-related message USB / PCI / PM: Allow the PCI core to do the resume cleanup ACPI / PM: Run wakeup notify handlers synchronously Conflicts: drivers/base/power/main.c
2017-07-03Merge branches 'pm-domains', 'pm-avs' and 'powercap'Rafael J. Wysocki
* pm-domains: PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / Domains: Constify genpd pointer PM / Domains: pdd->dev can't be NULL in genpd_dev_pm_qos_notifier() * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3228 * powercap: powercap/RAPL: prevent overridding bits outside of the mask
2017-07-03Merge branches 'pm-core', 'pm-opp' and 'pm-qos'Rafael J. Wysocki
* pm-core: PM / sysfs: Constify attribute groups PM: Constify info string used in messages PM: Constify returned PM event name PM / wakeirq: Convert to SRCU * pm-opp: PM / OPP: Add dev_pm_opp_{set|put}_clkname() PM / OPP: Use - instead of @ for DT entries PM / OPP: Don't create debugfs "supply-0" directory unnecessarily PM / OPP: opp-microvolt is not optional if regulators are set PM / OPP: Don't create copy of regulators unnecessarily PM / OPP: Reorganize _generic_set_opp_regulator() * pm-qos: PM / QoS: constify *_attribute_group.
2017-06-29PM / Domains: Fix missing default_power_down_ok commentKrzysztof Kozlowski
Commit fc5cbf0c94b6 (PM / Domains: Support for multiple states) split out some code out of default_power_down_ok() function so the documentation has to be moved to appropriate place. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29PM / Domains: Fix unsafe iteration over modified list of domainsKrzysztof Kozlowski
of_genpd_remove_last() iterates over list of domains and removes matching element thus it has to use safe version of list iteration. Fixes: 17926551c98a (PM / Domains: Add support for removing nested PM domains by provider) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29PM / Domains: Fix unsafe iteration over modified list of domain providersKrzysztof Kozlowski
of_genpd_del_provider() iterates over list of domain provides and removes matching element thus it has to use safe version of list iteration. Fixes: aa42240ab254 (PM / Domains: Add generic OF-based PM domain look-up) Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29PM / Domains: Fix unsafe iteration over modified list of device linksKrzysztof Kozlowski
pm_genpd_remove_subdomain() iterates over domain's master_links list and removes matching element thus it has to use safe version of list iteration. Fixes: f721889ff65a ("PM / Domains: Support for generic I/O PM domains (v8)") Cc: 3.1+ <stable@vger.kernel.org> # 3.1+ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd deviceKrzysztof Kozlowski
genpd_syscore_switch() had two problems: 1. It silently assumed that device, it is being called for, belongs to generic power domain and used container_of() on its power domain pointer. Such assumption might not be true always. 2. It iterated over list of generic power domains without holding gpd_list_lock mutex thus list could have been modified at the same time. Usage of genpd_lookup_dev() solves both problems as it is safe a call for non-generic power domains and uses mutex when iterating. Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29PM / Domains: Call driver's noirq callbacksMikko Perttunen
Currently genpd installs its own noirq callbacks, but never calls down to the driver's corresponding callbacks. Add these calls. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28PM / QoS: constify *_attribute_group.Arvind Yadav
File size before: text data bss dec hex filename 3890 1152 8 5050 13ba drivers/base/power/sysfs.o File size After adding 'const': text data bss dec hex filename 4250 800 8 5058 13c2 drivers/base/power/sysfs.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28PM / sysfs: Constify attribute groupsKrzysztof Kozlowski
Local instances of struct attribute_group are not modified so they can be made const to increase code safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28PM: Constify info string used in messagesKrzysztof Kozlowski
The 'info' string appearing in many places points to a .rodata string so it should be passes as pointer to const. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28PM: Constify returned PM event nameKrzysztof Kozlowski
The pm_verb() returns a pointer to string from .rodata so it should be marked as const. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28PM / Domains: Constify genpd pointerKrzysztof Kozlowski
Mark pointer to struct generic_pm_domain const (either passed in argument or used localy in a function), whenever it is not modifed by the function itself. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27PM / wakeirq: Convert to SRCUThomas Gleixner
The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That breaks the irq bus locking infrastructure, which is allows sleeping functions to be called so interrupt controllers behind slow busses, e.g. i2c, can be handled. The wakeirq functions hold rcu_read_lock and call into irq functions, which in case of interrupts using the irq bus locking will trigger a might_sleep() splat. Convert the wakeirq infrastructure to Sleepable RCU and unbreak it. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Brian Norris <briannorris@chromium.org> Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Brian Norris <briannorris@chromium.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24PM / OPP: Add dev_pm_opp_{set|put}_clkname()Viresh Kumar
In order to support OPP switching, OPP layer needs to get pointer to the clock for the device. Simple cases work fine without using the routines added by this patch (i.e. by passing connection-id as NULL), but for a device with multiple clocks available, the OPP core needs to know the exact name of the clk to use. Add a new set of APIs to get that done. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22PM / OPP: Don't create debugfs "supply-0" directory unnecessarilyViresh Kumar
We create "supply-0" debugfs directory even if the device doesn't do voltage scaling. That looks confusing, as if the regulator is found but we never managed to get voltage levels for it. Avoid creating such a directory unnecessarily. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22PM / OPP: opp-microvolt is not optional if regulators are setViresh Kumar
If dev_pm_opp_set_regulators() is called for a device and its regulators are set in the OPP core, the OPP nodes for the device must contain the "opp-microvolt" property, otherwise there is something wrong and we better error out. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22PM / OPP: Don't create copy of regulators unnecessarilyViresh Kumar
This code was required while the OPP core was managed with help of RCUs, but not anymore. Get rid of unnecessary alloc/memcpy operations. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22PM / OPP: Reorganize _generic_set_opp_regulator()Viresh Kumar
The code was overly complicated here because of the limitations that we had with RCUs (Couldn't use opp-table and OPPs outside RCU protected section and can't call sleep-able routines from within that). But that is long gone now. Reorganize _generic_set_opp_regulator() in order to avoid using "struct dev_pm_set_opp_data" and copying data into it for the case where opp_table->set_opp is not set. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22PM / Domains: pdd->dev can't be NULL in genpd_dev_pm_qos_notifier()Viresh Kumar
The pm_domain_data (pdd) pointer is set from genpd_alloc_dev_data() and pdd->dev is guaranteed to be valid. There is no need to check pdd and pdd->dev in rest of the code as pdd->dev will always be valid for a non NULL pdd pointer. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-18Merge tag 'tegra-for-4.13-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers soc/tegra: Changes for v4.13-rc1 This contains an implementation of generic PM domains for Tegra186, based on the BPMP powergate request. * tag 'tegra-for-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-15ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idleRafael J. Wysocki
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15PM / sleep: Print timing information if debug is enabledRafael J. Wysocki
Avoid printing the device suspend/resume timing information if CONFIG_PM_DEBUG is not set to reduce the log noise level. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-13PM / Domains: Allow overriding the ->xlate() callbackThierry Reding
Allow generic power domain providers to override the ->xlate() callback in case the default genpd_xlate_onecell() translation callback is not good enough. One potential use-case for this is to allow generic power domains to be specified by an ID rather than an index. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-09Merge branches 'intel_pstate' and 'pm-sleep'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min() * pm-sleep: Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
2017-06-07Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"Rafael J. Wysocki
Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) as it turned out to be premature and triggered a number of different issues on various systems. That includes, but is not limited to, premature suspend-to-RAM aborts on Dell XPS 13 (9343) reported by Dominik. The issue the commit in question attempted to address is real and will need to be taken care of going forward, but evidently more work is needed for this purpose. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-22Merge branches 'pm-sleep' and 'powercap'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Declare variables as static RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() * powercap: PowerCap: Fix an error code in powercap_register_zone()
generated by cgit (git 2.34.1) at 2024-06-03 07:23:47 +0000