summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2019-01-19Merge tag 'regmap-fix-v5.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "The cleanups for the way we handle type information introduced during the merge window revealed that we'd been abusing the irq APIs for a long time, causing breakage for systems. This has a couple of minimal fixes for that which restore the previous behaviour for the time being, we'll fix it properly for v5.1 but that'd be a bit much to do as a bug fix" * tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: do not write mask register if mask_base is zero regmap: regmap-irq: silently ignore unsupported type settings
2019-01-14regmap-irq: do not write mask register if mask_base is zeroMark Zhang
If client have not provided the mask base register then do not write into the mask register. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-10PM-runtime: Fix autosuspend_delay on 32bits archVincent Guittot
Cast autosuspend_delay to u64 to make sure that the full computation of 'expires' or slack will be done in u64, even on 32bits arch. Otherwise, any delay greater than 2^31 nsec can overflow if signed 32bits is used when converting delay from msec to nsec. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10PM-runtime: Fix 'jiffies' in comments after switch to hrtimersLadislav Michl
PM-runtime now uses the hrtimers infrastructure for autosuspend, however comments still reference 'jiffies'. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-07Merge branch 'regmap-4.21' into regmap-5.0Mark Brown
2019-01-05Merge branch 'mount.part1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API prep from Al Viro: "Mount API prereqs. Mostly that's LSM mount options cleanups. There are several minor fixes in there, but nothing earth-shattering (leaks on failure exits, mostly)" * 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits) mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT smack: rewrite smack_sb_eat_lsm_opts() smack: get rid of match_token() smack: take the guts of smack_parse_opts_str() into a new helper LSM: new method: ->sb_add_mnt_opt() selinux: rewrite selinux_sb_eat_lsm_opts() selinux: regularize Opt_... names a bit selinux: switch away from match_token() selinux: new helper - selinux_add_opt() LSM: bury struct security_mnt_opts smack: switch to private smack_mnt_opts selinux: switch to private struct selinux_mnt_opts LSM: hide struct security_mnt_opts from any generic code selinux: kill selinux_sb_get_mnt_opts() LSM: turn sb_eat_lsm_opts() into a method nfs_remount(): don't leak, don't ignore LSM options quietly btrfs: sanitize security_mnt_opts use selinux; don't open-code a loop in sb_finish_set_opts() LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount() new helper: security_sb_eat_lsm_opts() ...
2019-01-04drivers/base/platform.c: kmemleak ignore a known leakQian Cai
unreferenced object 0xffff808ec6dc5a80 (size 128): comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s) hex dump (first 32 bytes): ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500 [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8 [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450 [<00000000ef135642>] acpi_default_enumeration+0x34/0x78 [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000002968643e>] acpi_bus_scan+0xb0/0x110 [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410 [<00000000965b3c5a>] acpi_init+0x408/0x49c [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4 [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c [<0000000070ea6c15>] kernel_init+0x18/0x138 [<00000000fb8fff06>] ret_from_fork+0x10/0x1c [<0000000041273a0d>] 0xffffffffffffffff Then, faddr2line pointed out this line, /* * This memory isn't freed when the device is put, * I don't have a nice idea for that though. Conceptually * dma_mask in struct device should not be a pointer. * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 */ pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); Since this leak has existed for more than 8 years and it does not reference other parts of the memory, let kmemleak ignore it, so users don't need to waste time reporting this in the future. Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02Merge tag 'devprop-4.21-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fixes from Rafael Wysocki: "Fix two potential NULL pointer dereferences found by Coverity in the software nodes code introduced recently (Colin Ian King)" * tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: check if swnode is NULL before dereferencing it drivers: base: swnode: check if pointer p is NULL before dereferencing it
2019-01-02PM: sleep: call devfreq suspend/resumeLukasz Luba
Devfreq framework supports suspend of its devices. Call the the devfreq interface and allow devfreq devices preserve/restore their states during suspend/resume. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-31regmap: regmap-irq: silently ignore unsupported type settingsMatti Vaittinen
Do not return error if irq-type setting is requested for controlloer which does not support this. This is how regmap-irq has previously handled the undupported type settings and existing drivers seem to be upset if failure is now reported. Fixes: 1c2928e3e321 ("regmap: regmap-irq/gpio-max77620: add level-irq support") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-28Merge tag 'driver-core-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 4.21-rc1. It's not really big, just a number of small changes for some reported issues, some documentation updates to hopefully make it harder for people to abuse the driver model, and some other minor cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: mm, memory_hotplug: update a comment in unregister_memory() component: convert to DEFINE_SHOW_ATTRIBUTE sysfs: Disable lockdep for driver bind/unbind files driver core: Add missing dev->bus->need_parent_lock checks kobject: return error code if writing /sys/.../uevent fails driver core: Move async_synchronize_full call driver core: platform: Respect return code of platform_device_register_full() kref/kobject: Improve documentation drivers/base/memory.c: Use DEVICE_ATTR_RO and friends driver core: Replace simple_strto{l,ul} by kstrtou{l,ul} kernfs: Improve kernfs_notify() poll notification latency kobject: Fix warnings in lib/kobject_uevent.c kobject: drop unnecessary cast "%llu" for u64 driver core: fix comments for device_block_probing() driver core: Replace simple_strtol by kstrtoint
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...
2018-12-28memory_hotplug: add missing newlines to debugging outputMichal Hocko
pages_correctly_probed is missing new lines which means that the line is not printed rightaway but it rather waits for additional printks. Add \n to all three messages in pages_correctly_probed. Link: http://lkml.kernel.org/r/20181218162307.10518-1-mhocko@kernel.org Fixes: b77eab7079d9 ("mm/memory_hotplug: optimize probe routine") Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28drivers/base/memory.c: remove an unnecessary check on NR_MEM_SECTIONSWei Yang
In cb5e39b8038b ("drivers: base: refactor add_memory_section() to add_memory_block()"), add_memory_block() is introduced, which is only invoked in memory_dev_init(). When combining these two loops in memory_dev_init() and add_memory_block(), they looks like this: for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block) for (j = i; (j < i + sections_per_block) && j < NR_MEM_SECTIONS; j++) Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory block, the check of (j < NR_MEM_SECTIONS) is not necessary. This patch just removes this check. Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Seth Jennings <sjenning@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-26drivers: base: swnode: check if swnode is NULL before dereferencing itColin Ian King
The to_software_mode() macro can potentially return NULL, so also add a NULL check on swnode before dereferencing it to avoid any NULL pointer dereferences. Detected by CoverityScan, CID#1476052 ("Explicit null dereferenced") Fixes: 59abd83672f7 (drivers: base: Introducing software nodes to the firmware node framework) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-26drivers: base: swnode: check if pointer p is NULL before dereferencing itColin Ian King
The pointer p can be potentially NULL as macro to_software_node can return NULL. Add null check on p before dereferencing it to avoid any NULL pointer dereferences. Detected by CoverityScan, CID#1476039 ("Explicit null dereferenced") Fixes: 59abd83672f7 (drivers: base: Introducing software nodes to the firmware node framework) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-25Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt department provides: Core updates: - Better spreading to NUMA nodes in the affinity management - Support for more than one set of interrupts to spread out to allow separate queues for separate functionality of a single device. - Decouple the non queue interrupts from being managed. Those are usually general interrupts for error handling etc. and those should never be shut down. This also a preparation to utilize the spreading mechanism for initial spreading of non-managed interrupts later. - Make the single CPU target selection in the matrix allocator more balanced so interrupts won't accumulate on single CPUs in certain situations. - A large spell checking patch so we don't end up fixing single typos over and over. Driver updates: - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer) - Updates for the 8MQ, F1C100s platform drivers - A number of SPDX cleanups - A workaround for a very broken GICv3 implementation on msm8996 which sports a botched register set. - A platform-msi fix to prevent memory leakage - Various cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) genirq/affinity: Add is_managed to struct irq_affinity_desc genirq/core: Introduce struct irq_affinity_desc genirq/affinity: Remove excess indentation irqchip/stm32: protect configuration registers with hwspinlock dt-bindings: interrupt-controller: stm32: Document hwlock properties irqchip: Add driver for imx-irqsteer controller dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer irqchip: Add driver for Cirrus Logic Madera codecs genirq: Fix various typos in comments irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init() irqchip/irq-imx-gpcv2: Silence "fall through" warning irqchip/gic-v3: Add quirk for msm8996 broken registers irqchip/gic: Add support to device tree based quirks dt-bindings/gic-v3: Add msm8996 compatible string irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s irqchip/sun4i: Move IC specific register offsets to struct irqchip/sun4i: Add a struct to hold global variables dt-bindings: interrupt-controller: Add suniv interrupt-controller irqchip: Add RDA8810PL interrupt driver ...
2018-12-25Merge tag 'devprop-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "This introduces 'software nodes' that are analogous to the DT and ACPI firmware nodes except that they can be created by drivers themselves and do a couple of assorted cleanups. Specifics: - Introduce "software nodes", analogous to the DT and ACPI firmware nodes except that they can be created by kernel code, in order to complement fwnodes representing real firmware nodes when they are incomplete (for example missing device properties) and to supply the primary fwnode when the firmware lacks hardware description for a device completely, and replace the "property_set" struct fwnode_handle type with software nodes (Heikki Krogerus). - Clean up the just introduced software nodes support and fix a commet in the graph-handling code (Colin Ian King, Marco Felsch)" * tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: fix fwnode_graph_get_next_endpoint() documentation drivers: base: swnode: remove need for a temporary string for the node name device property: Remove struct property_set device property: Move device_add_properties() to swnode.c drivers: base: Introducing software nodes to the firmware node framework ACPI / glue: Add acpi_platform_notify() function drivers core: Prepare support for multiple platform notifications driver core: platform: Remove duplicated device_remove_properties() call
2018-12-25Merge tag 'regmap-v4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This has been a busy release for the regmap-irq code, there's several new features been added, including an API cleanup for how we specify types that affected one existing driver (gpio-max77620): - Support for hardware that flags rising and falling edges on separate status bits from Bartosz Golaszewski. - Support for explicitly clearing interrupts before unmasking from Bartosz Golaszewski. - Support for level triggered IRQs from Matti Vaittinen" * tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: irq: add an option to clear status registers on unmask regmap: regmap-irq/gpio-max77620: add level-irq support regmap: regmap-irq: Remove default irq type setting from core regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE regmap: irq: handle HW using separate rising/falling edge interrupts regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)
2018-12-21Merge branches 'pm-core', 'pm-qos', 'pm-domains' and 'pm-sleep'Rafael J. Wysocki
* pm-core: PM-runtime: Switch autosuspend over to using hrtimers * pm-qos: PM / QoS: Change to use DEFINE_SHOW_ATTRIBUTE macro * pm-domains: PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops() * pm-sleep: PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-20vfs: Suppress MS_* flag defs within the kernel unless explicitly enabledDavid Howells
Only the mount namespace code that implements mount(2) should be using the MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is included. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20mm, memory_hotplug: update a comment in unregister_memory()Dan Carpenter
The remove_memory_block() function was renamed to in commit cc292b0b4302 ("drivers/base/memory.c: rename remove_memory_block() to remove_memory_section()"). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20component: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2018-12-19Merge branch 'regmap-4.21' into regmap-nextMark Brown
2018-12-19regmap: irq: add an option to clear status registers on unmaskBartosz Golaszewski
Some interrupt controllers whose interrupts are acked on read will set the status bits for masked interrupts without changing the state of the IRQ line. Some chips have an additional "feature" where if those set bits are not cleared before unmasking their respective interrupts, the IRQ line will change the state and we'll interpret this as an interrupt although it actually fired when it was masked. Add a new field to the irq chip struct that tells the regmap irq chip code to always clear the status registers before actually changing the irq mask values. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19regmap: regmap-irq/gpio-max77620: add level-irq supportMatti Vaittinen
Add level active IRQ support to regmap-irq irqchip. Change breaks existing regmap-irq type setting. Convert the existing drivers which use regmap-irq with trigger type setting (gpio-max77620) to work with this new approach. So we do not magically support level-active IRQs on gpio-max77620 - but add support to the regmap-irq for chips which support them =) We do not support distinguishing situation where HW supports rising and falling edge detection but not both. Separating this would require inventing yet another flags for IRQ types. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19regmap: regmap-irq: Remove default irq type setting from coreMatti Vaittinen
The common code should not set IRQ type. Read HW defaults to the cache at startup instead of forcing type to EDGE_BOTH. If default setting is needed this should be done via normal mechanisms or by chip specific code if normal mechanisms are not suitable for some reason. Common regmap-irq code should not have defaults hard-coded but keep the HW/boot defaults untouched. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19sysfs: Disable lockdep for driver bind/unbind filesDaniel Vetter
This is the much more correct fix for my earlier attempt at: https://lkml.org/lkml/2018/12/10/118 Short recap: - There's not actually a locking issue, it's just lockdep being a bit too eager to complain about a possible deadlock. - Contrary to what I claimed the real problem is recursion on kn->count. Greg pointed me at sysfs_break_active_protection(), used by the scsi subsystem to allow a sysfs file to unbind itself. That would be a real deadlock, which isn't what's happening here. Also, breaking the active protection means we'd need to manually handle all the lifetime fun. - With Rafael we discussed the task_work approach, which kinda works, but has two downsides: It's a functional change for a lockdep annotation issue, and it won't work for the bind file (which needs to get the errno from the driver load function back to userspace). - Greg also asked why this never showed up: To hit this you need to unregister a 2nd driver from the unload code of your first driver. I guess only gpus do that. The bug has always been there, but only with a recent patch series did we add more locks so that lockdep built a chain from unbinding the snd-hda driver to the acpi_video_unregister call. Full lockdep splat: [12301.898799] ============================================ [12301.898805] WARNING: possible recursive locking detected [12301.898811] 4.20.0-rc7+ #84 Not tainted [12301.898815] -------------------------------------------- [12301.898821] bash/5297 is trying to acquire lock: [12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80 [12301.898841] but task is already holding lock: [12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898856] other info that might help us debug this: [12301.898862] Possible unsafe locking scenario: [12301.898867] CPU0 [12301.898870] ---- [12301.898874] lock(kn->count#39); [12301.898879] lock(kn->count#39); [12301.898883] *** DEADLOCK *** [12301.898891] May be due to missing lock nesting notation [12301.898899] 5 locks held by bash/5297: [12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0 [12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190 [12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240 [12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40 [12301.898960] stack backtrace: [12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84 [12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011 [12301.898982] Call Trace: [12301.898989] dump_stack+0x67/0x9b [12301.898997] __lock_acquire+0x6ad/0x1410 [12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899010] ? find_held_lock+0x2d/0x90 [12301.899017] ? mutex_spin_on_owner+0xe4/0x150 [12301.899023] ? find_held_lock+0x2d/0x90 [12301.899030] ? lock_acquire+0x90/0x180 [12301.899036] lock_acquire+0x90/0x180 [12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899049] __kernfs_remove+0x296/0x310 [12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899060] ? kernfs_name_hash+0xd/0x80 [12301.899066] ? kernfs_find_ns+0x6c/0x100 [12301.899073] kernfs_remove_by_name_ns+0x3b/0x80 [12301.899080] bus_remove_driver+0x92/0xa0 [12301.899085] acpi_video_unregister+0x24/0x40 [12301.899127] i915_driver_unload+0x42/0x130 [i915] [12301.899160] i915_pci_remove+0x19/0x30 [i915] [12301.899169] pci_device_remove+0x36/0xb0 [12301.899176] device_release_driver_internal+0x185/0x240 [12301.899183] unbind_store+0xaf/0x180 [12301.899189] kernfs_fop_write+0x104/0x190 [12301.899195] __vfs_write+0x31/0x180 [12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80 [12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50 [12301.899216] ? __sb_start_write+0x13c/0x1a0 [12301.899221] ? vfs_write+0x17f/0x1b0 [12301.899227] vfs_write+0xb9/0x1b0 [12301.899233] ksys_write+0x50/0xc0 [12301.899239] do_syscall_64+0x4b/0x180 [12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe [12301.899253] RIP: 0033:0x7f452ac7f7a4 [12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4 [12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001 [12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730 [12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d [12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d Looking around I've noticed that usb and i2c already handle similar recursion problems, where a sysfs file can unbind the same type of sysfs somewhere else in the hierarchy. Relevant commits are: commit 356c05d58af05d582e634b54b40050c73609617b Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon May 14 13:30:03 2012 -0400 sysfs: get rid of some lockdep false positives commit e9b526fe704812364bca07edd15eadeba163ebfb Author: Alexander Sverdlin <alexander.sverdlin@nsn.com> Date: Fri May 17 14:56:35 2013 +0200 i2c: suppress lockdep warning on delete_device Implement the same trick for driver bind/unbind. v2: Put the macro into bus.c (Greg). Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19PM / Domains: remove define_genpd_open_function() and ↵Yangtao Li
define_genpd_debugfs_fops() We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define such a macro, so remove define_genpd_open_function and define_genpd_debugfs_fops. Convert them to DEFINE_SHOW_ATTRIBUTE. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-19PM-runtime: Switch autosuspend over to using hrtimersVincent Guittot
PM-runtime uses the timer infrastructure for autosuspend. This implies that the minimum time before autosuspending a device is in the range of 1 tick included to 2 ticks excluded -On arm64 this means between 4ms and 8ms with default jiffies configuration -And on arm, it is between 10ms and 20ms These values are quite high for embedded systems which sometimes want the duration to be in the range of 1 ms. It is possible to switch autosuspend over to using hrtimers to get finer granularity for short durations and take advantage of slack to retain some margins and get long timeouts with minimum wakeups. On an arm64 platform that uses 1ms for autosuspending timeout of its GPU, idle power is reduced by 10% with hrtimer. The latency impact on arm64 hikey octo cores is: - mark_last_busy: from 1.11 us to 1.25 us - rpm_suspend: from 15.54 us to 15.38 us [Only the code path of rpm_suspend() that starts hrtimer has been measured.] arm64 image (arm64 default defconfig) decreases by around 3KB with following details: $ size vmlinux-timer text data bss dec hex filename 12034646 6869268 386840 19290754 1265a82 vmlinux $ size vmlinux-hrtimer text data bss dec hex filename 12030550 6870164 387032 19287746 1264ec2 vmlinux The latency impact on arm 32bits snowball dual cores is : - mark_last_busy: from 0.31 us usec to 0.77 us - rpm_suspend: from 6.83 us to 6.67 usec The increase of the image for snowball platform that I used for testing performance impact, is neglictable (244B). $ size vmlinux-timer text data bss dec hex filename 7157961 2119580 264120 9541661 91981d build-ux500/vmlinux size vmlinux-hrtimer text data bss dec hex filename 7157773 2119884 264248 9541905 919911 vmlinux-hrtimer And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB with following details: $ size vmlinux-timer text data bss dec hex filename 13304443 6803420 402768 20510631 138f7a7 vmlinux $ size vmlinux-hrtimer text data bss dec hex filename 13304299 6805276 402768 20512343 138fe57 vmlinux Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-19driver core: Add missing dev->bus->need_parent_lock checksRafael J. Wysocki
__device_release_driver() has to check dev->bus->need_parent_lock before dropping the parent lock and acquiring it again as it may attempt to drop a lock that hasn't been acquired or lock a device that shouldn't be locked and create a lock imbalance. Fixes: 8c97a46af04b (driver core: hold dev's parent lock when needed) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-18device property: fix fwnode_graph_get_next_endpoint() documentationMarco Felsch
Sync documentation with code. Fixes: 07bb80d40b0e (device property: Add support for remote endpoints) Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18Merge tag 'irqchip-4.21' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer) - Updates for new (and old) platforms (i.MX8MQ, F1C100s) - A number of SPDX cleanups - A workaround for a very broken GICv3 implementation - A platform-msi fix - Various cleanups
2018-12-17regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-17regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-14Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull more operating performance points (OPP) framework changes for v4.21 from Viresh Kumar: "- Fix missing OPP debugfs directory (Viresh Kumar). - Make genpd performance states orthogonal to idlestates (Ulf Hansson). - Propagate performance state changes from genpd to its master (Viresh Kumar). - Minor improvement of some OPP helpers (Viresh Kumar)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: PM / Domains: Propagate performance state updates PM / Domains: Factorize dev_pm_genpd_set_performance_state() PM / Domains: Save OPP table pointer in genpd OPP: Don't return 0 on error from of_get_required_opp_performance_state() OPP: Add dev_pm_opp_xlate_performance_state() helper OPP: Improve _find_table_of_opp_np() PM / Domains: Make genpd performance states orthogonal to the idlestates OPP: Fix missing debugfs supply directory for OPPs OPP: Use opp_table->regulators to verify no regulator case
2018-12-14PM / Domains: Propagate performance state updatesViresh Kumar
Currently a genpd only handles the performance state requirements from the devices under its control. This commit extends that to also handle the performance state requirement(s) put on the master genpd by its sub-domains. There is a separate value required for each master that the genpd has and so a new field is added to the struct gpd_link (link->performance_state), which represents the link between a genpd and its master. The struct gpd_link also got another field prev_performance_state, which is used by genpd core as a temporary variable during transitions. On a call to dev_pm_genpd_set_performance_state(), the genpd core first updates the performance state of the masters of the device's genpd and then updates the performance state of the genpd. The masters do the same and propagate performance state updates to their masters before updating their own. The performance state transition from genpd to its master is done with the help of dev_pm_opp_xlate_performance_state(), which looks at the OPP tables of both the domains to translate the state. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14PM / Domains: Factorize dev_pm_genpd_set_performance_state()Viresh Kumar
Separate out _genpd_set_performance_state() and _genpd_reeval_performance_state() from dev_pm_genpd_set_performance_state() to handle performance state update related stuff. This will be used by a later commit. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14PM / Domains: Save OPP table pointer in genpdViresh Kumar
dev_pm_genpd_set_performance_state() will be required to call dev_pm_opp_xlate_performance_state() going forward to translate from performance state of a sub-domain to performance state of its master. And dev_pm_opp_xlate_performance_state() needs pointers to the OPP tables of both genpd and its master. Lets fetch and save them while the OPP tables are added. Fetching the OPP tables should never fail as we just added the OPP tables and so add a WARN_ON() for such a bug instead of full error paths. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-14PM / Domains: Make genpd performance states orthogonal to the idlestatesUlf Hansson
It's quite questionable whether genpd internally should care about if the corresponding PM domain for a device is powered on, as to allow setting a new performance state for it. The assumptions creates an unnecessary limitation at this point, for both consumers and providers, but more importantly it also makes the code more complicated. Therefore, let's simplify the code to allow setting a performance state, by invoking the ->set_performance_state() callback, no matter whether the PM domain is powered on or off. Do note, this change means genpd providers needs to restore the performance state themselves during power on, via the ->power_on() callback. Moreover, they may also need to check that the PM domain is powered on, from their ->set_performance_state() callback, before deciding to update the state. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-12-13ACPI / scan: Refactor _CCA enforcementRobin Murphy
Rather than checking the DMA attribute at each callsite, just pass it through for acpi_dma_configure() to handle directly. That can then deal with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly installing dummy DMA ops instead of just skipping setup entirely. This will then free up the dev->dma_ops == NULL case for some valuable fastpath optimisations. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13dma-mapping: move dma_get_required_mask to kernel/dmaChristoph Hellwig
dma_get_required_mask should really be with the rest of the DMA mapping implementation instead of in drivers/base as a lone outlier. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13regmap: irq: handle HW using separate rising/falling edge interruptsBartosz Golaszewski
Some interrupt controllers use separate bits for controlling rising and falling edge interrupts in the mask register i.e. they have one interrupt for rising edge and one for falling. We already handle the case where we have a single interrupt in the mask register and a separate type configuration register. Add a new switch to regmap_irq_chip which tells the framework to use the mask_base address for configuring the edge of the interrupts that define type_falling/rising_mask values. For such interrupts we never update the type_base bits. For interrupts that don't define type masks or their regmap irq chip doesn't set the type_in_mask to true everything stays the same. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13platform-msi: Free descriptors in platform_msi_domain_free()Miquel Raynal
Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a7666 ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-11drivers: base: swnode: remove need for a temporary string for the node nameColin Ian King
Currently the node name is being formatting into a temporary string node_name, however, kobject_init_and_add allows one to format up a node name, so use that instead. This removes the need for the node_name string and also cleans up the following warning: Fixes clang warning: warning: format string is not a string literal (potentially insecure) [-Wformat-security] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-10PM: Switch to use %ptRAndy Shevchenko
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>