summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2018-10-31mm/memory_hotplug: fix online/offline_pages called w.o. mem_hotplug_lockDavid Hildenbrand
There seem to be some problems as result of 30467e0b3be ("mm, hotplug: fix concurrent memory hot-add deadlock"), which tried to fix a possible lock inversion reported and discussed in [1] due to the two locks a) device_lock() b) mem_hotplug_lock While add_memory() first takes b), followed by a) during bus_probe_device(), onlining of memory from user space first took a), followed by b), exposing a possible deadlock. In [1], and it was decided to not make use of device_hotplug_lock, but rather to enforce a locking order. The problems I spotted related to this: 1. Memory block device attributes: While .state first calls mem_hotplug_begin() and the calls device_online() - which takes device_lock() - .online does no longer call mem_hotplug_begin(), so effectively calls online_pages() without mem_hotplug_lock. 2. device_online() should be called under device_hotplug_lock, however onlining memory during add_memory() does not take care of that. In addition, I think there is also something wrong about the locking in 3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages() without locks. This was introduced after 30467e0b3be. And skimming over the code, I assume it could need some more care in regards to locking (e.g. device_online() called without device_hotplug_lock. This will be addressed in the following patches. Now that we hold the device_hotplug_lock when - adding memory (e.g. via add_memory()/add_memory_resource()) - removing memory (e.g. via remove_memory()) - device_online()/device_offline() We can move mem_hotplug_lock usage back into online_pages()/offline_pages(). Why is mem_hotplug_lock still needed? Essentially to make get_online_mems()/put_online_mems() be very fast (relying on device_hotplug_lock would be very slow), and to serialize against addition of memory that does not create memory block devices (hmm). [1] http://driverdev.linuxdriverproject.org/pipermail/ driverdev-devel/ 2015-February/065324.html This patch is partly based on a patch by Vitaly Kuznetsov. Link: http://lkml.kernel.org/r/20180925091457.28651-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm/memory_hotplug: make add_memory() take the device_hotplug_lockDavid Hildenbrand
add_memory() currently does not take the device_hotplug_lock, however is aleady called under the lock from arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c to synchronize against CPU hot-remove and similar. In general, we should hold the device_hotplug_lock when adding memory to synchronize against online/offline request (e.g. from user space) - which already resulted in lock inversions due to device_lock() and mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory hot-add deadlock"). add_memory()/add_memory_resource() will create memory block devices, so this really feels like the right thing to do. Holding the device_hotplug_lock makes sure that a memory block device can really only be accessed (e.g. via .online/.state) from user space, once the memory has been fully added to the system. The lock is not held yet in drivers/xen/balloon.c arch/powerpc/platforms/powernv/memtrace.c drivers/s390/char/sclp_cmd.c drivers/hv/hv_balloon.c So, let's either use the locked variants or take the lock. Don't export add_memory_resource(), as it once was exported to be used by XEN, which is never built as a module. If somebody requires it, we also have to export a locked variant (as device_hotplug_lock is never exported). Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mathieu Malaterre <malat@debian.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26mm, proc: add KReclaimable to /proc/meminfoVlastimil Babka
The vmstat NR_KERNEL_MISC_RECLAIMABLE counter is for kernel non-slab allocations that can be reclaimed via shrinker. In /proc/meminfo, we can show the sum of all reclaimable kernel allocations (including slab) as "KReclaimable". Add the same counter also to per-node meminfo under /sys With this counter, users will have more complete information about kernel memory usage. Non-slab reclaimable pages (currently just the ION allocator) will not be missing from /proc/meminfo, making users wonder where part of their memory went. More precisely, they already appear in MemAvailable, but without the new counter, it's not obvious why the value in MemAvailable doesn't fully correspond with the sum of other counters participating in it. Link: http://lkml.kernel.org/r/20180731090649.16028-6-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'driver-core-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small number of driver core patches for 4.20-rc1. Not much happened here this merge window, only a very tiny number of patches that do: - add BUS_ATTR_WO() for use by drivers - component error path fixes - kernfs range check fix - other tiny error path fixes and const changes All of these have been in linux-next with no reported issues for a while" * tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: devres: provide devm_kstrdup_const() mm: move is_kernel_rodata() to asm-generic/sections.h devres: constify p in devm_kfree() driver core: add BUS_ATTR_WO() macro kernfs: Fix range checks in kernfs_get_target_path component: fix loop condition to call unbind() if bind() fails drivers/base/devtmpfs.c: don't pretend path is const in delete_path kernfs: update comment about kernfs_path() return value
2018-10-25Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt brigade came up with the following updates: - Driver for the Marvell System Error Interrupt machinery - Overhaul of the GIC-V3 ITS driver - Small updates and fixes all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) genirq: Fix race on spurious interrupt detection softirq: Fix typo in __do_softirq() comments genirq: Fix grammar s/an /a / irqchip/gic: Unify GIC priority definitions irqchip/gic-v3: Remove acknowledge loop dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller dt-bindings/interrupt-controller: Update Marvell ICU bindings irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI) arm64: marvell: Enable SEI driver irqchip/irq-mvebu-sei: Add new driver for Marvell SEI irqchip/irq-mvebu-icu: Support ICU subnodes irqchip/irq-mvebu-icu: Disociate ICU and NSR irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts irqchip/irq-mvebu-icu: Fix wrong private data retrieval dt-bindings/interrupt-controller: Fix Marvell ICU length in the example genirq/msi: Allow creation of a tree-based irqdomain for platform-msi dt-bindings: irqchip: renesas-irqc: Document r8a7744 support dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support irqchip/pdc: Setup all edge interrupts as rising edge at GIC irqchip/gic-v3-its: Allow use of LPI tables in reserved memory ...
2018-10-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes are: - Migrate CPU-intense 'misfit' tasks on asymmetric capacity systems, to better utilize (much) faster 'big core' CPUs. (Morten Rasmussen, Valentin Schneider) - Topology handling improvements, in particular when CPU capacity changes and related load-balancing fixes/improvements (Morten Rasmussen) - ... plus misc other improvements, fixes and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions sched/completions/Documentation: Clean up the document some more sched/completions/Documentation: Fix a couple of punctuation nits cpu/SMT: State SMT is disabled even with nosmt and without "=force" sched/core: Fix comment regarding nr_iowait_cpu() and get_iowait_load() sched/fair: Remove setting task's se->runnable_weight during PELT update sched/fair: Disable LB_BIAS by default sched/pelt: Fix warning and clean up IRQ PELT config sched/topology: Make local variables static sched/debug: Use symbolic names for task state constants sched/numa: Remove unused numa_stats::nr_running field sched/numa: Remove unused code from update_numa_stats() sched/debug: Explicitly cast sched_feat() to bool sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains sched/fair: Don't move tasks to lower capacity CPUs unless necessary sched/fair: Set rq->rd->overload when misfit sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE() sched/core: Change root_domain->overload type to int sched/fair: Change 'prefer_sibling' type to bool sched/fair: Kick nohz balance if rq->misfit_task_load ...
2018-10-23Merge tag 'acpi-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These fix ACPICA issues related to the handling of module-level AML, fix an ordering issue during ACPI initialization, update ACPICA to upstream revision 20181003 (including fixes mostly), fix issues with system-wide suspend/resume related to the ACPI driver for Intel SoCs (LPSS), fix device enumeration issues on boards with Dollar Cove or Whiskey Cove Intel PMICs, prevent ACPICA from calling ktime_get() in unsuitable conditions, update a few drivers and clean up some code in several places. Specifics: - Fix ACPICA issues related to the handling of module-level AML and make the ACPI initialization code parse ECDT before loading the definition block tables (Erik Schmauss). - Update ACPICA to upstream revision 20181003 including fixes related to the ill-defined "generic serial bus" and the handling of the _REG object (Bob Moore). - Fix some issues with system-wide suspend/resume on Intel BYT/CHT related to the handling of I2C controllers in the ACPI LPSS driver for Intel SoCs (Hans de Goede). - Modify the ACPI namespace scanning code to enumerate INT33FE HID devices as platform devices with I2C resources to avoid device enumeration problems on boards with Dollar Cove or Whiskey Cove Intel PMICs (Hans de Goede). - Prevent ACPICA from using ktime_get() during early resume from system-wide suspend before resuming the timekeeping which generally is unsafe and triggers a warning from the timekeeping code (Bart Van Assche). - Add low-level real time clock support to the ACPI Time and Aalarm Device (TAD) driver (Rafael Wysocki). - Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and Oopses when removing modules (Ronald Tschalär). - Fix the ACPI PPTT parsing code to handle architecturally unknown cache types properly (Jeffrey Hugo). - Fix initialization issue in the ACPI processor driver (Dou Liyang). - Clean up the code in several places (Andy Shevchenko, Bartlomiej Zolnierkiewicz, David Arcari, zhong jiang)" * tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (33 commits) ACPI / scan: Create platform device for INT33FE ACPI nodes ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer() ACPI: probe ECDT before loading AML tables regardless of module-level code flag ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes ACPICA: AML interpreter: add region addresses in global list during initialization ACPI: TAD: Add low-level support for real time capability ACPI: remove redundant 'default n' from Kconfig ACPI / SBS: Fix rare oops when removing modules ACPI / SBS: Fix GPE storm on recent MacBookPro's ACPI/PPTT: Handle architecturally unknown cache types drivers: base: cacheinfo: Do not populate sysfs for unknown cache types ACPICA: Update version to 20181003 ACPICA: Never run _REG on system_memory and system_IO ACPICA: Split large interpreter file ACPICA: Update for field unit access ACPICA: Rename some of the Field Attribute defines ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol ACPI / processor: Fix the return value of acpi_processor_ids_walk() ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq ...
2018-10-23Merge tag 'pm-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These make hibernation on 32-bit x86 systems work in all of the cases in which it works on 64-bit x86 ones, update the menu cpuidle governor and the "polling" state to make them more efficient, add more hardware support to cpufreq drivers and fix issues with some of them, fix a bug in the conservative cpufreq governor, fix the operating performance points (OPP) framework and make it more stable, update the devfreq subsystem to take changes in the APIs used by into account and clean up some things all over. Specifics: - Backport hibernation bug fixes from x86-64 to x86-32 and consolidate hibernation handling on x86 to allow 32-bit systems to work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen Yu). - Fix hibernation documentation (Vladimir D. Seleznev). - Update the menu cpuidle governor to fix a couple of issues with it, make it more efficient in some cases and clean it up (Rafael Wysocki). - Rework the cpuidle polling state implementation to make it more efficient (Rafael Wysocki). - Clean up the cpuidle core somewhat (Fieah Lim). - Fix the cpufreq conservative governor to take policy limits into account properly in some cases (Rafael Wysocki). - Add support for retrieving guaranteed performance information to the ACPI CPPC library and make the intel_pstate driver use it to expose the CPU base frequency via sysfs on systems with the hardware-managed P-states (HWP) feature enabled (Srinivas Pandruvada). - Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor). - Get rid of device_node.name printing from cpufreq (Rob Herring). - Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa). - Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju Das). - Update the dt-platdev cpufreq driver to allow RK3399 to have separate tunables per cluster (Dmitry Torokhov). - Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver (Christoph Hellwig). - Make the imx6q cpufreq driver read OCOTP through nvmem for imx6ul/imx6ull (Anson Huang). - Fix several bugs in the operating performance points (OPP) framework and make it more stable (Viresh Kumar, Dave Gerlach). - Update the devfreq subsystem to take changes in the APIs used by into account, fix some issues with it and make it stop print device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra, Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang). - Prepare the generic power domains (genpd) framework for dealing with domains containing CPUs (Ulf Hansson). - Prevent sysfs attributes representing low-power S0 residency counters from being exposed if low-power S0 support is not indicated in ACPI FADT (Rajneesh Bhardwaj). - Get rid of custom CPU features macros for Intel CPUs from the intel_idle and RAPL drivers (Andy Shevchenko). - Update the tasks freezer to list tasks that refused to freeze and caused a system transition to a sleep state to be aborted (Todd Brandt). - Update the pm-graph set of tools to v5.2 (Todd Brandt). - Fix some issues in the cpupower utility (Anders Roxell, Prarit Bhargava)" * tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits) PM / Domains: Document flags for genpd PM / Domains: Deal with multiple states but no governor in genpd PM / Domains: Don't treat zero found compatible idle states as an error cpuidle: menu: Avoid computations when result will be discarded cpuidle: menu: Drop redundant comparison cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent() cpufreq: conservative: Take limits changes into account properly Documentation: intel_pstate: Add base_frequency information cpufreq: intel_pstate: Add base_frequency attribute ACPI / CPPC: Add support for guaranteed performance cpuidle: menu: Simplify checks related to the polling state PM / tools: sleepgraph and bootgraph: upgrade to v5.2 PM / tools: sleepgraph: first batch of v5.2 changes cpupower: Fix coredump on VMWare cpupower: Fix AMD Family 0x17 msr_pstate size cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster cpuidle: poll_state: Revise loop termination condition cpuidle: menu: Move the latency_req == 0 special case check cpuidle: menu: Avoid computations for very close timers ...
2018-10-23Merge tag 'regmap-v5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A small update with a couple of new APIs that are useful for some small sets of devices: - Split up the single_rw flagging to map read and write separately as some devices support bulk operations for only read or only write. - Add a write version of the noinc API. - Clean up the code for LOG_DEVICE a bit" * tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: use less #ifdef for LOG_DEVICE regmap: Add regmap_noinc_write API regmap: split up regmap_config.use_single_rw regmap: fix comment for regmap.use_single_write
2018-10-22Merge tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "First batch of dma-mapping changes for 4.20. There will be a second PR as some big changes were only applied just before the end of the merge window, and I want to give them a few more days in linux-next. Summary: - mostly more consolidation of the direct mapping code, including converting over hexagon, and merging the coherent and non-coherent code into a single dma_map_ops instance (me) - cleanups for the dma_configure/dma_unconfigure callchains (me) - better handling of dma_masks in odd setups (me, Alexander Duyck) - better debugging of passing vmalloc address to the DMA API (Stephen Boyd) - CMA command line parsing fix (He Zhe)" * tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping: (27 commits) dma-direct: respect DMA_ATTR_NO_WARN dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN dma-direct: document the zone selection logic dma-debug: Check for drivers mapping invalid addresses in dma_map_single() dma-direct: fix return value of dma_direct_supported dma-mapping: move dma_default_get_required_mask under ifdef dma-direct: always allow dma mask <= physiscal memory size dma-direct: implement complete bus_dma_mask handling dma-direct: refine dma_direct_alloc zone selection dma-direct: add an explicit dma_direct_get_required_mask dma-mapping: make the get_required_mask method available unconditionally unicore32: remove swiotlb support Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops" dma-mapping: support non-coherent devices in dma_common_get_sgtable dma-mapping: consolidate the dma mmap implementations dma-mapping: merge direct and noncoherent ops dma-mapping: move the dma_coherent flag to struct device MIPS: don't select DMA_MAYBE_COHERENT from DMA_PERDEV_COHERENT dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration dma-mapping: fix panic caused by passing empty cma command line argument ...
2018-10-21Merge remote-tracking branches 'regmap/topic/noinc' and ↵Mark Brown
'regmap/topic/single-rw' into regmap-next
2018-10-21Merge branch 'regmap-4.20' into regmap-nextMark Brown
2018-10-19regmap: use less #ifdef for LOG_DEVICEBen Dooks
Move the checking of the LOG_DEVICE into a function to reduce the number of #ifdefs and ensure more of the code gets compiled/checked, and make it easier to change this for internal debugging purposes (such as checking >1 device). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-19regmap: Add regmap_noinc_write APIBen Whitten
The regmap API had a noinc_read function added for instances where devices supported returning data from an internal FIFO in a single read. This commit adds the noinc_write variant to allow writing to a non incrementing register, this is used in devices such as the sx1301 for loading firmware. Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-18Merge branches 'acpi-init', 'acpi-osl', 'acpi-bus', 'acpi-tables' and ↵Rafael J. Wysocki
'acpi-misc' * acpi-init: ACPI: probe ECDT before loading AML tables regardless of module-level code flag * acpi-osl: ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer() * acpi-bus: ACPI / glue: Split dev_is_platform() out of module for wide use * acpi-tables: ACPI/PPTT: Handle architecturally unknown cache types drivers: base: cacheinfo: Do not populate sysfs for unknown cache types * acpi-misc: ACPI: remove redundant 'default n' from Kconfig ACPI: custom_method: remove meaningless null check before debugfs_remove()
2018-10-18PM / Domains: Deal with multiple states but no governor in genpdUlf Hansson
A caller of pm_genpd_init() that provides some states for the genpd via the ->states pointer in the struct generic_pm_domain, should also provide a governor. This because it's the job of the governor to pick a state that satisfies the constraints. Therefore, let's print a warning to inform the user about such bogus configuration and avoid to bail out, by instead picking the shallowest state before genpd invokes the ->power_off() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18PM / Domains: Don't treat zero found compatible idle states as an errorUlf Hansson
Instead of returning -EINVAL from of_genpd_parse_idle_states() in case none compatible states was found, let's return 0 to indicate success. Assign also the out-parameter *states to NULL and *n to 0, to indicate to the caller that zero states have been found/allocated. This enables the caller of of_genpd_parse_idle_states() to easier act on the returned error code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-16devres: provide devm_kstrdup_const()Bartosz Golaszewski
Provide a resource managed version of kstrdup_const(). This variant internally calls devm_kstrdup() on pointers that are outside of .rodata section and returns the string as is otherwise. Make devm_kfree() check if the passed pointer doesn't point to .rodata and if so - don't actually destroy the resource. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16devres: constify p in devm_kfree()Bartosz Golaszewski
Make devm_kfree() signature uniform with that of kfree(). To avoid compiler warnings: cast p to (void *) when calling devres_destroy(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-07Merge tag 'char-misc-4.19-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc I wrote: "Char/Misc fixes for 4.19-rc7 Here are 8 small fixes for some char/misc driver issues Included here are: - fpga driver fixes - thunderbolt bugfixes - firmware core revert/fix - hv core fix - hv tool fix All of these have been in linux-next with no reported issues." * tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Initialize after IOMMUs thunderbolt: Do not handle ICM events after domain is stopped firmware: Always initialize the fw_priv list object docs: fpga: document fpga manager flags fpga: bridge: fix obvious function documentation error tools: hv: fcopy: set 'error' in case an unknown operation was requested fpga: do not access region struct after fpga_region_unregister Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
2018-10-06Merge tag 'irqchip-4.20' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - kexec/kdump support for EFI-based GICv3 platforms - Marvell SEI support - QC PDC fixes - GIC cleanups and optimizations - DT updates [ tglx: Dropped the madera driver as it breaks the build ]
2018-10-04drivers: base: cacheinfo: Do not populate sysfs for unknown cache typesJeffrey Hugo
If a cache has an unknown type because neither the hardware nor the firmware told us, an entry in the sysfs tree will be made, but the type file will not be present. lscpu depends on the type file being present for every entry, and will error out without printing system information if lscpu cannot open the type file. Presenting information about a cache without indicating its type is not useful, therefore if we hit a cache with an unknown type, stop populating sysfs so that userspace has the maximum amount of useful information. This addresses the following lscpu error, which prevents any output. lscpu: cannot open /sys/devices/system/cpu/cpu0/cache/index3/type: No such file or directory Suggested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04PM / core: Clear the direct_complete flag on errorsRafael J. Wysocki
If __device_suspend() runs asynchronously (in which case the device passed to it is in dpm_suspended_list at that point) and it returns early on an error or pending wakeup, and the power.direct_complete flag has been set for the device already, the subsequent device_resume() will be confused by that and it will call pm_runtime_enable() incorrectly, as runtime PM has not been disabled for the device by __device_suspend(). To avoid that, clear power.direct_complete if __device_suspend() is not going to disable runtime PM for the device before returning. Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily) Reported-by: Al Cooper <alcooperx@gmail.com> Tested-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02dma-mapping: move dma_default_get_required_mask under ifdefChristoph Hellwig
This avoids a warning on powerpc. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2018-10-02genirq/msi: Allow creation of a tree-based irqdomain for platform-msiMarc Zyngier
platform_msi_create_device_domain() always creates a revmap-based irqdomain, which has the drawback of requiring the number of MSIs that can be allocated ahead of time. This is not always possible, and we sometimes need to use a tree-based irqdomain instead. Add a new platform_msi_create_device_tree_domain() helper to that effect. Reported-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-02Merge branch 'sched/urgent' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-01dma-mapping: make the get_required_mask method available unconditionallyChristoph Hellwig
This save some duplication for ia64, and makes the interface more general. In the long run we want each dma_map_ops instance to fill this out, but this will take a little more prep work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-09-30firmware: Always initialize the fw_priv list objectBjorn Andersson
When freeing the fw_priv the item is taken off the list. This causes an oops in the FW_OPT_NOCACHE case as the list object is not initialized. Make sure to initialize the list object regardless of this flag. Fixes: 422b3db2a503 ("firmware: Fix security issue with request_firmware_into_buf()") Cc: stable@vger.kernel.org Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16component: fix loop condition to call unbind() if bind() failsBanajit Goswami
During component_bind_all(), if bind() fails for any particular component associated with a master, unbind() should be called for all previous components in that master's match array, whose bind() might have completed successfully. As per the current logic, if bind() fails for the component at position 'n' in the master's match array, it would start calling unbind() from component in 'n'th position itself and work backwards, and will always skip calling unbind() for component in 0th position in the master's match array. Fix this by updating the loop condition, and the logic to refer to the components in master's match array, so that unbind() is called for all components starting from 'n-1'st position in the array, until (and including) component in 0th position. Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16drivers/base/devtmpfs.c: don't pretend path is const in delete_pathRasmus Villemoes
path is the result of kstrdup, and we repeatedly call strrchr on it, modifying it through the returned pointer. So there's no reason to pretend path is const. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12firmware: Fix security issue with request_firmware_into_buf()Rishabh Bhatnagar
When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag it is expected that firmware is loaded into buffer from memory. But inside alloc_lookup_fw_priv every new firmware that is loaded is added to the firmware cache (fwc) list head. So if any driver requests a firmware that is already loaded the code iterates over the above mentioned list and it can end up giving a pointer to other device driver's firmware buffer. Also the existing copy may either be modified by drivers, remote processors or even freed. This causes a potential security issue with batched requests when using request_firmware_into_buf. Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE is set, and also don't do the lookup in the list. Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional") [mcgrof: broken since feature introduction on v4.8] Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10sched/topology, drivers/base/arch_topology: Rebuild the sched_domain ↵Morten Rasmussen
hierarchy when capacities change The setting of SD_ASYM_CPUCAPACITY depends on the per-CPU capacities. These might not have their final values when the hierarchy is initially built as the values depend on cpufreq to be initialized or the values being set through sysfs. To ensure that the flags are set correctly we need to rebuild the sched_domain hierarchy whenever the reported per-CPU capacity (arch_scale_cpu_capacity()) changes. This patch ensure that a full sched_domain rebuild happens when CPU capacity changes occur. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1532093554-30504-3-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-08dma-mapping: remove dma_deconfigureChristoph Hellwig
This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-08dma-mapping: remove dma_configureChristoph Hellwig
There is no good reason for this indirection given that the method always exists. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-07regmap: split up regmap_config.use_single_rwDavid Frey
Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-07regmap: fix comment for regmap.use_single_writeDavid Frey
Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04memory_hotplug: fix kernel_panic on offline page processingMikhail Zaslonko
Within show_valid_zones() the function test_pages_in_a_zone() should be called for online memory blocks only. Otherwise it might lead to the VM_BUG_ON due to uninitialized struct pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set): page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ Call Trace: ([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168) [<0000000000923472>] show_valid_zones+0x5a/0x1a8 [<0000000000900284>] dev_attr_show+0x3c/0x78 [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150 [<00000000003ef662>] seq_read+0x212/0x4b8 [<00000000003bf202>] __vfs_read+0x3a/0x178 [<00000000003bf3ca>] vfs_read+0x8a/0x148 [<00000000003bfa3a>] ksys_read+0x62/0xb8 [<0000000000bc2220>] system_call+0xdc/0x2d8 That VM_BUG_ON was triggered by the page poisoning introduced in mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"). With the same commit the new 'nid' field has been added to the struct memory_block in order to store and later on derive the node id for offline pages (instead of accessing struct page which might be uninitialized). But one reference to nid in show_valid_zones() function has been overlooked. Fixed with current commit. Also, nr_pages will not be used any more after test_pages_in_a_zone() call, do not update it. Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-24PM / clk: signedness bug in of_pm_clk_add_clks()Dan Carpenter
"count" needs to be signed for the error handling to work. I made "i" signed as well so they match. Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree) Cc: 4.6+ <stable@vger.kernel.org> # 4.6+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-18Merge tag 'driver-core-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are all of the driver core and related patches for 4.19-rc1. Nothing huge here, just a number of small cleanups and the ability to now stop the deferred probing after init happens. All of these have been in linux-next for a while with only a merge issue reported" * tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) base: core: Remove WARN_ON from link dependencies check drivers/base: stop new probing during shutdown drivers: core: Remove glue dirs from sysfs earlier driver core: remove unnecessary function extern declare sysfs.h: fix non-kernel-doc comment PM / Domains: Stop deferring probe at the end of initcall iommu: Remove IOMMU_OF_DECLARE iommu: Stop deferring probe at end of initcalls pinctrl: Support stopping deferred probe after initcalls dt-bindings: pinctrl: add a 'pinctrl-use-default' property driver core: allow stopping deferred probe after init driver core: add a debugfs entry to show deferred devices sysfs: Fix internal_create_group() for named group updates base: fix order of OF initialization linux/device.h: fix kernel-doc notation warning Documentation: update firmware loader fallback reference kobject: Replace strncpy with memcpy drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number kernfs: Replace strncpy with memcpy device: Add #define dev_fmt similar to #define pr_fmt ...
2018-08-17mm: provide a fallback for PAGE_KERNEL_RO for architecturesLuis R. Rodriguez
Some architectures do not define certain PAGE_KERNEL_* flags, this is either because: a) The way to implement some of these flags is *not yet ported*, or b) The architecture *has no way* to describe them Over time we have accumulated a few PAGE_KERNEL_* fallback workarounds for architectures in the kernel which do not define them using *relatively safe* equivalents. Move these scattered fallback hacks into asm-generic. We start off with PAGE_KERNEL_RO using PAGE_KERNEL as a fallback. This has been in place on the firmware loader for years. Move the fallback into the respective asm-generic header. Link: http://lkml.kernel.org/r/20180510185507.2439-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/memory_hotplug.c: drop unnecessary checks from register_mem_sect_under_node()Oscar Salvador
Callers of register_mem_sect_under_node() are always passing a valid memory_block (not NULL), so we can safely drop the check for NULL. In the same way, register_mem_sect_under_node() is only called in case the node is online, so we can safely remove that check as well. Link: http://lkml.kernel.org/r/20180622111839.10071-5-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of ↵Oscar Salvador
walk_memory_range() link_mem_sections() and walk_memory_range() share most of the code, so we can use convert link_mem_sections() into a dummy function that calls walk_memory_range() with a callback to register_mem_sect_under_node(). This patch converts register_mem_sect_under_node() in order to match a walk_memory_range's callback, getting rid of the check_nid argument and checking instead if the system is still boothing, since we only have to check for the nid if the system is in such state. Link: http://lkml.kernel.org/r/20180622111839.10071-4-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Suggested-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/memory_hotplug.c: call register_mem_sect_under_node()Oscar Salvador
When hotplugging memory, it is possible that two calls are being made to register_mem_sect_under_node(). One comes from __add_section()->hotplug_memory_register() and the other from add_memory_resource()->link_mem_sections() if we had to register a new node. In case we had to register a new node, hotplug_memory_register() will only handle/allocate the memory_block's since register_mem_sect_under_node() will return right away because the node it is not online yet. I think it is better if we leave hotplug_memory_register() to handle/allocate only memory_block's and make link_mem_sections() to call register_mem_sect_under_node(). So this patch removes the call to register_mem_sect_under_node() from hotplug_memory_register(), and moves the call to link_mem_sections() out of the condition, so it will always be called. In this way we only have one place where the memory sections are registered. Link: http://lkml.kernel.org/r/20180622111839.10071-3-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-08-15Merge branch 'next-general' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: - kstrdup() return value fix from Eric Biggers - Add new security_load_data hook to differentiate security checking of kernel-loaded binaries in the case of there being no associated file descriptor, from Mimi Zohar. - Add ability to IMA to specify a policy at build-time, rather than just via command line params or by loading a custom policy, from Mimi. - Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if using signed firmware), from Mimi. - Allow IMA to deny loading of kexec kernel images, as they cannot be measured by IMA, from Mimi. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: check for kstrdup() failure in lsm_append() security: export security_kernel_load_data function ima: based on policy warn about loading firmware (pre-allocated buffer) module: replace the existing LSM hook in init_module ima: add build time policy ima: based on policy require signed firmware (sysfs fallback) firmware: add call to LSM hook before firmware sysfs fallback ima: based on policy require signed kexec kernel images kexec: add call to LSM hook in original kexec_load syscall security: define new LSM hook named security_kernel_load_data MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
2018-08-14Merge tag 'pm-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
2018-08-14Merge tag 'regulator-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The biggest set of changes in here is the addition of the Qualcomm RPMH driver. As well as the regualtor driver itself being quite large due to the usual involved Qualcomm regulator stuff there's also some code shared with the arm-soc tree, a bus driver required to communicate with the hardware that actually winds up being much larger than the regulator driver itself and a LLCC driver that was part of the same signed tag used with the arm-soc tree. Other than that it's a fairly standard and quiet release, highlights include: - Addition of device links from regulator consumers to their regulators, helping the core avoid dependency issues during suspend. - Support for the entertainingly innovative suspend implementation in the BD9571MWV. - Support for switch regulators on the PFUZE100, this required two goes due to backwards compatibility issues with old DTs that were discovered. - Support for Freescale PFUZE3001 and SocioNext UniPhier. - The aforementioned Qualcomm RPMH driver together with the driver changes required to support it" * tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: add QCOM RPMh regulator driver regulator: dt-bindings: add QCOM RPMh regulator bindings regulator: samsung: Add SPDX license identifiers regulator: maxim: Add SPDX license identifiers regulator: bd71837: adobt MFD changes to regulator driver regulator: tps65217: Fix NULL pointer dereference on probe regulator: Add support for CPCAP regulators on Motorola Xoom devices. regulator: Add sw2_sw4 voltage table to cpcap regulator. regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static regulator: pfuze100: add support to en-/disable switch regulators regulator: pfuze100: add optional disable switch-regulators binding soc: qcom: rmtfs-mem: fix memleak in probe error paths soc: qcom: llc-slice: Add missing MODULE_LICENSE() drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type() drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs firmware: qcom: scm: add a dummy qcom_scm_assign_mem() drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children drivers: qcom: rpmh-rsc: allow active requests from wake TCS drivers: qcom: rpmh: add support for batch RPMH request drivers: qcom: rpmh: allow requests to be sent asynchronously ...
2018-08-14Merge tag 'regmap-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Several small new features for regmap this time around: - Support for SCCB, an I2C variant used on some media cards. This has also pulled in an I2C commit from Peter Rosin as a dependency. - Addition of an API for reading repeatedly from registers where the address doesn't automatically increment like some ADC outputs or GPIO status registers. - Support for bulk I/O on Slimbus" * tag 'regmap-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Add regmap_noinc_read API regmap: sccb: fix typo and sort headers alphabetically i2c: smbus: add unlocked __i2c_smbus_xfer variant regmap: add SCCB support regmap: slimbus: add support to multi read/write
2018-08-14Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'Rafael J. Wysocki
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure