summaryrefslogtreecommitdiff
path: root/drivers/bcma
AgeCommit message (Collapse)Author
2020-08-02bcma: gpio: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add(). The irqchip is instead added while adding the gpiochip. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722111725.210923-1-linus.walleij@linaro.org
2020-08-02drivers: bcma: remove set but not used variable `addrh` and `sizeh`Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function 'bcma_erom_get_addr_desc': drivers/bcma/scan.c:219 warning: variable `addrh` and `sizeh` set but not used [-Wunused-but-set-variable] Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721083935.13306-1-zhengyongjun3@huawei.com
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-18bcma: remove set but not used variable 'sizel'yu kuai
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function ‘bcma_erom_get_addr_desc’: drivers/bcma/scan.c:222:20: warning: variable ‘sizel’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Fixes: 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24bcma: fix block comment styleYadav Lamichhane
Fix a coding style issue. Signed-off-by: Yadav Lamichhane <tuxomega1@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13bcma: make arrays pwr_info_offset and sprom_sizes static const, shrinks ↵Colin Ian King
object size Arrays pwr_info_offset and sprom_sizes can be make static const rather than populating them on the stack. Shrinks object size by 236 bytes. Before: text data bss dec hex filename 11300 1320 64 12684 318c drivers/bcma/sprom.o After: text data bss dec hex filename 10904 1480 64 12448 30a0 drivers/bcma/sprom.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATAColin Ian King
An earlier commit re-worked the setting of the bitmask and is now assigning v with some bit flags rather than bitwise or-ing them into v, consequently the earlier bit-settings of v are being lost. Fix this by replacing an assignment with the bitwise or instead. Addresses-Coverity: ("Unused value") Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03bcma: remove two unused variablesYueHaibing
drivers/bcma/driver_mips.c:70:18: warning: ipsflag_irq_shift defined but not used [-Wunused-const-variable=] drivers/bcma/driver_mips.c:62:18: warning: ipsflag_irq_mask defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06bcma: Use dev_get_drvdataChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10bcma: use dev_* printing functionsRafał Miłecki
It provides more meaningful messages. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10bcma: keep a direct pointer to the struct deviceRafał Miłecki
Accessing struct device is pretty useful/common so having a direct pointer: 1) Simplifies some code 2) Makes bcma_bus_get_host_dev() unneeded 3) Allows further improvements like using dev_* printing helpers Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-18bcma: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon
This allows us to increase compile-test coverage without having to build a kernel for MIPS. That's particularly interesting for subsystem maintainers that want to test as many drivers as possible in a single build. We also add a dependency on HAS_IOMEM in BCMA_HOST_SOC to make sure the driver is not selected when the arch does not implement IO accessors. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-12bcma: fix buffer size caused crash in bcma_core_mips_print_irq()Rafał Miłecki
Used buffer wasn't big enough to hold whole strings. Example output of this function is: [ 0.180892] bcma: bus0: core 0x0800, irq: 2(S)* 3 4 5 6 D I [ 0.180948] bcma: bus0: core 0x0812, irq: 2(S) 3* 4 5 6 D I [ 0.180998] bcma: bus0: core 0x082d, irq: 2(S) 3 4* 5 6 D I [ 0.181046] bcma: bus0: core 0x082c, irq: 2(S) 3 4 5 6 D I* which means we need to store up to 24 chars. Fixes: 758f7e06063a8 ("bcma: Use bcma_debug and not pr_cont in MIPS driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-03drivers: remove force dma flag from busesChristoph Hellwig
With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-13bcma: Prevent build of PCI host features in moduleMatt Redfearn
Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in a build error due to use of symbols not exported from vmlinux: ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined! ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 To prevent this, don't allow the host mode feature to be built if CONFIG_BCMA=m Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28bcma: add HP Stream NotebookDenis 'GNUtoo' Carikli
In this laptop we have the following PCI device: 02:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a] [...] Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=32K] [...] With this patch, we can now see its WiFi chip: bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0) bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0) bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0) bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0) bcma: bus0: Found rev 15 PMU (capabilities 0x518C5E0F) bcma: bus0: SPROM offset 0x840 bcma: bus0: Found SPROM revision 10 bcma: bus0: Workarounds unknown or not needed for device 0xA886 bcma: bus0: Bus registered But it not yet supported by brcmsmac so it won't work for now: brcmsmac bcma0:1: brcms_b_attach wl0: vendor 0x14e4 device 0x4365 brcmsmac: unknown device id 4365 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27bcma: Replace mdelay with usleep_range in bcma_pmu_resources_initJia-Ju Bai
After checking all possible call chains to bcma_pmu_resources_init() here, my tool finds that this function is never called in atomic context, namely never in an interrupt handler or holding a spinlock. Thus mdelay can be replaced with usleep_range to avoid busy wait. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16bcma: Fix 'allmodconfig' and BCMA builds on MIPS targetsGuenter Roeck
Mips builds with BCMA host mode enabled fail in mainline and -next with: In file included from include/linux/bcma/bcma.h:10:0, from drivers/bcma/bcma_private.h:9, from drivers/bcma/main.c:8: include/linux/bcma/bcma_driver_pci.h:218:24: error: field 'pci_controller' has incomplete type Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as generic") as the culprit. Analysis shows that the commmit changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only defined if PCI_DRIVERS_LEGACY is enabled. Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on PCI_DRIVERS_LEGACY. Add the missing dependency. Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07bcma: Adjust block commentAshish Kalra
use * for block comments in multiple lines according to kernel coding style Reported by: checkpatch.pl Signed-off-by: Ashish Kalra <eashishkalra@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-04Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27bcma: Use bcma_debug and not pr_cont in MIPS driverJoe Perches
Commit 66cc04424960 ("bcma: use bcma_debug and pr_cont in MIPS driver") converted a printk(KERN_DEBUG to bcma_debug. bcma_debug is guarded by a #define DEBUG via pr_debug. This means that the bcma_debug will generally not be emitted but any pr_cont following the bcma_debug will be emitted. Correct this by removing the uses of pr_cont by using a temporary. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-17bcma: use bcma_debug and pr_cont in MIPS driverRafał Miłecki
Using bcma_debug gives a device-specific prefix for messages and pr_cont is a common helper for continuing a line. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-By: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13bcma: keep *config menu togetherRandy Dunlap
Use "if BCMA"/"endif" around all Kconfig symbols so that they are kept together in *config menus instead of showing up in unexpected places. Also remove "depends on BCMA" since this is handled by the "if BCMA" addition. Tested with ARCH={x86_64,MIPS} using make {n,menu,g,x}config. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08bcma: make BCMA a menuconfig to ease disabling it allVincent Legoll
No need to get into the submenu to disable all BCMA-related config entries. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27bcma: gpio: Correct number of GPIOs for BCM53573Florian Fainelli
Broadcom BCM53573 SoCs actually have 32 GPIOs, and not 16. Fixes: 3f37ec79dd21 ("bcma: support BCM53573 series of wireless SoCs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20bcma: fill core OF info independently of bus typeRafał Miłecki
PCI devices can be described in DT as well so we should always execute relevant code. This will make bcma e.g. set of_node for cores described in DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20bcma: use helper function to set core dev's parentRafał Miłecki
A tiny code deduplication thanks to the bcma_bus_get_host_dev. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20bcma: drop unneeded check for CONFIG_OF_IRQRafał Miłecki
We already have the same check in bcma_of_get_irq which really calls symbols available with CONFIG_OF_IRQ only. It appears this duplicated check was accidentally added in commit c58d900cc96a ("bcma: fix building without OF_IRQ"). The rest of code in bcma_of_fill_device should work fine without CONFIG_OF_IRQ. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-08bcma: gpio: set of_node regardless of the host typeRafał Miłecki
DT allows describing many device types, not only platform ones. If e.g. bcma is hosted on PCI(e) and it has its of_node, let's pass it to the GPIO subsystem. This allows GPIO code to handle more hardware details not only for bcma on a SoC. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31bcma: make OF code more generic (not platform_device specific)Rafał Miłecki
OF allows not only specifying platform devices but also describing devices on standard buses like PCI or USB. This change will allow reading info from DT for bcma buses hosted on PCI cards. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31bcma: use (get|put)_device when probing/removing device driverRafał Miłecki
This allows tracking device state and e.g. makes devm work as expected. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17Revert "bcma: init serial console directly from ChipCommon code"Rafał Miłecki
This reverts commit 4c81acab3816 ("bcma: init serial console directly from ChipCommon code") as it broke IRQ assignment. Getting IRQ with bcma_core_irq helper on SoC requires MIPS core to be set. It happens *after* ChipCommon initialization so we can't do this so early. This fixes a user reported regression. It wasn't critical as serial was still somehow working but lack of IRQs was making in unreliable. Fixes: 4c81acab3816 ("bcma: init serial console directly from ChipCommon code") Reported-by: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29bcma: add Dell Inspiron 3148Jiri Slaby
This is what is in the laptop: 01:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Device [1028:0018] Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at b0400000 (64-bit, non-prefetchable) [size=32K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-9a-ff-ff-f3-40-b8 Capabilities: [16c] Power Budgeting <?> With the patch, I can see: bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0) bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0) bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0) bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0) bcma: bus0: Bus registered The wifi is not currently supported by brcmsmac yet: brcmsmac bcma1:1: mfg 4bf core 812 rev 33 class 0 irq 18 brcmsmac: unknown device id 4365 So don't expect a working wifi from this patch :). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: <linux-wireless@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09bcma: use of_dma_configure() to set initial dma maskArnd Bergmann
While fixing another bug, I noticed that bcma manually sets up a dma_mask pointer for its child devices. We have a generic helper for that now, which should be able to cope better with any variations that might be needed to deal with cache coherency, unusual DMA address offsets, iommus, or limited DMA masks, none of which are currently handled here. This changes the core to use the of_dma_configure(), like we do for platform devices that are probed directly from DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03bcma: support BCM53573 series of wireless SoCsRafał Miłecki
BCM53573 seems to be the first series of Northstar family with wireless on the chip. The base models are BCM53573-s (A0, A1) and there is also BCM47189B0 which seems to be some small modification. The only problem with these chipsets seems to be watchdog. It's totally unavailable on 53573A0 / 53573A1 and preferable PMU watchdog is broken on 53573B0 / 53573B1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-25Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2016-07-22 I'm sick so I have to keep this short, but here's the last pull request to net-next. This time there's a trivial conflict with mtd tree: http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au We concluded with Brian (CCed) that it's best that we ask Linus to fix this. The patches have been in linux-next for a couple of days. This time I haven't done any merge tests so I don't know if there are any other conflicts etc. Please let me know if there are any problems. wireless-drivers-next patches for 4.8 Major changes: wl18xx * add initial mesh support bcma * serial flash support on non-MIPS SoCs ath10k * enable support for QCA9888 * disable wake_tx_queue() mac80211 op for older devices to workaround throughput regression ath9k * implement temperature compensation support for AR9003+ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bcma: define ChipCommon B MII registersRafał Miłecki
We don't have access to datasheets to document all the bits but we can name these registers at least. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18bcma: allow enabling serial flash support on non-MIPS SoCsRafał Miłecki
So far we had only MIPS devices with serial flash connected to the SoC's ChipCommon. ARM devices got a separated SPI controller and weere using standard SPI drivers. This has changed with the wireless SoC BCM47189B0. It's ARM based but has serial flash attached just like older devices. This allows using existing driver with these devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18bcma: add PCI ID for Foxconn's BCM43142 deviceRafał Miłecki
After discovering there are 2 very different 14e4:4365 PCI devices we made ID tables less generic. Back then we believed there are only 2 such devices: 1) 14e4:4365 1028:0016 with SoftMAC BCM43142 chipset 2) 14e4:4365 14e4:4365 with FullMAC BCM4366 chipset >From the recent report it appears there is also 14e4:4365 105b:e092 which should be claimed by bcma. Add back support for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=121881 Fixes: 515b399c9a20 ("bcma: claim only 14e4:4365 PCI Dell card with SoftMAC BCM43142") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> [4.6+] Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-10x86/quirks: Add early quirk to reset Apple AirPort cardLukas Wunner
The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...