summaryrefslogtreecommitdiff
path: root/drivers/block/floppy.c
AgeCommit message (Collapse)Author
2021-11-04floppy: address add_disk() error handling on probeLuis Chamberlain
We need to cleanup resources on the probe() callback registered with __register_blkdev(), now that add_disk() error handling is supported. Address this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-14-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18floppy: add error handling support for add_disk()Luis Chamberlain
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-6-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18floppy: fix calling platform_device_unregister() on invalid drivesLuis Chamberlain
platform_device_unregister() should only be called when a respective platform_device_register() is called. However the floppy driver currently allows failures when registring a drive and a bail out could easily cause an invalid call to platform_device_unregister() where it was not intended. Fix this by adding a bool to keep track of when the platform device was registered for a drive. This does not fix any known panic / bug. This issue was found through code inspection while preparing the driver to use the up and coming support for device_add_disk() error handling. From what I can tell from code inspection, chances of this ever happening should be insanely small, perhaps OOM. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-5-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18floppy: use blk_cleanup_disk()Luis Chamberlain
Use the blk_cleanup_queue() followed by put_disk() can be replaced with blk_cleanup_disk(). No need for two separate loops. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-4-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18floppy: fix add_disk() assumption on exit due to new developmentsLuis Chamberlain
After the patch titled "floppy: use blk_mq_alloc_disk and blk_cleanup_disk" the floppy driver was modified to allocate the blk_mq_alloc_disk() which allocates the disk with the queue. This is further clarified later with the patch titled "block: remove alloc_disk and alloc_disk_node". This clarifies that: Most drivers should use and have been converted to use blk_alloc_disk and blk_mq_alloc_disk. Only the scsi ULPs and dasd still allocate a disk separately from the request_queue so don't bother with convenience macros for something that should not see significant new users and remove these wrappers. And then we have the patch titled, "block: hold a request_queue reference for the lifetime of struct gendisk" which ensures that a queue is *always* present for sure during the entire lifetime of a disk. In the floppy driver's case then the disk always comes with the queue. So even if even if the queue was cleaned up on exit, putting the disk *is* still required, and likewise, blk_cleanup_queue() on a null queue should not happen now as disk->queue is valid from disk allocation time on. Automatic backport code scrapers should hopefully not cherry pick this patch as a stable fix candidate without full due dilligence to ensure all the work done on the block layer to make this happen is merged first. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-3-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: drop unused includes in <linux/genhd.h>Christoph Hellwig
Drop various include not actually used in genhd.h itself, and move the remaning includes closer together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-28Revert "floppy: reintroduce O_NDELAY fix"Denis Efremov
The patch breaks userspace implementations (e.g. fdutils) and introduces regressions in behaviour. Previously, it was possible to O_NDELAY open a floppy device with no media inserted or with write protected media without an error. Some userspace tools use this particular behavior for probing. It's not the first time when we revert this patch. Previous revert is in commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling"). This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8. Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/ Reported-by: Mark Hounschell <markh@compro.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Wim Osterholt <wim@djo.tudelft.nl> Cc: Kurt Garloff <kurt@garloff.de> Cc: <stable@vger.kernel.org> Signed-off-by: Denis Efremov <efremov@linux.com>
2021-06-30Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Pretty calm round, mostly just NVMe and a bit of MD: - NVMe updates (via Christoph) - improve the APST configuration algorithm (Alexey Bogoslavsky) - look for StorageD3Enable on companion ACPI device (Mario Limonciello) - allow selecting the network interface for TCP connections (Martin Belanger) - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, Christoph) - move the ACPI StorageD3 code to drivers/acpi/ and add quirks for certain AMD CPUs (Mario Limonciello) - zoned device support for nvmet (Chaitanya Kulkarni) - fix the rules for changing the serial number in nvmet (Noam Gottlieb) - various small fixes and cleanups (Dan Carpenter, JK Kim, Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert Uytterhoeven, Daniel Wagner) - MD updates (Via Song) - iostats rewrite (Guoqing Jiang) - raid5 lock contention optimization (Gal Ofri) - Fall through warning fix (Gustavo) - Misc fixes (Gustavo, Jiapeng)" * tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits) nvmet: use NVMET_MAX_NAMESPACES to set nn value loop: Fix missing discard support when using LOOP_CONFIGURE nvme.h: add missing nvme_lba_range_type endianness annotations nvme: remove zeroout memset call for struct nvme-pci: remove zeroout memset call for struct nvmet: remove zeroout memset call for struct nvmet: add ZBD over ZNS backend support nvmet: add Command Set Identifier support nvmet: add nvmet_req_bio put helper for backends nvmet: add req cns error complete helper block: export blk_next_bio() nvmet: remove local variable nvmet: use nvme status value directly nvmet: use u32 type for the local variable nsid nvmet: use u32 for nvmet_subsys max_nsid nvmet: use req->cmd directly in file-ns fast path nvmet: use req->cmd directly in bdev-ns fast path nvmet: make ver stable once connection established nvmet: allow mn change if subsys not discovered nvmet: make sn stable once connection was established ...
2021-06-15floppy: Fix fall-through warning for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/linux-hardening/47bcd36a-6524-348b-e802-0691d1b3c429@kernel.dk/ Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Denis Efremov <efremov@linux.com>
2021-06-15floppy: cleanup: remove redundant assignment to nr_sectorsJiapeng Chong
Variable nr_sectors is set to zero but this value is never read as it is overwritten later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/block/floppy.c:2333:2: warning: Value stored to 'nr_sectors' is never read [clang-analyzer-deadcode.DeadStores]. Link: https://lore.kernel.org/r/1619774805-121562-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Denis Efremov <efremov@linux.com>
2021-06-11floppy: use blk_mq_alloc_disk and blk_cleanup_diskChristoph Hellwig
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210602065345.355274-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-28Merge tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - MD changes via Song: - raid5 POWER fix - raid1 failure fix - UAF fix for md cluster - mddev_find_or_alloc() clean up - Fix NULL pointer deref with external bitmap - Performance improvement for raid10 discard requests - Fix missing information of /proc/mdstat - rsxx const qualifier removal (Arnd) - Expose allocated brd pages (Calvin) - rnbd via Gioh Kim: - Change maintainer - Change domain address of maintainers' email - Add polling IO mode and document update - Fix memory leak and some bug detected by static code analysis tools - Code refactoring - Series of floppy cleanups/fixes (Denis) - s390 dasd fixes (Julian) - kerneldoc fixes (Lee) - null_blk double free (Lv) - null_blk virtual boundary addition (Max) - Remove xsysace driver (Michal) - umem driver removal (Davidlohr) - ataflop fixes (Dan) - Revalidate disk removal (Christoph) - Bounce buffer cleanups (Christoph) - Mark lightnvm as deprecated (Christoph) - mtip32xx init cleanups (Shixin) - Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang) * tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits) async_xor: increase src_offs when dropping destination page drivers/block/null_blk/main: Fix a double free in null_init. md/raid1: properly indicate failure when ending a failed write request md-cluster: fix use-after-free issue when removing rdev nvme: introduce generic per-namespace chardev nvme: cleanup nvme_configure_apst nvme: do not try to reconfigure APST when the controller is not live nvme: add 'kato' sysfs attribute nvme: sanitize KATO setting nvmet: avoid queuing keep-alive timer if it is disabled brd: expose number of allocated pages in debugfs ataflop: fix off by one in ataflop_probe() ataflop: potential out of bounds in do_format() drbd: Fix fall-through warnings for Clang block/rnbd: Use strscpy instead of strlcpy block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name block/rnbd-clt: Remove max_segment_size block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev Documentation/ABI/rnbd-clt: Add description for nr_poll_queues ...
2021-04-20floppy: cleanups: remove FLOPPY_SILENT_DCL_CLEAR undefDenis Efremov
FLOPPY_SILENT_DCL_CLEAR is not defined anywhere and comes from pre-git era. Just drop this undef. There is FD_SILENT_DCL_CLEAR which is really used. Signed-off-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20210416083449.72700-6-efremov@linux.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20floppy: cleanups: use memcpy() to copy reply_bufferDenis Efremov
Use memcpy() in raw_cmd_done() to copy reply_buffer instead of a for loop. Signed-off-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20210416083449.72700-5-efremov@linux.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20floppy: cleanups: use memset() to zero reply_bufferDenis Efremov
Use memset() to zero reply buffer in raw_cmd_copyin() instead of a for loop. Signed-off-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20210416083449.72700-4-efremov@linux.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20floppy: cleanups: use ST0 as reply_buffer index 0Denis Efremov
Use ST0 as 0 index for reply_buffer array. get_fdc_version() is the only function that uses index 0 directly instead of the ST0 define. Signed-off-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20210416083449.72700-3-efremov@linux.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06floppy: always use the track bufferChristoph Hellwig
Always use the track buffer that is already used for addresses outside the 16MB address capability of the floppy controller. This allows to remove a lot of code that relies on kernel virtual addresses. With this gone there is just a single place left that looks at the bio, which can be converted to memcpy_{from,to}_page, thus removing the need for the extra block-layer bounce buffering for highmem pages. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406061755.811522-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-04floppy: reintroduce O_NDELAY fixJiri Kosina
This issue was originally fixed in 09954bad4 ("floppy: refactor open() flags handling"). The fix as a side-effect, however, introduce issue for open(O_ACCMODE) that is being used for ioctl-only open. I wrote a fix for that, but instead of it being merged, full revert of 09954bad4 was performed, re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again. This is a forward-port of the original fix to current codebase; the original submission had the changelog below: ==== Commit 09954bad4 ("floppy: refactor open() flags handling"), as a side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that this is being used setfdprm userspace for ioctl-only open(). Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE) modes, while still keeping the original O_NDELAY bug fixed. Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm Cc: stable@vger.kernel.org Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Tested-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-and-tested-by: Kurt Garloff <kurt@garloff.de> Fixes: 09954bad4 ("floppy: refactor open() flags handling") Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-11-16floppy: use a separate gendisk for each media formatChristoph Hellwig
The floppy driver usually autodetects the media when used with the normal /dev/fd? devices, which also are the only nodes created by udev. But it also supports various aliases that force a given media format. That is currently supported using the blk_register_region framework which finds the floppy gendisk even for a 'mismatched' dev_t. The problem with this (besides the code complexity) is that it creates multiple struct block_device instances for the whole device of a single gendisk, which can lead to interesting issues in code not aware of that fact. To fix this just create a separate gendisk for each of the aliases if they are accessed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10floppy: use bdev_check_media_changeChristoph Hellwig
Switch to use bdev_check_media_change instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-01floppy: use block_sizeChristoph Hellwig
Use the block_size helper instead of open coding it. Also remove the check for a 0 block size, as that can't happen. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26block/floppy: fix contended case in floppy_queue_rq()Jiri Kosina
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case in floppy_queue_rq() is not handled correctly. In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy locked due to another request still being in-flight), we put the request on the list of requests and return BLK_STS_OK to the block core, without actually scheduling delayed work / doing further processing of the request. This means that processing of this request is postponed until another request comes and passess uncontended. Which in some cases might actually never happen and we keep waiting indefinitely. The simple testcase is for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done run in quemu. That reliably causes blkid eventually indefinitely hanging in __floppy_read_block_0() waiting for completion, as the BIO callback never happens, and no further IO is ever submitted on the (non-existent) floppy device. This was observed reliably on qemu-emulated device. Fix that by not queuing the request in the contended case, and return BLK_STS_RESOURCE instead, so that blk core handles the request rescheduling and let it pass properly non-contended later. Fixes: a9f38e1dec107a ("floppy: convert to blk-mq") Cc: stable@vger.kernel.org Tested-by: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12floppy: suppress UBSAN warning in setup_rw_floppy()Denis Efremov
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45 index 16 is out of range for type 'unsigned char [16]' Call Trace: ... setup_rw_floppy+0x5c3/0x7f0 floppy_ready+0x2be/0x13b0 process_one_work+0x2c1/0x5d0 worker_thread+0x56/0x5e0 kthread+0x122/0x170 ret_from_fork+0x35/0x40 From include/uapi/linux/fd.h: struct floppy_raw_cmd { ... unsigned char cmd_count; unsigned char cmd[16]; unsigned char reply_count; unsigned char reply[16]; ... } This out-of-bounds access is intentional. The command in struct floppy_raw_cmd may take up the space initially intended for the reply and the reply count. It is needed for long 82078 commands such as RESTORE, which takes 17 command bytes. Initial cmd size is not enough and since struct setup_rw_floppy is a part of uapi we check that cmd_count is in [0:16+1+16] in raw_cmd_copyin(). The patch adds union with original cmd,reply_count,reply fields and fullcmd field of equivalent size. The cmd accesses are turned to fullcmd where appropriate to suppress UBSAN warning. Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add defines for sizes of cmd & reply buffers of floppy_raw_cmdDenis Efremov
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers for cmd & reply buffers of struct floppy_raw_cmd. Remove local to floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE. FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count and reply fields. Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add FD_AUTODETECT_SIZE define for struct floppy_drive_paramsDenis Efremov
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct floppy_drive_params instead of a magic number. Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: use print_hex_dump() in setup_DMA()Denis Efremov
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the contents of the cmd buffer. Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com Suggested-by: Joe Perches <joe@perches.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make set_fdc() always set current_drive and current_fdWilly Tarreau
When called with a negative drive value, set_fdc() would stick to the current fdc (which was assumed to reflect the current_drive's FDC). We do not need this anymore as the last call place with a negative value was just addressed. Let's make this function always set both current_fdc and current_drive so that there's no more ambiguity. A few comments stating this were added to a few non-obvious places. Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: get rid of current_reqD in favor of current_driveWilly Tarreau
This macro equals -1 and is used as an alternative for current_drive when calling reschedule_timeout(), which in turn needs to remap it. This only adds obfuscation, let's simply use current_drive. Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: make sure to reset all FDCs upon resume()Willy Tarreau
In floppy_resume() we don't properly reinitialize all FDCs, instead we reinitialize the current FDC once per available FDC because value -1 is passed to user_reset_fdc(). Let's simply save the current drive and properly reinitialize each FDC. Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in do_floppy_init()Willy Tarreau
There's no need to iterate on current_fdc in do_floppy_init() anymore, in the first case it's only used as an array index to access fdc_state[], so let's get rid of this confusing assignment. The second case is a bit trickier because user_reset_fdc() needs to already know current_fdc when called with drive==-1 due to this call chain: user_reset_fdc() lock_fdc() set_fdc() drive<0 ==> new_fdc = current_fdc Note that current_drive is not used in this code part and may even not match a unit belonging to current_fdc. Instead of passing -1 we can simply pass the first drive of the FDC being initialized, which is even cleaner as it will allow the function chain above to consistently assign both variables. Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: add a few comments about expectations in certain functionsWilly Tarreau
The locking in the driver is far from being obvious, with unlocking automatically happening at end of operations scheduled by interrupt, especially for the error paths where one does not necessarily expect that such an interrupt may be triggered. Let's add a few comments about what to expect at certain places to avoid misdetecting bugs which are not. Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in DMA grab/release functionsWilly Tarreau
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to iterate on the global variable while setting up or freeing resources. Now that they exclusively rely on functions which take the fdc as an argument, so let's not touch the global one anymore. Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make get_fdc_version() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make next_valid_format() not rely on current_drive anymoreWilly Tarreau
Now the drive is passed in argument so that the function does not use current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make check_wp() not rely on current_{fdc,drive} anymoreWilly Tarreau
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make fdc_specify() not rely on current_{fdc,drive} anymoreWilly Tarreau
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make fdc_configure() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make perpendicular_mode() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single raw_cmd pointer specific to the current fdc. It may make sense to have one per fdc in the future. In addition, cont->done() still relies on the current drive and current raw_cmd. Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make need_more_output() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make result() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single reply_buffer[] which will store the result for the current fdc. It may or may not make sense to implement one buffer per fdc in the future. Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make output_byte() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make wait_til_ready() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make show_floppy() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make reset_fdc_info() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make twaddle() not rely on current_{fdc,drive} anymoreWilly Tarreau
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-10-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: split the base port from the register in I/O accessesWilly Tarreau
Currently we have architecture-specific fd_inb() and fd_outb() functions or macros, taking just a port which is in fact made of a base address and a register. The base address is FDC-specific and derived from the local or global "fdc" variable through the FD_IOPORT macro used in the base address calculation. This change splits this by explicitly passing the FDC's base address and the register separately to fd_outb() and fd_inb(). It affects the following archs: - x86, alpha, mips, powerpc, parisc, arm, m68k: simple remap of port -> base+reg - sparc32: use of reg only, since the base address was already masked out and the FDC controller is known from a static struct. - sparc64: like x86 for PCI, like sparc32 for 82077 Some archs use inline functions and others macros. This was not unified in order to minimize the number of changes to review. For the same reason checkpatch still spews a few warnings about things that were already there before. The parisc still uses hard-coded register values and could be cleaned up by taking the register definitions. The sparc per-controller inb/outb functions could further be refined to explicitly take an FDC register instead of a port in argument but it was not needed yet and may be cleaned later. Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-03-16floppy: rename the global "fdc" variable to "current_fdc"Willy Tarreau
This is done in order to remove the confusion that arises at some places in the code where local variables or arguments shadow the global variable. It is already visible that some places are a bit awkward and iterate over the global variable, for the sole reason that they used to rely on it being named "fdc" in order to get the correct address when using FD_DOR. These ones are easy to spot by searching for "for (current_fdc...". Some more cleanup is definitely possible. For example "fdc_state[current_fdc].somefield" is used all over the code and would probably be better with "fdc_state->somefield" with fdc_state being set when current_fdc is assigned. This would require to pass the pointer to the current state instead of the current_fdc to the I/O functions. Link: https://lore.kernel.org/r/20200301195555.11154-7-w@1wt.eu Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-16floppy: separate the FDC's base address from its registersWilly Tarreau
FDC registers FD_STATUS, FD_DATA, FD_DOR, FD_DIR and FD_DCR used to be defined relative to FD_IOPORT, which is the FDC's base address, itself a macro depending on the "fdc" local or global variable. This patch changes this so that the register macros above now only reference the address offset, and that the FDC's address is explicitly passed in each call to fd_inb() and fd_outb(), thus removing the macro. With this change there is no more implicit usage of the local/global "fdc" variable. One place in the ARM code used to check if the port was equal to FD_DOR, this was changed to testing the register by applying a mask to the port, as was already done in the sparc code. There are still occurrences of fd_inb() and fd_outb() in the PARISC code and these ones remain unaffected since they already used to work with a base address and a register offset. The sparc, m68k and parisc code could now be slightly cleaned up to benefit from the macro definitions above instead of the equivalent hard-coded values. Link: https://lore.kernel.org/r/20200301195555.11154-6-w@1wt.eu Cc: Ian Molton <spyro@f2s.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2024-05-25 07:16:23 +0000